diff options
Diffstat (limited to 'configure.ac')
| -rw-r--r-- | configure.ac | 354 |
1 files changed, 171 insertions, 183 deletions
diff --git a/configure.ac b/configure.ac index 736c772eebee..9fcac74e93ef 100644 --- a/configure.ac +++ b/configure.ac @@ -800,26 +800,27 @@ if test "$enable_android_editing" = yes; then fi AC_SUBST([ENABLE_ANDROID_EDITING]) -dnl =================================================================== -dnl The following is a list of supported systems. -dnl Sequential to keep the logic very simple -dnl These values may be checked and reset later. -dnl =================================================================== -#defaults unless the os test overrides this: +# =================================================================== +# +# Start initial platform setup +# +# The using_* variables reflect platform support and should not be +# changed after the "End initial platform setup" block. +# This is also true for most test_* variables. +# =================================================================== build_crypto=yes test_cmis=yes test_curl=yes -test_randr=yes -test_xrender=yes -test_cups=yes -test_dbus=yes -test_fontconfig=yes -test_cairo=no test_gdb_index=no test_split_debug=no -test_openldap=yes test_webdav=yes +# There is currently just iOS not using salplug, so this explicitly enables it. +# must: using_freetype_fontconfig +# may: using_headless_plugin defaults to $using_freetype_fontconfig +using_vclplug=yes +# must: using_x11 + # Default values, as such probably valid just for Linux, set # differently below just for Mac OSX, but at least better than # hardcoding these as we used to do. Much of this is duplicated also @@ -843,8 +844,8 @@ host_cpu_for_clang="$host_cpu" case "$host_os" in solaris*) - build_gstreamer_1_0=yes - test_freetype=yes + using_freetype_fontconfig=yes + using_x11=yes build_skia=yes _os=SunOS @@ -869,31 +870,24 @@ solaris*) ;; linux-gnu*|k*bsd*-gnu*) - build_gstreamer_1_0=yes - test_kf5=yes - test_gtk3_kde5=yes + using_freetype_fontconfig=yes + using_x11=yes build_skia=yes test_gdb_index=yes test_split_debug=yes - if test "$enable_fuzzers" != yes; then - test_freetype=yes - test_fontconfig=yes - else - test_freetype=no - test_fontconfig=no - BUILD_TYPE="$BUILD_TYPE FONTCONFIG FREETYPE" + if test "$enable_fuzzers" = yes; then + test_system_freetype=no fi _os=Linux ;; gnu) - test_randr=no - test_xrender=no + using_freetype_fontconfig=yes + using_x11=no _os=GNU ;; cygwin*|wsl*) - # When building on Windows normally with MSVC under Cygwin, # configure thinks that the host platform (the platform the # built code will run on) is Cygwin, even if it obviously is @@ -905,13 +899,8 @@ cygwin*|wsl*) # look at $host etc that much, it mostly uses its own $_os # variable, set here in this case statement. - test_cups=no - test_dbus=no - test_randr=no - test_xrender=no - test_freetype=no - test_fontconfig=no - test_openldap=no + using_freetype_fontconfig=no + using_x11=no build_skia=yes _os=WINNT @@ -926,11 +915,8 @@ cygwin*|wsl*) ;; darwin*|macos*) # macOS - test_randr=no - test_xrender=no - test_freetype=no - test_fontconfig=no - test_dbus=no + using_freetype_fontconfig=no + using_x11=no if test -n "$LODE_HOME" ; then mac_sanitize_path AC_MSG_NOTICE([sanitized the PATH to $PATH]) @@ -965,14 +951,11 @@ darwin*|macos*) # macOS ;; ios*) # iOS + using_freetype_fontconfig=no + using_vclplug=no + using_x11=no build_crypto=no test_cmis=no - test_randr=no - test_xrender=no - test_freetype=no - test_fontconfig=no - test_dbus=no - test_openldap=no test_webdav=no if test -n "$LODE_HOME" ; then mac_sanitize_path @@ -980,7 +963,6 @@ ios*) # iOS fi enable_gpgmepp=no _os=iOS - test_cups=no enable_mpl_subset=yes enable_lotuswordpro=no enable_coinmp=no @@ -1013,10 +995,8 @@ ios*) # iOS ;; freebsd*) - build_gstreamer_1_0=yes - test_kf5=yes - test_gtk3_kde5=yes - test_freetype=yes + using_freetype_fontconfig=yes + using_x11=yes build_skia=yes AC_MSG_CHECKING([the FreeBSD operating system release]) if test -n "$with_os_version"; then @@ -1041,44 +1021,49 @@ freebsd*) ;; *netbsd*) - build_gstreamer_1_0=yes - test_kf5=yes - test_gtk3_kde5=yes - test_freetype=yes + using_freetype_fontconfig=yes + using_x11=yes + test_gtk3_kde5=no build_skia=yes PTHREAD_LIBS="-pthread -lpthread" _os=NetBSD ;; aix*) + using_freetype_fontconfig=yes + using_x11=yes test_randr=no - test_freetype=yes + test_gstreamer_1_0=no PTHREAD_LIBS=-pthread _os=AIX ;; openbsd*) - test_freetype=yes + using_freetype_fontconfig=yes + using_x11=yes PTHREAD_CFLAGS="-D_THREAD_SAFE" PTHREAD_LIBS="-pthread" _os=OpenBSD ;; dragonfly*) - build_gstreamer_1_0=yes - test_kf5=yes - test_gtk3_kde5=yes - test_freetype=yes + using_freetype_fontconfig=yes + using_x11=yes build_skia=yes PTHREAD_LIBS="-pthread" _os=DragonFly ;; linux-android*) + using_freetype_fontconfig=yes + using_headless_plugin=no + using_x11=no build_crypto=no - build_gstreamer_1_0=no + test_system_freetype=no + test_webdav=no enable_lotuswordpro=no enable_mpl_subset=yes + enable_cairo_canvas=no enable_coinmp=yes enable_lpsolve=no enable_mariadb_sdbc=no @@ -1086,31 +1071,18 @@ linux-android*) enable_odk=no enable_postgresql_sdbc=no enable_python=no - test_cups=no - test_dbus=no - test_fontconfig=no - test_freetype=no - test_kf5=no - test_qt5=no - test_gtk3_kde5=no - test_openldap=no - test_randr=no - test_webdav=no - test_xrender=no _os=Android AC_DEFINE(HAVE_FT_FACE_GETCHARVARIANTINDEX) - BUILD_TYPE="$BUILD_TYPE CAIRO FONTCONFIG FREETYPE" ;; haiku*) - test_cups=no - test_dbus=no - test_randr=no - test_xrender=no - test_freetype=yes + using_freetype_fontconfig=yes + using_x11=no + test_gtk3_kde5=no + test_kf5=yes + test_openldap=yes enable_odk=no - enable_gstreamer_1_0=no enable_coinmp=no enable_pdfium=no enable_sdremote=no @@ -1120,27 +1092,19 @@ haiku*) ;; emscripten) - build_gstreamer_1_0=no - enable_lpsolve=no - enable_report_builder=no - with_theme="breeze" + using_freetype_fontconfig=yes + using_x11=no + enable_compiler_plugins=no test_cmis=no - test_cups=no - test_curl=no - test_dbus=no - test_fontconfig=no - test_freetype=no - test_gtk=no - test_randr=no test_webdav=no - test_xrender=no - enable_postgresql_sdbc=no enable_firebird_sdbc=no + enable_lpsolve=no enable_mariadb_sdbc=no + enable_postgresql_sdbc=no + enable_report_builder=no with_system_zlib=no + with_theme="breeze" _os=Emscripten - - BUILD_TYPE="$BUILD_TYPE FONTCONFIG FREETYPE" ;; *) @@ -1150,6 +1114,73 @@ esac AC_SUBST(HOST_PLATFORM) +if test -z "$using_x11" -o -z "$using_freetype_fontconfig"; then + AC_MSG_ERROR([You must set \$using_freetype_fontconfig and \$using_x11 for your platform]) +fi + +# Set defaults, if not set by platform +test "${test_cups+set}" = set || test_cups="$using_x11" +test "${test_dbus+set}" = set || test_dbus="$using_x11" +test "${test_gstreamer_1_0+set}" = set || test_gstreamer_1_0="$using_x11" +test "${test_gtk3+set}" = set || test_gtk3="$using_x11" +test "${test_gtk4+set}" = set || test_gtk4="$using_x11" +test "${test_kf5+set}" = set || test_kf5="$using_x11" +test "${test_openldap+set}" = set || test_openldap="$using_x11" +# don't handle test_qt5, so it can disable test_kf5 later +test "${test_randr+set}" = set || test_randr="$using_x11" +test "${test_xrender+set}" = set || test_xrender="$using_x11" +test "${using_headless_plugin+set}" = set || using_headless_plugin="$using_freetype_fontconfig" + +test "${test_gtk3_kde5+set}" != set -a "$test_kf5" = yes -a "$test_gtk3" = yes && test_gtk3_kde5="yes" +test "${test_system_fontconfig+set}" != set -a "${test_system_freetype+set}" = set && test_system_fontconfig="$test_system_freetype" +test "${test_system_freetype+set}" != set -a "${test_system_fontconfig+set}" = set && test_system_freetype="$test_system_fontconfig" + +# convenience / platform overriding "fixes" +# Don't sort! +test "$test_kf5" = yes -a "$test_qt5" = no && test_kf5=no +test "$test_kf5" = yes && test_qt5=yes +test "$test_gtk3" != yes -o "$test_kf5" != yes && test_gtk3_kde5=no +test "$using_freetype_fontconfig" = no && using_headless_plugin=no +test "$using_freetype_fontconfig" = yes && test_cairo=yes + +# Keep in sync with the above $using_x11 depending test default list +disable_x11_tests() +{ + test_cups=no + test_dbus=no + test_gstreamer_1_0=no + test_gtk3_kde5=no + test_gtk3=no + test_gtk4=no + test_kf5=no + test_openldap=no + test_qt5=no + test_randr=no + test_xrender=no +} + +test "$using_x11" = yes && USING_X11=TRUE + +if test "$using_freetype_fontconfig" = yes; then + if test "$using_headless_plugin" = yes; then + AC_DEFINE(ENABLE_HEADLESS) + ENABLE_HEADLESS=TRUE + fi +fi + +AC_SUBST(ENABLE_HEADLESS) + +AC_MSG_NOTICE([VCL platform uses freetype+fontconfig: $using_freetype_fontconfig]) +AC_MSG_NOTICE([VCL platform uses headless plugin: $using_headless_plugin]) +AC_MSG_NOTICE([VCL platform uses vclplug: $using_vclplug]) +AC_MSG_NOTICE([VCL platform uses X11: $using_x11]) + +# =================================================================== +# +# End initial platform setup +# +# =================================================================== + if test "$_os" = "Android" ; then # Verify that the NDK and SDK options are proper if test -z "$with_android_ndk"; then @@ -3674,7 +3705,6 @@ reg_get_value_64() case "$host_os" in cygwin*|wsl*) COM=MSC - USING_X11= OS=WNT RTL_OS=Windows if test "$GNUMAKE_WIN_NATIVE" = "TRUE" ; then @@ -4715,14 +4745,12 @@ AC_SUBST(ENABLE_OPTIMIZED_DEBUG) # # determine CPUNAME, OS, ... -# The USING_X11 flag tells whether the host os uses X by default. Can be overridden with the --without-x option. # case "$host_os" in aix*) COM=GCC CPUNAME=POWERPC - USING_X11=TRUE OS=AIX RTL_OS=AIX RTL_ARCH=PowerPC @@ -4736,7 +4764,6 @@ cygwin*|wsl*) darwin*|macos*) COM=GCC - USING_X11= OS=MACOSX RTL_OS=MacOSX P_SEP=: @@ -4767,7 +4794,6 @@ darwin*|macos*) ios*) COM=GCC - USING_X11= OS=iOS RTL_OS=iOS P_SEP=: @@ -4789,7 +4815,6 @@ ios*) dragonfly*) COM=GCC - USING_X11=TRUE OS=DRAGONFLY RTL_OS=DragonFly P_SEP=: @@ -4813,7 +4838,6 @@ dragonfly*) freebsd*) COM=GCC - USING_X11=TRUE RTL_OS=FreeBSD OS=FREEBSD P_SEP=: @@ -4852,7 +4876,6 @@ freebsd*) haiku*) COM=GCC - USING_X11= GUIBASE=haiku RTL_OS=Haiku OS=HAIKU @@ -4877,7 +4900,6 @@ haiku*) kfreebsd*) COM=GCC - USING_X11=TRUE OS=LINUX RTL_OS=kFreeBSD P_SEP=: @@ -4902,7 +4924,6 @@ kfreebsd*) linux-gnu*) COM=GCC - USING_X11=TRUE OS=LINUX RTL_OS=Linux P_SEP=: @@ -5025,7 +5046,6 @@ linux-gnu*) linux-android*) COM=GCC - USING_X11= OS=ANDROID RTL_OS=Android P_SEP=: @@ -5060,7 +5080,6 @@ linux-android*) *netbsd*) COM=GCC - USING_X11=TRUE OS=NETBSD RTL_OS=NetBSD P_SEP=: @@ -5094,7 +5113,6 @@ linux-android*) openbsd*) COM=GCC - USING_X11=TRUE OS=OPENBSD RTL_OS=OpenBSD P_SEP=: @@ -5119,7 +5137,6 @@ openbsd*) solaris*) COM=GCC - USING_X11=TRUE OS=SOLARIS RTL_OS=Solaris P_SEP=: @@ -5149,7 +5166,6 @@ solaris*) emscripten*) COM=GCC - USING_X11= OS=EMSCRIPTEN RTL_OS=Emscripten P_SEP=: @@ -5177,18 +5193,26 @@ fi DISABLE_GUI="" if test "$enable_gui" = "no"; then - if test "$USING_X11" != TRUE; then + if test "$using_x11" != yes; then AC_MSG_ERROR([$host_os operating system is not suitable to build LibreOffice with --disable-gui.]) fi USING_X11= DISABLE_GUI=TRUE - AC_DEFINE(HAVE_FEATURE_UI,0) - test_cairo=yes +else + AC_DEFINE(HAVE_FEATURE_UI) fi AC_SUBST(DISABLE_GUI) -if test "$USING_X11" = TRUE; then - AC_DEFINE(USING_X11) +if test "$using_x11" = yes; then + if test "$USING_X11" = TRUE; then + AC_DEFINE(USING_X11) + else + disable_x11_tests + fi +else + if test "$USING_X11" = TRUE; then + AC_MSG_ERROR([Platform doesn't support X11 (\$using_x11), but \$USING_X11 is set!]) + fi fi WORKDIR="${BUILDDIR}/workdir" @@ -5353,11 +5377,13 @@ if test "$cross_compiling" = "yes"; then # Don't bother having configure look for stuff not needed for the build platform anyway ./configure \ --build="$build_alias" \ + --disable-cairo-canvas \ --disable-cups \ --disable-firebird-sdbc \ --disable-gpgmepp \ --disable-gstreamer-1-0 \ --disable-gtk3 \ + --disable-gtk4 \ --disable-mariadb-sdbc \ --disable-nss \ --disable-online-update \ @@ -5600,28 +5626,6 @@ if test $_os != "WINNT" -a $_os != "Darwin"; then fi AC_SUBST(ENABLE_OOENV) -if test "$USING_X11" != TRUE; then - # be sure to do not mess with unneeded stuff - test_randr=no - test_xrender=no - test_cups=no - test_dbus=no - build_gstreamer_1_0=no - test_kf5=no - test_qt5=no - test_gtk3_kde5=no - enable_cairo_canvas=no -fi - -if test "$OS" = "HAIKU"; then - enable_cairo_canvas=yes - test_kf5=yes -fi - -if test "$test_kf5" = "yes"; then - test_qt5=yes -fi - if test "$test_kf5" = "yes" -a "$enable_kf5" = "yes"; then if test "$enable_qt5" = "no"; then AC_MSG_ERROR([KF5 support depends on QT5, so it conflicts with --disable-qt5]) @@ -5652,11 +5656,18 @@ fi AC_SUBST(ENABLE_CUPS) # fontconfig checks -if test "$test_fontconfig" = "yes"; then +if test "$using_freetype_fontconfig" = yes; then + AC_MSG_CHECKING([which fontconfig to use]) +fi +if test "$using_freetype_fontconfig" = yes -a "$test_system_fontconfig" != no; then + AC_MSG_RESULT([external]) PKG_CHECK_MODULES([FONTCONFIG], [fontconfig >= 2.4.1]) SYSTEM_FONTCONFIG=TRUE FilterLibs "${FONTCONFIG_LIBS}" FONTCONFIG_LIBS="${filteredlibs}" +elif test "$using_freetype_fontconfig" = yes; then + AC_MSG_RESULT([internal]) + BUILD_TYPE="$BUILD_TYPE FONTCONFIG" fi AC_SUBST(FONTCONFIG_CFLAGS) AC_SUBST(FONTCONFIG_LIBS) @@ -9301,8 +9312,11 @@ fi dnl =================================================================== dnl Check whether freetype is available dnl =================================================================== -if test "$test_freetype" = "yes"; then - AC_MSG_CHECKING([whether freetype is available]) +if test "$using_freetype_fontconfig" = yes; then + AC_MSG_CHECKING([which freetype to use]) +fi +if test "$using_freetype_fontconfig" = yes -a "$test_system_freetype" != no; then + AC_MSG_RESULT([external]) # FreeType has 3 different kinds of versions # * release, like 2.4.10 # * libtool, like 13.0.7 (this what pkg-config returns) @@ -9315,13 +9329,15 @@ if test "$test_freetype" = "yes"; then FilterLibs "${FREETYPE_LIBS}" FREETYPE_LIBS="${filteredlibs}" SYSTEM_FREETYPE=TRUE -else +elif test "$using_freetype_fontconfig" = yes; then + AC_MSG_RESULT([internal]) FREETYPE_CFLAGS="${ISYSTEM}${WORKDIR}/UnpackedTarball/freetype/include" if test "x$ac_config_site_64bit_host" = xYES; then FREETYPE_LIBS="-L${WORKDIR}/UnpackedTarball/freetype/instdir/lib64 -lfreetype" else FREETYPE_LIBS="-L${WORKDIR}/UnpackedTarball/freetype/instdir/lib -lfreetype" fi + BUILD_TYPE="$BUILD_TYPE FREETYPE" fi AC_SUBST(FREETYPE_CFLAGS) AC_SUBST(FREETYPE_LIBS) @@ -10648,15 +10664,6 @@ else fi fi -AC_MSG_CHECKING([whether to use X11]) -dnl *************************************** -dnl testing for X libraries and includes... -dnl *************************************** -if test "$USING_X11" = TRUE; then - AC_DEFINE(HAVE_FEATURE_X11) -fi -AC_MSG_RESULT([$USING_X11]) - if test "$USING_X11" = TRUE; then AC_PATH_X AC_PATH_XTRA @@ -11502,7 +11509,9 @@ if test "$_os" = "WINNT"; then elif test "$_os" = "Darwin"; then R="$R osx" elif test "$_os" = "iOS"; then - R="ios (builtin)" + R="ios" +elif test "$_os" = Android; then + R="android" fi build_vcl_plugins="$R" @@ -11519,11 +11528,10 @@ dnl =================================================================== GTK3_CFLAGS="" GTK3_LIBS="" -if test "x$enable_gtk3" = "xyes" -o "x$enable_gtk3_kde5" = "xyes"; then +if test "$test_gtk3" = yes -a "x$enable_gtk3" = "xyes" -o "x$enable_gtk3_kde5" = "xyes"; then if test "$with_system_cairo" = no; then add_warning 'Non-system cairo combined with gtk3 is assumed to cause trouble; proceed at your own risk.' fi - : ${with_system_cairo:=yes} PKG_CHECK_MODULES(GTK3, gtk+-3.0 >= 3.20 gtk+-unix-print-3.0 gmodule-no-export-2.0 glib-2.0 >= 2.38 cairo) GTK3_CFLAGS=$(printf '%s' "$GTK3_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g") GTK3_CFLAGS="$GTK3_CFLAGS -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED" @@ -11542,11 +11550,10 @@ AC_SUBST(GTK3_CFLAGS) GTK4_CFLAGS="" GTK4_LIBS="" -if test "x$enable_gtk4" = "xyes"; then +if test "test_gtk4" = yes -a "x$enable_gtk4" = "xyes"; then if test "$with_system_cairo" = no; then add_warning 'Non-system cairo combined with gtk4 is assumed to cause trouble; proceed at your own risk.' fi - : ${with_system_cairo:=yes} PKG_CHECK_MODULES(GTK4, gtk4 gmodule-no-export-2.0 glib-2.0 >= 2.38 cairo atk) GTK4_CFLAGS=$(printf '%s' "$GTK4_CFLAGS" | sed -e "s/-I/${ISYSTEM?}/g") GTK4_CFLAGS="$GTK4_CFLAGS -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED" @@ -11723,30 +11730,13 @@ if test "$enable_split_opt_features" = "yes"; then fi AC_SUBST(SPLIT_OPT_FEATURES) -if test $_os = Darwin -o $_os = WINNT -o $_os = iOS; then - if test "$enable_cairo_canvas" = yes; then - AC_MSG_ERROR([The cairo canvas should not be used for this platform]) - fi - enable_cairo_canvas=no -elif test -z "$enable_cairo_canvas"; then - enable_cairo_canvas=yes -fi - -ENABLE_CAIRO_CANVAS="" -if test "$enable_cairo_canvas" = "yes"; then - test_cairo=yes - ENABLE_CAIRO_CANVAS="TRUE" - AC_DEFINE(ENABLE_CAIRO_CANVAS) -fi -AC_SUBST(ENABLE_CAIRO_CANVAS) - dnl =================================================================== dnl Check whether the GStreamer libraries are available. dnl =================================================================== ENABLE_GSTREAMER_1_0="" -if test "$build_gstreamer_1_0" = "yes"; then +if test "$test_gstreamer_1_0" = yes; then AC_MSG_CHECKING([whether to enable the GStreamer 1.0 avmedia backend]) if test "$enable_avmedia" = yes -a "$enable_gstreamer_1_0" != no; then @@ -12729,7 +12719,7 @@ then the root of your Qt installation by exporting QT5DIR before running "configure".]) fi - if test "$build_gstreamer_1_0" = "yes"; then + if test "$test_gstreamer_1_0" = yes; then PKG_CHECK_MODULES(QT5_GOBJECT,[gobject-2.0], [ QT5_HAVE_GOBJECT=1 AC_DEFINE(QT5_HAVE_GOBJECT) @@ -13114,15 +13104,9 @@ dnl =================================================================== dnl Test whether to build cairo or rely on the system version dnl =================================================================== -if test "$USING_X11" = TRUE; then - # Used in vcl/Library_vclplug_gen.mk - test_cairo=yes -fi - if test "$test_cairo" = "yes"; then AC_MSG_CHECKING([whether to use the system cairo]) - : ${with_system_cairo:=$with_system_libs} if test "$with_system_cairo" = "yes"; then SYSTEM_CAIRO=TRUE AC_MSG_RESULT([yes]) @@ -13145,16 +13129,20 @@ if test "$test_cairo" = "yes"; then AC_LANG_POP([C]) fi else - SYSTEM_CAIRO= AC_MSG_RESULT([no]) - BUILD_TYPE="$BUILD_TYPE CAIRO" fi + + if test "$enable_cairo_canvas" != no; then + AC_DEFINE(ENABLE_CAIRO_CANVAS) + ENABLE_CAIRO_CANVAS=TRUE + fi fi -AC_SUBST(SYSTEM_CAIRO) AC_SUBST(CAIRO_CFLAGS) AC_SUBST(CAIRO_LIBS) +AC_SUBST(ENABLE_CAIRO_CANVAS) +AC_SUBST(SYSTEM_CAIRO) dnl =================================================================== dnl Test whether to use avahi |