initial import

1 files changed, 514 insertions, 0 deletions

diff --git a/sw/source/ui/frmdlg/colex.cxx b/sw/source/ui/frmdlg/colex.cxx
new file mode 100644
index 000000000000..514f6718c4f6
--- /dev/null
+++ b/sw/source/ui/frmdlg/colex.cxx
@@ -0,0 +1,514 @@
+/*************************************************************************
+ *
+ *  $RCSfile: colex.cxx,v $
+ *
+ *  $Revision: 1.1.1.1 $
+ *
+ *  last change: $Author: hr $ $Date: 2000-09-18 17:14:37 $
+ *
+ *  The Contents of this file are made available subject to the terms of
+ *  either of the following licenses
+ *
+ *         - GNU Lesser General Public License Version 2.1
+ *         - Sun Industry Standards Source License Version 1.1
+ *
+ *  Sun Microsystems Inc., October, 2000
+ *
+ *  GNU Lesser General Public License Version 2.1
+ *  =============================================
+ *  Copyright 2000 by Sun Microsystems, Inc.
+ *  901 San Antonio Road, Palo Alto, CA 94303, USA
+ *
+ *  This library is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU Lesser General Public
+ *  License version 2.1, as published by the Free Software Foundation.
+ *
+ *  This library is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public
+ *  License along with this library; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *  MA  02111-1307  USA
+ *
+ *
+ *  Sun Industry Standards Source License Version 1.1
+ *  =================================================
+ *  The contents of this file are subject to the Sun Industry Standards
+ *  Source License Version 1.1 (the "License"); You may not use this file
+ *  except in compliance with the License. You may obtain a copy of the
+ *  License at http://www.openoffice.org/license.html.
+ *
+ *  Software provided under this License is provided on an "AS IS" basis,
+ *  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
+ *  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
+ *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
+ *  See the License for the specific provisions governing your rights and
+ *  obligations concerning the Software.
+ *
+ *  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
+ *
+ *  Copyright: 2000 by Sun Microsystems, Inc.
+ *
+ *  All Rights Reserved.
+ *
+ *  Contributor(s): _______________________________________
+ *
+ *
+ ************************************************************************/
+
+#ifdef PRECOMPILED
+#include "ui_pch.hxx"
+#endif
+
+#pragma hdrstop
+
+#include "cmdid.h"
+#include "hintids.hxx"
+#include "uiparam.hxx"
+
+
+#ifndef _SFXENUMITEM_HXX //autogen
+#include <svtools/eitem.hxx>
+#endif
+#ifndef _SVX_LRSPITEM_HXX //autogen
+#include <svx/lrspitem.hxx>
+#endif
+#ifndef _SVX_ULSPITEM_HXX //autogen
+#include <svx/ulspitem.hxx>
+#endif
+#ifndef _SVX_SIZEITEM_HXX //autogen
+#include <svx/sizeitem.hxx>
+#endif
+#ifndef _SVX_PAGEITEM_HXX //autogen
+#include <svx/pageitem.hxx>
+#endif
+
+#include "colex.hxx"
+#include "colmgr.hxx"
+
+
+/*-----------------------------------------------------------------------
+    Beschreibung: Uebernahme der aktualisierten Werte aus dem Set
+ -----------------------------------------------------------------------*/
+
+
+void SwColExample::UpdateExample( const SfxItemSet& rSet, SwColMgr* pMgr )
+{
+    pColMgr = pMgr;
+    const SvxPageItem* pPage = 0;
+    SfxItemPool* pPool = rSet.GetPool();
+    USHORT nWhich = pPool->GetWhich( SID_ATTR_PAGE );
+
+    if ( rSet.GetItemState( nWhich, FALSE ) == SFX_ITEM_SET )
+    {
+        // Ausrichtung
+        pPage = (const SvxPageItem*)&rSet.Get( nWhich );
+
+        if ( pPage )
+            SetUsage( pPage->GetPageUsage() );
+    }
+
+    nWhich = pPool->GetWhich( SID_ATTR_PAGE_SIZE );
+
+    if ( rSet.GetItemState( nWhich, FALSE ) == SFX_ITEM_SET )
+    {
+        // Orientation und Size aus dem PageItem
+        const SvxSizeItem& rSize = (const SvxSizeItem&)rSet.Get( nWhich );
+        Size aSize( rSize.GetSize() );
+        SetSize( aSize );
+    }
+    nWhich = RES_LR_SPACE;
+    if ( rSet.GetItemState( nWhich, FALSE ) == SFX_ITEM_SET )
+    {
+        // linken und rechten Rand einstellen
+        const SvxLRSpaceItem& rLRSpace = (const SvxLRSpaceItem&)rSet.Get( nWhich );
+
+        SetLeft( rLRSpace.GetLeft() );
+        SetRight( rLRSpace.GetRight() );
+    }
+    else
+    {
+        SetLeft( 0 );
+        SetRight( 0 );
+    }
+
+    nWhich = RES_UL_SPACE;
+
+    if ( rSet.GetItemState( nWhich, FALSE ) == SFX_ITEM_SET )
+    {
+        // oberen und unteren Rand einstellen
+        const SvxULSpaceItem& rULSpace = (const SvxULSpaceItem&)rSet.Get( nWhich );
+
+        SetTop( rULSpace.GetUpper() );
+        SetBottom( rULSpace.GetLower() );
+    }
+    else
+    {
+        SetTop( 0 );
+        SetBottom( 0 );
+    }
+
+
+    // Kopfzeilen-Attribute auswerten
+    const SfxPoolItem* pItem;
+    if( SFX_ITEM_SET == rSet.GetItemState( pPool->GetWhich( SID_ATTR_PAGE_HEADERSET),
+            FALSE, &pItem ) )
+    {
+        const SfxItemSet& rHeaderSet = ((SvxSetItem*)pItem)->GetItemSet();
+        const SfxBoolItem& rHeaderOn =
+            (const SfxBoolItem&)rHeaderSet.Get( pPool->GetWhich( SID_ATTR_PAGE_ON ) );
+
+        if ( rHeaderOn.GetValue() )
+        {
+            const SvxSizeItem& rSize =
+                (const SvxSizeItem&)rHeaderSet.Get(pPool->GetWhich(SID_ATTR_PAGE_SIZE));
+
+            const SvxULSpaceItem& rUL = (const SvxULSpaceItem&)rHeaderSet.Get(
+                                        pPool->GetWhich(SID_ATTR_ULSPACE));
+            const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&)rHeaderSet.Get(
+                                        pPool->GetWhich(SID_ATTR_LRSPACE));
+
+            SetHdHeight( rSize.GetSize().Height() - rUL.GetLower());
+            SetHdDist( rUL.GetLower() );
+            SetHdLeft( rLR.GetLeft() );
+            SetHdRight( rLR.GetRight() );
+            SetHeader( TRUE );
+        }
+        else
+            SetHeader( FALSE );
+    }
+
+    if( SFX_ITEM_SET == rSet.GetItemState( pPool->GetWhich( SID_ATTR_PAGE_FOOTERSET),
+            FALSE, &pItem ) )
+    {
+        const SfxItemSet& rFooterSet = ((SvxSetItem*)pItem)->GetItemSet();
+        const SfxBoolItem& rFooterOn =
+            (const SfxBoolItem&)rFooterSet.Get( SID_ATTR_PAGE_ON );
+
+        if ( rFooterOn.GetValue() )
+        {
+            const SvxSizeItem& rSize =
+                (const SvxSizeItem&)rFooterSet.Get( pPool->GetWhich( SID_ATTR_PAGE_SIZE ) );
+
+            const SvxULSpaceItem& rUL = (const SvxULSpaceItem&)rFooterSet.Get(
+                                        pPool->GetWhich( SID_ATTR_ULSPACE ) );
+            const SvxLRSpaceItem& rLR = (const SvxLRSpaceItem&)rFooterSet.Get(
+                                        pPool->GetWhich( SID_ATTR_LRSPACE ) );
+
+            SetFtHeight( rSize.GetSize().Height() - rUL.GetUpper());
+            SetFtDist( rUL.GetUpper() );
+            SetFtLeft( rLR.GetLeft() );
+            SetFtRight( rLR.GetRight() );
+            SetFooter( TRUE );
+        }
+        else
+            SetFooter( FALSE );
+    }
+
+    Invalidate();
+}
+/*-----------------------------------------------------------------------
+    Beschreibung:
+ -----------------------------------------------------------------------*/
+
+
+void SwColExample::DrawPage( const Point& rOrg,
+                            const BOOL bSecond,
+                            const BOOL bEnabled )
+{
+    SvxPageWindow::DrawPage( rOrg, bSecond, bEnabled );
+    if( pColMgr && pColMgr->GetCount() >1 )
+    {
+//      SetPen( Pen( PEN_DOT ) );
+
+        long nL = GetLeft();
+        long nR = GetRight();
+
+        if ( GetUsage() == SVX_PAGE_MIRROR && !bSecond )
+        {
+            // fuer gespiegelt drehen
+            nL = GetRight();
+            nR = GetLeft();
+        }
+
+        SetFillColor( Color( COL_LIGHTGRAY ) );
+        Rectangle aRect;
+        aRect.Right() = rOrg.X() + GetSize().Width() - nR;
+        aRect.Left()  = rOrg.X() + nL;
+        aRect.Top()   = rOrg.Y() + GetTop()
+                        + GetHdHeight() + GetHdDist();
+        aRect.Bottom()= rOrg.Y() + GetSize().Height() - GetBottom()
+                        - GetFtHeight() - GetFtDist();
+        DrawRect(aRect);
+
+        SetFillColor( Color( COL_WHITE ) );
+        USHORT nColumnCount = pColMgr->GetCount();
+        for(USHORT i = 0; i < nColumnCount; i++)
+        {
+            aRect.Right() = aRect.Left() + pColMgr->GetColWidth( i );
+            DrawRect(aRect);
+            if(i < nColumnCount - 1)
+                aRect.Left() = aRect.Right() + pColMgr->GetGutterWidth(i);
+        }
+        if(pColMgr->HasLine())
+        {
+//          SetPen( Pen ( PEN_SOLID ) );
+            Point aUp( rOrg.X() + nL, rOrg.Y() + GetTop() );
+            Point aDown( rOrg.X() + nL, rOrg.Y() + GetSize().Height()
+                        - GetBottom() - GetFtHeight() - GetFtDist() );
+
+            if( pColMgr->GetLineHeightPercent() != 100 )
+            {
+                long nLength = aDown.Y() - aUp.Y();
+                nLength -= nLength * pColMgr->GetLineHeightPercent() / 100;
+                switch(pColMgr->GetAdjust())
+                {
+                    case COLADJ_BOTTOM: aUp.Y() += nLength; break;
+                    case COLADJ_TOP: aDown.Y() -= nLength; break;
+                    case COLADJ_CENTER:
+                          aUp.Y() += nLength / 2;
+                          aDown.Y() -= nLength / 2;
+                    break;
+                }
+            }
+
+            int nDist;
+            for( i = 0; i < nColumnCount -  1; i++)
+            {
+                int nGutter = pColMgr->GetGutterWidth(i);
+                nDist = pColMgr->GetColWidth( i ) + nGutter;
+                nDist -= (i == 0) ?
+                    nGutter/2 :
+                        0;
+                aUp.X() += nDist;
+                aDown.X() += nDist;
+                DrawLine( aUp, aDown );
+
+            }
+        }
+    }
+}
+
+
+
+SwColExample::SwColExample(Window* pPar, const ResId& rResId ) :
+                                SvxPageWindow(pPar, rResId )
+{
+    SetSize(Size(11907, 16433));// DIN A4
+}
+
+/*-----------------25.10.96 09.15-------------------
+
+--------------------------------------------------*/
+
+
+SwColumnOnlyExample::SwColumnOnlyExample( Window* pParent, const ResId& rResId) :
+    Window(pParent, rResId),
+    aFrmSize(1,1),
+    nDistance(0)
+{
+    SetMapMode( MapMode( MAP_TWIP ) );
+    aWinSize = GetOutputSizePixel();
+    aWinSize.Height() -= 4;
+    aWinSize.Width() -= 4;
+
+    aWinSize = PixelToLogic( aWinSize );
+
+}
+
+/*-----------------25.10.96 09.16-------------------
+
+--------------------------------------------------*/
+
+
+void SwColumnOnlyExample::Paint( const Rectangle& rRect )
+{
+//      Pen aSolidPen(PEN_SOLID);
+        long nWidth = aFrmSize.Width();
+        long nHeight = aFrmSize.Height();
+        Fraction aXScale( aWinSize.Width(),
+                            max( nWidth + nWidth / 8, 1 ) );
+        Fraction aYScale( aWinSize.Height(), max( nHeight, 1 ) );
+        MapMode aMapMode( GetMapMode() );
+        aMapMode.SetScaleX( aXScale );
+        aMapMode.SetScaleY( aYScale );
+        SetMapMode( aMapMode );
+
+        Size aLogSize(PixelToLogic(GetOutputSizePixel()));
+        Point aTL(  (aLogSize.Width() - aFrmSize.Width()) / 2,
+                    (aLogSize.Height() - aFrmSize.Height()) / 2);
+        Rectangle aRect(aTL, aFrmSize);
+
+        SetFillColor( Color( COL_WHITE ) );
+//      SetPen(aSolidPen);
+        DrawRect(aRect);
+
+        Size aInside(aFrmSize.Width() - nDistance, aFrmSize.Height() - nDistance);
+        long nDist2 = nDistance / 2;
+        aTL.X() += nDist2;
+        aTL.Y() += nDist2;
+        Rectangle aInsRect(aTL, aInside);
+        DrawRect(aInsRect);
+
+        SetFillColor(Color( COL_LIGHTGRAY ) );
+
+        //Spaltentrenner?
+        long nLength = aLogSize.Height() - 2 * aTL.Y();
+        Point aUp( aTL );
+        Point aDown( aTL.X(), nLength );
+        BOOL bLines = FALSE;
+        if(aCols.GetLineAdj() != COLADJ_NONE)
+        {
+            bLines = TRUE;
+
+            USHORT nPercent = aCols.GetLineHeight();
+            if( nPercent != 100 )
+            {
+                nLength -= nLength * nPercent / 100;
+                switch(aCols.GetLineAdj())
+                {
+                    case COLADJ_BOTTOM: aUp.Y() += nLength; break;
+                    case COLADJ_TOP: aDown.Y() -= nLength; break;
+                    case COLADJ_CENTER:
+                          aUp.Y() += nLength / 2;
+                          aDown.Y() -= nLength / 2;
+                    break;
+                }
+            }
+
+        }
+
+        const SwColumns& rCols = aCols.GetColumns();
+        USHORT nColCount = rCols.Count();
+//      SetPen(Pen(PEN_DOT));
+        if( !nColCount)
+            DrawRect(aRect);
+        else
+        {
+            Rectangle aFrmRect(aTL, aInside);
+            long nSum = aTL.X();
+            for(USHORT i = 0; i < nColCount; i++)
+            {
+                SwColumn* pCol = rCols[i];
+                aFrmRect.Left()    = nSum + pCol->GetLeft();//nSum + pCol->GetLeft() + aTL.X();
+                nSum              += pCol->GetWishWidth();
+                aFrmRect.Right()   = nSum - pCol->GetRight();
+                DrawRect(aFrmRect);
+            }
+//          SetPen( aSolidPen );
+            if(bLines )
+            {
+                nSum = aTL.X();
+                for(USHORT i = 0; i < nColCount - 1; i++)
+                {
+                    nSum += rCols[i]->GetWishWidth();
+                    aUp.X() = nSum;
+                    aDown.X() = nSum;
+                    DrawLine(aUp, aDown);
+                }
+            }
+        }
+}
+
+/*-----------------25.10.96 12.05-------------------
+
+--------------------------------------------------*/
+
+
+void SwColumnOnlyExample::SetFrameSize(const Size& rS, long nDist)
+{
+    aFrmSize  = rS;
+    nDistance = 2 * nDist;
+    ::FitToActualSize(aCols, (USHORT)aFrmSize.Width());
+}
+
+/*-----------------25.02.94 21:22-------------------
+   $Log: not supported by cvs2svn $
+   Revision 1.26  2000/09/18 16:05:32  willem.vandorp
+   OpenOffice header added.
+
+   Revision 1.25  2000/03/03 15:17:01  os
+   StarView remainders removed
+
+   Revision 1.24  1998/04/28 09:28:32  OS
+   Abstand nur fuer existierende Spalten erfragen
+
+
+      Rev 1.23   28 Apr 1998 11:28:32   OS
+   Abstand nur fuer existierende Spalten erfragen
+
+      Rev 1.22   16 Apr 1998 13:09:28   OS
+   Spaltenabstand fuer Seitenbeispiel richtig #49516#
+
+      Rev 1.21   28 Nov 1997 19:40:38   MA
+   includes
+
+      Rev 1.20   24 Nov 1997 17:40:12   MA
+   include
+
+      Rev 1.19   03 Nov 1997 13:19:44   MA
+   precomp entfernt
+
+      Rev 1.18   15 Aug 1997 12:15:24   OS
+   chartar/frmatr/txtatr aufgeteilt
+
+      Rev 1.17   12 Aug 1997 15:58:08   OS
+   frmitems/textitem/paraitem aufgeteilt
+
+      Rev 1.16   07 Aug 1997 14:59:08   OM
+   Headerfile-Umstellung
+
+      Rev 1.15   23 Apr 1997 11:08:48   OS
+   ResId const
+
+      Rev 1.14   21 Nov 1996 11:53:34   OS
+   Umrandungsabstand mit anzeigen
+
+      Rev 1.13   08 Nov 1996 14:07:54   OS
+   ohne Spalten mit richtigem Hintergrund painten
+
+      Rev 1.12   25 Oct 1996 14:56:56   OS
+   neues Spaltenbeispiel ohne Seite
+
+      Rev 1.11   28 Aug 1996 11:52:54   OS
+   includes
+
+      Rev 1.10   27 Mar 1996 16:02:56   OS
+   Hoehe Kopf-/Fusszeilen richtig einstellen
+
+      Rev 1.9   22 Mar 1996 14:20:58   MH
+   add: include pageitem.hxx
+
+      Rev 1.8   24 Nov 1995 16:58:10   OM
+   PCH->PRECOMPILED
+
+      Rev 1.7   21 Nov 1995 08:16:04   OS
+   +pragma
+
+      Rev 1.6   21 Nov 1995 08:00:48   OS
+   Itemsate auf _SET pruefen, Seitengroesse init.
+
+      Rev 1.5   17 Oct 1995 15:00:08   MA
+   fix: SEXPORT'iert
+
+      Rev 1.4   22 Aug 1995 09:10:02   MA
+   svxitems-header entfernt
+
+      Rev 1.3   07 Aug 1995 18:51:24   OS
+   Trennlinien mit einzeichnen
+
+      Rev 1.2   02 Aug 1995 17:47:50   OS
+   Seitenspaltenbeispiel implementiert
+
+      Rev 1.1   11 Jul 1995 15:42:06   OS
+   Beispielfenster jetzt vom SvxPageWindow abgeleitet
+
+      Rev 1.0   20 Apr 1995 17:38:02   OS
+   Initial revision.
+
+--------------------------------------------------*/
+
+