radeon/r200: drop old span depth/stencil code.

This is no longer used with the new renderbuffer code.

Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 0 insertions, 317 deletions

diff --git a/src/mesa/drivers/dri/radeon/radeon_span.c b/src/mesa/drivers/dri/radeon/radeon_span.c
index b25779ecddb..ebacf8ec20f 100644
--- a/src/mesa/drivers/dri/radeon/radeon_span.c
+++ b/src/mesa/drivers/dri/radeon/radeon_span.c
@@ -63,153 +63,6 @@ WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 
 static void radeonSetSpanFunctions(struct radeon_renderbuffer *rrb);
 
-
-/* r200 depth buffer is always tiled - this is the formula
-   according to the docs unless I typo'ed in it
-*/
-#if defined(RADEON_R200)
-static GLubyte *r200_depth_2byte(const struct radeon_renderbuffer * rrb,
-				 GLint x, GLint y)
-{
-    GLubyte *ptr = rrb->bo->ptr + rrb->draw_offset;
-    GLint offset;
-    if (rrb->has_surface) {
-	offset = x * rrb->cpp + y * rrb->pitch;
-    } else {
-	GLuint b;
-	offset = 0;
-	b = (((y  >> 4) * (rrb->pitch >> 8) + (x >> 6)));
-	offset += (b >> 1) << 12;
-	offset += (((rrb->pitch >> 8) & 0x1) ? (b & 0x1) : ((b & 0x1) ^ ((y >> 4) & 0x1))) << 11;
-	offset += ((y >> 2) & 0x3) << 9;
-	offset += ((x >> 3) & 0x1) << 8;
-	offset += ((x >> 4) & 0x3) << 6;
-	offset += ((x >> 2) & 0x1) << 5;
-	offset += ((y >> 1) & 0x1) << 4;
-	offset += ((x >> 1) & 0x1) << 3;
-	offset += (y & 0x1) << 2;
-	offset += (x & 0x1) << 1;
-    }
-    return &ptr[offset];
-}
-
-static GLubyte *r200_depth_4byte(const struct radeon_renderbuffer * rrb,
-				 GLint x, GLint y)
-{
-    GLubyte *ptr = rrb->bo->ptr + rrb->draw_offset;
-    GLint offset;
-    if (rrb->has_surface) {
-	offset = x * rrb->cpp + y * rrb->pitch;
-    } else {
-	GLuint b;
-	offset = 0;
-	b = (((y & 0x7ff) >> 4) * (rrb->pitch >> 7) + (x >> 5));
-	offset += (b >> 1) << 12;
-	offset += (((rrb->pitch >> 7) & 0x1) ? (b & 0x1) : ((b & 0x1) ^ ((y >> 4) & 0x1))) << 11;
-	offset += ((y >> 2) & 0x3) << 9;
-	offset += ((x >> 2) & 0x1) << 8;
-	offset += ((x >> 3) & 0x3) << 6;
-	offset += ((y >> 1) & 0x1) << 5;
-	offset += ((x >> 1) & 0x1) << 4;
-	offset += (y & 0x1) << 3;
-	offset += (x & 0x1) << 2;
-    }
-    return &ptr[offset];
-}
-#endif
-
-
-/* radeon tiling on r300-r500 has 4 states,
-   macro-linear/micro-linear
-   macro-linear/micro-tiled
-   macro-tiled /micro-linear
-   macro-tiled /micro-tiled
-   1 byte surface 
-   2 byte surface - two types - we only provide 8x2 microtiling
-   4 byte surface
-   8/16 byte (unused)
-*/
-static GLubyte *radeon_ptr_4byte(const struct radeon_renderbuffer * rrb,
-			     GLint x, GLint y)
-{
-    GLubyte *ptr = rrb->bo->ptr + rrb->draw_offset;
-    uint32_t mask = RADEON_BO_FLAGS_MACRO_TILE | RADEON_BO_FLAGS_MICRO_TILE;
-    GLint offset;
-
-    if (rrb->has_surface || !(rrb->bo->flags & mask)) {
-        offset = x * rrb->cpp + y * rrb->pitch;
-    } else {
-        offset = 0;
-        if (rrb->bo->flags & RADEON_BO_FLAGS_MACRO_TILE) {
-	    if (rrb->bo->flags & RADEON_BO_FLAGS_MICRO_TILE) {
-		offset = ((y >> 4) * (rrb->pitch >> 7) + (x >> 5)) << 11;
-		offset += (((y >> 3) ^ (x >> 5)) & 0x1) << 10;
-		offset += (((y >> 4) ^ (x >> 4)) & 0x1) << 9;
-		offset += (((y >> 2) ^ (x >> 4)) & 0x1) << 8;
-		offset += (((y >> 3) ^ (x >> 3)) & 0x1) << 7;
-		offset += ((y >> 1) & 0x1) << 6;
-		offset += ((x >> 2) & 0x1) << 5;
-		offset += (y & 1) << 4;
-		offset += (x & 3) << 2;
-            } else {
-		offset = ((y >> 3) * (rrb->pitch >> 8) + (x >> 6)) << 11;
-		offset += (((y >> 2) ^ (x >> 6)) & 0x1) << 10;
-		offset += (((y >> 3) ^ (x >> 5)) & 0x1) << 9;
-		offset += (((y >> 1) ^ (x >> 5)) & 0x1) << 8;
-		offset += (((y >> 2) ^ (x >> 4)) & 0x1) << 7;
-		offset += (y & 1) << 6;
-		offset += (x & 15) << 2;
-            }
-        } else {
-	    offset = ((y >> 1) * (rrb->pitch >> 4) + (x >> 2)) << 5;
-	    offset += (y & 1) << 4;
-	    offset += (x & 3) << 2;
-        }
-    }
-    return &ptr[offset];
-}
-
-static GLubyte *radeon_ptr_2byte_8x2(const struct radeon_renderbuffer * rrb,
-				     GLint x, GLint y)
-{
-    GLubyte *ptr = rrb->bo->ptr + rrb->draw_offset;
-    uint32_t mask = RADEON_BO_FLAGS_MACRO_TILE | RADEON_BO_FLAGS_MICRO_TILE;
-    GLint offset;
-
-    if (rrb->has_surface || !(rrb->bo->flags & mask)) {
-        offset = x * rrb->cpp + y * rrb->pitch;
-    } else {
-        offset = 0;
-        if (rrb->bo->flags & RADEON_BO_FLAGS_MACRO_TILE) {
-            if (rrb->bo->flags & RADEON_BO_FLAGS_MICRO_TILE) {
-		offset = ((y >> 4) * (rrb->pitch >> 7) + (x >> 6)) << 11;
-		offset += (((y >> 3) ^ (x >> 6)) & 0x1) << 10;
-		offset += (((y >> 4) ^ (x >> 5)) & 0x1) << 9;
-		offset += (((y >> 2) ^ (x >> 5)) & 0x1) << 8;
-		offset += (((y >> 3) ^ (x >> 4)) & 0x1) << 7;
-		offset += ((y >> 1) & 0x1) << 6;
-		offset += ((x >> 3) & 0x1) << 5;
-		offset += (y & 1) << 4;
-		offset += (x & 3) << 2;
-            } else {
-		offset = ((y >> 3) * (rrb->pitch >> 8) + (x >> 7)) << 11;
-		offset += (((y >> 2) ^ (x >> 7)) & 0x1) << 10;
-		offset += (((y >> 3) ^ (x >> 6)) & 0x1) << 9;
-		offset += (((y >> 1) ^ (x >> 6)) & 0x1) << 8;
-		offset += (((y >> 2) ^ (x >> 5)) & 0x1) << 7;
-		offset += (y & 1) << 6;
-		offset += ((x >> 4) & 0x1) << 5;
-                offset += (x & 15) << 2;
-            }
-        } else {
-	    offset = ((y >> 1) * (rrb->pitch >> 4) + (x >> 3)) << 5;
-	    offset += (y & 0x1) << 4;
-	    offset += (x & 0x7) << 1;
-        }
-    }
-    return &ptr[offset];
-}
-
 /*
  * Note that all information needed to access pixels in a renderbuffer
  * should be obtained through the gl_renderbuffer parameter, not per-context
@@ -225,16 +78,6 @@ static GLubyte *radeon_ptr_2byte_8x2(const struct radeon_renderbuffer * rrb,
    GLuint p;						\
    (void)p;
 
-#define LOCAL_DEPTH_VARS				\
-   struct radeon_renderbuffer *rrb = (void *) rb;	\
-   int minx = 0, miny = 0;						\
-   const GLint yScale = ctx->DrawBuffer->Name ? 1 : -1;                 \
-   const GLint yBias = ctx->DrawBuffer->Name ? 0 : rrb->base.Height - 1; \
-   int maxx = rb->Width;						\
-   int maxy = rb->Height;
-
-#define LOCAL_STENCIL_VARS LOCAL_DEPTH_VARS
-
 #define Y_FLIP(_y) (_y)
 
 #define HW_LOCK()
@@ -320,166 +163,6 @@ static GLubyte *radeon_ptr_2byte_8x2(const struct radeon_renderbuffer * rrb,
 #define TAG2(x,y) radeon##x##_BGRA8888##y
 #include "spantmp2.h"
 
-#undef Y_FLIP
-#define Y_FLIP(_y) ((_y) * yScale + yBias)
-/* ================================================================
- * Depth buffer
- */
-
-/* The Radeon family has depth tiling on all the time, so we have to convert
- * the x,y coordinates into the memory bus address (mba) in the same
- * manner as the engine.  In each case, the linear block address (ba)
- * is calculated, and then wired with x and y to produce the final
- * memory address.
- * The chip will do address translation on its own if the surface registers
- * are set up correctly. It is not quite enough to get it working with hyperz
- * too...
- */
-
-/* 16-bit depth buffer functions
- */
-#define VALUE_TYPE GLushort
-
-#if defined(RADEON_R200)
-#define WRITE_DEPTH( _x, _y, d )					\
-   *(GLushort *)r200_depth_2byte(rrb, _x, _y) = d
-#else
-#define WRITE_DEPTH( _x, _y, d )					\
-   *(GLushort *)radeon_ptr_2byte_8x2(rrb, _x, _y) = d
-#endif
-
-#if defined(RADEON_R200)
-#define READ_DEPTH( d, _x, _y )						\
-   d = *(GLushort *)r200_depth_2byte(rrb, _x, _y)
-#else
-#define READ_DEPTH( d, _x, _y )						\
-   d = *(GLushort *)radeon_ptr_2byte_8x2(rrb, _x, _y)
-#endif
-
-#define TAG(x) radeon##x##_z16
-#include "depthtmp.h"
-
-/* 24 bit depth
- *
- * Careful: It looks like the R300 uses ZZZS byte order while the R200
- * uses SZZZ for 24 bit depth, 8 bit stencil mode.
- */
-#define VALUE_TYPE GLuint
-
-#if defined(RADEON_R200)
-#define WRITE_DEPTH( _x, _y, d )					\
-do {									\
-   GLuint *_ptr = (GLuint*)r200_depth_4byte( rrb, _x, _y );		\
-   GLuint tmp = LE32_TO_CPU(*_ptr);                                     \
-   tmp &= 0xff000000;							\
-   tmp |= ((d) & 0x00ffffff);						\
-   *_ptr = CPU_TO_LE32(tmp);                                            \
-} while (0)
-#else
-#define WRITE_DEPTH( _x, _y, d )					\
-do {									\
-   GLuint *_ptr = (GLuint*)radeon_ptr_4byte( rrb, _x, _y );	\
-   GLuint tmp = LE32_TO_CPU(*_ptr);                                     \
-   tmp &= 0xff000000;							\
-   tmp |= ((d) & 0x00ffffff);						\
-   *_ptr = CPU_TO_LE32(tmp);                                            \
-} while (0)
-#endif
-
-#if defined(RADEON_R200)
-#define READ_DEPTH( d, _x, _y )						\
-  do {									\
-    d = LE32_TO_CPU(*(GLuint*)(r200_depth_4byte(rrb, _x, _y))) & 0x00ffffff; \
-  }while(0)
-#else
-#define READ_DEPTH( d, _x, _y )	\
-  d = LE32_TO_CPU(*(GLuint*)(radeon_ptr_4byte(rrb, _x,	_y))) & 0x00ffffff;
-#endif
-
-#define TAG(x) radeon##x##_z24
-#include "depthtmp.h"
-
-/* 24 bit depth, 8 bit stencil depthbuffer functions
- * EXT_depth_stencil
- *
- * Careful: It looks like the R300 uses ZZZS byte order while the R200
- * uses SZZZ for 24 bit depth, 8 bit stencil mode.
- */
-#define VALUE_TYPE GLuint
-
-#if defined(RADEON_R200)
-#define WRITE_DEPTH( _x, _y, d )					\
-do {									\
-   GLuint *_ptr = (GLuint*)r200_depth_4byte( rrb, _x, _y );		\
-   *_ptr = CPU_TO_LE32(d);						\
-} while (0)
-#else
-#define WRITE_DEPTH( _x, _y, d )					\
-do {									\
-   GLuint *_ptr = (GLuint*)radeon_ptr_4byte( rrb, _x, _y );	\
-   *_ptr = CPU_TO_LE32(d);						\
-} while (0)
-#endif
-
-#if defined(RADEON_R200)
-#define READ_DEPTH( d, _x, _y )						\
-  do { \
-    d = LE32_TO_CPU(*(GLuint*)(r200_depth_4byte(rrb, _x, _y))); \
-  }while(0)
-#else
-#define READ_DEPTH( d, _x, _y )	do {					\
-    d = LE32_TO_CPU(*(GLuint*)(radeon_ptr_4byte(rrb, _x, _y))); \
-  } while (0)
-#endif
-
-#define TAG(x) radeon##x##_s8_z24
-#include "depthtmp.h"
-
-/* ================================================================
- * Stencil buffer
- */
-
-/* 24 bit depth, 8 bit stencil depthbuffer functions
- */
-#if defined(RADEON_R200)
-#define WRITE_STENCIL( _x, _y, d )					\
-do {									\
-   GLuint *_ptr = (GLuint*)r200_depth_4byte(rrb, _x, _y);		\
-   GLuint tmp = LE32_TO_CPU(*_ptr);                                     \
-   tmp &= 0x00ffffff;							\
-   tmp |= (((d) & 0xff) << 24);						\
-   *_ptr = CPU_TO_LE32(tmp);                                            \
-} while (0)
-#else
-#define WRITE_STENCIL( _x, _y, d )					\
-do {									\
-   GLuint *_ptr = (GLuint*)radeon_ptr_4byte(rrb, _x, _y);		\
-   GLuint tmp = LE32_TO_CPU(*_ptr);                                     \
-   tmp &= 0x00ffffff;							\
-   tmp |= (((d) & 0xff) << 24);						\
-   *_ptr = CPU_TO_LE32(tmp);                                            \
-} while (0)
-#endif
-
-#if defined(RADEON_R200)
-#define READ_STENCIL( d, _x, _y )					\
-do {									\
-   GLuint *_ptr = (GLuint*)r200_depth_4byte( rrb, _x, _y );		\
-   GLuint tmp = LE32_TO_CPU(*_ptr);                                     \
-   d = (tmp & 0xff000000) >> 24;					\
-} while (0)
-#else
-#define READ_STENCIL( d, _x, _y )					\
-do {									\
-   GLuint *_ptr = (GLuint*)radeon_ptr_4byte( rrb, _x, _y );		\
-   GLuint tmp = LE32_TO_CPU(*_ptr);                                     \
-   d = (tmp & 0xff000000) >> 24;					\
-} while (0)
-#endif
-
-#define TAG(x) radeon##x##_s8_z24
-#include "stenciltmp.h"
-
 static void
 radeon_renderbuffer_map(struct gl_context *ctx, struct gl_renderbuffer *rb)
 {