diff options
Diffstat (limited to 'src/shaders/post_processing/gen7/PA_DI_PA.g4a')
| -rw-r--r-- | src/shaders/post_processing/gen7/PA_DI_PA.g4a | 421 |
1 files changed, 0 insertions, 421 deletions
diff --git a/src/shaders/post_processing/gen7/PA_DI_PA.g4a b/src/shaders/post_processing/gen7/PA_DI_PA.g4a deleted file mode 100644 index d269665..0000000 --- a/src/shaders/post_processing/gen7/PA_DI_PA.g4a +++ /dev/null @@ -1,421 +0,0 @@ -/* - * Copyright 2000-2011 Intel Corporation All Rights Reserved - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sub license, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. - * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR - * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * This file was originally licensed under the following license - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -// 57 // Total instruction count -// 1 // Total kernel count - -.kernel PA_DI_PA -.code - - - -// FileName: DI.asm -// Author: Vivek Kumar -// Description: Tasks for DI only case (16x4 block) - - - - -// Module name: common.inc -// -// Common header file for all Video-Processing kernels -// - -.default_execution_size (16) -.default_register_type :ub - -.reg_count_total 128 -.reg_count_payload 7 - -//========== Common constants ========== - - -//========== Macros ========== - - -//Fast Jump, For more details see "Set_Layer_N.asm" - - -//========== Defines ==================== - -//========== Static Parameters (Common To All) ========== -//r1 - - -//r2 - - // e.g. byte0 byte1 byte2 - // YUYV 0 1 3 - // YVYU 0 3 1 - -//Color Pipe (IECP) parameters - - -//ByteCopy - - -//r4 - - // e.g. byte0 byte1 byte2 - // YUYV 0 1 3 - // YVYU 0 3 1 - - -//========== Inline parameters (Common To All) =========== - - -//============== Binding Index Table=========== -//Common between DNDI and DNUV - - -//================= Common Message Descriptor ===== -// Message descriptor for thread spawning -// Message Descriptors -// = 000 0001 (min message len 1 ) 0,0000 (resp len 0 -add later) -// 0000,0000,0000 -// 0001(Spawn a root thread),0001 (Root thread spawn thread) -// = 0x02000011 -// Thread Spawner Message Descriptor - - -// Message descriptor for atomic operation add -// Message Descriptors -// = 000 0110 (min message len 6 ) 0,0000 (resp len 0 -add later) -// 1(header present)001,10(typed atomic operation)0(return enabled)0(slot group, low 8 bits),0111 (AOP_Add) -// 0000,0000 (Binding table index, added later) -// = 0x02000011 - -// Atomic Operation Add Message Descriptor - - -// Message descriptor for dataport media write - // Message Descriptors - // = 000 0001 (min message len 1 - add later) 00000 (resp len 0) - // 1 (header present 1) 0 1010 (media block write) 000000 - // 00000000 (binding table index - set later) - // = 0x020A8000 - - -// Message Length defines - - -// Response Length defines - - -// Block Width and Height Size defines - - -// Extended Message Descriptors - - -// Common message descriptors: - - -//===================== Math Function Control =================================== - - -//============ Message Registers =============== - // buf4 starts from r28 - - -//#define mMSGHDR_EOT r43 // Dummy Message Register for EOT - - -.declare mubMSGPAYLOAD Base=r30 ElementSize=1 SrcRegion=<16;16,1> Type=ub -.declare muwMSGPAYLOAD Base=r30 ElementSize=2 SrcRegion=<16;16,1> Type=uw -.declare mudMSGPAYLOAD Base=r30 ElementSize=4 SrcRegion=<8;8,1> Type=ud -.declare mfMSGPAYLOAD Base=r30 ElementSize=4 SrcRegion=<8;8,1> Type=f - -//=================== End of thread instruction =========================== - - -//=====================Pointers Used===================================== - - -//======================================================================= - - -//r11-r17 -// Define temp space for any usages - - -// Common Buffers - - -// temp space for rotation - -.declare fROBUF Base=r11.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f - -.declare udROBUF Base=r11.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud - -.declare uwROBUF Base=r11.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw - -.declare ubROBUF Base=r11.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub - -.declare ub4ROBUF Base=r11.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub - - -// End of common.inc - - -// FileName: DNDI.inc -// Author: Vivek Kumar -// Description: Include file for DN, DI and DNDI -// Inputs: DI_ENABLE, DN_ENABLE, DN_PLANAR, DN_PACKED - - - - -// End of common.inc - - -//Interface: -//Static Parameters: -//r1 - - -//====================== Binding table (Explicit To DNDI)========================================= - - -.declare mudMSGHDR_DNDI Base=r18 ElementSize=4 Type=ud -.declare mdMSGHDR_DNDI Base=r18 ElementSize=4 Type=d -.declare mwMSGHDR_DNDI Base=r18 ElementSize=2 Type=w - - -.declare mudMSGHDR_STMM Base=r20 ElementSize=4 Type=ud - - -.declare mudMSGHDR_HIST Base=r22 ElementSize=4 Type=ud - - -.declare mudMSGHDR_ENC_STATS Base=r24 ElementSize=4 Type=ud -.declare muwMSGHDR_ENC_STATS Base=r24 ElementSize=2 Type=uw -.declare mubMSGHDR_ENC_STATS Base=r24 ElementSize=1 Type=ub - - -.declare mudMSGHDR_DN_OUT Base=r31.0 ElementSize=4 Type=ud -.declare mdMSGHDR_DN_OUT Base=r31.0 ElementSize=4 Type=d -.declare mubMSGHDR_DN_OUT Base=r31.0 ElementSize=1 Type=ub - - -.declare mudMSGHDR_UVCOPY Base=r36 ElementSize=4 Type=ud -.declare mdMSGHDR_UVCOPY Base=r36 ElementSize=4 Type=d -.declare mudMSGHDR_UCOPY Base=r36 ElementSize=4 Type=ud -.declare mudMSGHDR_VCOPY Base=r38 ElementSize=4 Type=ud - - -.declare mudMSGHDR_DI_OUT1 Base=r18.0 ElementSize=4 Type=ud -.declare mubMSGHDR_DI_OUT1 Base=r18.0 ElementSize=1 Type=ub - - -.declare mudMSGHDR_DI_OUT2 Base=r23.0 ElementSize=4 Type=ud -.declare mubMSGHDR_DI_OUT2 Base=r23.0 ElementSize=1 Type=ub - -//r45 -//Use r45 as message header, so no need to "mov" the data. - -.declare mudDN_Y_OUT Base=r45.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud - -// Message response (Denoised & DI-ed pixels & statistics); Use buffer 5 -.declare udDNDI_RESP Base=r46.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud -.declare uwDNDI_RESP Base=r46.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw -.declare ubDNDI_RESP Base=r46.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub - -// Message response (UV Copy); Use buffer 5 -.declare udDNDI_UV_RESP Base=r58.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud -.declare ubDNDI_UV_RESP Base=r58.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub - -//Temp GRFs: For 42X to 422 Conversion -.declare uwDNDI_UVCOPY_TEMP Base=r10.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw //8 GRFs -.declare ubDNDI_UVCOPY_TEMP Base=r10.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub //8 GRFs -//--------------------------------------------------------------------------- -// Message descriptors -//--------------------------------------------------------------------------- -// Extended message descriptor - // Message descriptor for sampler read - // = 000 0010 (message len 2) 00000 (resp len - set later, 12 or 5 or 11) - // 1 (header present 1) 0 11 (SIMD32/64 mode) - // 1000 (message type) 0000 (DI state index) - // 00000000 (binding table index - set later) - // = 0x040b8000 - - -// Attention: The Message Length is The Number of GRFs with Data Only, without the Header - - -//--------------------------------------------------------------------------- -// VDI Return Data format -//--------------------------------------------------------------------------- -// Defines for DI enabled - - -// Defines for DI disabled - - - -// FileName: DNDI_Command.asm -// Author: Vivek Kumar -// Description: Sends a message to the VDI to process one DN (16x8) or DNDI (16x4) block - -// Prepare the DNDI send command -mov (8) mudMSGHDR_DNDI(0)<1> r0.0<8;8,1>:ud // message header -mov (1) mwMSGHDR_DNDI(1,4)<1> r9.0<0;1,0>:w { NoDDClr } // horizontal origin // Do we need to add offset here? -vK -mov (1) mwMSGHDR_DNDI(1,12)<1> r9.1<0;1,0>:w { NoDDChk } // vertical origin // Can these 2 be combined? - vK - -send (8) udDNDI_RESP(0)<1> r18 0x2 0x4AE8003:ud - -// On Gen6, with VDI walker, use the XY pair returned rather than programmed above -// VDI_RETURNED_XY is ordered XY in case of walker enables and the same as programmed in case of walker disabled -mov (2) r9.0<1>:w uwDNDI_RESP(9,14)<2;2,1> // horizontal/Vertial origin in W.14 and W.15 - - - -// FileName: DI_STMM_Save.asm -// Author: Vivek Kumar -// Description: Saves DI STMM Data to statistics surface in case of DI enabled (for 16x4 block) - -// Write STMM to memory -mov (8) mudMSGHDR_STMM(0)<1> r0.0<8;8,1>:ud // message header -mov (8) mudMSGHDR_STMM(1)<1> udDNDI_RESP(8,0) // Move STMM to MRF - -shr (1) mudMSGHDR_STMM(0,0)<1> r9.0<0;1,0>:w 1:w { NoDDClr } // X origin / 2 -mov (1) mudMSGHDR_STMM(0,1)<1> r9.1<0;1,0>:w { NoDDClr, NoDDChk } // Y origin -mov (1) mudMSGHDR_STMM(0,2)<1> 0x30007:ud { NoDDChk } // block width and height (8x4) - -send (8) null<1>:d r20 0x5 0x40A8021:ud - - - -// FileName: DNDI_Enc_Stats_Save.asm -// Author: Vivek Kumar -// Description: Saves Encoder Statistics data to statistics surface in case of DI enabled (for 16x4 block) - -// Write encoder statistics to memory -//Currently enable this only on Gen6 validation -mov (8) mudMSGHDR_ENC_STATS(1)<1> 0x0:ud // Init payload MRF -mov (8) mudMSGHDR_ENC_STATS(0)<1> r0.0<8;8,1>:ud // message header - -shr (1) mudMSGHDR_ENC_STATS(0,0)<1> r9.0<0;1,0>:w 1:w { NoDDClr } //enable the flag after testing on si { NoDDClr } // X origin / 2 -mul (1) acc0.1<1>:ud r9.1<0;1,0>:w 3:w // Y origin * 3 -shr (1) mudMSGHDR_ENC_STATS(0,1)<1> acc0.1<0;1,0>:ud 2:w { NoDDClr, NoDDChk } //enable the flag after testing on si { NoDDClr, NoDDChk } // Y origin * 3/4 -mov (1) mudMSGHDR_ENC_STATS(0,2)<1> 0x20007:ud { NoDDChk } //enable the flag after testing on si { NoDDChk } // block width and height (8x3) -add (2) mudMSGHDR_ENC_STATS(0,0)<1> mudMSGHDR_ENC_STATS(0,0)<2;2,1> r1.12<2;2,1>:uw // Add pitch to X,Y origin - - - //Data block for Encoder Statistics - //---------------------------------------------------- - //| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Bytes - //---------------------------------------------------- - //| BNE | MCNT | FCNT | TCNT | X | X | X | X | - //---------------------------------------------------- - //| DcTpT | SVCM | DcBpT | DcTpB | - //---------------------------------------------------- - //| SHCM | STAD | DcTcB | DcBpB | - //---------------------------------------------------- - mov (1) mudMSGHDR_ENC_STATS(1,0)<1> udDNDI_RESP(9,1)<0;1,0> { NoDDClr } // Move encoder statistics to MRF - mov (2) mudMSGHDR_ENC_STATS(1,3)<2> udDNDI_RESP(9,3)<2;2,1> { NoDDClr, NoDDChk } // Move encoder statistics to MRF - mov (2) mudMSGHDR_ENC_STATS(1,2)<2> udDNDI_RESP(9,5)<2;2,1> { NoDDChk } // Move encoder statistics to MRF - - -send (8) null<1>:d r24 0x5 0x40A8021:ud - - - -// FileName: DI_Save_PA_16x4.asm -// Author: Vivek Kumar -// Description: Save two 16x4 blocks of DI output in Packed format - - -add (4) a0.4<1>:uw r2.28<4;4,1>:ub 608:w // Initial Y,U,V offset in YUV422 block; it starts at m20 - -mov (8) r27.0<1>:ud r0.0<8;8,1>:ud -shl (1) r27.0<1>:d r9.0<0;1,0>:w 1:w { NoDDClr } // H. block origin need to be doubled -mov (1) r27.1<1>:d r9.1<0;1,0>:w { NoDDClr, NoDDChk } // Block origin -mov (1) r27.2<1>:ud 0x3001F:ud { NoDDChk } // Block width and height (32x8) - -//prepare the message headers -mov (8) r18.0<1>:ud r27<8;8,1>:ud -mov (8) r23.0<1>:ud r27<8;8,1>:ud - -// Pack 2nd field Y - mov (16) r[a0.4, 0]<2> ubDNDI_RESP(0,0) { NoDDClr } - mov (16) r[a0.4, 32]<2> ubDNDI_RESP(0,16) { NoDDClr } - mov (16) r[a0.4, 64]<2> ubDNDI_RESP(0,32) { NoDDClr } - mov (16) r[a0.4, 96]<2> ubDNDI_RESP(0,48) { NoDDClr } -// Pack 2nd field U - mov (8) r[a0.5, 0]<4> ubDNDI_RESP(2,1)<16;8,2> { NoDDClr, NoDDChk } //U pixels - mov (8) r[a0.5, 32]<4> ubDNDI_RESP(2,17)<16;8,2> { NoDDClr, NoDDChk } //U pixels - mov (8) r[a0.5, 64]<4> ubDNDI_RESP(2,33)<16;8,2> { NoDDClr, NoDDChk } //U pixels - mov (8) r[a0.5, 96]<4> ubDNDI_RESP(2,49)<16;8,2> { NoDDClr, NoDDChk } //U pixels -// Pack 2nd field V - mov (8) r[a0.6, 0]<4> ubDNDI_RESP(2,0)<16;8,2> { NoDDChk } //Vpixels - mov (8) r[a0.6, 32]<4> ubDNDI_RESP(2,16)<16;8,2> { NoDDChk } //Vpixels - mov (8) r[a0.6, 64]<4> ubDNDI_RESP(2,32)<16;8,2> { NoDDChk } //Vpixels - mov (8) r[a0.6, 96]<4> ubDNDI_RESP(2,48)<16;8,2> { NoDDChk } //Vpixels - -// Pack 1st field Y - mov (16) r[a0.4, 160]<2> ubDNDI_RESP(4,0) { NoDDClr } - mov (16) r[a0.4, 192]<2> ubDNDI_RESP(4,16) { NoDDClr } - mov (16) r[a0.4, 224]<2> ubDNDI_RESP(4,32) { NoDDClr } - mov (16) r[a0.4, 256]<2> ubDNDI_RESP(4,48) { NoDDClr } -// Pack 1st field U - mov (8) r[a0.5, 160]<4> ubDNDI_RESP(6,1)<16;8,2> { NoDDClr, NoDDChk } //U pixels - mov (8) r[a0.5, 192]<4> ubDNDI_RESP(6,17)<16;8,2> { NoDDClr, NoDDChk } //U pixels - mov (8) r[a0.5, 224]<4> ubDNDI_RESP(6,33)<16;8,2> { NoDDClr, NoDDChk } //U pixels - mov (8) r[a0.5, 256]<4> ubDNDI_RESP(6,49)<16;8,2> { NoDDClr, NoDDChk } //U pixels -// Pack 1st field V - mov (8) r[a0.6, 160]<4> ubDNDI_RESP(6,0)<16;8,2> { NoDDChk } //Vpixels - mov (8) r[a0.6, 192]<4> ubDNDI_RESP(6,16)<16;8,2> { NoDDChk } //Vpixels - mov (8) r[a0.6, 224]<4> ubDNDI_RESP(6,32)<16;8,2> { NoDDChk } //Vpixels - mov (8) r[a0.6, 256]<4> ubDNDI_RESP(6,48)<16;8,2> { NoDDChk } //Vpixels - -//save the previous frame -send (8) null<1>:d r18.0 0x5 0xA0A801B:ud - -//save the current frame -send (8) null<1>:d r23.0 0x5 0xA0A801E:ud - - - -//End of Thread message - -mov (8) r127<1>:ud r0.0<8;8,1>:ud - send (1) null<1>:d r127 0x27 0x02000010 - - -.end_code -.end_kernel |