summaryrefslogtreecommitdiff
path: root/cui/source/tabpages/transfrm.cxx
diff options
context:
space:
mode:
Diffstat (limited to 'cui/source/tabpages/transfrm.cxx')
-rw-r--r--cui/source/tabpages/transfrm.cxx150
1 files changed, 75 insertions, 75 deletions
diff --git a/cui/source/tabpages/transfrm.cxx b/cui/source/tabpages/transfrm.cxx
index eac242eda649..3da5625fb774 100644
--- a/cui/source/tabpages/transfrm.cxx
+++ b/cui/source/tabpages/transfrm.cxx
@@ -172,11 +172,11 @@ SvxAngleTabPage::SvxAngleTabPage(TabPageParent pParent, const SfxItemSet& rInAtt
: SvxTabPage(pParent, "cui/ui/rotationtabpage.ui", "Rotation", rInAttrs)
, rOutAttrs(rInAttrs)
, pView(nullptr)
- , eDlgUnit(FUNIT_NONE)
+ , eDlgUnit(FieldUnit::NONE)
, m_aCtlRect(this)
, m_xFlPosition(m_xBuilder->weld_widget("FL_POSITION"))
- , m_xMtrPosX(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_X", FUNIT_CM))
- , m_xMtrPosY(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_Y", FUNIT_CM))
+ , m_xMtrPosX(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_X", FieldUnit::CM))
+ , m_xMtrPosY(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_Y", FieldUnit::CM))
, m_xCtlRect(new weld::CustomWeld(*m_xBuilder, "CTL_RECT", m_aCtlRect))
, m_xFlAngle(m_xBuilder->weld_widget("FL_ANGLE"))
, m_xNfAngle(m_xBuilder->weld_spin_button("NF_ANGLE"))
@@ -201,7 +201,7 @@ void SvxAngleTabPage::Construct()
SetFieldUnit(*m_xMtrPosX, eDlgUnit, true);
SetFieldUnit(*m_xMtrPosY, eDlgUnit, true);
- if (FUNIT_MILE == eDlgUnit || FUNIT_KM == eDlgUnit)
+ if (FieldUnit::MILE == eDlgUnit || FieldUnit::KM == eDlgUnit)
{
m_xMtrPosX->set_digits(3);
m_xMtrPosY->set_digits(3);
@@ -336,56 +336,56 @@ void SvxAngleTabPage::PointChanged(weld::DrawingArea* pDrawingArea, RectPoint eR
{
case RectPoint::LT:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::MT:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::RT:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::LM:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::MM:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::RM:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::LB:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
case RectPoint::MB:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
case RectPoint::RB:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
}
@@ -401,19 +401,19 @@ SvxSlantTabPage::SvxSlantTabPage(TabPageParent pParent, const SfxItemSet& rInAtt
: SfxTabPage(pParent, "cui/ui/slantcornertabpage.ui", "SlantAndCornerRadius", &rInAttrs)
, rOutAttrs(rInAttrs)
, pView(nullptr)
- , eDlgUnit(FUNIT_NONE)
+ , eDlgUnit(FieldUnit::NONE)
, m_xFlRadius(m_xBuilder->weld_widget("FL_RADIUS"))
- , m_xMtrRadius(m_xBuilder->weld_metric_spin_button("MTR_FLD_RADIUS", FUNIT_CM))
+ , m_xMtrRadius(m_xBuilder->weld_metric_spin_button("MTR_FLD_RADIUS", FieldUnit::CM))
, m_xFlAngle(m_xBuilder->weld_widget("FL_SLANT"))
- , m_xMtrAngle(m_xBuilder->weld_metric_spin_button("MTR_FLD_ANGLE", FUNIT_DEGREE))
+ , m_xMtrAngle(m_xBuilder->weld_metric_spin_button("MTR_FLD_ANGLE", FieldUnit::DEGREE))
{
for (int i = 0; i < 2; ++i)
{
m_aControlGroups[i] = m_xBuilder->weld_widget("controlgroups" + OString::number(i+1));
m_aControlGroupX[i] = m_xBuilder->weld_widget("controlgroupx" + OString::number(i+1));
- m_aControlX[i] = m_xBuilder->weld_metric_spin_button("controlx" + OString::number(i+1), FUNIT_CM);
+ m_aControlX[i] = m_xBuilder->weld_metric_spin_button("controlx" + OString::number(i+1), FieldUnit::CM);
m_aControlGroupY[i] = m_xBuilder->weld_widget("controlgroupy" + OString::number(i+1));
- m_aControlY[i] = m_xBuilder->weld_metric_spin_button("controly" + OString::number(i+1), FUNIT_CM);
+ m_aControlY[i] = m_xBuilder->weld_metric_spin_button("controly" + OString::number(i+1), FieldUnit::CM);
}
// this page needs ExchangeSupport
@@ -463,7 +463,7 @@ bool SvxSlantTabPage::FillItemSet(SfxItemSet* rAttrs)
if (m_xMtrAngle->get_value_changed_from_saved())
{
- sal_Int32 nValue = static_cast<sal_Int32>(m_xMtrAngle->get_value(FUNIT_NONE));
+ sal_Int32 nValue = static_cast<sal_Int32>(m_xMtrAngle->get_value(FieldUnit::NONE));
rAttrs->Put( SfxInt32Item( SID_ATTR_TRANSFORM_SHEAR, nValue ) );
bModified = true;
}
@@ -609,7 +609,7 @@ void SvxSlantTabPage::Reset(const SfxItemSet* rAttrs)
if( pItem )
{
- m_xMtrAngle->set_value(static_cast<const SfxInt32Item*>(pItem)->GetValue(), FUNIT_NONE);
+ m_xMtrAngle->set_value(static_cast<const SfxInt32Item*>(pItem)->GetValue(), FieldUnit::NONE);
}
else
{
@@ -685,11 +685,11 @@ void SvxSlantTabPage::Reset(const SfxItemSet* rAttrs)
if (aMaxPosition.X() == aMinPosition.X())
m_aControlGroupX[i]->set_sensitive(false);
else
- m_aControlX[i]->set_range(aMinPosition.X(), aMaxPosition.X(), FUNIT_MM);
+ m_aControlX[i]->set_range(aMinPosition.X(), aMaxPosition.X(), FieldUnit::MM);
if (aMaxPosition.Y() == aMinPosition.Y())
m_aControlGroupY[i]->set_sensitive(false);
else
- m_aControlY[i]->set_range(aMinPosition.Y(), aMaxPosition.Y(), FUNIT_MM);
+ m_aControlY[i]->set_range(aMinPosition.Y(), aMaxPosition.Y(), FieldUnit::MM);
}
//restore geometry
@@ -751,7 +751,7 @@ SvxPositionSizeTabPage::SvxPositionSizeTabPage(TabPageParent pParent, const SfxI
: SvxTabPage(pParent, "cui/ui/possizetabpage.ui", "PositionAndSize", rInAttrs)
, mrOutAttrs(rInAttrs)
, mpView(nullptr)
- , meDlgUnit(FUNIT_NONE)
+ , meDlgUnit(FieldUnit::NONE)
, mnProtectSizeState(TRISTATE_FALSE)
, mbPageDisabled(false)
, mbProtectDisabled(false)
@@ -764,14 +764,14 @@ SvxPositionSizeTabPage::SvxPositionSizeTabPage(TabPageParent pParent, const SfxI
, m_aCtlPos(this)
, m_aCtlSize(this)
, m_xFlPosition(m_xBuilder->weld_widget("FL_POSITION"))
- , m_xMtrPosX(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_X", FUNIT_CM))
- , m_xMtrPosY(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_Y", FUNIT_CM))
+ , m_xMtrPosX(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_X", FieldUnit::CM))
+ , m_xMtrPosY(m_xBuilder->weld_metric_spin_button("MTR_FLD_POS_Y", FieldUnit::CM))
, m_xCtlPos(new weld::CustomWeld(*m_xBuilder, "CTL_POSRECT", m_aCtlPos))
, m_xFlSize(m_xBuilder->weld_widget("FL_SIZE"))
, m_xFtWidth(m_xBuilder->weld_label("FT_WIDTH"))
- , m_xMtrWidth(m_xBuilder->weld_metric_spin_button("MTR_FLD_WIDTH", FUNIT_CM))
+ , m_xMtrWidth(m_xBuilder->weld_metric_spin_button("MTR_FLD_WIDTH", FieldUnit::CM))
, m_xFtHeight(m_xBuilder->weld_label("FT_HEIGHT"))
- , m_xMtrHeight(m_xBuilder->weld_metric_spin_button("MTR_FLD_HEIGHT", FUNIT_CM))
+ , m_xMtrHeight(m_xBuilder->weld_metric_spin_button("MTR_FLD_HEIGHT", FieldUnit::CM))
, m_xCbxScale(m_xBuilder->weld_check_button("CBX_SCALE"))
, m_xCtlSize(new weld::CustomWeld(*m_xBuilder, "CTL_SIZERECT", m_aCtlSize))
, m_xFlProtect(m_xBuilder->weld_widget("FL_PROTECT"))
@@ -820,7 +820,7 @@ void SvxPositionSizeTabPage::Construct()
SetFieldUnit( *m_xMtrWidth, meDlgUnit, true );
SetFieldUnit( *m_xMtrHeight, meDlgUnit, true );
- if(FUNIT_MILE == meDlgUnit || FUNIT_KM == meDlgUnit)
+ if(FieldUnit::MILE == meDlgUnit || FieldUnit::KM == meDlgUnit)
{
m_xMtrPosX->set_digits( 3 );
m_xMtrPosY->set_digits( 3 );
@@ -966,13 +966,13 @@ bool SvxPositionSizeTabPage::FillItemSet( SfxItemSet* rOutAttrs )
Fraction aUIScale = mpView->GetModel()->GetUIScale();
// get Width
- double nWidth = static_cast<double>(m_xMtrWidth->get_value(FUNIT_100TH_MM));
+ double nWidth = static_cast<double>(m_xMtrWidth->get_value(FieldUnit::MM_100TH));
long lWidth = long(nWidth * static_cast<double>(aUIScale));
lWidth = OutputDevice::LogicToLogic( lWidth, MapUnit::Map100thMM, mePoolUnit );
lWidth = static_cast<long>(m_xMtrWidth->denormalize( lWidth ));
// get Height
- double nHeight = static_cast<double>(m_xMtrHeight->get_value(FUNIT_100TH_MM));
+ double nHeight = static_cast<double>(m_xMtrHeight->get_value(FieldUnit::MM_100TH));
long lHeight = long(nHeight * static_cast<double>(aUIScale));
lHeight = OutputDevice::LogicToLogic( lHeight, MapUnit::Map100thMM, mePoolUnit );
lHeight = static_cast<long>(m_xMtrHeight->denormalize( lHeight ));
@@ -1075,7 +1075,7 @@ void SvxPositionSizeTabPage::Reset( const SfxItemSet* )
double fTmpWidth((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldWidth), mePoolUnit, MapUnit::Map100thMM)) / fUIScale);
if (m_xMtrWidth->get_digits())
fTmpWidth *= pow(10.0, m_xMtrWidth->get_digits());
- m_xMtrWidth->set_value(static_cast<int>(fTmpWidth), FUNIT_100TH_MM);
+ m_xMtrWidth->set_value(static_cast<int>(fTmpWidth), FieldUnit::MM_100TH);
}
{ // #i75273# set height
@@ -1084,7 +1084,7 @@ void SvxPositionSizeTabPage::Reset( const SfxItemSet* )
double fTmpHeight((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldHeight), mePoolUnit, MapUnit::Map100thMM)) / fUIScale);
if (m_xMtrHeight->get_digits())
fTmpHeight *= pow(10.0, m_xMtrHeight->get_digits());
- m_xMtrHeight->set_value(static_cast<int>(fTmpHeight), FUNIT_100TH_MM);
+ m_xMtrHeight->set_value(static_cast<int>(fTmpHeight), FieldUnit::MM_100TH);
}
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_SIZE );
@@ -1149,8 +1149,8 @@ DeactivateRC SvxPositionSizeTabPage::DeactivatePage( SfxItemSet* _pSet )
{
if( _pSet )
{
- double fX(static_cast<double>(m_xMtrPosX->get_value(FUNIT_NONE)));
- double fY(static_cast<double>(m_xMtrPosY->get_value(FUNIT_NONE)));
+ double fX(static_cast<double>(m_xMtrPosX->get_value(FieldUnit::NONE)));
+ double fY(static_cast<double>(m_xMtrPosY->get_value(FieldUnit::NONE)));
GetTopLeftPosition(fX, fY, maRange);
const ::tools::Rectangle aOutRectangle(
@@ -1304,8 +1304,8 @@ void SvxPositionSizeTabPage::SetMinMaxPosition()
fBottom = o3tl::clamp(fBottom, -fMaxLong, fMaxLong);
// #i75273# normalizing when setting the min/max values was wrong, removed
- m_xMtrPosX->set_range(basegfx::fround64(fLeft), basegfx::fround64(fRight), FUNIT_NONE);
- m_xMtrPosY->set_range(basegfx::fround64(fTop), basegfx::fround64(fBottom), FUNIT_NONE);
+ m_xMtrPosX->set_range(basegfx::fround64(fLeft), basegfx::fround64(fRight), FieldUnit::NONE);
+ m_xMtrPosY->set_range(basegfx::fround64(fTop), basegfx::fround64(fBottom), FieldUnit::NONE);
// size
fLeft = maWorkRange.getMinX();
@@ -1382,8 +1382,8 @@ void SvxPositionSizeTabPage::SetMinMaxPosition()
}
// #i75273# normalizing when setting the min/max values was wrong, removed
- m_xMtrWidth->set_max(basegfx::fround64(fNewX), FUNIT_NONE);
- m_xMtrHeight->set_max(basegfx::fround64(fNewY), FUNIT_NONE);
+ m_xMtrWidth->set_max(basegfx::fround64(fNewX), FieldUnit::NONE);
+ m_xMtrHeight->set_max(basegfx::fround64(fNewY), FieldUnit::NONE);
}
void SvxPositionSizeTabPage::GetTopLeftPosition(double& rfX, double& rfY, const basegfx::B2DRange& rRange)
@@ -1450,56 +1450,56 @@ void SvxPositionSizeTabPage::PointChanged(weld::DrawingArea* pDrawingArea, RectP
{
case RectPoint::LT:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::MT:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::RT:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::LM:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::MM:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::RM:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::LB:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
case RectPoint::MB:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
case RectPoint::RB:
{
- m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FUNIT_NONE );
- m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FUNIT_NONE );
+ m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
+ m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
}
@@ -1527,21 +1527,21 @@ IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeWidthHdl, weld::MetricSpinButton&,
{
if( m_xCbxScale->get_active() && m_xCbxScale->get_sensitive() )
{
- sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(m_xMtrWidth->get_value(FUNIT_NONE))) / mfOldWidth));
+ sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(m_xMtrWidth->get_value(FieldUnit::NONE))) / mfOldWidth));
int nMin, nMax;
- m_xMtrHeight->get_range(nMin, nMax, FUNIT_NONE);
+ m_xMtrHeight->get_range(nMin, nMax, FieldUnit::NONE);
if (nHeight <= nMax)
{
- m_xMtrHeight->set_value(nHeight, FUNIT_NONE);
+ m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
}
else
{
nHeight = nMax;
- m_xMtrHeight->set_value(nHeight, FUNIT_NONE);
+ m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
const sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(nHeight)) / mfOldHeight));
- m_xMtrWidth->set_value(nWidth, FUNIT_NONE);
+ m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
}
}
}
@@ -1550,21 +1550,21 @@ IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeHeightHdl, weld::MetricSpinButton&
{
if( m_xCbxScale->get_active() && m_xCbxScale->get_sensitive() )
{
- sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(m_xMtrHeight->get_value(FUNIT_NONE))) / mfOldHeight));
+ sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(m_xMtrHeight->get_value(FieldUnit::NONE))) / mfOldHeight));
int nMin, nMax;
- m_xMtrWidth->get_range(nMin, nMax, FUNIT_NONE);
+ m_xMtrWidth->get_range(nMin, nMax, FieldUnit::NONE);
if (nWidth <= nMax)
{
- m_xMtrWidth->set_value(nWidth, FUNIT_NONE);
+ m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
}
else
{
nWidth = nMax;
- m_xMtrWidth->set_value(nWidth, FUNIT_NONE);
+ m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
const sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(nWidth)) / mfOldWidth));
- m_xMtrHeight->set_value(nHeight, FUNIT_NONE);
+ m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
}
}
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-26 11:32:09 +0000