summaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)AuthorFilesLines
2018-12-31chamelium: Pass the pattern block size as argument to helpersPaul Kocialkowski1-5/+7
This adds a new block size argument to the pattern generation helpers so that different sizes of blocks can be used. In the future, this allows us to use different block sizes when testing overlay planes, making it visually explicit what is part of the main plane and what is part of the overlay plane. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
2018-12-31chamelium: Pass dimensions instead of mode to pattern generation helperPaul Kocialkowski1-6/+5
In order to reuse the pattern generation helper for overlay planes, let's provide the pattern generation helper with the explicit dimensions instead of the mode (that only applies to the primary plane). Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Lyude Paul <lyude@redhat.com>
2018-12-31chamelium: Pass and use stride for xr24 pattern paintPaul Kocialkowski1-3/+5
Using the width from the selected mode is not sufficient to correctly paint a pattern on the framebuffer memory: the stride also has to be taken in account for proper line start alignment. Pass the stride and use it in chamelium_paint_xr24_pattern. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-31chamelium: Fix inverted xr24 pattern paint dimensionsPaul Kocialkowski1-1/+1
The xr24 pattern for chamelium testing appears mangled when checking it on an actual display. This is because the horizontal and vertical display sizes are inverted when used as width and height. Put them back in order. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-12-17igt/amdgpu_amd_prime: Bail if we fail to create more contextsChris Wilson1-2/+3
amdgpu has started to report out of space after creating a few contexts. This is not the scope of this test as here we are just verifying that fences created in amd can be imported and used for synchronisation by i915 and for that we just need at least one context created! References: https://bugs.freedesktop.org/show_bug.cgi?id=109049 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Antonio Argenziano <antonio.argenziano@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-15tests/kms_frontbuffer_tracking: Make sure GPU is quiescent before handling ↵Maarten Lankhorst1-2/+8
assertions, v2. Typically PSR enables in around 136 ms, but on some tests the we have to explicitly make sure that the gpu is idle before rendering. Otherwise, sometimes we wait for the background flusher to finish, which will take at least a second longer, and causes the wait for PSR to timeout. On kms_frontbuffer_tracking: Starting subtest: psr-2p-scndscrn-shrfb-plflip-blt psr_active(debugfs_fd, true) took 136ms psr_active(debugfs_fd, true) took 136ms psr_active(debugfs_fd, true) took 350ms psr_active(debugfs_fd, true) took 136ms psr_active(debugfs_fd, true) took 1598ms Changes since v1: - Do not call gem_quiescent_gpu on modesetfrombusy subtest, or we get a timeout. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108733 Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v1
2018-12-14tests/perf: bump max number of block/poll interationsLionel Landwerlin1-14/+2
Those 2 tests fail regularly on HSW, probably because the OA period aligns slightly differently there because of the differnce in the timestamp frequency between HSW and other generation. Just bump the max number by 1 to fix the issue. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102252 Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2018-12-11Allow a full modeset in kms_properties atomic caseStanislav Lisovskiy1-1/+1
Otherwise we are getting EINVAL as drm requires it at some point. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108642 Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-12-10lib/kms: Enable outputs by default in igt_require_displayDaniel Vetter2-3/+0
More testing, automatically when using the high-level kms helpers! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-12-05igt/pm_rpm: Show the contents of i915_runtime_pm_status on setupChris Wilson1-0/+14
To try and help debug situations where the driver has leaked a runtime reference before executing the pm_rpm tests, show the contents of i915_runtime_pm_status at startup, which will include all currently held wakerefs. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Antonio Argenziano <antonio.argenziano@intel.com>
2018-12-04igt/pm_rpm: Ignore modesets for basic tests with no KMSChris Wilson1-3/+8
If KMS is not available, we cannot simply turn on an output and expect that to wake the device up. As such we have to ignore that part of the basic subtest and simply proclaim victory if the device is able to sleep! v2: Mention that we can test wakeup via nop execbuf in future. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2018-12-04tests/kms_rotation_crc: static before constDaniel Vetter1-3/+3
My gcc is unhappy otherwise: [191/829] Compiling C object 'tests/te...otation_crc@exe/kms_rotation_crc.c.o'. ../tests/kms_rotation_crc.c: In function ‘test_multi_plane_rotation’: ../tests/kms_rotation_crc.c:497:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] const static struct { ^~~~~ ../tests/kms_rotation_crc.c:524:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] const static uint32_t formatlist[] = {DRM_FORMAT_RGB565, ^~~~~ Fixes commit 14c1b132c8f829637c55fb071a9a2e5ce00e7ed8 Author: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Date: Fri Nov 30 15:34:36 2018 +0200 tests/kms_rotation_crc: Add multi plane tests v2: Trim extra space while at it (Petri). Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Petri Latvala <petri.latvala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-12-04tests/kms_rotation_crc: Add multi plane testsJuha-Pekka Heikkila1-0/+246
Add three new tests which try primary and sprite planes next to each other with different plane formats, rotations and tiling modes. multiplane-rotation subtest run test through with both planes fully visible. multiplane-rotation-cropping-top will crop primary plane to left/top corner and sprite plane to right/top corner while running rotation tests. multiplane-rotation-cropping-bottom will crop primary plane to left/bottom corner and sprite plane to right/bottom corner while running rotation tests. v2 (Nautiyal, Ankit K): Use rectangular figures instead of square figures and fix associated code to perform correctly. Adjust plane positions according to screen size to avoid putting planes outside screen. v3 (Nautiyal, Ankit K): Minor detail fix. Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2018-12-04tests/kms_plane: add source clamping testJuha-Pekka Heikkila1-3/+54
Add test which create fb bigger than plane and clamp fb from all sides. v2 (Maarten Lankhorst): Fix typo, create different color border around clamped fb where during test border should stay outside visible area. Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-12-03chamelium: Fix analog bridge detection memory leakPaul Kocialkowski1-4/+6
The connector and EDID blob retrieved when checking for analog bridges need to be freed before returning from the associated function. Fixes: f8d6afa67 ("tests/chamelium: Detect analog bridges and handle EDID accordingly") Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
2018-11-27v3d_*: Add new tests for the V3D UABI.Eric Anholt8-0/+256
These are basic non-rendering tests of the UABI. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Petri Latvala <petri.latvala@intel.com>
2018-11-27tests/gem_ctx_param: Missing igt_fixtureDaniel Vetter1-6/+6
It's not cool to run an ioctl outside of igt_fixture. Reported-by: Petri Latvala <petri.latvala@intel.com> Cc: Petri Latvala <petri.latvala@intel.com> Reviewed-by: Petri Latvala <petri.latvala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-11-27tests: Use igt_display_requireDaniel Vetter10-15/+16
Remaining tests that have been overlooked and don't need any invasive changes to limit the skipping to only the relevant parts. v2: [A rebase gone wrong] v3: Move the misplaced hunk to the right patch (Antonio). v4: Rebase, kms_content_protection is new. v5: Rebase - need to adjust kms_lease.c too. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v3) Cc: Antonio Argenziano <antonio.argenziano@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-By: Antonio Argenziano <antonio.argenziano@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-27tests/debugfs: use igt_display_requireDaniel Vetter1-14/+28
Need to extract into a test subgroup to make sure we only skip the tests that need display support. v2: Chris pointed out that "read-all-entries" was the original non-kms tests, and we don't want to skip that if there's no output. Make a seperate test for this. Also, that kind of where libraries magically second-guess what the test might have wanted when it supplies an invalid request is exactly why I want to fix the igt_display_init API regression. v3: Actually squash in the hunk that was supposed to do v2 into this patch (Antonio). Cc: Antonio Argenziano <antonio.argenziano@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-By: Antonio Argenziano <antonio.argenziano@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-26tests: close(fd) without igt_fixture considered harmfulDaniel Vetter3-3/+6
Some tests assume that close on an unopened fd is fine, except it's not just unopened but actually stack garbage. There's a good chance we end up running close(0), which wreaks the testcase enumeration. Fix this. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Not sure there's a better way to catch this than git grep plus lots of manual auditing ... The unit tests only catch it by accident (x86 works fine, I hit it in one testcase only cross-building to aarch64). v2: Note that gem_pread_after_blit uses heap memory, so is actually guaranteed to run close(0). Noticed by Jani. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-11-23igt/gem_exec_capture: Capture many, many objectsChris Wilson3-3/+350
Exercise O(N^2) behaviour in reading the error state, and push it to the extreme. Reported-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Katarzyna Dec <katarzyna.dec@intel.com>
2018-11-22tests/sw_sync: use igt_fork_helperDaniel Vetter1-36/+18
I'll need to wrap a bit of magic around all the fork() calls in our tests. Simplest way to get there is to roll out the existing helpers, which even saves a bit of boilerplate code. Cc: Robert Foss <robert.foss@collabora.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-11-20lib/batchbuffer: Set bpp in igt_buf.Maarten Lankhorst14-0/+24
We want to allow bpp = 8 or 16, so make sure we set the bpp in igt_buf. This way we can extend rendercopy to support other values for bpp. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [mlankhorst: Fix double ;; (Ville] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-11-20tests/perf: buffer-fill: drop load helper usageLionel Landwerlin1-6/+0
It makes the tests more reliable because the expected number of reports is more acurate (given that we'll have almost no context-switch reports). Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2018-11-19tests/i915/gem_render_tiled_blits: Make sure igt_buf is initially zero'dMaarten Lankhorst1-1/+1
gen8_bind_buf looks at buf->aux.stride/offset, which is not set by the test. When I added the bpp field, it was enough to make the test fail, fix this by making sure that the buf is initially zero'd explicitly, which fixes the test to run reliably 100% of the time. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Petri Latvala <petri.latvala@intel.com> #irc
2018-11-16kms_content_protection: Fix log bug on 32-bit platforms.Eric Anholt1-1/+2
long is different between 32 and 64 and should basically never be used. Fixes compiler warning about passing the wrong type. v2: Use the PRId64 macros instead of long long. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-11-16tests: Move drv_ tests to i915 directoryArkadiusz Hiler12-29/+40
The drv_ tests are i915 specific, so let's move them to i915 directory and change the binary prefix to i915_. Additionally, while we at moving stuff around, let's rename module_reload to module_load and do the following cleanup with the subtests: basic-reload -> reload basic-no-display -> reload-no-display basic-reload-inject -> reload-with-fault-injection Cc: Martin Peres <martin.peres@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Petri Latvala <petri.latvala@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Martin Peres <martin.peres@linux.intel.com>
2018-11-08tests/i915/query: more accurate available/fused topology printoutLionel Landwerlin1-2/+10
Make availability of all elements more visible for debug purposes. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2018-11-08tests/kms_lease: improve the unleased_connector/crtc testsDaniel Vetter1-15/+23
We need to use raw ioctl since using the igt_kms library is fairly brittle against changes in the library. This fixes the last subtest failure due to the rebasing onto latest kernel and igt. Note that the revoke test doesn't have such a problem, because the igt library has been initialized when everything was still there. Hence we will never blow up in the library after the revoke happened. Reviewed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-11-08tests/kms_lease|sequence: Make sure we're masterDaniel Vetter2-2/+2
Reviewed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-08tests/kms_lease: improve lease_get subtestDaniel Vetter1-11/+31
Again it failed to fill in the pad field. It also had the wrong assumptions about planes being included. Plus again add a bunch more paranoid checks. And make sure the primary plane is included, too. Reviewed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-08tests/kms_lease: improve lesssee_list subtestsDaniel Vetter1-0/+20
It failed to clear the pad, which made me realize that it's missing a few paranoid checks. Reviewed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-08tests/kms_lease: Adjsut to universal_planes uapi changesDaniel Vetter1-0/+4
We need to also ask for a plane when universal planes is enabled, which the igt_display library does by default. Reviewed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-08tests/kms_lease: use interactive debug helpersDaniel Vetter1-1/+1
Much faster, since when not enabled they proceed right away. Reviewed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-11-08tests/kms_lease: add tests for lease ioctls [v2]Keith Packard3-0/+595
Validate that the leasing API creates leases that allow access to a subset of the available resources and that lease revocation works. v2: from Dave Airlie <airlied@redhat.com> * Update ioctl numbers to latest proposed values. * Fix commit message * Add tests for get_lease and list_lessees v3: - Rebase - drop the get_driving_output test, that's already taken care of by the for_each_valid_output loop. Signed-off-by: Keith Packard <keithp@keithp.com> (v2) Reviewed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-11-08tests/kms_sequence: Add tests for new CRTC get/queue sequence ioctls [v2]Keith Packard3-0/+319
These ioctls replace drmWaitVBlank and add ns time resolution and 64-bit sequence numbers to comply with the Vulkan API specifications. The tests were derived from the existing kms_vblank tests with the 'wait' variant elided as the new API doesn't provide a mechanism for blocking in the kernel. v2: from Dave Airlie <airlied@redhat.com> * Add local definitions of new ioctls to avoid requiring latest libdrm. * Remove FIRST_PIXEL_OUT as that has been removed from the proposed kernel patches. v3: - Rebase - drop the export of igt_output_get_driving_pipe, the tests do full modesets already. Signed-off-by: Keith Packard <keithp@keithp.com> (v2) Reviewed-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-11-07tests/kms_frontbuffer_tracking: Really do not skip on 4k displays, v2.Maarten Lankhorst1-12/+9
The previous fixes to kms_frontbuffer_tracking fixed the sharedfb tests, but the stridechange test still creates its own fb. Use the existing 'big' fb to force a stride change, without ending up with an excessive stride. Changes since v1: - Use the big fb used by the shrfb tests. It already exists and has the right dimensions, so why not? Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-11-06tests/kms_atomic_transition: Do not timeout when number of sprites is huge, v5.Maarten Lankhorst1-7/+37
We mostly care about the plane type, because sometimes the driver may do silly things when only a cursor is enabled for example, so we reduce the number of tests. This puts an upper bound on the number of plane combinations being tested, which is nice for gen11. Changes since v1: - Make 2 groups for overlay planes, and randomly put planes in either group. Changes since v2: - Include igt_rand.h to compiler error. Changes since v3: - Fix logical error resulting in crash. Changes since v4: - Fix logical error harder. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v3
2018-11-06tests/kms_properties: Fix compiler warningPetri Latvala1-1/+1
../tests/kms_properties.c:113:11: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] Fixes: 7983e19ed62e ("tests/kms_properties: Add functional test for "max bpc" property") Signed-off-by: Petri Latvala <petri.latvala@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-05tests/tools_test: Find the tool binaries also from bindirPetri Latvala1-7/+21
Also print what directory gets used. v2: Use PATH_MAX Signed-off-by: Petri Latvala <petri.latvala@intel.com> Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
2018-11-02tests/kms_properties: Add functional test for "max bpc" propertyRadhakrishna Sripada1-1/+31
Test the values in the range advertised by the "max bpc" property. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-11-02tests/kms_properties: Add additional prperty test infrastructureRadhakrishna Sripada1-1/+27
We currently test the existimg properties by setting them with default value. Add infrastructure to perform additional test on a desired property. v2: Fix the strcmp logic Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-10-31igt/gem_ppgtt: Unroll 32b memsetChris Wilson1-3/+7
Manually unroll the 32b memset in create_bo() to set a cacheline at a time, for a 2x speed improve of the whole test. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
2018-10-30igt/gem_tiled_fence_blits: Remember to mark up fence blitsChris Wilson1-0/+2
Older platforms require fence registers to perform blits, and so userspace is expected to mark up the objects to request fences be assigned. Fixes: ff2db94acb53 ("igt/gem_tiled_fence_blits: Remove libdrm_intel dependence") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108591 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-10-29tests/kms_content_protection: restore for real before failingDaniel Vetter1-3/+2
Nothing happens if you don't commit ... v2: rebased!? Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108550 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108549 Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-10-26kms_plane_alpha_blend: Start CRC after enabling display.Maarten Lankhorst1-3/+10
This will fix the -EIO from trying to start CRC on a disabled pipe. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108146 Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com>
2018-10-26igt/gem_tiled_fence_blits: Remove libdrm_intel dependenceChris Wilson1-78/+110
Modernise the test to use igt's ioctl library as opposed to the antiquated libdrm_intel. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2018-10-25tests/kms_content_protection: Avoid dmesg falloutDaniel Vetter1-1/+6
Subsequent tests have become really unhappy. Paper over this for now. If this doesn't work, then I think we need to revert. v2: Use Ram's suggestion for comment. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108550 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108549 Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2018-10-25kms_content_protection: Add Content Protection testRamalingam C3-0/+304
Pretty simple test: - picks the hdcp capable output with suitable pipe and apply modeset. - checks the connected sink's hdcp capability through debugfs - apply a FB and wait for the flip completion. - clears the content protection property - verifies that it clears - sets the content protection property to desired - verifies that it transitions to enabled - incase of timeout three reattempts are implemented - clear the content protection property and modeset on the crtc Above steps are repeated on all HDCP capable connectors for both legacy and atomic subtests. v2: dynamic subtests are dropped [Daniel] v3: debugfs is used to detect the sink's hdcp capability [Daniel] data structure is made as global variable. v4: debugfs file from connector's debugfs dir is used [Daniel] v5: i915_debugfs_connector_dir() usage is modified [Chris] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-10-24tests/kms_rotation_crc: Don't leave crc runningJuha-Pekka Heikkila1-4/+8
Leaving crc running nobody reading it may fail tests randomly with dmesg comment "*ERROR* Overflow of CRC buffer, userspace reads too slow." v2 (Maarten Lankhorst): Don't change clean up code but just add flag for starting crc and stop it at end of test. bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105748 Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-28 13:37:39 +0000