summaryrefslogtreecommitdiff
path: root/drivers/iio/humidity/dht11.c
AgeCommit message (Collapse)AuthorFilesLines
2022-02-06iio: humidity: dht11: Switch from of headers to mod_devicetable.hAndy Shevchenko1-2/+1
There is nothing directly using of specific interfaces in this driver, so lets not include the headers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220202203420.56654-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14iio: remove left-over parent assignmentsAlexandru Ardelean1-1/+0
These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-01-12iio: humidity: dht11 remove TODO since it doesn't make senseKent Gustavsson1-1/+0
DHT11 isn't addressable and will trigger temperature measurement on any data sent on the bus. Signed-off-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-11Merge tag 'staging-5.3-rc1' of ↵Linus Torvalds1-18/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the big Staging and IIO driver update for 5.3-rc1. Lots of new IIO drivers are in here, along with loads of tiny staging driver cleanups and fixes. Overall we almost break even with the same lines added as removed. Full details are in the shortlog, they are too large to list here. All of these changes have been in linux-next for a while with no reported issues" * tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (608 commits) staging: kpc2000: simplify comparison to NULL in fileops.c staging: kpc2000: simplify comparison to NULL in dma.c staging: kpc2000: simplify comparison to NULL in kpc2000_spi.c staging: rtl8723bs: hal: remove redundant assignment to packetType staging: rtl8723bs: Change return type of hal_btcoex_IsBtDisabled() staging: rtl8723bs: Remove rtw_btcoex_DisplayBtCoexInfo() staging: rtl8723bs: Remove function rtw_btcoex_GetDBG() staging: rtl8723bs: Remove function rtw_btcoex_SetDBG() staging: rtl8723bs: Remove rtw_btcoex_IsBTCoexCtrlAMPDUSize() staging: rtl8723bs: Remove rtw_btcoex_BtInfoNotify() staging: rtl8723bs: Remove rtw_btcoex_ScanNotify() staging: rtl8723bs: Remove rtw_btcoex_SetSingleAntPath() staging: rtl8723bs: Remove rtw_btcoex_SetPGAntNum() staging: rtl8192e: remove redundant initialization of rtstatus staging: rtl8723bs: Remove rtw_btcoex_GetRaMask() staging: rtl8723bs: Remove rtw_btcoex_SetChipType() staging: rtl8723bs: Remove rtw_btcoex_ConnectNotify() staging: rtl8723bs: Remove rtw_btcoex_SetBTCoexist() staging: rtl8723bs: Remove rtw_btcoex_IsBtDisabled() staging: rtl8723bs: Remove rtw_btcoex_IsBtControlLps() ...
2019-07-01Merge tag 'iio-for-5.3b' of ↵Greg Kroah-Hartman1-18/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...
2019-06-22timekeeping: Use proper clock specifier names in functionsJason A. Donenfeld1-4/+4
This makes boot uniformly boottime and tai uniformly clocktai, to address the remaining oversights. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-06-17iio: humidity: Replace older GPIO APIs with GPIO Consumer APIs for the dht11 ↵Shobhit Kukreti1-18/+10
sensor The dht11 driver uses a single gpio to make measurements. It was using the older global gpio numberspace. The patch replaces the old gpio api with the new gpio descriptor based api. Removed header files "linux/gpio.h" and "linux/of_gpio.h" Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com> Acked-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17iio: dht11: Improve detection of sensor typeHarald Geyer1-1/+1
The old code was based on a DHT11 datasheet which specifies a measurement range of 20%-90% RH. Turns out the sensor actually reports values outside this range, so we should support it as far as possible. Reported-by: Edward Attfield <edward@attfield.ca> Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-22iio:humidity: drop assign iio_info.driver_module and iio_trigger_ops.ownerJonathan Cameron1-1/+0
The equivalent of both of these are now done via macro magic when the relevant register calls are made. The actual structure elements will shortly go away. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-01-22iio: dht11: Use usleep_range instead of msleep for start signalJohn Brooks1-2/+4
The DHT22 (AM2302) datasheet specifies that the LOW start pulse should not exceed 20ms. However, observations with an oscilloscope of an RPi Model 2B (rev 1.1) communicating with a DHT22 sensor showed that the driver was consistently sending start pulses longer than 20ms: Kernel 4.7.10-v7+ (n=132): Minimum pulse length: 20.20ms Maximum: 29.84ms Mean: 24.96ms StDev: 2.82ms Sensor response rate: 100% Read success rate: 76% On kernel 4.8, the start pulse was so long that the sensor would not even respond 97% of the time: Kernel 4.8.16-v7+ (n=100): Minimum pulse length: 30.4ms Maximum: 74.4ms Mean: 39.3ms StDev: 10.2ms Sensor response rate: 3% Read success rate: 3% The driver would return ETIMEDOUT and write log messages like this: [ 51.430987] dht11 dht11@0: Only 1 signal edges detected [ 66.311019] dht11 dht11@0: Only 0 signal edges detected Replacing msleep(18) with usleep_range(18000, 20000) made the pulse length sane again and restored responsiveness: Kernel 4.8.16-v7+ with usleep_range (n=123): Minimum pulse length: 18.16ms Maximum: 20.20ms Mean: 19.85ms StDev: 0.51ms Sensor response rate: 100% Read success rate: 84% Cc: stable@vger.kernel.org Signed-off-by: John Brooks <john@fastquake.com> Reviewed-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-10iio: dht11: Improve loggingHarald Geyer1-6/+34
* Unify log messages * Add more DEBUG messages Apparently this driver is working unreliably on some platforms that I can't test. Therefore I want an easy way for bug reporters to provide useful information without making the driver too chatty by default. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-07Merge 4.5-rc3 into staging-nextGreg Kroah-Hartman1-4/+4
We want the upstream staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-01iio: dht11: Use boottimeAbhilash Jindal1-4/+4
Wall time obtained from ktime_get_real_ns is susceptible to sudden jumps due to user setting the time or due to NTP. Boot time is constantly increasing time better suited for comparing two timestamps. Signed-off-by: Abhilash Jindal <klock.android@gmail.com> Reviewed-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: dht11: Simplify decoding algorithmHarald Geyer1-22/+42
The new algorithm uses a 'one size fits em all' threshold, which should be easier to understand and debug. I believe there are no regressions compared to the old adaptive threshold algorithm. I don't remember why I chose the old algorithm when I initially wrote the driver. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30iio: dht11: Improve reliability - be more tolerant about missing start bitsHarald Geyer1-6/+9
Instead of guessing where the data starts, we now just try to decode from every possible start position. This causes no additional overhead if we properly received the full preamble and only costs a few extra CPU cycles in the case where the preamble is corrupted. This is much more efficient than to return an error to userspace and start over again. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20iio: dht11: Use new function ktime_get_resolution_ns()Harald Geyer1-20/+22
This cleans up the most ugly workaround in this driver. There are no functional changes yet in the decoding algorithm, but we improve the following things: * Get rid of spurious warning messages on systems with fast HRTIMER. * If the clock is not fast enough for decoding to work, we give up immediately. * In that case we return EAGAIN instead of EIO, so it's easier to discriminate causes of failure. Returning EAGAIN is somewhat controversial: It's technically correct as a faster clock might become available. OTOH once all clocks are enabled this is a permanent error. There is no ECLOCKTOOSLOW error code. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20iio: dht11: avoid multiple assignments to make checkpatch.pl --strict happyHarald Geyer1-1/+2
We just do the assignments in two steps. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20iio: dht11: add comment to make checkpatch.pl --strict happyHarald Geyer1-0/+1
Explain why the driver needs a mutex. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-20iio: dht11: whitespace changes to make checkpatch.pl --strict happyHarald Geyer1-12/+13
* add spaces around binary operators in cases where it reduces readability * align multiline statements around opening parenthesis Reported-by: Hartmut Knaack <knaack.h@gmx.de> in Message-ID: <55919E72.3010807@gmx.de> Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-10iio: dht11: IRQ fixesRichard Weinberger1-27/+35
Since setting irq-enabled GPIOs into output state is not supported by all GPIO controllers, we need to disable the irq while requesting sensor data. As side effect we lose a tiny bit of functionality: Some wiring problems can't be concluded from log messages anymore. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-10iio: dht11: Add lockingRichard Weinberger1-0/+5
Make sure that the read function is not interrupted... Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Harald Geyer <harald@ccbib.org> Reviewed-by: Sanjeev Sharma <sanjeev_sharma@mentor.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-10iio: dht11: Fix out-of-bounds readRichard Weinberger1-1/+1
As we access i-1 we must not start with i=0. Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Harald Geyer <harald@ccbib.org> Reviewed-by: Sanjeev Sharma <sanjeev_sharma@mentor.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26iio: remove .owner field for driver using module_platform_driverSanjeev Sharma1-1/+0
This patch removes the .owner field for drivers which use the platform_driver_register api because this is overriden in _platform_driver_register. Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-12-03iio: Add new driver dht11Harald Geyer1-0/+294
This driver handles DHT11 and DHT22 sensors. Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-08 16:05:22 +0000