summaryrefslogtreecommitdiff
path: root/include/linux/buffer_head.h
AgeCommit message (Collapse)AuthorFilesLines
2017-07-10Merge tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-0/+2
Pull XFS updates from Darrick Wong: "Here are some changes for you for 4.13. For the most part it's fixes for bugs and deadlock problems, and preparation for online fsck in some future merge window. - Avoid quotacheck deadlocks - Fix transaction overflows when bunmapping fragmented files - Refactor directory readahead - Allow admin to configure if ASSERT is fatal - Improve transaction usage detail logging during overflows - Minor cleanups - Don't leak log items when the log shuts down - Remove double-underscore typedefs - Various preparation for online scrubbing - Introduce new error injection configuration sysfs knobs - Refactor dq_get_next to use extent map directly - Fix problems with iterating the page cache for unwritten data - Implement SEEK_{HOLE,DATA} via iomap - Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA - Don't use MAXPATHLEN to check on-disk symlink target lengths" * tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits) xfs: don't crash on unexpected holes in dir/attr btrees xfs: rename MAXPATHLEN to XFS_SYMLINK_MAXLEN xfs: fix contiguous dquot chunk iteration livelock xfs: Switch to iomap for SEEK_HOLE / SEEK_DATA vfs: Add iomap_seek_hole and iomap_seek_data helpers vfs: Add page_cache_seek_hole_data helper xfs: remove a whitespace-only line from xfs_fs_get_nextdqblk xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent xfs: Check for m_errortag initialization in xfs_errortag_test xfs: grab dquots without taking the ilock xfs: fix semicolon.cocci warnings xfs: Don't clear SGID when inheriting ACLs xfs: free cowblocks and retry on buffered write ENOSPC xfs: replace log_badcrc_factor knob with error injection tag xfs: convert drop_writes to use the errortag mechanism xfs: remove unneeded parameter from XFS_TEST_ERROR xfs: expose errortag knobs via sysfs xfs: make errortag a per-mountpoint structure xfs: free uncommitted transactions during log recovery xfs: don't allow bmap on rt files ...
2017-07-06buffer: set errors in mapping at the time that the error occursJeff Layton1-0/+1
I noticed on xfs that I could still sometimes get back an error on fsync on a fd that was opened after the error condition had been cleared. The problem is that the buffer code sets the write_io_error flag and then later checks that flag to set the error in the mapping. That flag perisists for quite a while however. If the file is later opened with O_TRUNC, the buffers will then be invalidated and the mapping's error set such that a subsequent fsync will return error. I think this is incorrect, as there was no writeback between the open and fsync. Add a new mark_buffer_write_io_error operation that sets the flag and the error in the mapping at the same time. Replace all calls to set_buffer_write_io_error with mark_buffer_write_io_error, and remove the places that check this flag in order to set the error in the mapping. This sets the error in the mapping earlier, at the time that it's first detected. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2017-07-02vfs: Add page_cache_seek_hole_data helperAndreas Gruenbacher1-0/+2
Both ext4 and xfs implement seeking for the next hole or piece of data in unwritten extents by scanning the page cache, and both versions share the same bug when iterating the buffers of a page: the start offset into the page isn't taken into account, so when a page fits more than two filesystem blocks, things will go wrong. For example, on a filesystem with a block size of 1k, the following command will fail: xfs_io -f -c "falloc 0 4k" \ -c "pwrite 1k 1k" \ -c "pwrite 3k 1k" \ -c "seek -a -r 0" foo In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048, SEEK_DATA) will return the correct result. Introduce a generic vfs helper for seeking in the page cache that gets this right. The next commits will replace the filesystem specific implementations. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> [hch: dropped the export] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-04-26fs: remove _submit_bh()Eric Biggers1-2/+0
_submit_bh() allowed submitting a buffer_head for I/O using custom bio_flags. It used to be used by jbd to set BIO_SNAP_STABLE, introduced by commit 713685111774 ("mm: make snapshotting pages for stable writes a per-bio operation"). However, the code and flag has since been removed and no _submit_bh() users remain. These days, bio_flags are mostly used internally by the block layer to track the state of bio's. As such, it doesn't really make sense for filesystems to use them instead of op_flags when wanting special behavior for block requests. Therefore, remove _submit_bh() and trim the bio_flags argument from submit_bh_wbc(). Cc: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-02-08mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlersJan Kara1-3/+1
Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY from ->page_mkwrite is completely unhandled by the mm code and results in locking and writeably mapping the page which definitely is not what the caller wanted. Fix Lustre and block_page_mkwrite_ret() used by other filesystems (notably GFS2) to return VM_FAULT_NOPAGE instead which results in bailing out from the fault code, the CPU then retries the access, and we fault again effectively doing what the handler wanted. Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-04fs: Remove unmap_underlying_metadataJan Kara1-1/+0
Nobody is using this function anymore. Remove it. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-04fs: Add helper to clean bdev aliases under a bh and use itJan Kara1-0/+4
Add a helper function that clears buffer heads from a block device aliasing passed bh. Use this helper function from filesystems instead of the original unmap_underlying_metadata() to save some boiler plate code and also have a better name for the functionalily since it is not unmapping anything for a *long* time. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-11-04fs: Provide function to unmap metadata for a range of blocksJan Kara1-0/+2
Provide function equivalent to unmap_underlying_metadata() for a range of blocks. We somewhat optimize the function to use pagevec lookups instead of looking up buffer heads one by one and use page lock to pin buffer heads instead of mapping's private_lock to improve scalability. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+6
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-06-27fs: export __block_write_full_pageBenjamin Marzinski1-0/+3
gfs2 needs to be able to skip the check to see if a page is outside of the file size when writing it out. gfs2 can get into a situation where it needs to flush its in-memory log to disk while a truncate is in progress. If the file being trucated has data journaling enabled, it is possible that there are data blocks in the log that are past the end of the file. gfs can't finish the log flush without either writing these blocks out or revoking them. Otherwise, if the node crashed, it could overwrite subsequent changes made by other nodes in the cluster when it's journal was replayed. Unfortunately, there is no way to add log entries to the log during a flush. So gfs2 simply writes out the page instead. This situation can only occur when the truncate code still has the file locked exclusively, and hasn't marked this block as free in the metadata (which happens later in truc_dealloc). After gfs2 writes this page out, the truncation code will shortly invalidate it and write out any revokes if necessary. In order to make this work, gfs2 needs to be able to skip the check for writes outside the file size. Since the check exists in block_write_full_page, this patch exports __block_write_full_page, which doesn't have the check. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2016-06-07fs: have ll_rw_block users pass in op and flags separatelyMike Christie1-1/+1
This has ll_rw_block users pass in the operation and flags separately, so ll_rw_block can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07fs: have submit_bh users pass in op and flags separatelyMike Christie1-4/+5
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-2/+2
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17bufferhead: force inlining of buffer head flag operationsDenys Vlasenko1-5/+5
With both gcc 4.7.2 and 4.9.2, sometimes gcc mysteriously doesn't inline very small functions we expect to be inlined. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122 With this .config: http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os, set_buffer_foo(), clear_buffer_foo() and similar functions get deinlined about 60 times. Examples of disassembly: <set_buffer_mapped> (14 copies, 43 calls): 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 0f 20 lock orb $0x20,(%rdi) 5d pop %rbp c3 retq <buffer_mapped> (3 copies, 34 calls): 48 8b 07 mov (%rdi),%rax 55 push %rbp 48 89 e5 mov %rsp,%rbp 48 c1 e8 05 shr $0x5,%rax 83 e0 01 and $0x1,%eax 5d pop %rbp c3 retq <set_buffer_new> (5 copies, 13 calls): 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 0f 40 lock orb $0x40,(%rdi) 5d pop %rbp c3 retq This patch fixes this via s/inline/__always_inline/. This decreases vmlinux by about 3 kbytes. text data bss dec hex filename 88200439 19905208 36421632 144527279 89d4faf vmlinux2 88197239 19905240 36421632 144524111 89d434f vmlinux Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Graf <tgraf@suug.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-11vfs: remove unused wrapper block_page_mkwrite()Ross Zwisler1-2/+0
The function currently called "__block_page_mkwrite()" used to be called "block_page_mkwrite()" until a wrapper for this function was added by: commit 24da4fab5a61 ("vfs: Create __block_page_mkwrite() helper passing error values back") This wrapper, the current "block_page_mkwrite()", is currently unused. __block_page_mkwrite() is used directly by ext4, nilfs2 and xfs. Remove the unused wrapper, rename __block_page_mkwrite() back to block_page_mkwrite() and update the comment above block_page_mkwrite(). Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.com> Cc: Jan Kara <jack@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-02bufferhead: Add _gfp version for sb_getblk()Nikolay Borisov1-0/+7
sb_getblk() is used during ext4 (and possibly other FSes) writeback paths. Sometimes such path require allocating memory and guaranteeing that such allocation won't block. Currently, however, there is no way to provide user flags for sb_getblk which could lead to deadlocks. This patch implements a sb_getblk_gfp with the only difference it can accept user-provided GFP flags. Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-09-04fs/buffer.c: support buffer cache allocations with gfp modifiersGioh Kim1-5/+42
A buffer cache is allocated from movable area because it is referred for a while and released soon. But some filesystems are taking buffer cache for a long time and it can disturb page migration. New APIs are introduced to allocate buffer cache with user specific flag. *_gfp APIs are for user want to set page allocation flag for page cache allocation. And *_unmovable APIs are for the user wants to allocate page cache from non-movable area. Signed-off-by: Gioh Kim <gioh.kim@lge.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2014-06-04fs/buffer.c: remove block_write_full_page_endio()Matthew Wilcox1-2/+0
The last in-tree caller of block_write_full_page_endio() was removed in January 2013. It's time to remove the EXPORT_SYMBOL, which leaves block_write_full_page() as the only caller of block_write_full_page_endio(), so inline block_write_full_page_endio() into block_write_full_page(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dheeraj Reddy <dheeraj.reddy@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18arch: Mass conversion of smp_mb__*()Peter Zijlstra1-1/+1
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-01switch ->is_partially_uptodate() to saner argumentsAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04direct-io: Implement generic deferred AIO completionsChristoph Hellwig1-0/+2
Add support to the core direct-io code to defer AIO completions to user context using a workqueue. This replaces opencoded and less efficient code in XFS and ext4 (we save a memory allocation for each direct IO) and will be needed to properly support O_(D)SYNC for AIO. The communication between the filesystem and the direct I/O code requires a new buffer head flag, which is a bit ugly but not avoidable until the direct I/O code stops abusing the buffer_head structure for communicating with the filesystems. Currently this creates a per-superblock unbound workqueue for these completions, which is taken from an earlier patch by Jan Kara. I'm not really convinced about this use and would prefer a "normal" global workqueue with a high concurrency limit, but this needs further discussion. JK: Fixed ext4 part, dynamic allocation of the workqueue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-03mm: vmscan: take page buffers dirty and locked state into accountMel Gorman1-0/+3
Page reclaim keeps track of dirty and under writeback pages and uses it to determine if wait_iff_congested() should stall or if kswapd should begin writing back pages. This fails to account for buffer pages that can be under writeback but not PageWriteback which is the case for filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages can have all the buffers clean and writepage does no IO so it should not be accounted as congested. This patch adds an address_space operation that filesystems may optionally use to check if a page is really dirty or really under writeback. An implementation is provided for for buffer_heads is added and used for block operations and ext3 in ordered mode. By default the page flags are obeyed. Credit goes to Jan Kara for identifying that the page flags alone are not sufficient for ext3 and sanity checking a number of ideas on how the problem could be addressed. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Zlatko Calusic <zcalusic@bitsync.net> Cc: dormando <dormando@rydia.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-21mm: change invalidatepage prototype to accept lengthLukas Czerner1-1/+2
Currently there is no way to truncate partial page where the end truncate point is not at the end of the page. This is because it was not needed and the functionality was enough for file system truncate operation to work properly. However more file systems now support punch hole feature and it can benefit from mm supporting truncating page just up to the certain point. Specifically, with this functionality truncate_inode_pages_range() can be changed so it supports truncating partial page at the end of the range (currently it will BUG_ON() if 'end' is not at the end of the page). This commit changes the invalidatepage() address space operation prototype to accept range to be invalidated and update all the instances for it. We also change the block_invalidatepage() in the same way and actually make a use of the new length argument implementing range invalidation. Actual file system implementations will follow except the file systems where the changes are really simple and should not change the behaviour in any way .Implementation for truncate_page_range() which will be able to accept page unaligned ranges will follow as well. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com>
2013-05-01Merge tag 'ext4_for_linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Mostly performance and bug fixes, plus some cleanups. The one new feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which allows installation of a hidden inode designed for boot loaders." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits) ext4: fix type-widening bug in inode table readahead code ext4: add check for inodes_count overflow in new resize ioctl ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG ext4: fix online resizing for ext3-compat file systems jbd2: trace when lock_buffer in do_get_write_access takes a long time ext4: mark metadata blocks using bh flags buffer: add BH_Prio and BH_Meta flags ext4: mark all metadata I/O with REQ_META ext4: fix readdir error in case inline_data+^dir_index. ext4: fix readdir error in the case of inline_data+dir_index jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset ext4: mext_insert_extents should update extent block checksum ext4: move quota initialization out of inode allocation transaction ext4: reserve xattr index for Rich ACL support jbd2: reduce journal_head size ext4: clear buffer_uninit flag when submitting IO ext4: use io_end for multiple bios ext4: make ext4_bio_write_page() use BH_Async_Write flags ext4: Use kstrtoul() instead of parse_strtoul() ext4: defragmentation code cleanup ...
2013-04-29mm: make snapshotting pages for stable writes a per-bio operationDarrick J. Wong1-0/+1
Walking a bio's page mappings has proved problematic, so create a new bio flag to indicate that a bio's data needs to be snapshotted in order to guarantee stable pages during writeback. Next, for the one user (ext3/jbd) of snapshotting, hook all the places where writes can be initiated without PG_writeback set, and set BIO_SNAP_STABLE there. We must also flag journal "metadata" bios for stable writeout, since file data can be written through the journal. Finally, the MS_SNAP_STABLE mount flag (only used by ext3) is now superfluous, so get rid of it. [akpm@linux-foundation.org: rename _submit_bh()'s `flags' to `bio_flags', delobotomize the _submit_bh declaration] [akpm@linux-foundation.org: teeny cleanup] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-20buffer: add BH_Prio and BH_Meta flagsTheodore Ts'o1-0/+4
Add buffer_head flags so that buffer cache writebacks can be marked with the the appropriate request flags, so that metadata blocks can be marked appropriately in blktrace. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-14buffer: make touch_buffer() an exported functionTejun Heo1-1/+1
We want to add a trace point to touch_buffer() but macros and inline functions defined in header files can't have tracing points. Move touch_buffer() to fs/buffer.c and make it a proper function. The new exported function is also declared inline. As most uses of touch_buffer() are inside buffer.c with nilfs2 as the only other user, the effect of this change should be negligible. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26vfs: Block mmapped writes while the fs is frozenJan Kara1-0/+2
We should not allow file modification via mmap while the filesystem is frozen. So block in block_page_mkwrite() while the filesystem is frozen. We cannot do the blocking wait in __block_page_mkwrite() since e.g. ext4 will want to call that function with transaction started in some cases and that would deadlock. But we can at least do the non-blocking reliable check in __block_page_mkwrite() which is the hardest part anyway. We have to check for frozen filesystem with the page marked dirty and under page lock with which we then return from ->page_mkwrite(). Only that way we cannot race with writeback done by freezing code - either we mark the page dirty after the writeback has started, see freezing in progress and block, or writeback will wait for our page lock which is released only when the fault is done and then writeback will writeout and writeprotect the page again. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-26vfs: Create __block_page_mkwrite() helper passing error values backJan Kara1-0/+14
Create __block_page_mkwrite() helper which does all what block_page_mkwrite() does except that it passes back errors from __block_write_begin / block_commit_write calls. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-10block: remove per-queue pluggingJens Axboe1-1/+0
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-25fs: kill block_prepare_writeChristoph Hellwig1-1/+0
__block_write_begin and block_prepare_write are identical except for slightly different calling conventions. Convert all callers to the __block_write_begin calling conventions and drop block_prepare_write. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-09-10block: remove the BH_Eopnotsupp flagChristoph Hellwig1-2/+0
This flag was only set for barrier buffers, which we don't submit anymore. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10block: implement REQ_FLUSH/FUA based interface for FLUSH/FUA requestsTejun Heo1-1/+1
Now that the backend conversion is complete, export sequenced FLUSH/FUA capability through REQ_FLUSH/FUA flags. REQ_FLUSH means the device cache should be flushed before executing the request. REQ_FUA means that the data in the request should be on non-volatile media on completion. Block layer will choose the correct way of implementing the semantics and execute it. The request may be passed to the device directly if the device can handle it; otherwise, it will be sequenced using one or more proxy requests. Devices will never see REQ_FLUSH and/or FUA which it doesn't support. Also, unlike the original REQ_HARDBARRIER, REQ_FLUSH/FUA requests are never failed with -EOPNOTSUPP. If the underlying device doesn't support FLUSH/FUA, the block layer simply make those noop. IOW, it no longer distinguishes between writeback cache which doesn't support cache flush and writethrough/no cache. Devices which have WB cache w/o flush are very difficult to come by these days and there's nothing much we can do anyway, so it doesn't make sense to require everyone to implement -EOPNOTSUPP handling. This will simplify filesystems and block drivers as they can drop -EOPNOTSUPP retry logic for barriers. * QUEUE_ORDERED_* are removed and QUEUE_FSEQ_* are moved into blk-flush.c. * REQ_FLUSH w/o data can also be directly passed to drivers without sequencing but some drivers assume that zero length requests don't have rq->bio which isn't true for these requests requiring the use of proxy requests. * REQ_COMMON_MASK now includes REQ_FLUSH | REQ_FUA so that they are copied from bio to request. * WRITE_BARRIER is marked deprecated and WRITE_FLUSH, WRITE_FUA and WRITE_FLUSH_FUA are added. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-18remove SWRITE* I/O typesChristoph Hellwig1-0/+1
These flags aren't real I/O types, but tell ll_rw_block to always lock the buffer instead of giving up on a failed trylock. Instead add a new write_dirty_buffer helper that implements this semantic and use it from the existing SWRITE* callers. Note that the ll_rw_block code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which this patch fixes. In the ufs code clean up the helper that used to call ll_rw_block to mirror sync_dirty_buffer, which is the function it implements for compound buffers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18kill BH_Ordered flagChristoph Hellwig1-2/+1
Instead of abusing a buffer_head flag just add a variant of sync_dirty_buffer which allows passing the exact type of write flag required. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds1-15/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-09buffer_head: remove redundant test from wait_on_bufferRichard Kennedy1-6/+1
The comment suggests that when b_count equals zero it is calling __wait_no_buffer to trigger some debug, but as there is no debug in __wait_on_buffer the whole thing is redundant. AFAICT from the git log this has been the case for at least 5 years, so it seems safe just to remove this. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09get rid of file_fsync()Al Viro1-1/+0
Copy and simplify in the only two users remaining. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09get rid of block_write_begin_newtruncChristoph Hellwig1-6/+2
Move the call to vmtruncate to get rid of accessive blocks to the callers in preparation of the new truncate sequence and rename the non-truncating version to block_write_begin. While we're at it also remove several unused arguments to block_write_begin. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09introduce __block_write_beginChristoph Hellwig1-0/+2
Split up the block_write_begin implementation - __block_write_begin is a new trivial wrapper for block_prepare_write that always takes an already allocated page and can be either called from block_write_begin or filesystem code that already has a page allocated. Remove the handling of already allocated pages from block_write_begin after switching all callers that do it to __block_write_begin. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09get rid of cont_write_begin_newtruncChristoph Hellwig1-3/+0
Move the call to vmtruncate to get rid of accessive blocks to the callers in preparation of the new truncate sequence and rename the non-truncating version to cont_write_begin. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09get rid of nobh_write_begin_newtruncChristoph Hellwig1-5/+1
Move the call to vmtruncate to get rid of accessive blocks to the only remaining caller and rename the non-truncating version to nobh_write_begin. Get rid of the superflous file argument to it while we're at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27fs: introduce new truncate sequencenpiggin@suse.de1-0/+9
Introduce a new truncate calling sequence into fs/mm subsystems. Rather than setattr > vmtruncate > truncate, have filesystems call their truncate sequence from ->setattr if filesystem specific operations are required. vmtruncate is deprecated, and truncate_pagecache and inode_newsize_ok helpers introduced previously should be used. simple_setattr is introduced for simple in-ram filesystems to implement the new truncate sequence. Eventually all filesystems should be converted to implement a setattr, and the default code in notify_change should go away. simple_setsize is also introduced to perform just the ATTR_SIZE portion of simple_setattr (ie. changing i_size and trimming pagecache). To implement the new truncate sequence: - filesystem specific manipulations (eg freeing blocks) must be done in the setattr method rather than ->truncate. - vmtruncate can not be used by core code to trim blocks past i_size in the event of write failure after allocation, so this must be performed in the fs code. - convert usage of helpers block_write_begin, nobh_write_begin, cont_write_begin, and *blockdev_direct_IO* to use _newtrunc postfixed variants. These avoid calling vmtruncate to trim blocks (see previous). - inode_setattr should not be used. generic_setattr is a new function to be used to copy simple attributes into the generic inode. - make use of the better opportunity to handle errors with the new sequence. Big problem with the previous calling sequence: the filesystem is not called until i_size has already changed. This means it is not allowed to fail the call, and also it does not know what the previous i_size was. Also, generic code calling vmtruncate to truncate allocated blocks in case of error had no good way to return a meaningful error (or, for example, atomically handle block deallocation). Cc: Christoph Hellwig <hch@lst.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27drop unused dentry argument to ->fsyncChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-16Add block_write_full_page_endio for passing endio handlerChris Mason1-0/+3
block_write_full_page doesn't allow the caller to control what happens when the IO is over. This adds a new call named block_write_full_page_endio so the buffer head end_io handler can be provided by the caller. This will be used by the ext3 data=guarded mode to do i_size updates in a workqueue based end_io handler. end_buffer_async_write is also exported so it can be called to do the dirty work of managing page writeback for the higher level end_io handler. Signed-off-by: Chris Mason <chris.mason@oracle.com> Acked-by: Theodore Tso <tytso@mit.edu> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02Merge branch 'for-linus' of ↵Linus Torvalds1-12/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Remove two unneeded exports and make two symbols static in fs/mpage.c Cleanup after commit 585d3bc06f4ca57f975a5a1f698f65a45ea66225 Trim includes of fdtable.h Don't crap into descriptor table in binfmt_som Trim includes in binfmt_elf Don't mess with descriptor table in load_elf_binary() Get rid of indirect include of fs_struct.h New helper - current_umask() check_unsafe_exec() doesn't care about signal handlers sharing New locking/refcounting for fs_struct Take fs_struct handling to new file (fs/fs_struct.c) Get rid of bumping fs_struct refcount in pivot_root(2) Kill unsharing fs_struct in __set_personality()
2009-04-01mm: page_mkwrite change prototype to match faultNick Piggin1-1/+1
Change the page_mkwrite prototype to take a struct vm_fault, and return VM_FAULT_xxx flags. There should be no functional change. This makes it possible to return much more detailed error information to the VM (and also can provide more information eg. virtual_address to the driver, which might be important in some special cases). This is required for a subsequent fix. And will also make it easier to merge page_mkwrite() with fault() in future. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Cc: Felix Blyakher <felixb@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01Cleanup after commit 585d3bc06f4ca57f975a5a1f698f65a45ea66225Al Viro1-12/+0
fsync_bdev() export and a bunch of stubs for !CONFIG_BLOCK case had been left behind Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27fs: move bdev code out of buffer.cNick Piggin1-7/+0
Move some block device related code out from buffer.c and put it in block_dev.c. I'm trying to move non-buffer_head code out of buffer.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>