diff options
Diffstat (limited to 'registry/workben/regtest.cxx')
| -rw-r--r-- | registry/workben/regtest.cxx | 376 |
1 files changed, 376 insertions, 0 deletions
diff --git a/registry/workben/regtest.cxx b/registry/workben/regtest.cxx new file mode 100644 index 000000000000..a39f34fe2c80 --- /dev/null +++ b/registry/workben/regtest.cxx @@ -0,0 +1,376 @@ +/************************************************************************* + * + * $RCSfile: regtest.cxx,v $ + * + * $Revision: 1.1.1.1 $ + * + * last change: $Author: hr $ $Date: 2000-09-18 15:18:43 $ + * + * The Contents of this file are made available subject to the terms of + * either of the following licenses + * + * - GNU Lesser General Public License Version 2.1 + * - Sun Industry Standards Source License Version 1.1 + * + * Sun Microsystems Inc., October, 2000 + * + * GNU Lesser General Public License Version 2.1 + * ============================================= + * Copyright 2000 by Sun Microsystems, Inc. + * 901 San Antonio Road, Palo Alto, CA 94303, USA + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License version 2.1, as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Sun Industry Standards Source License Version 1.1 + * ================================================= + * The contents of this file are subject to the Sun Industry Standards + * Source License Version 1.1 (the "License"); You may not use this file + * except in compliance with the License. You may obtain a copy of the + * License at http://www.openoffice.org/license.html. + * + * Software provided under this License is provided on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, + * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, + * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. + * See the License for the specific provisions governing your rights and + * obligations concerning the Software. + * + * The Initial Developer of the Original Code is: Sun Microsystems, Inc. + * + * Copyright: 2000 by Sun Microsystems, Inc. + * + * All Rights Reserved. + * + * Contributor(s): _______________________________________ + * + * + ************************************************************************/ + +#include <iostream.h> +#include <stdio.h> + +#include "registry/registry.h" + +#ifndef _RTL_USTRING_HXX_ +#include <rtl/ustring.hxx> +#endif + +#ifndef _RTL_ALLOC_H_ +#include <rtl/alloc.h> +#endif + +using namespace rtl; + +#if (defined UNX) || (defined OS2) +int main( int argc, char * argv[] ) +#else +int _cdecl main( int argc, char * argv[] ) +#endif +{ + RegHandle hReg; + RegKeyHandle hRootKey, hKey1, hKey2, hKey3, hKey4, hKey5; + + cout << "\n Simple Registry Test !!! \n\n"; + + if (reg_createRegistry(OUString::createFromAscii("test4.rdb").pData, &hReg)) + cout << "\t0. creating registry \"test4.rdb\" failed\n"; + else + cout << "0. registry test4.rdb is created\n"; + + if (reg_openRootKey(hReg, &hRootKey)) + cout << "1. open root key \"test4.rdb\" failed\n"; + else + cout << "1. root key of \"test4.rdb\" is opened\n"; + + if (reg_createKey(hRootKey, OUString::createFromAscii("myFirstKey").pData, &hKey1)) + cout << "\t2. creating key \"myFirstKey\" failed\n"; + else + cout << "2. key \"myFirstKey\" is created\n"; + if (reg_createKey(hRootKey, OUString::createFromAscii("mySecondKey").pData, &hKey2)) + cout << "\t3. creating key \"mySecondKey\" failed\n"; + else + cout << "3. key \"mySecondKey\" is created\n"; + if (reg_createKey(hKey1, OUString::createFromAscii("myFirstSubKey").pData, &hKey3)) + cout << "\t4. creating subkey \"myFirstSubKey\" failed\n"; + else + cout << "4. subkey \"myFirstSubKey\" is created\n"; + if (reg_createKey(hKey1, OUString::createFromAscii("mySecondSubKey").pData, &hKey4)) + cout << "\t5. creating subkey \"mySecondSubKey\" failed\n"; + else + cout << "5. subkey \"mySecondSubKey\" is created\n"; + if (reg_createKey(hRootKey, OUString::createFromAscii("myThirdKey").pData, &hKey5)) + cout << "\t6. creating key \"myThirdKey\" is created\n\n"; + else + cout << "6. key \"myThirdKey\" is created\n\n"; + + + RegKeyHandle* phSubKeys; + sal_uInt32 nSubKeys; + if (reg_openSubKeys(hRootKey, OUString::createFromAscii("myFirstKey").pData, &phSubKeys, &nSubKeys)) + cout << "\t7. open subkeys of \"myfirstKey\" failed\n"; + else + cout << "7. open " << nSubKeys << "subkeys of \"myfirstKey\"\n"; + + OUString keyName; + if (reg_getKeyName(phSubKeys[0], &keyName.pData)) + cout << "\tname of subkey 1 = " << OUStringToOString(keyName, RTL_TEXTENCODING_ASCII_US).getStr() << "\n"; + if (reg_getKeyName(phSubKeys[1], &keyName.pData)) + cout << "\tname of subkey 2 = " << OUStringToOString(keyName, RTL_TEXTENCODING_ASCII_US).getStr() << "\n"; + + if (reg_closeSubKeys(phSubKeys, nSubKeys)) + cout << "\t8. close subkeys of \"myfirstKey\" failed\n\n"; + else + cout << "8. close " << nSubKeys << "subkeys of \"myfirstKey\"\n\n"; + + + char* Value="Mein erster Value"; + if (reg_setValue(hRootKey, OUString::createFromAscii("mySecondKey").pData, RG_VALUETYPE_STRING, Value, 18)) + cout << "\t9. setValue of key \"mySecondKey\" failed\n"; + else + cout << "9. setValue (string Value) of key \"mySecondKey\"\n"; + + RegValueType valueType; + sal_uInt32 valueSize; + sal_Char* readValue; + if (reg_getValueInfo(hRootKey, OUString::createFromAscii("mySecondKey").pData, &valueType, &valueSize)) + cout << "\t10. getValueInfo of key \"mySecondKey\" failed\n"; + else + cout << "10. getValueInfo of key \"mySecondKey\"\n"; + + readValue = (sal_Char*)rtl_allocateMemory(valueSize); + if (reg_getValue(hKey2, OUString().pData, readValue)) + cout << "\t11. getValue of key \"mySecondKey\" failed\n"; + else + { + cout << "11. getValue of key \"mySecondKey\"\n"; + + cout << "read Value,\n\tvalueType = " << (long)valueType + << "\n\tvalueSize = " << valueSize + << "\n\tvalue = " << readValue << "\n\n"; + } + rtl_freeMemory(readValue); + + if (reg_closeKey(hKey1) || + reg_closeKey(hKey3) || + reg_closeKey(hKey4)) + cout << "\t12. closing \"myFirstKey\" \"myfistSubKey\" \"mySecondSubKey\" failed\n"; + else + cout << "12. keys \"myFirstKey\" \"myfistSubKey\" \"mySecondSubKey\" are closed\n"; + + if (reg_deleteKey(hRootKey, OUString::createFromAscii("myFirstKey").pData)) + cout << "13.\t delete key \"myFirstKey\" failed\n"; + else + cout << "13. key \"myFirstKey\" is deleted\n"; + + if (reg_closeKey(hKey2)) + cout << "\t14. closing key \"mySecondKey\" failed\n"; + else + cout << "14. key \"mySecondKey\" is closed\n"; + + if (reg_openKey(hRootKey, OUString::createFromAscii("mySecondKey").pData, &hKey2)) + cout << "\n15. open key \"mySecondKey\" failed\n"; + else + cout << "15. key \"mySecondKey\" is opended\n"; + + if (reg_closeKey(hKey5)) + cout << "\t15. closing key \"myThirdSubKey\" failed\n"; + else + cout << "15. key \"myThirdSubKey\" is closed\n"; + if (reg_deleteKey(hRootKey, OUString::createFromAscii("myThirdKey").pData)) + cout << "\t16. delete key \"myThirdKey\" failed\n"; + else + cout << "16. key \"myThirdKey\" is deleted\n"; + + if (reg_openKey(hRootKey, OUString::createFromAscii("myThirdKey").pData, &hKey5)) + cout << "\t17. open key \"myThirdKey\" failed\n"; + else + cout << "17. key \"myThirdKey\" is opened\n"; + + cout << "\n close open keys\n\n"; + + if (reg_closeKey(hKey2)) + cout << "\t18. closing key \"mySecondKey\" failed\n"; + else + cout << "18. key \"mySecondKey\" is closed\n"; + + if (reg_closeKey(hRootKey)) + cout << "\t19. closing root key failed\n"; + else + cout << "19. root key is closed\n"; + + if (reg_closeRegistry(hReg)) + cout << "\t20. closing registry \"test4.rdb\" failed\n"; + else + cout << "20. registry \"test4.rdb\" is closed\n"; + + // Test loadkey + cout << "\nTest load key\n\n"; + + RegHandle hReg2; + RegKeyHandle hRootKey2, h2Key1, h2Key2, h2Key3, h2Key4, h2Key5; + + if (reg_createRegistry(OUString::createFromAscii("test5.rdb").pData, &hReg2)) + cout << "\t21. creating registry \"test5.rdb\" failed\n"; + else + cout << "21. registry \"test5.rdb\" is created\n"; + + if (reg_openRootKey(hReg2, &hRootKey2)) + cout << "\t22. open root key of \"test5.rdb\" failed\n"; + else + cout << "22. root key of \"test5.rdb\" is opened\n"; + + if (reg_createKey(hRootKey2, OUString::createFromAscii("reg2FirstKey").pData, &h2Key1)) + cout << "\t23. creating key \"reg2FirstKey\" failed\n"; + else + cout << "23. key \"reg2FirstKey\" is created\n"; + if (reg_createKey(hRootKey2, OUString::createFromAscii("reg2SecondKey").pData, &h2Key2)) + cout << "\t24. creating key \"reg2SecondKey\" failed\n"; + else + cout << "24. key \"reg2SecondKey\" is created\n"; + if (reg_createKey(h2Key1, OUString::createFromAscii("reg2FirstSubKey").pData, &h2Key3)) + cout << "\t25. creating key \"reg2FirstSubKey\" failed\n"; + else + cout << "25. key \"reg2FirstSubKey\" is created\n"; + if (reg_createKey(h2Key1, OUString::createFromAscii("reg2SecondSubKey").pData, &h2Key4)) + cout << "\26. creating key \"reg2SecondSubKey\" failed\n"; + else + cout << "26. key \"reg2SecondSubKey\" is created\n"; + if (reg_createKey(hRootKey2, OUString::createFromAscii("reg2ThirdKey").pData, &h2Key5)) + cout << "\n27. creating key \"reg2ThirdKey\" failed\n"; + else + cout << "27. key \"reg2ThirdKey\" is created\n"; + + sal_uInt32 nValue= 123456789; + if (reg_setValue(h2Key3, OUString().pData, RG_VALUETYPE_LONG, &nValue, sizeof(sal_uInt32))) + cout << "\t27.b) setValue of key \"reg2FirstSubKey\" failed\n"; + else + cout << "27.b). setValue (long Value) of key \"reg2FirstSubKey\"\n"; + + if (reg_closeKey(h2Key1) || + reg_closeKey(h2Key2) || + reg_closeKey(h2Key3) || + reg_closeKey(h2Key4) || + reg_closeKey(h2Key5)) + cout << "\n\t28. closing keys of \"test5.rdb\" failed\n"; + else + cout << "\n28. all keys of \"test5.rdb\" closed\n"; + + if (reg_closeKey(hRootKey2)) + cout << "\t29. root key of \"test5.rdb\" failed\n"; + else + cout << "29. root key of \"test5.rdb\" is closed\n"; + + if (reg_closeRegistry(hReg2)) + cout << "\t30. registry test5.rdb is closed\n"; + else + cout << "30. registry test5.rdb is closed\n"; + + if (reg_openRegistry(OUString::createFromAscii("test4.rdb").pData, &hReg, REG_READWRITE)) + cout << "\t31. registry test4.rdb is opened\n"; + else + cout << "31. registry test4.rdb is opened\n"; + + if (reg_openRootKey(hReg, &hRootKey)) + cout << "\t32. open root key of \"test4.rdb\" is failed\n"; + else + cout << "32. root key of \"test4.rdb\" is opened\n"; + + if (reg_loadKey(hRootKey, OUString::createFromAscii("allFromTest2").pData, + OUString::createFromAscii("test5.rdb").pData)) + cout << "\n\t33. load all keys from \"test5.rdb\" under key \"allFromTest2\" failed\n"; + else + cout << "\n33. load all keys from test5.rdb under key \"allFromTest2\"\n"; + + if (reg_saveKey(hRootKey, OUString::createFromAscii("allFromTest2").pData, + OUString::createFromAscii("test6.rdb").pData)) + cout << "\n\t34. save all keys under \"allFromTest2\" in test6.rdb\n"; + else + cout << "\n34. save all keys under \"allFromTest2\" in test6.rdb\n"; + + + if (reg_createKey(hRootKey, OUString::createFromAscii("allFromTest3").pData, &hKey1)) + cout << "\t35. creating key \"allFromTest3\" failed\n"; + else + cout << "36. key \"allFromTest3\" is created\n"; + if (reg_createKey(hKey1, OUString::createFromAscii("myFirstKey2").pData, &hKey2)) + cout << "\t37. creating key \"myFirstKey2\" failed\n"; + else + cout << "37. key \"myFirstKey2\" is created\n"; + if (reg_createKey(hKey1, OUString::createFromAscii("mySecondKey2").pData, &hKey3)) + cout << "\t38. creating key \"mySecondKey2\" failed\n"; + else + cout << "38. key \"mySecondKey2\" is created\n"; + + if (reg_mergeKey(hRootKey, OUString::createFromAscii("allFromTest3").pData, + OUString::createFromAscii("test6.rdb").pData, sal_False, sal_False)) + cout << "\n\t39. merge all keys under \"allFromTest2\" with all in test6.rdb\n"; + else + cout << "\n39. merge all keys under \"allFromTest2\" with all in test6.rdb\n"; + + if (reg_closeKey(hKey1)) + cout << "\n\t40. closing key \"allFromTest3\" of \"test5.rdb\" failed\n"; + else + cout << "\n40. closing key \"allFromTest3\" of \"test5.rdb\"\n"; + if (reg_closeKey(hKey2)) + cout << "\n\t41. closing key \"myFirstKey2\" of \"test5.rdb\" failed\n"; + else + cout << "\n41. closing key \"myFirstKey2\" of \"test5.rdb\"\n"; + if (reg_closeKey(hKey3)) + cout << "\n\t42. closing key \"mySecondKey2\" of \"test5.rdb\" failed\n"; + else + cout << "\n42. closing key \"mySecondKey2\" of \"test5.rdb\"\n"; + + + if (reg_deleteKey(hRootKey, OUString::createFromAscii("/allFromTest3/reg2FirstKey/reg2FirstSubKey").pData)) + cout << "\n\t43. delete key \"/allFromTest3/reg2FirstKey/reg2FirstSubKey\" failed\n"; + else + cout << "\n43. key \"/allFromTest3/reg2FirstKey/reg2FirstSubKey\" is deleted\n"; + + if (reg_openRegistry(OUString::createFromAscii("test4.rdb").pData, &hReg2, REG_READONLY)) + cout << "\n\t44. registry test4.rdb is opened for read only\n"; + else + cout << "\n44. registry test4.rdb is opened for read only\n"; + + RegHandle hReg3; + if (reg_openRegistry(OUString::createFromAscii("test4.rdb").pData, &hReg3, REG_READONLY)) + cout << "\n\t44.a). registry test4.rdb is opened for read only\n"; + else + cout << "\n44.a). registry test4.rdb is opened for read only\n"; + + if (reg_closeRegistry(hReg2)) + cout << "\t45. closing registry \"test4.rdb\" failed\n"; + else + cout << "45. registry \"test4.rdb\" is closed\n"; + + if (reg_closeKey(hRootKey)) + cout << "\n\t46. closing root key of \"test4.rdb\" failed\n"; + else + cout << "\n46. root key of \"test4.rdb\" is closed\n"; + + if (reg_closeRegistry(hReg)) + cout << "\t47. closing registry \"test4.rdb\" failed\n"; + else + cout << "47. registry \"test4.rdb\" is closed\n"; + + if (reg_closeRegistry(hReg3)) + cout << "\t47.a). closing registry \"test4.rdb\" failed\n"; + else + cout << "47.a). registry \"test4.rdb\" is closed\n"; + + return(0); +} + + |