Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits)
  ARM: 6411/1: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
  ARM: 6409/1: davinci: map sram using MT_MEMORY_NONCACHED instead of MT_DEVICE
  ARM: 6408/1: omap: Map only available sram memory
  ARM: 6407/1: mmu: Setup MT_MEMORY and MT_MEMORY_NONCACHED L1 entries
  ARM: pxa: remove pr_<level> uses of KERN_<level>
  ARM: pxa168fb: clear enable bit when not active
  ARM: pxa: fix cpu_is_pxa*() not expanding to zero when not configured
  ARM: pxa168: fix corrected reset vector
  ARM: pxa: Use PIO for PI2C communication on Palm27x
  ARM: pxa: Fix Vpac270 gpio_power for MMC
  ARM: 6401/1: plug a race in the alignment trap handler
  ARM: 6406/1: at91sam9g45: fix i2c bus speed
  leds: leds-ns2: fix locking
  ARM: dove: fix __io() definition to use bus based offset
  dmaengine: fix interrupt clearing for mv_xor
  ARM: kirkwood: Unbreak PCIe I/O port
  ARM: Fix build error when using KCONFIG_CONFIG
  ARM: 6383/1: Implement phys_mem_access_prot() to avoid attributes aliasing
  ARM: 6400/1: at91: fix arch_gettimeoffset fallout
  ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
  ...

1 files changed, 12 insertions, 21 deletions

diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ea3ca86c5283..aedf9c1d645e 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-nomadik/timer.c
+ *  linux/arch/arm/plat-nomadik/timer.c
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
@@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 		cr = readl(mtu_base + MTU_CR(1));
 		writel(0, mtu_base + MTU_LR(1));
 		writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
-		writel(0x2, mtu_base + MTU_IMSC);
+		writel(1 << 1, mtu_base + MTU_IMSC);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
@@ -131,25 +131,23 @@ void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk0;
-	struct clk *clk1;
-	u32 cr;
+	u32 cr = MTU_CRn_32BITS;
 
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
 
-	clk1 = clk_get_sys("mtu1", NULL);
-	BUG_ON(IS_ERR(clk1));
-
 	clk_enable(clk0);
-	clk_enable(clk1);
 
 	/*
-	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
-	 * use a divide-by-16 counter if it's more than 16MHz
+	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
+	 * for ux500.
+	 * Use a divide-by-16 counter if the tick rate is more than 32MHz.
+	 * At 32 MHz, the timer (with 32 bit counter) can be programmed
+	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
+	 * with 16 gives too low timer resolution.
 	 */
-	cr = MTU_CRn_32BITS;;
 	rate = clk_get_rate(clk0);
-	if (rate > 16 << 20) {
+	if (rate > 32000000) {
 		rate /= 16;
 		cr |= MTU_CRn_PRESCALE_16;
 	} else {
@@ -170,15 +168,8 @@ void __init nmdk_timer_init(void)
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
-	/* Timer 1 is used for events, fix according to rate */
-	cr = MTU_CRn_32BITS;
-	rate = clk_get_rate(clk1);
-	if (rate > 16 << 20) {
-		rate /= 16;
-		cr |= MTU_CRn_PRESCALE_16;
-	} else {
-		cr |= MTU_CRn_PRESCALE_1;
-	}
+	/* Timer 1 is used for events */
+
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
 
 	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */