| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
nir_mask_shift_or is now defined in nir_format_convert.h so we can
delete the copy in blorp_blit.c.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
|
|
This commit makes blorp capable of swizzling anything even on hardware
that doesn't support texture swizzle.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
|
|
The previous version was sort-of strapped on in that it just adjusted
the blit rectangle and trusted in the fact that we would use texelFetch
and round to the nearest integer to ensure that the component positions
matched. This new version, while slightly more complicated, is more
accurate because all three components end up with exactly the same
dst_pos and so they will get interpolated and sampled at the same
texture coordinate. This makes the workaround suitable for using with
scaled blits.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
|
|
vulkan/genX_blorp_exec.c:69:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from vulkan/genX_blorp_exec.c:35:0:
./blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
blorp_emit_memcpy(struct blorp_batch *batch,
^~~~~~~~~~~~~~~~~
genX_blorp_exec.c:99:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from genX_blorp_exec.c:33:0:
../../../../../src/intel/blorp/blorp_genX_exec.h:1249:1: warning: ‘blorp_emit_memcpy’ defined but not used [-Wunused-function]
blorp_emit_memcpy(struct blorp_batch *batch,
^~~~~~~~~~~~~~~~~
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
|
|
We always want to update the fast clear color during a fast clear on
i965. On anv, we are doing that before a resolve, but by adding support
to blorp, we can do a similar thing and update it during a fast clear
instead.
The goal is to remove some code from anv that does such update, and
centralize everything in blorp, hopefully removing a lot of code
duplication. It also allows us to have a similar behavior on gen < 9 and
gen >= 10.
v5: s/we/we are/ (Jordan)
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
We only need to copy the clear color from the state buffer to the
inlined surface state when doing a resolve.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
On gen10+, if surface->clear_color_addr is present, use it directly
intead of copying it to the surface state.
v4: Remove redundant #if clause for GEN <= 10 (Jason)
v5: Move flush after the reloc, and keep lower bits (Topi).
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
The size of the clear color struct (expected by the hardware) is 8
dwords (isl_dev.ss.clear_value_state_size here). But we still need to
track the size of the clear color, used when memcopying it to/from the
state buffer. For that we keep isl_dev.ss.clear_value_size.
v4:
- Add struct to gen11 too (Jason, Jordan)
- Add field for Converted Clear Color to gen11 (Jason)
- Add clear_color_state_offset to differentiate from
clear_value_offset.
- Fix all the places where clear_value_size was used.
v5 (Jason):
- Split genxml changes to another commit.
- Remove unnecessary gen checks.
- Bring back missing offset increment to init_fast_clear_color().
v6 (Jason):
- On init_fast_clear_color, change:
addr.offset += 4 => sdi.Address.offset += i * 4
- Use GEN_GEN instead of GEN_VERSIONx10.
[jordan.l.justen@intel.com: isl_device_init changes]
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
|
|
This is a legitimate warning: if anv's blorp_alloc_binding_table() throws
an error from anv_cmd_buffer_alloc_blorp_binding_table(), we silently
continue to use this undefined value. The rest of this code doesn't seem
very allocation-error-proof, though, either.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
|
|
[84/227] Compiling C object 'src/intel/vulkan/libanv_gen110@sta/genX_blorp_exec.c.o'.
../src/intel/vulkan/genX_blorp_exec.c:68:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
|
|
We want people to be using ISL_FORMAT_*, rather than the genxml format
enumerations. This patch drops 10 separate copies, and drops a bunch
of ugly casting.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Minor changes for rebase]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
|
|
Split out the device info so isl doesn't depend on intel/common. Now
it will depend on the new intel/dev device info lib.
This will allow the decoder in intel/common to use isl, allowing us to
apply Ken's patch that removes the genxml duplication of surface
formats.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
|
|
Reduces my build from 2023 warnings to 1960 warnings by silencing 63
instances of things like
In file included from ../../SOURCE/master/src/mesa/drivers/dri/i965/genX_blorp_exec.c:33:0:
../../SOURCE/master/src/intel/blorp/blorp_genX_exec.h: In function ‘blorp_emit_cc_viewport’:
../../SOURCE/master/src/intel/blorp/blorp_genX_exec.h:500:51: warning: unused parameter ‘params’ [-Wunused-parameter]
const struct blorp_params *params)
^~~~~~
../../SOURCE/master/src/intel/blorp/blorp_genX_exec.h: In function ‘blorp_emit_sampler_state’:
../../SOURCE/master/src/intel/blorp/blorp_genX_exec.h:524:53: warning: unused parameter ‘params’ [-Wunused-parameter]
const struct blorp_params *params)
^~~~~~
In file included from ../../SOURCE/master/src/mesa/drivers/dri/i965/genX_blorp_exec.c:36:0:
../../SOURCE/master/src/mesa/drivers/dri/i965/gen4_blorp_exec.h: In function ‘blorp_emit_vs_state’:
../../SOURCE/master/src/mesa/drivers/dri/i965/gen4_blorp_exec.h:50:48: warning: unused parameter ‘params’ [-Wunused-parameter]
const struct blorp_params *params)
^~~~~~
../../SOURCE/master/src/mesa/drivers/dri/i965/genX_blorp_exec.c: In function ‘blorp_flush_range’:
../../SOURCE/master/src/mesa/drivers/dri/i965/genX_blorp_exec.c:197:39: warning: unused parameter ‘batch’ [-Wunused-parameter]
blorp_flush_range(struct blorp_batch *batch, void *start, size_t size)
^~~~~
../../SOURCE/master/src/mesa/drivers/dri/i965/genX_blorp_exec.c:197:52: warning: unused parameter ‘start’ [-Wunused-parameter]
blorp_flush_range(struct blorp_batch *batch, void *start, size_t size)
^~~~~
../../SOURCE/master/src/mesa/drivers/dri/i965/genX_blorp_exec.c:197:66: warning: unused parameter ‘size’ [-Wunused-parameter]
blorp_flush_range(struct blorp_batch *batch, void *start, size_t size)
^~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
|
|
This is a bit complicated because we have to get the indirect clear
color in there somehow. In order to not do any more work in the shader
than needed, we set it up as it's own vertex binding which points
directly at the clear color address specified by the client.
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
|
|
There are enough #ifs in there that it's kind-of pointless to duplicate
it for each buffer.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
|
|
This is similar to blorp_gen8_hiz_clear_attachments except that it takes
actual images instead of trusting in the already set depth state.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
|
|
SIMD4x2 dispatch mode has been removed in GEN11. We're not using
it anyways in Mesa. Adding few asserts to make it explicit.
Use GEN_GEN macro in place of devinfo->gen (Ken)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
StateCacheInvalidation is required on all gen7+ platforms. We
don't need to update this check for every new gen h/w unless
this requirement is changed. So, dropping the check for latest
gen h/w.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
|
|
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
|
|
This pass performs an "ambiguate" operation on a CCS-compressed surface
by manually writing zeros into the CCS. On gen8+, ISL gives us a fairly
detailed notion of how the CCS is laid out so this is fairly simple to
do. On gen7, the CCS tiling is quite crazy but that isn't an issue
because we can only do CCS on single-slice images so we can just blast
over the entire CCS buffer if we want to.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
|
|
We have to start render targets at binding table index 0 in order to use
headerless FB write messages, and in fact already assume this in a bunch
of places in the code. Let's finish that off, and not bother storing 0
in a struct to pretend to add it in a few places.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
|
|
This creates two new internal dependencies, idep_nir_headers and
idep_nir. The former encapsulates the generation of nir_opcodes.h and
nir_builder_opcodes.h and adding src/compiler/nir as an include path.
This ensures that any target that needs nir headers will have the
includes and that the generated headers will be generated before the
target is build. The second, idep_nir, includes the first and
additionally links to libnir.
This is intended to make it easier to avoid race conditions in the build
when using nir, since the number of consumers for libnir and it's
headers are quite high.
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
|
|
Older OpenGL defines two equations for converting from signed-normalized
to floating point data. These are:
f = (2c + 1)/(2^b - 1) (equation 2.2)
f = max{c/2^(b-1) - 1), -1.0} (equation 2.3)
Both OpenGL 4.2+ and OpenGL ES 3.0+ mandate that equation 2.3 is to be
used in all scenarios, and remove equation 2.2. DirectX uses equation
2.3 as well. Intel hardware only supports equation 2.3, so Gen7.5+
systems that use the vertex fetcher hardware to do the conversions
always get formula 2.3.
This can make a big difference for 10-10-10-2 formats - the 2-bit value
can represent 0 with equation 2.3, and cannot with equation 2.2.
Ivybridge and older were using equation 2.2 for OpenGL, and 2.3 for ES.
Now that Ivybridge supports OpenGL 4.2, this is wrong - we need to use
the new rules, at least in core profile. That would leave Gen4-6 doing
something different than all other hardware, which seems...lame.
With context version promotion, applications that requested a pre-4.2
context may get promoted to 4.2, and thus get the new rules. Zero cases
have been reported of this being a problem. However, we've received a
report that following the old rules breaks expectations. SuperTuxKart
apparently renders the cars red when following equation 2.2, and works
correctly when following equation 2.3:
https://github.com/supertuxkart/stk-code/issues/2885#issuecomment-353858405
So, this patch deletes the legacy equation 2.2 support entirely, making
all hardware and APIs consistently use the new equation 2.3 rules.
If we ever find an application that truly requires the old formula, then
we'd likely want that application to work on modern hardware, too. We'd
likely restore this support as a driconf option. Until then, drop it.
This commit will regress Piglit's draw-vertices-2101010 test on
pre-Haswell without the corresponding Piglit patch to accept either
formula (commit 35daaa1695ea01eb85bc02f9be9b6ebd1a7113a1):
draw-vertices-2101010: Accept either SNORM conversion formula.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
|
|
Fix incomplete check of input params in blorp_surf_convert_to_uncompressed()
which can lead to NULL pointer dereferencing.
Fixes: 5ae8043fed2 ("intel/blorp: Add an entrypoint for doing
bit-for-bit copies")
Fixes: f395d0abc83 ("intel/blorp: Internally expose
surf_convert_to_uncompressed")
Reviewed-by: Emil Velikov <emli.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
|
|
The only reason why we needed that version was because the Vulkan driver
needed to be able to create the surface states so it could handle
indirect clear colors. Now that blorp handles them natively, there's no
need for the extra entrypoint.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
|
|
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
|
|
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
|
|
This doesn't go all the way of avoiding the txf_ms if it's fast-cleared,
however it does at least make us only do it once. This should improve
performance of MSAA resolves in the presence of lots of clear color.
Without the patch, enabling fast-clears in the multisampling Sascha demo
drops the framerate by about 10%. With this patch, enabling fast-clears
increases the demo's framerate by 25%.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
|
|
That name is already taken by one of the helpers in blorp_nir_builder.h
and, while we haven't moved the guts of blorp_blit.c there yet, we'd
like to start using some things from that header.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
|
|
This makes our MOCS settings significantly more flexible.
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
Cc: "17.3" <mesa-stable@lists.freedesktop.org>
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
It's a neat idea, and still useful in some cases, but the intel common
code is used by i965 and anvil only, this is a little clearer.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
The caller can now use brw_stage_prog_data::program_size which is set
by the brw_compile_* functions.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
|
|
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
|
|
It's redundant with nir_shader::info::stage.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
|
|
This moves us away to the array of pointers model and onto a model where
each param is represented by a generic uint32_t handle. We reserve 2^16
of these handles for builtins that get generated by somewhere inside the
compiler and have well-defined meanings. Generic params have handles
whose meanings are defined by the driver.
The primary downside to this new approach is that it moves a little bit
of the work that we would normally do at compile time to draw time. On
my laptop this hurts OglBatch6 by no more than 1% and doesn't seem to
have any measurable affect on OglBatch7. So, while this may come back
to bite us, it doesn't look too bad.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
This allows building and installing the Intel "anv" Vulkan driver using
meson and ninja, the driver has been tested against the CTS and has
seems to pass the same series of tests (they both segfault when the CTS
tries to run wayland wsi tests).
There are still a mess of TODO, XXX, and FIXME comments in here. Those
are mostly for meson bugs I'm trying to fix, or for additional things to
implement for other drivers/features.
I have configured all intermediate libraries and optional tools to not
build by default, meaning they will only be built if they're pulled in
as a dependency of a target that will actually be installed) this allows
us to avoid massive if chains, while ensuring that only the bits that
need to be built are.
v2: - enable anv, x11, and wayland by default
- add configure option to disable valgrind
v3: - fix typo in meson_options (Nicholas)
v4: - Remove dead code (Eric)
- Remove change to generator that was from v0 (Eric)
- replace if chain with loop (Eric)
- Fix typos (Eric)
- define HAVE_DLOPEN for both libdl and builtin dl cases (Eric)
v5: - rebase on util string buffer implementation
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net> (v4)
|
|
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
|
|
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
|
|
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
|
|
Vulkan needs to be able to clear any texture you can create. We want to
add support for VK_FORMAT_R8_SRGB and we need to use L8_UNORM_SRGB to do
that so we need to be able to clear it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
Gen4-6 can only handle surfaces up to 8192. Only Gen7+ can do 16384.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
|
|
I want to be able to copy between buffer objects using BLORP in the i965
driver. Anvil already had code to do this, in a reasonably efficient
manner - first using large bpp copies, then smaller bpp copies.
This patch moves that logic into BLORP as blorp_buffer_copy(), so we
can use it in both drivers.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
|
|
Fixes warnings like
warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
.SourceElementFormat = ISL_FORMAT_R32_UINT,
^~~~~~~~~~~~~~~~~~~
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
|
|
The PRM SKL-Vol 2b-05.16 says:
"Within a VERTEX_ELEMENT_STATE structure, if a Component Control
field is set to something other than VFCOMP_STORE_SRC, no
higher-numbered Component Control fields may be set to
VFCOMP_STORE_SRC. In other words, only trailing components can be set
to something other than VFCOMP_STORE_SRC."
Since we set the component 1 to VFCOMP_STORE_0 on gen8+, and
VFCOMP_STORE_IID on gen5+, and we are not using components 2 and 3,
let's also set them to VFCOMP_STORE_0.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
|
|
v2 (Jason): Adjust directly in surf_fake_rgb_with_red()
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101910
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
|
|
The kernel only cares about whether the object is to be written to or
not, only reduces (reloc.read_domains, reloc.write_domain) down to just
!!reloc.write_domain. When we use NO_RELOC, the kernel doesn't even read
those relocs and instead userspace has to pass that information in the
execobject.flags. We can simplify our reloc api by also removing the
unused read/write domains and only pass the resultant flags.
The caveat to the above are when we need to make the kernel aware that
certain objects need to take into account different work arounds.
Previously, this was done using the magic (INSTRUCTION, INSTRUCTION)
reloc domains. NO_RELOC requires this to be passed in the execobject
flags as well, and now we push that up the callstack.
The API is more compact, more expressive of what happens underneath, but
unfortunately requires more knowledge of the system at the point of use.
Conversely it also means that knowledge is specific and not generally
applied and so not overused.
text data bss dec hex filename
8502991 356912 424944 9284847 8dacef lib/i965_dri.so (before)
8500455 356912 424944 9282311 8da307 lib/i965_dri.so (after)
v2: (by Ken) Rebase.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
|
|
We already have a helper for doing this in BLORP, this just moves the
logic into ISL where we can share it with other components.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
|
