summaryrefslogtreecommitdiff
path: root/src/aticlock.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/aticlock.c')
-rw-r--r--src/aticlock.c1608
1 files changed, 0 insertions, 1608 deletions
diff --git a/src/aticlock.c b/src/aticlock.c
deleted file mode 100644
index e1201cb..0000000
--- a/src/aticlock.c
+++ /dev/null
@@ -1,1608 +0,0 @@
-/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/aticlock.c,v 1.21 2003/04/23 21:51:27 tsi Exp $ */
-/*
- * Copyright 1997 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that copyright
- * notice and this permission notice appear in supporting documentation, and
- * that the name of Marc Aurele La France not be used in advertising or
- * publicity pertaining to distribution of the software without specific,
- * written prior permission. Marc Aurele La France makes no representations
- * about the suitability of this software for any purpose. It is provided
- * "as-is" without express or implied warranty.
- *
- * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
- * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/*
- * Adapters prior to V5 use 4 crystals. Adapters V5 and later use a clock
- * generator chip. V3 and V4 adapters differ when it comes to choosing clock
- * frequencies.
- *
- * VGA Wonder V3/V4 Adapter Clock Frequencies
- * R E G I S T E R S
- * 1CE(*) 3C2 3C2 Frequency
- * B2h/BEh
- * Bit 6/4 Bit 3 Bit 2 (MHz)
- * ------- ------- ------- -------
- * 0 0 0 50.000
- * 0 0 1 56.644
- * 0 1 0 Spare 1
- * 0 1 1 44.900
- * 1 0 0 44.900
- * 1 0 1 50.000
- * 1 1 0 Spare 2
- * 1 1 1 36.000
- *
- * (*): V3 uses index B2h, bit 6; V4 uses index BEh, bit 4
- *
- * V5, PLUS, XL and XL24 usually have an ATI 18810 clock generator chip, but
- * some have an ATI 18811-0, and it's quite conceivable that some exist with
- * ATI 18811-1's or ATI 18811-2's. Mach32 adapters are known to use any one of
- * these clock generators. Mach32 adapters also use a different dot clock
- * ordering. ATI says there is no reliable way for the driver to determine
- * which clock generator is on the adapter, but this driver will do its best to
- * do so anyway.
- *
- * VGA Wonder V5/PLUS/XL/XL24 Clock Frequencies
- * R E G I S T E R S
- * 1CE 1CE 3C2 3C2 Frequency
- * B9h BEh (MHz) 18811-0 18811-1
- * Bit 1 Bit 4 Bit 3 Bit 2 18810 18812-0 18811-2 (*5)
- * ------- ------- ------- ------- ------- ------- ------- -------
- * 0 0 0 0 30.240 30.240 135.000 75.000
- * 0 0 0 1 32.000 32.000 32.000 77.500
- * 0 0 1 0 37.500 110.000 110.000 80.000
- * 0 0 1 1 39.000 80.000 80.000 90.000
- * 0 1 0 0 42.954 42.954 100.000 25.175
- * 0 1 0 1 48.771 48.771 126.000 28.322
- * 0 1 1 0 (*1) 92.400 92.400 31.500
- * 0 1 1 1 36.000 36.000 36.000 36.000
- * 1 0 0 0 40.000 39.910 39.910 100.000
- * 1 0 0 1 (*4) 44.900 44.900 110.000
- * 1 0 1 0 75.000 75.000 75.000 126.000
- * 1 0 1 1 65.000 65.000 65.000 135.000
- * 1 1 0 0 50.350 50.350 50.350 40.000
- * 1 1 0 1 56.640 56.640 56.640 44.900
- * 1 1 1 0 (*2) (*3) (*3) 50.000
- * 1 1 1 1 44.900 44.900 44.900 65.000
- *
- * (*1) External 0 (supposedly 16.657 Mhz)
- * (*2) External 1 (supposedly 28.322 MHz)
- * (*3) This setting doesn't seem to generate anything
- * (*4) This setting is documented to be 56.644 MHz, but something close to 82
- * MHz has also been encountered.
- * (*5) This setting is for Dell OmniPlex 590 systems, with a 68800AX on the
- * motherboard, along with an AT&T21C498 DAC (which is reported as an
- * STG1700) and ICS2494AM clock generator (a.k.a. ATI 18811-?).
- *
- * Mach32 Clock Frequencies
- * R E G I S T E R S
- * 1CE 1CE 3C2 3C2 Frequency
- * B9h BEh (MHz) 18811-0 18811-1
- * Bit 1 Bit 4 Bit 3 Bit 2 18810 18812-0 18811-2 (*5)
- * ------- ------- ------- ------- ------- ------- ------- -------
- * 0 0 0 0 42.954 42.954 100.000 25.175
- * 0 0 0 1 48.771 48.771 126.000 28.322
- * 0 0 1 0 (*1) 92.400 92.400 31.500
- * 0 0 1 1 36.000 36.000 36.000 36.000
- * 0 1 0 0 30.240 30.240 135.000 75.000
- * 0 1 0 1 32.000 32.000 32.000 77.500
- * 0 1 1 0 37.500 110.000 110.000 80.000
- * 0 1 1 1 39.000 80.000 80.000 90.000
- * 1 0 0 0 50.350 50.350 50.350 40.000
- * 1 0 0 1 56.640 56.640 56.640 44.900
- * 1 0 1 0 (*2) (*3) (*3) 50.000
- * 1 0 1 1 44.900 44.900 44.900 65.000
- * 1 1 0 0 40.000 39.910 39.910 100.000
- * 1 1 0 1 (*4) 44.900 44.900 110.000
- * 1 1 1 0 75.000 75.000 75.000 126.000
- * 1 1 1 1 65.000 65.000 65.000 135.000
- *
- * (*1) External 0 (supposedly 16.657 Mhz)
- * (*2) External 1 (supposedly 28.322 MHz)
- * (*3) This setting doesn't seem to generate anything
- * (*4) This setting is documented to be 56.644 MHz, but something close to 82
- * MHz has also been encountered.
- * (*5) This setting is for Dell OmniPlex 590 systems, with a 68800AX on the
- * motherboard, along with an AT&T21C498 DAC (which is reported as an
- * STG1700) and ICS2494AM clock generator (a.k.a. ATI 18811-?).
- *
- * Note that, to reduce confusion, this driver masks out the different clock
- * ordering.
- *
- * For all adapters, these frequencies can be divided by 1 or 2. For all
- * adapters, except Mach32's and Mach64's, frequencies can also be divided by 3
- * or 4.
- *
- * Register 1CE, index B8h
- * Bit 7 Bit 6
- * ------- -------
- * 0 0 Divide by 1
- * 0 1 Divide by 2
- * 1 0 Divide by 3
- * 1 1 Divide by 4
- *
- * With respect to clocks, Mach64's are entirely different animals.
- *
- * The oldest Mach64's use one of the non-programmable clock generators
- * described above. In this case, the driver will handle clocks in much the
- * same way as it would for a Mach32.
- *
- * All other Mach64 adapters use a programmable clock generator. BIOS
- * initialisation programmes an initial set of frequencies. Two of these are
- * reserved to allow for the setting of modes that do not use a frequency from
- * this initial set. One of these reserved slots is used by the BIOS mode set
- * routine, the other by the particular accelerated driver used (MS-Windows,
- * AutoCAD, etc.). The slots reserved in this way are dependent on the
- * particular clock generator used by the adapter.
- *
- * If the driver does not support the adapter's clock generator, it will try to
- * match the (probed or specified) clocks to one of the following sets.
- *
- * Mach64 Clock Frequencies for unsupported programmable clock generators
- * R E G I S T E R S
- * 1CE 1CE 3C2 3C2 Frequency
- * B9h BEh (MHz)
- * Bit 1 Bit 4 Bit 3 Bit 2 Set 1 Set 2 Set 3
- * ------- ------- ------- ------- ------- ------- -------
- * 0 0 0 0 50.350 25.180 25.180
- * 0 0 0 1 56.640 28.320 28.320
- * 0 0 1 0 63.000 31.500 0.000
- * 0 0 1 1 72.000 36.000 0.000
- * 0 1 0 0 0.000 0.000 0.000
- * 0 1 0 1 110.000 110.000 0.000
- * 0 1 1 0 126.000 126.000 0.000
- * 0 1 1 1 135.000 135.000 0.000
- * 1 0 0 0 40.000 40.000 0.000
- * 1 0 0 1 44.900 44.900 0.000
- * 1 0 1 0 49.500 49.500 0.000
- * 1 0 1 1 50.000 50.000 0.000
- * 1 1 0 0 0.000 0.000 0.000
- * 1 1 0 1 80.000 80.000 0.000
- * 1 1 1 0 75.000 75.000 0.000
- * 1 1 1 1 65.000 65.000 0.000
- *
- * The driver will never select a setting of 0.000 MHz. The above comments on
- * clock ordering and clock divider apply here also.
- *
- * For all supported programmable clock generators, the driver will ignore any
- * XF86Config clock line and programme, as needed, the clock number reserved by
- * the BIOS for accelerated drivers. The driver's mode initialisation routine
- * finds integers N, M and D such that
- *
- * N
- * R * ------- MHz
- * M * D
- *
- * best approximates the mode's clock frequency, where R is the crystal-
- * generated reference frequency (usually 14.318 MHz). D is a power of 2
- * except for those integrated controllers that also offer odd dividers.
- * Different clock generators have different restrictions on the value N, M and
- * D can assume. The driver contains an internal table to record these
- * restrictions (among other things). The resulting values of N, M and D are
- * then encoded in a generator-specific way and used to programme the clock.
- * The Mach64's clock divider is not used in this case.
- */
-
-#include "ati.h"
-#include "atiadapter.h"
-#include "atichip.h"
-#include "atidac.h"
-#include "atidsp.h"
-#include "atimach64io.h"
-#include "atimode.h"
-#include "atiwonderio.h"
-
-/*
- * Definitions related to non-programmable clock generators.
- */
-const char *ATIClockNames[] =
-{
- "unknown",
- "IBM VGA compatible",
- "crystals",
- "ATI 18810 or similar",
- "ATI 18811-0 or similar",
- "ATI 18811-1 or similar",
- "ICS 2494-AM or similar",
- "Programmable (BIOS setting 1)",
- "Programmable (BIOS setting 2)",
- "Programmable (BIOS setting 3)"
-};
-
-/*
- * Definitions related to programmable clock generators.
- */
-static CARD16 ATIPostDividers[] = {1, 2, 4, 8, 16, 32, 64, 128},
- ATI264xTPostDividers[] = {1, 2, 4, 8, 3, 0, 6, 12};
-ClockRec ATIClockDescriptors[] =
-{
- {
- 0, 0, 0, 1, 1,
- 1, 1, 0,
- 0, NULL,
- "Non-programmable"
- },
- {
- 257, 512, 257, 1, 1,
- 46, 46, 0,
- 4, ATIPostDividers,
- "ATI 18818 or ICS 2595 or similar"
- },
- {
- 2, 129, 2, 1, 1,
- 8, 14, 2,
- 8, ATIPostDividers,
- "SGS-Thompson 1703 or similar"
- },
- {
- 16, 263, 8, 8, 9,
- 4, 12, 2,
- 4, ATIPostDividers,
- "Chrontel 8398 or similar"
- },
- {
- 2, 255, 0, 1, 1,
- 45, 45, 0,
- 4, ATI264xTPostDividers,
- "Internal"
- },
- {
- 2, 257, 2, 1, 1,
- 2, 32, 2,
- 4, ATIPostDividers,
- "AT&T 20C408 or similar"
- },
- {
- 65, 128, 65, 1, 1,
- 2, 14, 0,
- 4, ATIPostDividers,
- "IBM RGB 514 or similar"
- }
-};
-
-/*
- * XF86Config clocks line that start with the following will either be rejected
- * for ATI adapters, or accepted for non-ATI adapters.
- */
-static const int
-ATIVGAClocks[] =
-{
- 25175, 28322,
- -1
-};
-
-/*
- * The driver will attempt to match fixed clocks to one of the following
- * specifications.
- */
-static const int
-ATICrystalFrequencies[] =
-{
- 50000, 56644, 0, 44900, 44900, 50000, 0, 36000,
- -1
-},
-ATI18810Frequencies[] =
-{
- 30240, 32000, 37500, 39000, 42954, 48771, 0, 36000,
- 40000, 0, 75000, 65000, 50350, 56640, 0, 44900
-},
-ATI188110Frequencies[] =
-{
- 30240, 32000, 110000, 80000, 42954, 48771, 92400, 36000,
- 39910, 44900, 75000, 65000, 50350, 56640, 0, 44900
-},
-ATI188111Frequencies[] =
-{
- 135000, 32000, 110000, 80000, 100000, 126000, 92400, 36000,
- 39910, 44900, 75000, 65000, 50350, 56640, 0, 44900
-},
-ATI2494AMFrequencies[] =
-{
- 75000, 77500, 80000, 90000, 25175, 28322, 31500, 36000,
- 100000, 110000, 126000, 135000, 40000, 44900, 50000, 65000
-},
-ATIMach64AFrequencies[] =
-{
- 0, 110000, 126000, 135000, 50350, 56640, 63000, 72000,
- 0, 80000, 75000, 65000, 40000, 44900, 49500, 50000
-},
-ATIMach64BFrequencies[] =
-{
- 0, 110000, 126000, 135000, 25180, 28320, 31500, 36000,
- 0, 80000, 75000, 65000, 40000, 44900, 49500, 50000
-},
-ATIMach64CFrequencies[] =
-{
- 0, 0, 0, 0, 25180, 28320, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0
-},
-*SpecificationClockLine[] =
-{
- NULL,
- ATIVGAClocks,
- ATICrystalFrequencies,
- ATI18810Frequencies,
- ATI188110Frequencies,
- ATI188111Frequencies,
- ATI2494AMFrequencies,
- ATIMach64AFrequencies,
- ATIMach64BFrequencies,
- ATIMach64CFrequencies,
- NULL
-};
-
-/*
- * The driver will reject XF86Config clocks lines that start with, or are an
- * initial subset of, one of the following.
- */
-static const int
-ATIPre_2_1_1_Clocks_A[] = /* Based on 18810 */
-{
- 18000, 22450, 25175, 28320, 36000, 44900, 50350, 56640,
- 30240, 32000, 37500, 39000, 40000, 0, 75000, 65000,
- -1
-},
-ATIPre_2_1_1_Clocks_B[] = /* Based on 18811-0 */
-{
- 18000, 22450, 25175, 28320, 36000, 44900, 50350, 56640,
- 30240, 32000, 110000, 80000, 39910, 44900, 75000, 65000,
- -1
-},
-ATIPre_2_1_1_Clocks_C[] = /* Based on 18811-1 (or -2) */
-{
- 18000, 22450, 25175, 28320, 36000, 44900, 50350, 56640,
- 135000, 32000, 110000, 80000, 39910, 44900, 75000, 65000,
- -1
-},
-ATIPre_2_1_1_Clocks_D[] = /* Based on ICS 2494AM */
-{
- 18000, 32500, 20000, 22450, 36000, 65000, 40000, 44900,
- 75000, 77500, 80000, 90000, 100000, 110000, 126000, 135000,
- -1
-},
-ATIPre_2_1_1_Clocks_E[] = /* Based on programmable setting 1 */
-{
- 36000, 25000, 20000, 22450, 72000, 50000, 40000, 44900,
- 0, 110000, 126000, 135000, 0, 80000, 75000, 65000,
- -1
-},
-ATIPre_2_1_1_Clocks_F[] = /* Based on programmable setting 2 */
-{
- 18000, 25000, 20000, 22450, 36000, 50000, 40000, 44900,
- 0, 110000, 126000, 135000, 0, 80000, 75000, 65000,
- -1
-},
-*InvalidClockLine[] =
-{
- NULL,
- ATIVGAClocks,
- ATIPre_2_1_1_Clocks_A,
- ATIPre_2_1_1_Clocks_B,
- ATIPre_2_1_1_Clocks_C,
- ATIPre_2_1_1_Clocks_D,
- ATIPre_2_1_1_Clocks_E,
- ATIPre_2_1_1_Clocks_F,
- NULL
-};
-
-/*
- * Clock maps.
- */
-static const CARD8 ClockMaps[][4] =
-{
- /* Null map */
- { 0, 1, 2, 3},
- /* VGA Wonder map <-> Mach{8,32,64} */
- { 1, 0, 3, 2},
- /* VGA Wonder map <-> Accelerator */
- { 0, 2, 1, 3},
- /* VGA -> Accelerator map */
- { 2, 0, 3, 1},
- /* Accelerator -> VGA map */
- { 1, 3, 0, 2}
-};
-#define ATIVGAWonderClockMap ClockMaps[0]
-#define ATIVGAWonderClockUnmap ATIVGAWonderClockMap
-#define ATIMachVGAClockMap ClockMaps[1]
-#define ATIMachVGAClockUnmap ATIMachVGAClockMap
-#define ATIVGAProgrammableClockMap ClockMaps[2]
-#define ATIVGAProgrammableClockUnmap ATIVGAProgrammableClockMap
-#define ATIAcceleratorClockMap ClockMaps[3]
-#define ATIAcceleratorClockUnmap ClockMaps[4]
-#define ATIProgrammableClockMap ClockMaps[0]
-#define ATIProgrammableClockUnmap ATIProgrammableClockMap
-#define MapClockIndex(_ClockMap, _Index) \
- (SetBits((_ClockMap)[GetBits(_Index, 0x0CU)], 0x0CU) | \
- ((_Index) & ~0x0CU))
-
-/*
- * ATIMatchClockLine --
- *
- * This function tries to match the XF86Config clocks to one of an array of
- * clock lines. It returns a clock line number or 0.
- */
-static int
-ATIMatchClockLine
-(
- ScrnInfoPtr pScreenInfo,
- ATIPtr pATI,
- const int **ClockLine,
- const unsigned short int NumberOfClocks,
- const int CalibrationClockNumber,
- const int ClockMap
-)
-{
- int ClockChip = 0, ClockChipIndex = 0;
- int NumberOfMatchingClocks = 0;
- int MinimumGap = CLOCK_TOLERANCE + 1;
-
- /* For ATI adapters, reject generic VGA clocks */
-
-#ifndef AVOID_CPIO
-
- if (pATI->Adapter != ATI_ADAPTER_VGA)
-
-#endif /* AVOID_CPIO */
-
- {
- if (ClockLine == SpecificationClockLine)
- ClockChipIndex++;
- }
-
- /* If checking for XF86Config clock order, skip crystals */
- if (ClockMap)
- ClockChipIndex++;
-
- for (; ClockLine[++ClockChipIndex]; )
- {
- int MaximumGap = 0, ClockCount = 0, ClockIndex = 0;
-
-#ifndef AVOID_CPIO
-
- /* Only Mach64's and later can have programmable clocks */
- if ((ClockChipIndex >= ATI_CLOCK_MACH64A) &&
- (pATI->Adapter < ATI_ADAPTER_MACH64))
- break;
-
-#endif /* AVOID_CPIO */
-
- for (; ClockIndex < NumberOfClocks; ClockIndex++)
- {
- int Gap, XF86ConfigClock, SpecificationClock;
-
- SpecificationClock = ClockLine[ClockChipIndex]
- [MapClockIndex(ClockMaps[ClockMap], ClockIndex)];
- if (SpecificationClock < 0)
- break;
- if (!SpecificationClock)
- continue;
-
- XF86ConfigClock = pScreenInfo->clock[ClockIndex];
- if (!XF86ConfigClock)
- continue;
-
- Gap = abs(XF86ConfigClock - SpecificationClock);
- if (Gap >= MinimumGap)
- goto SkipThisClockGenerator;
- if (!Gap)
- {
- if (ClockIndex == CalibrationClockNumber)
- continue;
- }
- else if (Gap > MaximumGap)
- {
- MaximumGap = Gap;
- }
- ClockCount++;
- }
-
- if (ClockCount <= NumberOfMatchingClocks)
- continue;
- NumberOfMatchingClocks = ClockCount;
- ClockChip = ClockChipIndex;
- if (!(MinimumGap = MaximumGap))
- break;
-
-SkipThisClockGenerator:;
-
-#ifndef AVOID_CPIO
-
- /* For non-ATI adapters, only normalise standard VGA clocks */
- if (pATI->Adapter == ATI_ADAPTER_VGA)
- break;
-
-#endif /* AVOID_CPIO */
-
- }
-
- return ClockChip;
-}
-
-/*
- * ATIClockPreInit --
- *
- * This function is called by ATIPreInit() and handles the XF86Config clocks
- * line (or lack thereof).
- */
-void
-ATIClockPreInit
-(
- ScrnInfoPtr pScreenInfo,
- ATIPtr pATI,
- GDevPtr pGDev,
- ClockRangePtr pRange
-)
-{
- double ScaleFactor;
- unsigned short int NumberOfUndividedClocks;
- unsigned short int NumberOfDividers, NumberOfClocks;
- int CalibrationClockNumber, CalibrationClockValue;
- int ClockIndex, SpecificationClock, ClockMap = 0, Index;
- CARD8 CanDisableInterrupts;
-
-#ifndef AVOID_CPIO
-
- CARD8 genmo;
-
-#endif /* AVOID_CPIO */
-
- /*
- * Decide what to do about the XF86Config clocks for programmable clock
- * generators.
- */
- if (pATI->ProgrammableClock != ATI_CLOCK_FIXED)
- {
- /* Check for those that are not (yet) handled */
- if ((pATI->ProgrammableClock == ATI_CLOCK_UNKNOWN) ||
- (pATI->ProgrammableClock > NumberOf(ATIClockDescriptors)))
- {
- xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0,
- "Unknown programmable clock generator type (0x%02X)"
- " detected.\n", pATI->ProgrammableClock);
- }
- else if (pATI->ClockDescriptor.MaxN <= 0)
- {
- xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0,
- "Unsupported programmable clock generator detected: %s.\n",
- pATI->ClockDescriptor.ClockName);
- }
- else
- {
- /*
- * Recognise supported clock generators. This involves telling the
- * rest of the server about it and (re-)initializing the XF86Config
- * clocks line.
- */
- pRange->clockIndex = -1;
- pScreenInfo->progClock = TRUE;
-
- /* Set internal clock ordering */
-
-#ifndef AVOID_CPIO
-
- if (pATI->NewHW.crtc == ATI_CRTC_VGA)
- {
- pATI->NewHW.ClockMap = ATIVGAProgrammableClockMap;
- pATI->NewHW.ClockUnmap = ATIVGAProgrammableClockUnmap;
- }
- else
-
-#endif /* AVOID_CPIO */
-
- {
- pATI->NewHW.ClockMap = ATIProgrammableClockMap;
- pATI->NewHW.ClockUnmap = ATIProgrammableClockUnmap;
- }
-
- xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
- "%s programmable clock generator detected.\n",
- pATI->ClockDescriptor.ClockName);
- if (pATI->ReferenceDenominator == 1)
- xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
- "Reference clock %.3f MHz.\n",
- (double)pATI->ReferenceNumerator / 1000.0);
- else
- xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
- "Reference clock %.6g/%d (%.3f) MHz.\n",
- (double)pATI->ReferenceNumerator / 1000.0,
- pATI->ReferenceDenominator,
- (double)pATI->ReferenceNumerator /
- ((double)pATI->ReferenceDenominator * 1000.0));
-
- /* Clobber XF86Config clocks line */
- if (pGDev->numclocks)
- xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE,
- "XF86Config clocks specification ignored.\n");
-
- if (pATI->ProgrammableClock == ATI_CLOCK_CH8398)
- { /* First two are fixed */
- pScreenInfo->numClocks = 2;
- pScreenInfo->clock[0] = 25175;
- pScreenInfo->clock[1] = 28322;
- }
- else if (pATI->ProgrammableClock == ATI_CLOCK_INTERNAL)
- {
- /*
- * The integrated PLL generates clocks as if the reference
- * frequency were doubled.
- */
- pATI->ReferenceNumerator <<= 1;
- }
-
- return; /* ... to ATIPreInit() */
- }
- }
-
-#ifndef AVOID_CPIO
-
- /* Set default clock maps */
- pATI->NewHW.ClockMap = ATIVGAWonderClockMap;
- pATI->NewHW.ClockUnmap = ATIVGAWonderClockUnmap;
-
-#endif /* AVOID_CPIO */
-
- /*
- * Determine the number of clock values the adapter should be able to
- * generate and the dot clock to use for probe calibration.
- */
-ProbeClocks:
-
-#ifndef AVOID_CPIO
-
- if (pATI->Adapter == ATI_ADAPTER_VGA)
- {
- NumberOfDividers = 1;
- NumberOfUndividedClocks = 4;
- CalibrationClockNumber = 1;
- CalibrationClockValue = 28322;
- }
- else
-
-#endif /* AVOID_CPIO */
-
- {
-
-#ifndef AVOID_CPIO
-
- NumberOfDividers = 4;
- if ((pATI->Chip <= ATI_CHIP_18800) ||
- (pATI->Adapter == ATI_ADAPTER_V4))
- {
- NumberOfUndividedClocks = 8;
- /* Actually, any undivided clock will do */
- CalibrationClockNumber = 1;
- CalibrationClockValue = 56644;
- }
- else
-
-#endif /* AVOID_CPIO */
-
- {
- NumberOfUndividedClocks = 16;
-
-#ifndef AVOID_CPIO
-
- CalibrationClockNumber = 7;
- CalibrationClockValue = 36000;
- if (pATI->Chip >= ATI_CHIP_68800)
-
-#endif /* AVOID_CPIO */
-
- {
- NumberOfDividers = 2;
- if (pATI->Chip >= ATI_CHIP_264CT)
- {
- NumberOfDividers = 1;
- NumberOfUndividedClocks = 4;
- CalibrationClockNumber = 1;
- CalibrationClockValue = 28322;
- }
- else
-
-#ifndef AVOID_CPIO
-
- if (pATI->Adapter >= ATI_ADAPTER_MACH64)
-
-#endif /* AVOID_CPIO */
-
- {
- CalibrationClockNumber = 10 /* or 11 */;
- CalibrationClockValue = 75000 /* or 65000 */;
- }
-
- /*
- * When selecting clocks, all ATI accelerators use a different
- * clock ordering.
- */
-
-#ifndef AVOID_CPIO
-
- if (pATI->NewHW.crtc == ATI_CRTC_VGA)
- {
- pATI->NewHW.ClockMap = ATIMachVGAClockMap;
- pATI->NewHW.ClockUnmap = ATIMachVGAClockUnmap;
- }
- else
-
-#endif /* AVOID_CPIO */
-
- {
- pATI->NewHW.ClockMap = ATIAcceleratorClockMap;
- pATI->NewHW.ClockUnmap = ATIAcceleratorClockUnmap;
- }
- }
- }
- }
-
- pATI->OldHW.ClockMap = pATI->NewHW.ClockMap;
- pATI->OldHW.ClockUnmap = pATI->NewHW.ClockUnmap;
-
- NumberOfClocks = NumberOfUndividedClocks * NumberOfDividers;
-
- /*
- * Respect any XF86Config clocks line. Well, that's the theory, anyway.
- * In practice, however, the regular use of probed values is widespread, at
- * times causing otherwise inexplicable results. So, attempt to normalise
- * the clocks to known (i.e. specification) values.
- */
- if (!pGDev->numclocks || pATI->OptionProbeClocks ||
- xf86ServerIsOnlyProbing())
- {
- if (pATI->ProgrammableClock != ATI_CLOCK_FIXED)
- {
- /*
- * For unsupported programmable clock generators, pick the highest
- * frequency set by BIOS initialisation for clock calibration.
- */
- CalibrationClockNumber = CalibrationClockValue = 0;
- for (ClockIndex = 0;
- ClockIndex < NumberOfUndividedClocks;
- ClockIndex++)
- {
- if (CalibrationClockValue < pATI->BIOSClocks[ClockIndex])
- {
- CalibrationClockNumber = ClockIndex;
- CalibrationClockValue = pATI->BIOSClocks[ClockIndex];
- }
- }
- CalibrationClockNumber =
- MapClockIndex(pATI->NewHW.ClockUnmap, CalibrationClockNumber);
- CalibrationClockValue *= 10;
- }
-
-#ifndef AVOID_CPIO
-
- if (pATI->VGAAdapter != ATI_ADAPTER_NONE)
- {
- /*
- * The current video state needs to be saved before the clock
- * probe, and restored after. Video memory corruption and other
- * effects occur because, at this early stage, the clock probe
- * cannot reliably be prevented from enabling frequencies that are
- * greater than what the adapter can handle.
- */
- ATIModeSave(pScreenInfo, pATI, &pATI->OldHW);
-
- /* Ensure clock select pins are not OR'ed with anything */
- if (pATI->CPIO_VGAWonder && (pATI->OldHW.crtc == ATI_CRTC_VGA))
- ATIModifyExtReg(pATI, 0xB5U, pATI->OldHW.b5, 0x7FU, 0x00U);
- }
-
-#endif /* AVOID_CPIO */
-
- /*
- * Probe the adapter for clock values. The following is essentially
- * the common layer's xf86GetClocks() reworked to fit. One difference
- * is the ability to monitor a VSync bit in MMIO space.
- */
- CanDisableInterrupts = TRUE; /* An assumption verified below */
-
- for (ClockIndex = 0; ClockIndex < NumberOfClocks; ClockIndex++)
- {
- pScreenInfo->clock[ClockIndex] = 0;
-
- /* Remap clock number */
- Index = MapClockIndex(pATI->OldHW.ClockMap, ClockIndex);
-
- /* Select the clock */
- switch (pATI->OldHW.crtc)
- {
-
-#ifndef AVOID_CPIO
-
- case ATI_CRTC_VGA:
- /* Get generic two low-order bits */
- genmo = (inb(R_GENMO) & 0xF3U) | ((Index << 2) & 0x0CU);
-
- if (pATI->CPIO_VGAWonder)
- {
- /*
- * On adapters with crystals, switching to one of the
- * spare assignments doesn't do anything (i.e. the
- * previous setting remains in effect). So, disable
- * their selection.
- */
- if (((Index & 0x03U) == 0x02U) &&
- ((pATI->Chip <= ATI_CHIP_18800) ||
- (pATI->Adapter == ATI_ADAPTER_V4)))
- continue;
-
- /* Start sequencer reset */
- PutReg(SEQX, 0x00U, 0x00U);
-
- /* Set high-order bits */
- if (pATI->Chip <= ATI_CHIP_18800)
- {
- ATIModifyExtReg(pATI, 0xB2U, -1, 0xBFU,
- Index << 4);
- }
- else
- {
- ATIModifyExtReg(pATI, 0xBEU, -1, 0xEFU,
- Index << 2);
- if (pATI->Adapter != ATI_ADAPTER_V4)
- {
- Index >>= 1;
- ATIModifyExtReg(pATI, 0xB9U, -1, 0xFDU,
- Index >> 1);
- }
- }
-
- /* Set clock divider bits */
- ATIModifyExtReg(pATI, 0xB8U, -1, 0x00U,
- (Index << 3) & 0xC0U);
- }
- else
- {
- /*
- * Reject clocks that cannot be selected.
- */
- if (Index & ~0x03U)
- continue;
-
- /* Start sequencer reset */
- PutReg(SEQX, 0x00U, 0x00U);
- }
-
- /* Must set miscellaneous output register last */
- outb(GENMO, genmo);
-
- /* End sequencer reset */
- PutReg(SEQX, 0x00U, 0x03U);
-
- break;
-
-#endif /* AVOID_CPIO */
-
- case ATI_CRTC_MACH64:
- out8(CLOCK_CNTL, CLOCK_STROBE |
- SetBits(Index, CLOCK_SELECT | CLOCK_DIVIDER));
- break;
-
- default:
- continue;
- }
-
- usleep(50000); /* Let clock stabilise */
-
- xf86SetPriority(TRUE);
-
- /* Try to disable interrupts */
- if (CanDisableInterrupts && !xf86DisableInterrupts())
- {
- xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING,
- "Unable to disable interrupts; Clock probe will not be as"
- " accurate.\n");
- CanDisableInterrupts = FALSE;
- }
-
- /*
- * Generate a count while monitoring the vertical sync or blanking
- * pulse. This is dependent on the CRTC used by the mode on server
- * entry.
- */
- switch (pATI->OldHW.crtc)
- {
-
-#ifndef AVOID_CPIO
-
- case ATI_CRTC_VGA:
- /* Verify vertical sync pulses are in fact occurring */
- Index = 1 << 19;
- while (!(inb(GENS1(pATI->CPIO_VGABase)) & 0x08U))
- if (Index-- <= 0)
- goto EnableInterrupts;
- Index = 1 << 19;
- while (inb(GENS1(pATI->CPIO_VGABase)) & 0x08U)
- if (Index-- <= 0)
- goto EnableInterrupts;
- Index = 1 << 19;
- while (!(inb(GENS1(pATI->CPIO_VGABase)) & 0x08U))
- if (Index-- <= 0)
- goto EnableInterrupts;
-
- /* Generate the count */
- for (Index = 0; Index < 8; Index++)
- {
- while (inb(GENS1(pATI->CPIO_VGABase)) & 0x08U)
- pScreenInfo->clock[ClockIndex]++;
- while (!(inb(GENS1(pATI->CPIO_VGABase)) & 0x08U))
- pScreenInfo->clock[ClockIndex]++;
- }
- break;
-
-#endif /* AVOID_CPIO */
-
- case ATI_CRTC_MACH64:
- /* Verify vertical blanking pulses are in fact occurring */
- Index = 1 << 19;
- while (!(inr(CRTC_INT_CNTL) & CRTC_VBLANK))
- if (Index-- <= 0)
- goto EnableInterrupts;
- Index = 1 << 19;
- while (inr(CRTC_INT_CNTL) & CRTC_VBLANK)
- if (Index-- <= 0)
- goto EnableInterrupts;
- Index = 1 << 19;
- while (!(inr(CRTC_INT_CNTL) & CRTC_VBLANK))
- if (Index-- <= 0)
- goto EnableInterrupts;
-
- /* Generate the count */
- for (Index = 0; Index < 4; Index++)
- {
- while (inr(CRTC_INT_CNTL) & CRTC_VBLANK)
- pScreenInfo->clock[ClockIndex]++;
- while (!(inr(CRTC_INT_CNTL) & CRTC_VBLANK))
- pScreenInfo->clock[ClockIndex]++;
- }
- break;
-
- default:
- break;
- }
-
- EnableInterrupts:
- if (CanDisableInterrupts)
- xf86EnableInterrupts();
-
- xf86SetPriority(FALSE);
- }
-
- ScaleFactor = (double)CalibrationClockValue *
- (double)pScreenInfo->clock[CalibrationClockNumber];
-
- /* Scale the clocks from counts to kHz */
- for (ClockIndex = 0; ClockIndex < NumberOfClocks; ClockIndex++)
- {
- if (ClockIndex == CalibrationClockNumber)
- pScreenInfo->clock[ClockIndex] = CalibrationClockValue;
- else if (pScreenInfo->clock[ClockIndex])
- /* Round to the nearest 10 kHz */
- pScreenInfo->clock[ClockIndex] =
- (int)(((ScaleFactor /
- (double)pScreenInfo->clock[ClockIndex]) +
- 5) / 10) * 10;
- }
-
- pScreenInfo->numClocks = NumberOfClocks;
-
-#ifndef AVOID_CPIO
-
- if (pATI->VGAAdapter != ATI_ADAPTER_NONE)
- {
- /* Restore video state */
- ATIModeSet(pScreenInfo, pATI, &pATI->OldHW);
- xfree(pATI->OldHW.frame_buffer);
- pATI->OldHW.frame_buffer = NULL;
- }
-
-#endif /* AVOID_CPIO */
-
- /* Tell user clocks were probed, instead of supplied */
- pATI->OptionProbeClocks = TRUE;
-
- /* Attempt to match probed clocks to a known specification */
- pATI->Clock = ATIMatchClockLine(pScreenInfo, pATI,
- SpecificationClockLine, NumberOfUndividedClocks,
- CalibrationClockNumber, 0);
-
-#ifndef AVOID_CPIO
-
- if ((pATI->Chip <= ATI_CHIP_18800) ||
- (pATI->Adapter == ATI_ADAPTER_V4))
- {
- /* V3 and V4 adapters don't have clock chips */
- if (pATI->Clock > ATI_CLOCK_CRYSTALS)
- pATI->Clock = ATI_CLOCK_NONE;
- }
- else
-
-#endif /* AVOID_CPIO */
-
- {
- /* All others don't have crystals */
- if (pATI->Clock == ATI_CLOCK_CRYSTALS)
- pATI->Clock = ATI_CLOCK_NONE;
- }
- }
- else
- {
- /*
- * Allow for an initial subset of specification clocks. Can't allow
- * for any more than that though...
- */
- if (NumberOfClocks > pGDev->numclocks)
- {
- NumberOfClocks = pGDev->numclocks;
- if (NumberOfUndividedClocks > NumberOfClocks)
- NumberOfUndividedClocks = NumberOfClocks;
- }
-
- /* Move XF86Config clocks into the ScrnInfoRec */
- for (ClockIndex = 0; ClockIndex < NumberOfClocks; ClockIndex++)
- pScreenInfo->clock[ClockIndex] = pGDev->clock[ClockIndex];
- pScreenInfo->numClocks = NumberOfClocks;
-
- /* Attempt to match clocks to a known specification */
- pATI->Clock = ATIMatchClockLine(pScreenInfo, pATI,
- SpecificationClockLine, NumberOfUndividedClocks, -1, 0);
-
-#ifndef AVOID_CPIO
-
- if (pATI->Adapter != ATI_ADAPTER_VGA)
-
-#endif /* AVOID_CPIO */
-
- {
- if (pATI->Clock == ATI_CLOCK_NONE)
- {
- /*
- * Reject certain clock lines that are obviously wrong. This
- * includes the standard VGA clocks for ATI adapters, and clock
- * lines that could have been used with the pre-2.1.1 driver.
- */
- if (ATIMatchClockLine(pScreenInfo, pATI, InvalidClockLine,
- NumberOfClocks, -1, 0))
- {
- pATI->OptionProbeClocks = TRUE;
- }
- else
-
-#ifndef AVOID_CPIO
-
- if ((pATI->Chip >= ATI_CHIP_18800) &&
- (pATI->Adapter != ATI_ADAPTER_V4))
-
-#endif /* AVOID_CPIO */
-
- {
- /*
- * Check for clocks that are specified in the wrong order.
- * This is meant to catch those who are trying to use the
- * clock order intended for the old accelerated servers.
- */
- while ((++ClockMap, ClockMap %= NumberOf(ClockMaps)))
- {
- pATI->Clock = ATIMatchClockLine(pScreenInfo, pATI,
- SpecificationClockLine, NumberOfUndividedClocks,
- -1, ClockMap);
- if (pATI->Clock != ATI_CLOCK_NONE)
- {
- xf86DrvMsgVerb(pScreenInfo->scrnIndex,
- X_WARNING, 0,
- "XF86Config clock ordering incorrect. Clocks"
- " will be reordered.\n");
- break;
- }
- }
- }
- }
- else
- /* Ensure crystals are not matched to clock chips, and vice versa */
-
-#ifndef AVOID_CPIO
-
- if ((pATI->Chip <= ATI_CHIP_18800) ||
- (pATI->Adapter == ATI_ADAPTER_V4))
- {
- if (pATI->Clock > ATI_CLOCK_CRYSTALS)
- pATI->OptionProbeClocks = TRUE;
- }
- else
-
-#endif /* AVOID_CPIO */
-
- {
- if (pATI->Clock == ATI_CLOCK_CRYSTALS)
- pATI->OptionProbeClocks = TRUE;
- }
-
- if (pATI->OptionProbeClocks)
- {
- xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0,
- "Invalid or obsolete XF86Config clocks line rejected.\n"
- " Clocks will be probed.\n");
- goto ProbeClocks;
- }
- }
- }
-
- if (pATI->ProgrammableClock != ATI_CLOCK_FIXED)
- {
- pATI->ProgrammableClock = ATI_CLOCK_FIXED;
- }
- else if (pATI->Clock == ATI_CLOCK_NONE)
- {
- xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0,
- "Unknown clock generator detected.\n");
- }
- else
-
-#ifndef AVOID_CPIO
-
- if (pATI->Clock == ATI_CLOCK_CRYSTALS)
- {
- xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
- "This adapter uses crystals to generate clock frequencies.\n");
- }
- else if (pATI->Clock != ATI_CLOCK_VGA)
-
-#endif /* AVOID_CPIO */
-
- {
- xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED,
- "%s clock chip detected.\n", ATIClockNames[pATI->Clock]);
- }
-
- if (pATI->Clock != ATI_CLOCK_NONE)
- {
- /* Replace undivided clocks with specification values */
- for (ClockIndex = 0;
- ClockIndex < NumberOfUndividedClocks;
- ClockIndex++)
- {
- /*
- * Don't replace clocks that are probed, documented, or set by the
- * user to zero. One exception is that we need to override the
- * user's value for the spare settings on a crystal-based adapter.
- * Another exception is when the user specifies the clock ordering
- * intended for the old accelerated servers.
- */
- SpecificationClock =
- SpecificationClockLine[pATI->Clock][ClockIndex];
- if (SpecificationClock < 0)
- break;
- if (!ClockMap)
- {
- if (!pScreenInfo->clock[ClockIndex])
- continue;
- if (!SpecificationClock)
- {
- if (pATI->Clock != ATI_CLOCK_CRYSTALS)
- continue;
- }
- else
- {
- /*
- * Due to the way clock lines are matched, the following
- * can prevent the override if the clock is probed,
- * documented or set by the user to a value greater than
- * maxClock.
- */
- if (abs(SpecificationClock -
- pScreenInfo->clock[ClockIndex]) > CLOCK_TOLERANCE)
- continue;
- }
- }
- pScreenInfo->clock[ClockIndex] = SpecificationClock;
- }
-
- /* Adjust divided clocks */
- for (ClockIndex = NumberOfUndividedClocks;
- ClockIndex < NumberOfClocks;
- ClockIndex++)
- pScreenInfo->clock[ClockIndex] = ATIDivide(
- pScreenInfo->clock[ClockIndex % NumberOfUndividedClocks],
- (ClockIndex / NumberOfUndividedClocks) + 1, 0, 0);
- }
-
- /* Tell user about fixed clocks */
- xf86ShowClocks(pScreenInfo, pATI->OptionProbeClocks ? X_PROBED : X_CONFIG);
-
- /* Prevent selection of high clocks, even by V_CLKDIV2 modes */
- for (ClockIndex = 0; ClockIndex < NumberOfClocks; ClockIndex++)
- if (pScreenInfo->clock[ClockIndex] > pRange->maxClock)
- pScreenInfo->clock[ClockIndex] = 0;
-}
-
-/*
- * ATIClockSave --
- *
- * This function saves that part of an ATIHWRec that relates to clocks.
- */
-void
-ATIClockSave
-(
- ScrnInfoPtr pScreenInfo,
- ATIPtr pATI,
- ATIHWPtr pATIHW
-)
-{
- if (pScreenInfo->vtSema && (pATI->ProgrammableClock > ATI_CLOCK_FIXED))
- {
-
-#ifndef AVOID_CPIO
-
- if (pATIHW->crtc == ATI_CRTC_VGA)
- {
- pATIHW->ClockMap = ATIVGAProgrammableClockMap;
- pATIHW->ClockUnmap = ATIVGAProgrammableClockUnmap;
- }
- else
-
-#endif /* AVOID_CPIO */
-
- {
- pATIHW->ClockMap = ATIProgrammableClockMap;
- pATIHW->ClockUnmap = ATIProgrammableClockUnmap;
- }
- }
- else
- {
-
-#ifndef AVOID_CPIO
-
- if (pATIHW->crtc != ATI_CRTC_VGA)
-
-#endif /* AVOID_CPIO */
-
- {
- pATIHW->ClockMap = ATIAcceleratorClockMap;
- pATIHW->ClockUnmap = ATIAcceleratorClockUnmap;
- }
-
-#ifndef AVOID_CPIO
-
- else if (pATI->Chip < ATI_CHIP_68800)
- {
- pATIHW->ClockMap = ATIVGAWonderClockMap;
- pATIHW->ClockUnmap = ATIVGAWonderClockUnmap;
- }
- else
- {
- pATIHW->ClockMap = ATIMachVGAClockMap;
- pATIHW->ClockUnmap = ATIMachVGAClockUnmap;
- }
-
-#endif /* AVOID_CPIO */
-
- }
-}
-
-/*
- * ATIClockCalculate --
- *
- * This function is called to generate, if necessary, the data needed for clock
- * programming, and set clock select bits in various register values.
- */
-Bool
-ATIClockCalculate
-(
- int iScreen,
- ATIPtr pATI,
- ATIHWPtr pATIHW,
- DisplayModePtr pMode
-)
-{
- int N, M, D;
- int ClockSelect, N1, MinimumGap;
- int Frequency, Multiple; /* Used as temporaries */
-
- /* Set default values */
- pATIHW->FeedbackDivider = pATIHW->ReferenceDivider = pATIHW->PostDivider = 0;
-
- if ((pATI->ProgrammableClock <= ATI_CLOCK_FIXED) ||
- ((pATI->ProgrammableClock == ATI_CLOCK_CH8398) &&
- (pMode->ClockIndex < 2)))
- {
- /* Use a fixed clock */
- ClockSelect = pMode->ClockIndex;
- }
- else
- {
- /* Generate clock programme word, using units of kHz */
- MinimumGap = ((unsigned int)(-1)) >> 1;
-
- /* Loop through reference dividers */
- for (M = pATI->ClockDescriptor.MinM;
- M <= pATI->ClockDescriptor.MaxM;
- M++)
- {
- /* Loop through post-dividers */
- for (D = 0; D < pATI->ClockDescriptor.NumD; D++)
- {
- if (!pATI->ClockDescriptor.PostDividers[D])
- continue;
-
- /* Limit undivided VCO to maxClock */
- if (pATI->maxClock &&
- ((pATI->maxClock / pATI->ClockDescriptor.PostDividers[D]) <
- pMode->Clock))
- continue;
-
- /*
- * Calculate closest feedback divider and apply its
- * restrictions.
- */
- Multiple = M * pATI->ReferenceDenominator *
- pATI->ClockDescriptor.PostDividers[D];
- N = ATIDivide(pMode->Clock * Multiple,
- pATI->ReferenceNumerator, 0, 0);
- if (N < pATI->ClockDescriptor.MinN)
- N = pATI->ClockDescriptor.MinN;
- else if (N > pATI->ClockDescriptor.MaxN)
- N = pATI->ClockDescriptor.MaxN;
- N -= pATI->ClockDescriptor.NAdjust;
- N1 = (N / pATI->ClockDescriptor.N1) * pATI->ClockDescriptor.N2;
- if (N > N1)
- N = ATIDivide(N1 + 1, pATI->ClockDescriptor.N1, 0, 1);
- N += pATI->ClockDescriptor.NAdjust;
- N1 += pATI->ClockDescriptor.NAdjust;
-
- for (; ; N = N1)
- {
- /* Pick the closest setting */
- Frequency = abs(ATIDivide(N * pATI->ReferenceNumerator,
- Multiple, 0, 0) - pMode->Clock);
- if ((Frequency < MinimumGap) ||
- ((Frequency == MinimumGap) &&
- (pATIHW->FeedbackDivider < N)))
- {
- /* Save settings */
- pATIHW->FeedbackDivider = N;
- pATIHW->ReferenceDivider = M;
- pATIHW->PostDivider = D;
- MinimumGap = Frequency;
- }
-
- if (N <= N1)
- break;
- }
- }
- }
-
- Multiple = pATIHW->ReferenceDivider * pATI->ReferenceDenominator *
- pATI->ClockDescriptor.PostDividers[pATIHW->PostDivider];
- Frequency = pATIHW->FeedbackDivider * pATI->ReferenceNumerator;
- Frequency = ATIDivide(Frequency, Multiple, 0, 0);
- if (abs(Frequency - pMode->Clock) > CLOCK_TOLERANCE)
- {
- xf86DrvMsg(iScreen, X_ERROR,
- "Unable to programme clock %.3fMHz for mode %s.\n",
- (double)(pMode->Clock) / 1000.0, pMode->name);
- return FALSE;
- }
- pMode->SynthClock = Frequency;
- ClockSelect = pATI->ClockNumberToProgramme;
-
- xf86ErrorFVerb(4,
- "\n Programming clock %d to %.3fMHz for mode %s."
- " N=%d, M=%d, D=%d.\n",
- ClockSelect, (double)Frequency / 1000.0, pMode->name,
- pATIHW->FeedbackDivider, pATIHW->ReferenceDivider,
- pATIHW->PostDivider);
-
- if (pATI->Chip >= ATI_CHIP_264VTB)
- ATIDSPCalculate(pATI, pATIHW, pMode);
- }
-
- /* Set clock select bits, after remapping them */
- pATIHW->clock = ClockSelect; /* Save pre-map clock number */
- ClockSelect = MapClockIndex(pATIHW->ClockMap, ClockSelect);
-
- switch (pATIHW->crtc)
- {
-
-#ifndef AVOID_CPIO
-
- case ATI_CRTC_VGA:
- pATIHW->genmo = (pATIHW->genmo & 0xF3U) |
- ((ClockSelect << 2) & 0x0CU);
-
- if (pATI->CPIO_VGAWonder)
- {
- /* Set ATI clock select bits */
- if (pATI->Chip <= ATI_CHIP_18800)
- {
- pATIHW->b2 = (pATIHW->b2 & 0xBFU) |
- ((ClockSelect << 4) & 0x40U);
- }
- else
- {
- pATIHW->be = (pATIHW->be & 0xEFU) |
- ((ClockSelect << 2) & 0x10U);
- if (pATI->Adapter != ATI_ADAPTER_V4)
- {
- ClockSelect >>= 1;
- pATIHW->b9 = (pATIHW->b9 & 0xFDU) |
- ((ClockSelect >> 1) & 0x02U);
- }
- }
-
- /* Set clock divider bits */
- pATIHW->b8 = (pATIHW->b8 & 0x3FU) |
- ((ClockSelect << 3) & 0xC0U);
- }
- break;
-
-#endif /* AVOID_CPIO */
-
- case ATI_CRTC_MACH64:
- pATIHW->clock_cntl = CLOCK_STROBE |
- SetBits(ClockSelect, CLOCK_SELECT | CLOCK_DIVIDER);
- break;
-
- default:
- break;
- }
-
- return TRUE;
-}
-
-/*
- * ATIClockSet --
- *
- * This function is called to programme a clock for the mode being set.
- */
-void
-ATIClockSet
-(
- ATIPtr pATI,
- ATIHWPtr pATIHW
-)
-{
- CARD32 crtc_gen_cntl, tmp;
- CARD8 clock_cntl0;
- CARD8 tmp2;
- unsigned int Programme;
- int N = pATIHW->FeedbackDivider - pATI->ClockDescriptor.NAdjust;
- int M = pATIHW->ReferenceDivider - pATI->ClockDescriptor.MAdjust;
- int D = pATIHW->PostDivider;
-
- /* Temporarily switch to accelerator mode */
- crtc_gen_cntl = inr(CRTC_GEN_CNTL);
- if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN))
- outr(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_EXT_DISP_EN);
-
- switch (pATI->ProgrammableClock)
- {
- case ATI_CLOCK_ICS2595:
- clock_cntl0 = in8(CLOCK_CNTL);
-
- Programme = (SetBits(pATIHW->clock, ICS2595_CLOCK) |
- SetBits(N, ICS2595_FB_DIV) | SetBits(D, ICS2595_POST_DIV)) ^
- ICS2595_TOGGLE;
-
- ATIDelay(50000); /* 50 milliseconds */
-
- (void)xf86DisableInterrupts();
-
- /* Send all 20 bits of programme word */
- while (Programme >= CLOCK_BIT)
- {
- tmp = (Programme & CLOCK_BIT) | CLOCK_STROBE;
- out8(CLOCK_CNTL, tmp);
- ATIDelay(26); /* 26 microseconds */
- out8(CLOCK_CNTL, tmp | CLOCK_PULSE);
- ATIDelay(26); /* 26 microseconds */
- Programme >>= 1;
- }
-
- xf86EnableInterrupts();
-
- /* Restore register */
- out8(CLOCK_CNTL, clock_cntl0 | CLOCK_STROBE);
- break;
-
- case ATI_CLOCK_STG1703:
- (void)ATIGetDACCmdReg(pATI);
- (void)in8(M64_DAC_MASK);
- out8(M64_DAC_MASK, (pATIHW->clock << 1) + 0x20U);
- out8(M64_DAC_MASK, 0);
- out8(M64_DAC_MASK, SetBits(N, 0xFFU));
- out8(M64_DAC_MASK, SetBits(M, 0x1FU) | SetBits(D, 0xE0U));
- break;
-
- case ATI_CLOCK_CH8398:
- tmp = inr(DAC_CNTL) | (DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3);
- outr(DAC_CNTL, tmp);
- out8(M64_DAC_WRITE, pATIHW->clock);
- out8(M64_DAC_DATA, SetBits(N, 0xFFU));
- out8(M64_DAC_DATA, SetBits(M, 0x3FU) | SetBits(D, 0xC0U));
- out8(M64_DAC_MASK, 0x04U);
- outr(DAC_CNTL, tmp & ~(DAC_EXT_SEL_RS2 | DAC_EXT_SEL_RS3));
- tmp2 = in8(M64_DAC_WRITE);
- out8(M64_DAC_WRITE, (tmp2 & 0x70U) | 0x80U);
- outr(DAC_CNTL, tmp & ~DAC_EXT_SEL_RS2);
- break;
-
- case ATI_CLOCK_INTERNAL:
- /* Reset VCLK generator */
- ATIMach64PutPLLReg(PLL_VCLK_CNTL, pATIHW->pll_vclk_cntl);
-
- /* Set post-divider */
- tmp2 = pATIHW->clock << 1;
- tmp = ATIMach64GetPLLReg(PLL_VCLK_POST_DIV);
- tmp &= ~(0x03U << tmp2);
- tmp |= SetBits(D, 0x03U) << tmp2;
- ATIMach64PutPLLReg(PLL_VCLK_POST_DIV, tmp);
-
- /* Set extended post-divider */
- tmp = ATIMach64GetPLLReg(PLL_XCLK_CNTL);
- tmp &= ~(SetBits(1, PLL_VCLK0_XDIV) << pATIHW->clock);
- tmp |= SetBits(D >> 2, PLL_VCLK0_XDIV) << pATIHW->clock;
- ATIMach64PutPLLReg(PLL_XCLK_CNTL, tmp);
-
- /* Set feedback divider */
- tmp = PLL_VCLK0_FB_DIV + pATIHW->clock;
- ATIMach64PutPLLReg(tmp, SetBits(N, 0xFFU));
-
- /* End VCLK generator reset */
- ATIMach64PutPLLReg(PLL_VCLK_CNTL,
- pATIHW->pll_vclk_cntl & ~PLL_VCLK_RESET);
-
- /* Reset write bit */
- ATIMach64AccessPLLReg(pATI, 0, FALSE);
- break;
-
- case ATI_CLOCK_ATT20C408:
- (void)ATIGetDACCmdReg(pATI);
- tmp = in8(M64_DAC_MASK);
- (void)ATIGetDACCmdReg(pATI);
- out8(M64_DAC_MASK, tmp | 1);
- out8(M64_DAC_WRITE, 1);
- out8(M64_DAC_MASK, tmp | 9);
- ATIDelay(400); /* 400 microseconds */
- tmp2 = (pATIHW->clock << 2) + 0x40U;
- out8(M64_DAC_WRITE, tmp2);
- out8(M64_DAC_MASK, SetBits(N, 0xFFU));
- out8(M64_DAC_WRITE, ++tmp2);
- out8(M64_DAC_MASK, SetBits(M, 0x3FU) | SetBits(D, 0xC0U));
- out8(M64_DAC_WRITE, ++tmp2);
- out8(M64_DAC_MASK, 0x77U);
- ATIDelay(400); /* 400 microseconds */
- out8(M64_DAC_WRITE, 1);
- out8(M64_DAC_MASK, tmp);
- break;
-
- case ATI_CLOCK_IBMRGB514:
- /*
- * Here, only update in-core data. It will be written out later by
- * ATIRGB514Set().
- */
- tmp = (pATIHW->clock << 1) + 0x20U;
- pATIHW->ibmrgb514[tmp] =
- (SetBits(N, 0x3FU) | SetBits(D, 0xC0U)) ^ 0xC0U;
- pATIHW->ibmrgb514[tmp + 1] = SetBits(M, 0x3FU);
- break;
-
- default:
- break;
- }
-
- (void)in8(M64_DAC_WRITE); /* Clear DAC counter */
-
- /* Restore register */
- if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN))
- outr(CRTC_GEN_CNTL, crtc_gen_cntl);
-}
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 22:49:43 +0000