diff options
Diffstat (limited to 'svx/source/sdr/contact/viewobjectcontactofsdrole2obj.cxx')
| -rw-r--r-- | svx/source/sdr/contact/viewobjectcontactofsdrole2obj.cxx | 164 |
1 files changed, 40 insertions, 124 deletions
diff --git a/svx/source/sdr/contact/viewobjectcontactofsdrole2obj.cxx b/svx/source/sdr/contact/viewobjectcontactofsdrole2obj.cxx index 674c79a3aa68..cb4edcb0f98a 100644 --- a/svx/source/sdr/contact/viewobjectcontactofsdrole2obj.cxx +++ b/svx/source/sdr/contact/viewobjectcontactofsdrole2obj.cxx @@ -1,31 +1,21 @@ /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ -/************************************************************************* +/* + * This file is part of the LibreOffice project. * - * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. * - * Copyright 2000, 2010 Oracle and/or its affiliates. + * This file incorporates work covered by the following license notice: * - * OpenOffice.org - a multi-platform office productivity suite - * - * This file is part of OpenOffice.org. - * - * OpenOffice.org is free software: you can redistribute it and/or modify - * it under the terms of the GNU Lesser General Public License version 3 - * only, as published by the Free Software Foundation. - * - * OpenOffice.org is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU Lesser General Public License version 3 for more details - * (a copy is included in the LICENSE file that accompanied this code). - * - * You should have received a copy of the GNU Lesser General Public License - * version 3 along with OpenOffice.org. If not, see - * <http://www.openoffice.org/license.html> - * for a copy of the LGPLv3 License. - * - ************************************************************************/ - + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ #include <svx/sdr/contact/viewobjectcontactofsdrole2obj.hxx> #include <svx/sdr/contact/viewobjectcontactofsdrobj.hxx> @@ -33,12 +23,12 @@ #include <svx/svdoole2.hxx> #include <svx/sdr/contact/objectcontact.hxx> #include <svx/svdview.hxx> -#include <drawinglayer/primitive2d/chartprimitive2d.hxx> #include <drawinglayer/primitive2d/polypolygonprimitive2d.hxx> #include <basegfx/polygon/b2dpolygontools.hxx> #include <com/sun/star/embed/EmbedMisc.hpp> #include <com/sun/star/embed/EmbedStates.hpp> #include <basegfx/polygon/b2dpolygon.hxx> +#include <basegfx/matrix/b2dhommatrix.hxx> ////////////////////////////////////////////////////////////////////////////// @@ -73,7 +63,6 @@ namespace sdr const bool bIsOutplaceActive(nState == embed::EmbedStates::ACTIVE); const bool bIsInplaceActive((nState == embed::EmbedStates::INPLACE_ACTIVE) || (nState == embed::EmbedStates::UI_ACTIVE)); - const bool bIsChart(rSdrOle2.IsChart()); bool bDone(false); if(!bDone && bIsInplaceActive) @@ -88,122 +77,49 @@ namespace sdr if( !bDone ) { - const Rectangle& rObjectRectangle(rSdrOle2.GetGeoRect()); - const basegfx::B2DRange aObjectRange(rObjectRectangle.Left(), rObjectRectangle.Top(), rObjectRectangle.Right(), rObjectRectangle.Bottom()); - - // create object transform - basegfx::B2DHomMatrix aObjectTransform; - aObjectTransform.set(0, 0, aObjectRange.getWidth()); - aObjectTransform.set(1, 1, aObjectRange.getHeight()); - aObjectTransform.set(0, 2, aObjectRange.getMinX()); - aObjectTransform.set(1, 2, aObjectRange.getMinY()); - - if(bIsChart) + //old stuff that should be reworked { - //charts must be painted resolution dependent!! #i82893#, #i75867# - - // for chart, to not lose the current better quality visualisation which - // uses a direct paint, use a primtive wrapper for that exceptional case. The renderers - // will then ATM paint it to an OutputDevice directly. - // In later versions this should be replaced by getting the Primitive2DSequnce from - // the chart and using it. - // to be able to render something in non-VCL using renderers, the wrapper is a - // GroupPrimitive2D which automatically decomposes to the already created Metafile - // content. - // For being completely compatible, ATM Window and VDEV PrettyPrinting is suppressed. - // It works in the VCL renderers, though. So for activating again with VCL primitive - // renderers, change conditions here. - - // determine if embedding and PrettyPrinting shall be done at all - uno::Reference< frame::XModel > xChartModel; - bool bDoChartPrettyPrinting(true); - - // the original ChartPrettyPainter does not do it for Window - if(bDoChartPrettyPrinting && GetObjectContact().isOutputToWindow()) + //if no replacement image is available load the OLE object +// if(!rSdrOle2.GetGraphic()) //try to fetch the metafile - this can lead to the actual creation of the metafile what can be extremely expensive (e.g. for big charts)!!! #i101925# +// { +// // try to create embedded object +// rSdrOle2.GetObjRef(); //this loads the OLE object if it is not loaded already +// } + const svt::EmbeddedObjectRef& xObjRef = rSdrOle2.getEmbeddedObjectRef(); + if(xObjRef.is()) { - bDoChartPrettyPrinting = false; - } + const sal_Int64 nMiscStatus(xObjRef->getStatus(rSdrOle2.GetAspect())); - // the original ChartPrettyPainter does not do it for VDEV - if(bDoChartPrettyPrinting && GetObjectContact().isOutputToVirtualDevice()) - { - if(GetObjectContact().isOutputToPDFFile()) + // this hack (to change model data during PAINT argh(!)) should be reworked + if(!rSdrOle2.IsResizeProtect() && (nMiscStatus & embed::EmbedMisc::EMBED_NEVERRESIZE)) { - // #i97982# - // For PDF files, allow PrettyPrinting + const_cast< SdrOle2Obj* >(&rSdrOle2)->SetResizeProtect(true); } - else - { - bDoChartPrettyPrinting = false; - } - } - - // the chart model is needed. Check if it's available - if(bDoChartPrettyPrinting) - { - // get chart model - xChartModel = rSdrOle2.getXModel(); - if(!xChartModel.is()) + SdrPageView* pPageView = GetObjectContact().TryToGetSdrPageView(); + if(pPageView && (nMiscStatus & embed::EmbedMisc::MS_EMBED_ACTIVATEWHENVISIBLE)) { - bDoChartPrettyPrinting = false; + // connect plugin object + pPageView->GetView().DoConnect(const_cast< SdrOle2Obj* >(&rSdrOle2)); } } + }//end old stuff to rework - if(bDoChartPrettyPrinting) - { - // embed MetaFile data in a specialized Wrapper Primitive which holds also the ChartModel needed - // for PrettyPrinting - const drawinglayer::primitive2d::Primitive2DReference xReference(new drawinglayer::primitive2d::ChartPrimitive2D( - xChartModel, aObjectTransform, xRetval)); - xRetval = drawinglayer::primitive2d::Primitive2DSequence(&xReference, 1); - bDone = true; - } - } - - if( !bDone ) - { - //old stuff that should be reworked - { - //if no replacement image is available load the OLE object - if(!rSdrOle2.GetGraphic()) //try to fetch the metafile - this can lead to the actual creation of the metafile what can be extremely expensive (e.g. for big charts)!!! #i101925# - { - // try to create embedded object - rSdrOle2.GetObjRef(); //this loads the OLE object if it is not loaded already - } - const svt::EmbeddedObjectRef& xObjRef = rSdrOle2.getEmbeddedObjectRef(); - if(xObjRef.is()) - { - const sal_Int64 nMiscStatus(xObjRef->getStatus(rSdrOle2.GetAspect())); - - // this hack (to change model data during PAINT argh(!)) should be reworked - if(!rSdrOle2.IsResizeProtect() && (nMiscStatus & embed::EmbedMisc::EMBED_NEVERRESIZE)) - { - const_cast< SdrOle2Obj* >(&rSdrOle2)->SetResizeProtect(true); - } - - SdrPageView* pPageView = GetObjectContact().TryToGetSdrPageView(); - if(pPageView && (nMiscStatus & embed::EmbedMisc::MS_EMBED_ACTIVATEWHENVISIBLE)) - { - // connect plugin object - pPageView->GetView().DoConnect(const_cast< SdrOle2Obj* >(&rSdrOle2)); - } - } - }//end old stuff to rework - - // create OLE primitive stuff directly at VC with HC as parameter - const ViewContactOfSdrOle2Obj& rVC = static_cast< const ViewContactOfSdrOle2Obj& >(GetViewContact()); - xRetval = rVC.createPrimitive2DSequenceWithParameters(); - } + // create OLE primitive stuff directly at VC with HC as parameter + const ViewContactOfSdrOle2Obj& rVC = static_cast< const ViewContactOfSdrOle2Obj& >(GetViewContact()); + xRetval = rVC.createPrimitive2DSequenceWithParameters(); if(bIsOutplaceActive) { // do not shade when printing or PDF exporting if(!GetObjectContact().isOutputToPrinter() && !GetObjectContact().isOutputToRecordingMetaFile()) { + // get object transformation + const basegfx::B2DHomMatrix aObjectMatrix(static_cast< ViewContactOfSdrOle2Obj& >(GetViewContact()).createObjectTransform()); + // shade the representation if the object is activated outplace basegfx::B2DPolygon aObjectOutline(basegfx::tools::createUnitPolygon()); - aObjectOutline.transform(aObjectTransform); + aObjectOutline.transform(aObjectMatrix); // Use a FillHatchPrimitive2D with necessary attributes const drawinglayer::attribute::FillHatchAttribute aFillHatch( |