summaryrefslogtreecommitdiff
path: root/man/systemctl.xml
AgeCommit message (Collapse)AuthorFilesLines
2015-07-02man: information about available propertiesZbigniew Jędrzejewski-Szmek1-5/+23
https://bugzilla.redhat.com/show_bug.cgi?id=1144496
2015-06-29man: Remove instances of pseudo-English "resp."Andrew Eikum1-3/+3
Me again :) Just noticed one of these in a manpage and did another pass to clean them up. See 16dad32e437fdf2ffca03cc60a083d84bd31886f for explanation, though the link needs updating: <http://transblawg.eu/2004/02/26/resp-and-other-non-existent-english-wordsnicht-existente-englische-worter/>
2015-06-03systemctl: Use /usr/bin/editor if availableMichael Biebl1-0/+1
If the EDITOR environment variable is not set, the Debian policy recommends to use the /usr/bin/editor program as default editor. This file is managed via the dpkg alternatives mechanism and typically used in Debian/Ubuntu and derivatives to configure the default editor. See section 11.4 of the Debian policy [1]. Therefor prefer /usr/bin/editor over specific editors if available. [1] https://www.debian.org/doc/debian-policy/ch-customized-programs.html
2015-05-28man: use configured path for mount and umount binaries in manpagesFilipe Brandenburger1-2/+2
Export the MOUNT_PATH and UMOUNT_PATH variables as XML entities and use them in the systemctl.1 manpage instead of hardcoding the path in /usr/bin. Tested: - Ran ./configure ac_cv_path_MOUNT_PATH=/bin/mount (same for umount) and rebuilt the manpages, confirmed that the correct path was in man/systemctl.1 - Rebuilt man/systemd.directives.xml and the man pages derived from it, confirmed that the correct paths were there as well.
2015-05-28man: generate configured paths in manpagesFilipe Brandenburger1-1/+4
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
2015-05-18Use "new" --job-mode= option in more placesZbigniew Jędrzejewski-Szmek1-4/+4
--irreversible/--ignore-dependencies/--fail are deprececated since 4dc5b821ae737914499119e29811fc3346e3d97c. Also add shell completions for --jobs-mode.
2015-05-15systemctl: introduce --now for enable, disable and maskJan Synacek1-9/+24
https://bugs.freedesktop.org/show_bug.cgi?id=42940
2015-05-11treewide: Correct typos and spell plural of bus consistentTorstein Husebø1-1/+1
2015-04-28run: by default, wait until the transient unit finished start-upLennart Poettering1-2/+2
Make this blocking behaviour optional with --no-block, similar to systemctl's switch of this name.
2015-04-07logind,systemctl: add reboot to EFI firmware supportJan Janssen1-0/+12
2015-03-13man: fix name of systemd.resource-control(5)Zbigniew Jędrzejewski-Szmek1-1/+1
2015-03-13man: fix a bunch of linksZbigniew Jędrzejewski-Szmek1-3/+3
All hail linkchecker!
2015-02-10man: boilerplate unificationZbigniew Jędrzejewski-Szmek1-15/+15
2015-02-10man: fix reference to glob manpageZbigniew Jędrzejewski-Szmek1-3/+3
2015-02-10man: add systemd.generator(7)Zbigniew Jędrzejewski-Szmek1-6/+11
This is largely based on http://www.freedesktop.org/wiki/Software/systemd/Generators/, and obsoletes that page. It seems that we do a much better job of keeping man pages up-to-date compared to wiki pages. Man pages are also easier to find for users. https://bugs.freedesktop.org/show_bug.cgi?id=89048
2015-01-19man: use one description of --no-legendZbigniew Jędrzejewski-Szmek1-10/+2
2015-01-19systemctl: fix import-environment description, trim help to 80 colsZbigniew Jędrzejewski-Szmek1-1/+4
2015-01-08man: remove references to systemadm from systemctl man pageLennart Poettering1-1/+1
The tool is badly maintained and we shouldn't refence such old cruft.
2015-01-08man: bring systemctl man page and --help text into the same orderLennart Poettering1-100/+107
2014-12-30man: Fix spellingSusant Sahani1-1/+1
2014-11-29systemctl: add edit verbRonny Chevalier1-3/+61
It helps editing units by either creating a drop-in file, like /etc/systemd/system/my.service.d/override.conf, or by copying the original unit from /usr/lib/systemd/ to /etc/systemd/ if the --full option is specified. It invokes an editor on temporary files related to the unit files and if the editor exited successfully, then it renames the temporary files to their original names (e.g. my.service or override.conf) and daemon-reload is invoked. If the temporary file is empty the modification is canceled. See https://bugzilla.redhat.com/show_bug.cgi?id=906824
2014-11-29man: update description of default extension for isolateChris Atkinson1-3/+5
2014-11-23man: reword list-dependencies descriptionZbigniew Jędrzejewski-Szmek1-18/+44
The previous version was a bit too vague. It is better to simply list all dependency types that are followed. Previous version also made an emphasis on dependencies introduced by configuration. But this command (or systemd) don't care about this distinction between configured and automatically added dependencies at all. This distinctionis removed from the main description, and an explanatory paragraph is added to remind the user that all dependencies are shown, no matter where they come from.
2014-11-21man: add emacs header to get correct indention in nxml-mode for the manpage ↵Lennart Poettering1-1/+1
XML files that use 2ch indenting In the long run we really should figure out if we want to stick with 8ch or 2ch indenting, and not continue with half-and-half. For now, just make emacs aware of the files that use 2ch indenting.
2014-11-10man: improve documentation for "indirect" unit file state a bitLennart Poettering1-6/+6
Also, correct mentions of "units" instead of "unit files" in the table, and terminate all sentences with a full stop.
2014-11-10shared/install: when unit contains only Also=, report 'indirect'Jan Synacek1-0/+5
If a unit contains only Also=, with no Alias= or WantedBy=, it shouldn't be reported as static. New 'indirect' status shall be introduced. https://bugzilla.redhat.com/show_bug.cgi?id=864298
2014-11-10man: don't refer to undocumented option '--failed'Michal Schmidt1-2/+2
2014-11-10man: don't document systemctl --failedLennart Poettering1-11/+8
This effectively reverts 599b6322f19ec619ddc294d0e7880b669040cf66, which in turn partially reverted 4dc5b821ae737914499119e29811fc3346e3d97c. The --failed switch is not documented on purpose, since it is redundant due to --state=failed, which it predates. Due to that it's not documented in --help either. We generally try to avoid redundant interfaces, but if we need to keep them for compatibility we do so, however remove them from documentation to ensure they are not used in future. The man page is now changed to include a comment about the fact that --failed is not documented on purpose. Also, explicitly mention --state=failed as example for --state.
2014-11-07man: document --failedZbigniew Jędrzejewski-Szmek1-0/+9
https://bugs.debian.org/767267
2014-10-28man: minor corrections on how the overall system states are actually definedLennart Poettering1-6/+6
2014-10-27man: add table of manager statesZbigniew Jędrzejewski-Szmek1-7/+56
2014-10-08man/systemctl: document enable on masked unitsJan Synacek1-2/+5
2014-10-08systemctl: add add-wants and add-requires verbsLukas Nykryn1-0/+19
2014-09-04man: make it more clear that the concepts systemctl(1) manage are introduced ↵Lennart Poettering1-3/+5
in systemd(1) Based on a suggestion of Ken Coar.
2014-08-20man: fix typosRonny Chevalier1-1/+1
2014-08-15man: drop references to removed and obsolete 'systemctl load' commandLennart Poettering1-4/+2
Notes: Backport: documentation
2014-07-23docs: remove repeating words from man/*xmlKarel Zak1-1/+1
2014-07-07man: add a mapping for external manpagesZbigniew Jędrzejewski-Szmek1-1/+1
It is annoying when we have dead links on fd.o. Add project='man-pages|die-net|archlinux' to <citerefentry>-ies. In generated html, add external links to http://man7.org/linux/man-pages/man, http://linux.die.net/man/, https://www.archlinux.org/. By default, pages in sections 2 and 4 go to man7, since Michael Kerrisk is the autorative source on kernel related stuff. The rest of links goes to linux.die.net, because they have the manpages. Except for the pacman stuff, since it seems to be only available from archlinux.org. Poor gummiboot gets no link, because gummitboot(8) ain't to be found on the net. According to common wisdom, that would mean that it does not exist. But I have seen Kay using it, so I know it does, and deserves to be found. Can somebody be nice and put it up somewhere?
2014-06-28doc: grammatical correctionsJan Engelhardt1-2/+2
2014-06-25systemctl: add new "is-system-running" command to check whether system is ↵Lennart Poettering1-0/+17
fully up https://bugs.freedesktop.org/show_bug.cgi?id=66926
2014-06-17install: beef up preset logic to limit to only enable or only disable, and ↵Lennart Poettering1-4/+37
do all-unit preset operations The new "systemctl preset-all" command may now be used to put all installed units back into the enable/disable state the vendor/admin encoded in preset files. Also, introduce "systemctl --preset-mode=enable-only" and "systemctl --preset-mode=disable-only" to only apply the enable or only the disable operations of a "systemctl preset" or "systemctl preset-all" operation. "systemctl preset-all" implements this RFE: https://bugzilla.redhat.com/show_bug.cgi?id=630174
2014-06-09man: clarify the effect of replace-irreversibly on future conflicting jobsDavid Strauss1-2/+4
Notes: Backport: documentation
2014-05-15Fix typos in systemctl manpageEelco Dolstra1-3/+3
Notes: Backport: documentation
2014-05-07doc: comma placement corrections and word orderJan Engelhardt1-5/+5
Set commas where there should be some. Some improvements to word order.
2014-05-07doc: corrections to words and formsJan Engelhardt1-1/+1
This patch exchange words which are inappropriate for a situation, deletes duplicated words, and adds particles where needed.
2014-03-25systemctl: add more verbose explanation of --kill-who and what control/main ↵Lennart Poettering1-5/+30
processes are
2014-03-25systemctl: --kill-mode is long long gone, don't mention it in the man pageLennart Poettering1-3/+2
Notes: Backport: documentation
2014-03-17man: improve wording of systemctl's --after/--beforeJason St. John1-3/+18
Commit 4a77ca7 was an attempt at fixing the wording of --after and --before, but the new wording was unclear. Split the combined --after/--before section into a separate section for each, explicitly state what each option does, and add information about how these lists are generated. Reported-by: Andrey Borzenkov <arvidjaar@gmail.com> Reported-by: Lennart Poettering <lennart@poettering.net> Notes: Backport: documentation
2014-03-17systemctl: introduce -r switch to show units running in local containers in ↵Lennart Poettering1-0/+12
addition to the host
2014-03-12systemctl: when "systemctl status" is called without arguments show a short ↵Lennart Poettering1-4/+5
overall system state Previously "systemctl status" without argument would print the status of all loaded units. This has now been moved to "systemctl status -a".
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-21 22:23:45 +0000