Release 1.6.11.6.1

8 files changed, 257 insertions, 87 deletions

diff --git a/ChangeLog b/ChangeLog
index 7624c63996..b22e523561 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,9 +1,200 @@
+=== release 1.6.1 ===
+
+2015-10-30  Sebastian Dröge <slomo@coaxion.net>
+
+	* configure.ac:
+	  releasing 1.6.1
+
+2015-10-30 14:09:00 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* po/cs.po:
+	* po/de.po:
+	* po/nl.po:
+	* po/pl.po:
+	* po/ru.po:
+	* po/uk.po:
+	* po/vi.po:
+	* po/zh_CN.po:
+	  po: Update translations
+
+2015-10-28 18:04:46 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/gstpad.c:
+	  pad: Unblock blocking pad probes when receiving FLUSH_START in send_event() too
+	  Without this, flushing might not unblock the streaming thread and cause deadlocks.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=757257
+
+2015-10-24 16:43:59 +0100  Florin Apostol <florin.apostol@oregan.net>
+
+	* tests/check/gst/gsturi.c:
+	  uri: tests: added unit test for streams ending in .. without following /
+	  https://bugzilla.gnome.org/show_bug.cgi?id=757065
+
+2015-10-19 16:50:51 +0300  Vivia Nikolaidou <vivia@ahiru.eu>
+
+	* gst/gstsegment.c:
+	* tests/check/gst/gstsegment.c:
+	  segment: Correct stream_time calc for negative applied rate
+	  Updated gst_segment_position_from_stream_time and gst_segment_to_stream_time to reflect correct calculations for the case when the applied rate is negative.
+	  Pasting from design docs:
+	  ===============================
+	  Stream time is calculated using the buffer times and the preceding SEGMENT
+	  event as follows:
+	  stream_time = (B.timestamp - S.start) * ABS (S.applied_rate) + S.time
+	  For negative rates, B.timestamp will go backwards from S.stop to S.start,
+	  making the stream time go backwards.
+	  ===============================
+	  Therefore, the calculation for applied_rate < 0 should be:
+	  stream_time = (S.stop - B.timestamp) * ABS (S.applied_rate) + S.time
+	  and the reverse:
+	  B.timestamp = S.stop - (stream_time - S.time) / ABS (S.applied_rate)
+	  https://bugzilla.gnome.org/show_bug.cgi?id=756810
+
+2015-09-25 15:57:16 +0300  Vivia Nikolaidou <vivia@toolsonair.com>
+
+	* gst/gstsegment.c:
+	  segment: gst_segment_to_stream_time: Renamed 'result' to 'stream_time'
+	  Renamed the "result" variable to "stream_time" for better readability.
+
+2015-10-24 16:52:44 +0100  Florin Apostol <florin.apostol@oregan.net>
+
+	* gst/gsturi.c:
+	  uri: fix behaviour for merging uris ending in .. without following /
+	  https://bugzilla.gnome.org/show_bug.cgi?id=757065
+
+2015-10-21 14:49:49 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/gstpad.c:
+	  pad: Fix docs/annotation of gst_pad_probe_info_get_buffer_list()
+	  It's not get_bufferlist(). Because of that it was ignored by the docs and
+	  G-I, leading to crashes because of broken ownership transfer.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=756898
+
+2015-10-17 22:13:08 +0300  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/gstbin.c:
+	  bin: Make sure to free all cached messages when going to NULL
+	  An ASYNC READY->PAUSED might have failed without the bin code noticing during
+	  the state change, in which case we will never get PAUSED->READY and would leak
+	  messages.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=756611
+
+2015-10-15 16:32:42 +0200  Edward Hervey <edward@centricular.com>
+
+	* plugins/elements/gstmultiqueue.c:
+	  multiqueue: Improve incoming SEGMENT handling
+	  Previously this code was just blindly setting the cached flow return
+	  of downstream to GST_FLOW_OK when we get a SEGMENT.
+	  The problem is that this can not be done blindly. If downstream was
+	  not linked, the corresponding sinqlequeue source pad thread might be
+	  waiting for the next ID to be woken up upon.
+	  By blindly setting the cached return value to GST_FLOW_OK, and if that
+	  stream was the only one that was NOT_LINKED, then the next time we
+	  check (from any other thread) to see if we need to wake up a source pad
+	  thread ... we won't even try, because none of the cached flow return
+	  are equal to GST_FLOW_NOT_LINKED.
+	  This would result in that thread never being woken up
+	  https://bugzilla.gnome.org/show_bug.cgi?id=756645
+
+2015-10-12 17:29:26 +0200  Edward Hervey <edward@centricular.com>
+
+	* libs/gst/base/gstbaseparse.c:
+	  baseparse: Update internal position even if not linked
+	  Our current position has nothing to do with being linked or not.
+	  Avoids having stray segment updates fired every 2s
+
+2015-10-05 21:29:49 +0200  Stefan Sauer <ensonic@users.sf.net>
+
+	* tests/check/gst/gsttag.c:
+	  tests: fix the tag test
+	  The previous change (see bgo #756069) was causing us to free the same pointer
+	  multiple times. If we actually get a sample back, the test fails, no need to
+	  free anything in that case.
+
+2015-10-05 11:12:47 +0900  Vineeth TM <vineeth.tm@samsung.com>
+
+	* tests/check/gst/gsttag.c:
+	* tools/gst-launch.c:
+	  tests/gst-launch: Fix sample memory leak
+	  When sample is got using gst_tag_list_get_sample_index, it should
+	  be free'd.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=756069
+
+2015-10-07 11:25:52 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* libs/gst/helpers/gst-ptp-helper.c:
+	  gst-ptp-helper: #include <sys/socket.h> to fix net/if.h include on OSX 10.6
+	  In file included from gst-ptp-helper.c:40:0:
+	  /usr/include/net/if.h:265:19: error: field 'ifru_addr' has incomplete type
+	  struct sockaddr ifru_addr;
+	  https://bugzilla.gnome.org/show_bug.cgi?id=756136
+
+2015-09-28 16:01:55 +0100  Tim-Philipp Müller <tim@centricular.com>
+
+	* libs/gst/check/gstcheck.c:
+	  check: fix 'format string is not a string literal' warning with clang
+	  Broke this when I removed the G_GNUC_PRINTF in a previous
+	  commit to fix indentation, since it was not really needed.
+	  Turns out unlike gcc clang warns though if a non-literal
+	  format string is passed then. Fix indentation differently.
+	  http://clang.llvm.org/docs/AttributeReference.html#format-gnu-format
+
 === release 1.6.0 ===
 
-2015-09-25  Sebastian Dröge <slomo@coaxion.net>
+2015-09-25 23:14:33 +0200  Sebastian Dröge <sebastian@centricular.com>
 
+	* ChangeLog:
+	* NEWS:
+	* RELEASE:
 	* configure.ac:
-	  releasing 1.6.0
+	* docs/plugins/inspect/plugin-coreelements.xml:
+	* gstreamer.doap:
+	* win32/common/config.h:
+	* win32/common/gstversion.h:
+	  Release 1.6.0
+
+2015-09-25 22:41:16 +0200  Sebastian Dröge <sebastian@centricular.com>
+
+	* po/af.po:
+	* po/az.po:
+	* po/be.po:
+	* po/bg.po:
+	* po/ca.po:
+	* po/cs.po:
+	* po/da.po:
+	* po/de.po:
+	* po/el.po:
+	* po/en_GB.po:
+	* po/eo.po:
+	* po/es.po:
+	* po/eu.po:
+	* po/fi.po:
+	* po/fr.po:
+	* po/gl.po:
+	* po/hr.po:
+	* po/hu.po:
+	* po/id.po:
+	* po/it.po:
+	* po/ja.po:
+	* po/lt.po:
+	* po/nb.po:
+	* po/nl.po:
+	* po/pl.po:
+	* po/pt_BR.po:
+	* po/ro.po:
+	* po/ru.po:
+	* po/rw.po:
+	* po/sk.po:
+	* po/sl.po:
+	* po/sq.po:
+	* po/sr.po:
+	* po/sv.po:
+	* po/tr.po:
+	* po/uk.po:
+	* po/vi.po:
+	* po/zh_CN.po:
+	* po/zh_TW.po:
+	  Update .po files
 
 2015-09-25 10:18:07 +0900  Vineeth TM <vineeth.tm@samsung.com>
 
diff --git a/NEWS b/NEWS
index e04f318449..436340b7ea 100644
--- a/NEWS
+++ b/NEWS
@@ -1,64 +1,30 @@
-This is GStreamer 1.6.0
+This is GStreamer 1.6.1
 
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
+The GStreamer team is proud to announce the first bugfix release in the stable
+1.6 release series of your favourite cross-platform multimedia framework!
 
-This release has been in the works for more than a year and is packed with new
-features, bug fixes and other improvements.
+This release only contains bugfixes and it is safe to update from 1.6.0. For a
+full list of bugfixes see Bugzilla:
+  https://bugzilla.gnome.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&limit=0&list_id=73005&order=bug_id&product=GStreamer&resolution=FIXED&target_milestone=1.6.1
 
-See http://gstreamer.freedesktop.org/releases/1.6/ for the full list of
-changes.
+See http://gstreamer.freedesktop.org/releases/1.6/ for the latest version of this document.
 
-Highlights
+Major bugfixes
+
+- Crashes in the gst-libav encoders were fixed
+- More DASH-IF test streams are working now
+- Live DASH, HLS and MS SmoothStreaming streams work more reliable and other
+  fixes for the adaptive streaming protocols
+- Reverse playback works with scaletempo to keep the audio pitch
+- Correct stream-time is reported for negative applied_rate
+- SRTP packet validation during decoding does not reject valid packets anymore
+- Fixes for audioaggregator and aggregator to start producing output at the
+  right time, and e.g. not outputting lots of silence in the beginning
+- gst-libav's internal ffmpeg snapshot was updated to 2.8.1
+- cerbero has support for Mac OS X 10.11 (El Capitan)
+- Various memory leaks were fixed, including major leaks in playbin, playsink
+  and decodebin
+- Various GObject-Introspection annotation fixes for bindings
+- and many, many more: https://bugzilla.gnome.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&limit=0&list_id=73005&order=bug_id&product=GStreamer&resolution=FIXED&target_milestone=1.6.1
 
-- Stereoscopic 3D and multiview video support
-- Trick mode API for key-frame only fast-forward/fast-reverse playback etc.
-- Improved DTS (decoding timestamp) vs. PTS (presentation timestamp) handling
-  to account for negative DTS
-- New GstVideoConverter API for more optimised and more correct conversion of
-  raw video frames between all supported formats, with rescaling
-- v4l2src now supports renegotiation
-- v4l2transform can now do scaling
-- V4L2 Element now report Colorimetry properly
-- Easier chunked recording of MP4, Matroska, Ogg, MPEG-TS: new splitmuxsink
-  and multifilesink improvements
-- Content Protection signalling API and Common Encryption (CENC) support for
-  DASH/MP4
-- Many adaptive streaming (DASH, HLS and MSS) improvements
-- New PTP and NTP network client clocks and better remote clock tracking
-  stability
-- High-quality text subtitle overlay at display resolutions with glimagesink
-  or gtkglsink
-- RECORD support for the GStreamer RTSP Server
-- Retransmissions (RTX) support in RTSP server and client
-- RTSP seeking support in client and server has been fixed
-- RTCP scheduling improvements and reduced size RTCP support
-- MP4/MOV muxer acquired a new "robust" mode of operation which attempts to
-  keep the output file in a valid state at all times
-- Live mixing support in aggregator, audiomixer and compositor was improved a
-  lot
-- compositor now supports rescaling and converting inputs streams on the fly
-- New audiointerleave element with proper input synchronisation and live input
-  support
-- Blackmagic Design DeckLink capture and playback card support was rewritten
-  from scratch; 2k/4k support; mode sensing
-- KLV metadata support in RTP and MPEG-TS
-- H.265 video encoder (x265), decoders (libav, libde265) and RTP payloader and
-  depayloaders
-- New DTLS plugin and SRTP/DTLS support
-- OpenGL3 support, multiple contexts and context propagation, 3D video,
-  transfer/conversion separation, subtitle blending
-- New OpenGL-based QML video sink, Gtk GL video sink, CoreAnimation
-  CAOpenGLLayerSink video sink
-- gst-libav switched to ffmpeg as libav-provider, gains support for
-  3D/multiview video, trick modes, and the CAVS codec
-- GstHarness API for unit tests
-- gst-editing-services got a completely new ges-launch-1.0 interface, improved
-  mixing support and integration into gst-validate
-- gnonlin has been deprecated in favor of nle (Non Linear Engine) in
-  gst-editing-services
-- gst-validate has a new plugin system, an extensive default testsuite,
-  support for concurrent test runs and valgrind support
-- cerbero build tool for SDK binary packages gains new 'bundle-source' command
-- Various improvements to the Android, iOS, OS X and Windows platform support
 
diff --git a/RELEASE b/RELEASE
index 21263cd533..b4faf6c63c 100644
--- a/RELEASE
+++ b/RELEASE
@@ -1,18 +1,19 @@
 
-Release notes for GStreamer 1.6.0
+Release notes for GStreamer 1.6.1
 
 
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
+The GStreamer team is proud to announce the first bugfix release in the stable
+1.6 release series of your favourite cross-platform multimedia framework!
 
 
-This release has been in the works for more than a year and is packed with new
-features, bug fixes and other improvements.
 
+This release only contains bugfixes and it is safe to update from 1.6.0. For a
+full list of bugfixes see Bugzilla.
 
-See
-http://gstreamer.freedesktop.org/releases/1.6/
-for the full list of changes.
+
+
+See http://gstreamer.freedesktop.org/releases/1.6/
+for the full release notes.
 
 
 
@@ -39,13 +40,14 @@ contains a set of codecs plugins based on libav (formerly gst-ffmpeg)
 
 Bugs fixed in this release
      
-      * 753887 : queue2: " Process SEEKING query " ok, but should handle SEEK events too (regression with non-seekable sources)
-      * 755141 : inputselector: fix buffer leak
-      * 755257 : Minor documentation typo in gstpad & gstcaps APIs
-      * 755342 : element: state_change may fail because of release_request_pad (racy)
-      * 755343 : funnel: Fix racy state change
-      * 755511 : gstharness: don't crash when adding a sink-harness without h- > sinkpad
-      * 755607 : ptpclock: Fix error leak during failures
+      * 747612 : Valgrind 3.7.0 chokes on match-leak-kinds in gst.supp
+      * 756069 : Gstreamer: Fix sample memory leaks
+      * 756136 : gstreamer-1.6.0 doesn't compile on OS X 10.6: header file issue in gst-ptp-helper.c
+      * 756645 : multiqueue: Improve incoming SEGMENT handling
+      * 756810 : segment_to_stream_time and position_from_stream_time miscalculate when applied_rate < 0
+      * 756898 : pad: gst_pad_probe_info_get_buffer_list() has wrong ownership transfer
+      * 757065 : uri: incorrect behavior when merging uris ending in ..
+      * 757257 : pad: Unblock blocking pad probes when receiving FLUSH_START in send_event() too
 
 ==== Download ====
 
@@ -82,10 +84,11 @@ subscribe to the gstreamer-devel list.
         
 Contributors to this release
     
-      * Eunhae Choi
-      * Havard Graff
+      * Edward Hervey
+      * Florin Apostol
       * Sebastian Dröge
-      * Stian Selnes
-      * Vikram Fugro
+      * Stefan Sauer
+      * Tim-Philipp Müller
       * Vineeth TM
+      * Vivia Nikolaidou
  
\ No newline at end of file
diff --git a/configure.ac b/configure.ac
index d5e945cf80..03729c673d 100644
--- a/configure.ac
+++ b/configure.ac
@@ -4,7 +4,7 @@ dnl initialize autoconf
 dnl when going to/from release please set the nano (fourth number) right !
 dnl releases only do Wall, git and prerelease does Werror too
 dnl
-AC_INIT([GStreamer],[1.6.0],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer])
+AC_INIT([GStreamer],[1.6.1],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer])
 AG_GST_INIT
 
 dnl initialize automake (we require GNU make)
@@ -62,7 +62,7 @@ dnl      1.2.5 => 205
 dnl      1.10.9 (who knows) => 1009
 dnl
 dnl sets GST_LT_LDFLAGS
-AS_LIBTOOL(GST, 600, 0, 600)
+AS_LIBTOOL(GST, 601, 0, 601)
 
 dnl *** autotools stuff ****
 
diff --git a/docs/plugins/inspect/plugin-coreelements.xml b/docs/plugins/inspect/plugin-coreelements.xml
index 9785ec5579..7bb38227b3 100644
--- a/docs/plugins/inspect/plugin-coreelements.xml
+++ b/docs/plugins/inspect/plugin-coreelements.xml
@@ -3,7 +3,7 @@
   <description>GStreamer core elements</description>
   <filename>../../plugins/elements/.libs/libgstcoreelements.so</filename>
   <basename>libgstcoreelements.so</basename>
-  <version>1.6.0</version>
+  <version>1.6.1</version>
   <license>LGPL</license>
   <source>gstreamer</source>
   <package>GStreamer source release</package>
diff --git a/gstreamer.doap b/gstreamer.doap
index e61c2d6146..efbbc432dc 100644
--- a/gstreamer.doap
+++ b/gstreamer.doap
@@ -40,6 +40,16 @@ hierarchy, and a set of media-agnostic core elements.
 
  <release>
   <Version>
+   <revision>1.6.1</revision>
+   <branch>1.6</branch>
+   <name></name>
+   <created>2015-10-30</created>
+   <file-release rdf:resource="http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.6.1.tar.xz" />
+  </Version>
+ </release>
+
+ <release>
+  <Version>
    <revision>1.6.0</revision>
    <branch>1.6</branch>
    <name></name>
diff --git a/win32/common/config.h b/win32/common/config.h
index b11523f4b8..223d614424 100644
--- a/win32/common/config.h
+++ b/win32/common/config.h
@@ -65,7 +65,7 @@
 #define GST_PACKAGE_ORIGIN "Unknown package origin"
 
 /* GStreamer package release date/time for plugins as YYYY-MM-DD */
-#define GST_PACKAGE_RELEASE_DATETIME "2015-09-25"
+#define GST_PACKAGE_RELEASE_DATETIME "2015-10-30"
 
 /* Define if static plugins should be built */
 #undef GST_PLUGIN_BUILD_STATIC
@@ -454,7 +454,7 @@
 #define PACKAGE_NAME "GStreamer"
 
 /* Define to the full name and version of this package. */
-#define PACKAGE_STRING "GStreamer 1.6.0"
+#define PACKAGE_STRING "GStreamer 1.6.1"
 
 /* Define to the one symbol short name of this package. */
 #define PACKAGE_TARNAME "gstreamer"
@@ -463,7 +463,7 @@
 #undef PACKAGE_URL
 
 /* Define to the version of this package. */
-#define PACKAGE_VERSION "1.6.0"
+#define PACKAGE_VERSION "1.6.1"
 
 /* directory where plugins are located */
 #ifdef _DEBUG
@@ -507,7 +507,7 @@
 #undef USE_POISONING
 
 /* Version number of package */
-#define VERSION "1.6.0"
+#define VERSION "1.6.1"
 
 /* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
    significant byte first (like Motorola and SPARC, unlike Intel). */
diff --git a/win32/common/gstversion.h b/win32/common/gstversion.h
index 5e5b8e1685..0ca2de571a 100644
--- a/win32/common/gstversion.h
+++ b/win32/common/gstversion.h
@@ -60,7 +60,7 @@ G_BEGIN_DECLS
  *
  * The micro version of GStreamer at compile time:
  */
-#define GST_VERSION_MICRO (0)
+#define GST_VERSION_MICRO (1)
 /**
  * GST_VERSION_NANO:
  *