summaryrefslogtreecommitdiff
path: root/ChangeLog
diff options
context:
space:
mode:
Diffstat (limited to 'ChangeLog')
-rw-r--r--ChangeLog374
1 files changed, 372 insertions, 2 deletions
diff --git a/ChangeLog b/ChangeLog
index e4da387d05..d9c63b1090 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,9 +1,379 @@
+=== release 1.5.91 ===
+
+2015-09-18 Sebastian Dröge <slomo@coaxion.net>
+
+ * configure.ac:
+ releasing 1.5.91
+
+2015-09-18 11:50:31 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/zh_CN.po:
+ po: Update translations
+
+2015-09-17 10:50:01 +0900 Eunhae Choi <eunhae1.choi@samsung.com>
+
+ * gst/avi/gstavidemux.c:
+ avidemux: Fix taglist leak
+ gst_tag_list_insert() does not take ownership of the inserted taglist.
+ https://bugzilla.gnome.org/show_bug.cgi?id=755138
+
+2015-09-16 07:05:36 +1000 Jan Schmidt <jan@centricular.com>
+
+ * gst/audioparsers/gstaacparse.c:
+ aacparse: Skip LOAS AAC until a valid config is seen.
+ It's normal when dropping into the middle of a stream to
+ not always have the config available immediately, so skip LOAS
+ until a valid config is seen without either setting invalid
+ caps or erroring out.
+ https://bugzilla.gnome.org/show_bug.cgi?id=751386
+
+2015-09-13 15:41:38 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * gst/rtpmanager/gstrtpjitterbuffer.c:
+ rtpjitterbuffer: reset just a bit more upon flush_stop
+
+2015-09-13 15:40:09 +0200 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * gst/rtpmanager/gstrtpjitterbuffer.c:
+ rtpjitterbuffer: remove dead struct member
+
+2015-09-11 17:09:28 +0900 Vineeth TM <vineeth.tm@samsung.com>
+
+ * gst/udp/gstmultiudpsink.c:
+ multiudpsink: fix GError memory leak when hostname resolution fails
+ https://bugzilla.gnome.org/show_bug.cgi?id=754869
+
+2015-09-10 15:26:54 -0300 Thiago Santos <thiagoss@osg.samsung.com>
+
+ * gst/matroska/ebml-write.c:
+ matroskamux: drop HEADER flag from output buffers
+ Drop HEADER flag from output buffers if they are not indeed
+ headers.
+ Fixes resending of headers in tcp connection handling
+ https://bugzilla.gnome.org/show_bug.cgi?id=754768
+
+2015-09-10 16:00:50 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/matroska/ebml-write.c:
+ matroskamux: fix matroskamux ! matroskademux
+ Don't carry over DISCONT flags from the input buffers to the
+ output buffer, or the demuxer might reset its state when it
+ receives the first data buffer just after parsing the simple
+ block header, and then expect sane data to follow.
+ Fixes matroskamux ! demux erroring out.
+ https://bugzilla.gnome.org/show_bug.cgi?id=754768
+ https://bugzilla.gnome.org/show_bug.cgi?id=657805
+
+2015-09-09 12:51:40 -0700 Martin Kelly <martin@surround.io>
+
+ * gst/rtsp/README:
+ rtsp: fix small README typo
+ https://bugzilla.gnome.org/show_bug.cgi?id=754807
+
+2015-09-04 19:45:37 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/audioparsers/gstwavpackparse.c:
+ wavpackparse: set both pts and dts so baseparse doesn't make up wrong dts after seeks
+ https://bugzilla.gnome.org/show_bug.cgi?id=752106
+
+2015-09-04 19:34:41 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * gst/audioparsers/gstflacparse.c:
+ flacparse: set both pts and dts so baseparse doesn't make up wrong dts after a seek
+ flac contains the sample offset in the frame header, so after a seek
+ without index flacparse will know the exact position we landed on and
+ timestamp buffers accordingly. It only set the pts though, which means
+ the baseparse-set dts which was set to the seek position prevails, and
+ since the seek was based on an estimate, there's likely a discrepancy
+ between where we wanted to land and where we did land, so from here on
+ that dts/pts difference will be maintained, with dts possibly multiple
+ seconds ahead of pts, which is just wrong. The easiest way to fix this
+ is to just set both pts and dts based on the sample offset, but perhaps
+ parsed audio should just not have dts set at all.
+ https://bugzilla.gnome.org/show_bug.cgi?id=752106
+
+2015-09-06 16:33:02 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * docs/plugins/gst-plugins-good-plugins.args:
+ * docs/plugins/gst-plugins-good-plugins.signals:
+ docs: remove properties and signals that no longer exist
+ https://bugzilla.gnome.org/show_bug.cgi?id=726443
+
+2013-10-11 15:13:00 +0000 George Chriss <gschriss@gmail.com>
+
+ * gst/flv/gstflvmux.c:
+ flvmux: Make the element count in arrays not include end
+ One-line removal of tags_written++
+ This should fix rtmp output to crtmpserver, and hopefully
+ noone is expecting that the element count includes the end
+ element, as different bits of documentation say different
+ things about whether it should or not.
+ https://bugzilla.gnome.org/show_bug.cgi?id=661624
+
+2015-07-30 00:59:15 +1000 Jan Schmidt <jan@centricular.com>
+
+ * gst/flv/gstflvmux.c:
+ * gst/flv/gstflvmux.h:
+ flvmux: Store incoming bitrate tags and send in the metadata
+ Apparently the Microsoft Azure RTMP server requires that the
+ videodatarate and audiodatarate metadata be provided, so
+ set those, even if it's to 0. Use the actual input bitrate
+ tags if available.
+
+2015-09-04 00:06:29 +1000 Jan Schmidt <jan@centricular.com>
+
+ * gst/rtsp/gstrtspsrc.c:
+ rtspsrc: Don't parse key data more than needed.
+ When an auxilliary streams are present in the SDP media,
+ there's no need to re-parse the SDP attributes multiple
+ times.
+
+2015-09-03 20:56:55 +1000 Jan Schmidt <jan@centricular.com>
+
+ * gst/rtsp/gstrtspsrc.c:
+ rtspsrc: Fix SRTP + RTX, auth access, a leak, and an invalid memory access.
+ In parse_keymgmt(), don't mutate the input string that's been passed
+ as const, especially since we might need the original value again if
+ the same key info applies to multiple streams (RTX, for example).
+ When a resource is 404, and we have auth info - retry with the auth
+ info the same as if we had receive unauthorised, in case the resource
+ isn't even visible until credentials are supplied.
+ Fix a memory leak handling Mikey data.
+ When generating a random keystring, don't overrun the 30 byte
+ buffer by generating 32 bytes into it.
+
+2015-09-04 15:18:05 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/udp/gstudpsrc.c:
+ udpsrc: Fix build with GLib < 2.44
+ G_IO_ERROR_CONNECTION_CLOSED was added in 2.44.
+
+2015-09-04 12:01:52 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/udp/gstudpsrc.c:
+ udpsrc: Ignore G_IO_ERROR_CONNECTION_CLOSED when receiving data
+ This happens on Windows if we use the same socket for sending packets,
+ and the remote sends ICMP port/host unreachable messages.
+ https://bugzilla.gnome.org/show_bug.cgi?id=754534
+
+2015-09-02 21:12:41 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/rtp/gstrtptheoradepay.c:
+ * gst/rtp/gstrtpvorbisdepay.c:
+ rtpvorbis/theoradepay: Fix handling of fragmented packets
+ This was broken in b1089fb520 by not considering the full packet length of a
+ fragmented packet but only the length of the first one.
+ https://bugzilla.gnome.org/show_bug.cgi?id=754417
+
+2015-09-01 15:39:22 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * gst/dtmf/gstdtmfsrc.c:
+ * gst/dtmf/gstrtpdtmfsrc.c:
+ dtmfsrc: Reply to latency query
+
+2015-08-31 16:42:30 -0400 Olivier Crête <olivier.crete@collabora.com>
+
+ * tests/check/elements/rtpsession.c:
+ tests: Fix rtpsession test failure
+ The time of the first RTCP packet is semi-random, so
+ sometimes it was produced before enough packets from
+ the second SSRC were received. First drop queued RTCP
+ packets, then advance the clock enough to ensure
+ that at least one new RTCP packet is produced.
+ https://bugzilla.gnome.org/show_bug.cgi?id=750731
+
+2015-08-31 13:56:04 +0200 Stefan Sauer <ensonic@users.sf.net>
+
+ * tests/check/elements/level.c:
+ level: improve the test for multi-channel mode
+ Change the test to verify the read-index for multiple messages per buffer.
+ See https://bugzilla.gnome.org/show_bug.cgi?id=754144
+
+2015-08-31 12:46:52 +0200 Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
+
+ * gst/matroska/matroska-demux.c:
+ matroskademux: Align raw video frames to 32 bytes
+ Outputting unaligned video frames causes videoscale et al to
+ crash when attempting SIMD-accelerated conversion.
+ https://bugzilla.gnome.org/show_bug.cgi?id=736965
+
+2015-08-26 23:16:46 +0200 Stefan Sauer <ensonic@users.sf.net>
+
+ * gst/level/gstlevel.c:
+ level: fix level calculations for mutliple channels
+ This was broken with 7b90bf32150897a141a29a12ecab555d8c5b7fab.
+
+2015-08-27 10:28:55 +0530 Ravi Kiran K N <ravi.kiran@samsung.com>
+
+ * gst/smpte/gstsmpte.c:
+ smpte: Fix memory leak
+ In gst_smpte_collected(), check upfront if input formats are same
+ or not. This avoids allocation of in1 and in2 buffers and
+ subsequent memory leak when input formats do not match.
+ https://bugzilla.gnome.org/show_bug.cgi?id=754153
+
+2015-08-21 11:52:19 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * tests/check/elements/souphttpsrc.c:
+ tests: souphttpsrc: don't try to connect to dead radio server
+
+2015-08-21 16:29:16 +0900 Vineeth TM <vineeth.tm@samsung.com>
+
+ * gst/rtsp/gstrtspsrc.c:
+ rtspsrc: Trivial fix to check correct condition
+ When checking for describe method, because of missing parentheses, wrong
+ condition is being checked, which will result in wrong behavior.
+ https://bugzilla.gnome.org/show_bug.cgi?id=753912
+
+2015-08-21 13:19:02 +0900 Vineeth TM <vineeth.tm@samsung.com>
+
+ * gst/matroska/matroska-read-common.c:
+ matroska: read: fix tag list memory leak
+ gst_toc_entry_merge_tags makes a new ref of the taglist, so it should
+ be unref'ed as soon as the tags are merged to the tocentry
+ https://bugzilla.gnome.org/show_bug.cgi?id=753904
+
+2015-08-21 12:20:59 +0900 Vineeth TM <vineeth.tm@samsung.com>
+
+ * ext/wavpack/gstwavpackdec.c:
+ wavpackdec: fix taglist memory leak
+ When passing the taglist to gst_audio_decoder_merge_tags, the reference is increased
+ by audiodecoder and the caller should free the taglist being passed.
+ https://bugzilla.gnome.org/show_bug.cgi?id=753903
+
+2015-08-20 14:45:33 +0200 Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com>
+
+ * sys/v4l2/gstv4l2transform.c:
+ v4l2transform: fix pad closing
+ Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com>
+ https://bugzilla.gnome.org/show_bug.cgi?id=753875
+
=== release 1.5.90 ===
-2015-08-19 Sebastian Dröge <slomo@coaxion.net>
+2015-08-19 13:29:53 +0300 Sebastian Dröge <sebastian@centricular.com>
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
* configure.ac:
- releasing 1.5.90
+ * docs/plugins/gst-plugins-good-plugins.args:
+ * docs/plugins/gst-plugins-good-plugins.hierarchy:
+ * docs/plugins/gst-plugins-good-plugins.interfaces:
+ * docs/plugins/gst-plugins-good-plugins.signals:
+ * docs/plugins/inspect/plugin-1394.xml:
+ * docs/plugins/inspect/plugin-aasink.xml:
+ * docs/plugins/inspect/plugin-alaw.xml:
+ * docs/plugins/inspect/plugin-alpha.xml:
+ * docs/plugins/inspect/plugin-alphacolor.xml:
+ * docs/plugins/inspect/plugin-apetag.xml:
+ * docs/plugins/inspect/plugin-audiofx.xml:
+ * docs/plugins/inspect/plugin-audioparsers.xml:
+ * docs/plugins/inspect/plugin-auparse.xml:
+ * docs/plugins/inspect/plugin-autodetect.xml:
+ * docs/plugins/inspect/plugin-avi.xml:
+ * docs/plugins/inspect/plugin-cacasink.xml:
+ * docs/plugins/inspect/plugin-cairo.xml:
+ * docs/plugins/inspect/plugin-cutter.xml:
+ * docs/plugins/inspect/plugin-debug.xml:
+ * docs/plugins/inspect/plugin-deinterlace.xml:
+ * docs/plugins/inspect/plugin-dtmf.xml:
+ * docs/plugins/inspect/plugin-dv.xml:
+ * docs/plugins/inspect/plugin-effectv.xml:
+ * docs/plugins/inspect/plugin-equalizer.xml:
+ * docs/plugins/inspect/plugin-flac.xml:
+ * docs/plugins/inspect/plugin-flv.xml:
+ * docs/plugins/inspect/plugin-flxdec.xml:
+ * docs/plugins/inspect/plugin-gdkpixbuf.xml:
+ * docs/plugins/inspect/plugin-goom.xml:
+ * docs/plugins/inspect/plugin-goom2k1.xml:
+ * docs/plugins/inspect/plugin-icydemux.xml:
+ * docs/plugins/inspect/plugin-id3demux.xml:
+ * docs/plugins/inspect/plugin-imagefreeze.xml:
+ * docs/plugins/inspect/plugin-interleave.xml:
+ * docs/plugins/inspect/plugin-isomp4.xml:
+ * docs/plugins/inspect/plugin-jack.xml:
+ * docs/plugins/inspect/plugin-jpeg.xml:
+ * docs/plugins/inspect/plugin-level.xml:
+ * docs/plugins/inspect/plugin-matroska.xml:
+ * docs/plugins/inspect/plugin-mulaw.xml:
+ * docs/plugins/inspect/plugin-multifile.xml:
+ * docs/plugins/inspect/plugin-multipart.xml:
+ * docs/plugins/inspect/plugin-navigationtest.xml:
+ * docs/plugins/inspect/plugin-oss4.xml:
+ * docs/plugins/inspect/plugin-ossaudio.xml:
+ * docs/plugins/inspect/plugin-png.xml:
+ * docs/plugins/inspect/plugin-pulseaudio.xml:
+ * docs/plugins/inspect/plugin-replaygain.xml:
+ * docs/plugins/inspect/plugin-rtp.xml:
+ * docs/plugins/inspect/plugin-rtpmanager.xml:
+ * docs/plugins/inspect/plugin-rtsp.xml:
+ * docs/plugins/inspect/plugin-shapewipe.xml:
+ * docs/plugins/inspect/plugin-shout2send.xml:
+ * docs/plugins/inspect/plugin-smpte.xml:
+ * docs/plugins/inspect/plugin-soup.xml:
+ * docs/plugins/inspect/plugin-spectrum.xml:
+ * docs/plugins/inspect/plugin-speex.xml:
+ * docs/plugins/inspect/plugin-taglib.xml:
+ * docs/plugins/inspect/plugin-udp.xml:
+ * docs/plugins/inspect/plugin-video4linux2.xml:
+ * docs/plugins/inspect/plugin-videobox.xml:
+ * docs/plugins/inspect/plugin-videocrop.xml:
+ * docs/plugins/inspect/plugin-videofilter.xml:
+ * docs/plugins/inspect/plugin-videomixer.xml:
+ * docs/plugins/inspect/plugin-vpx.xml:
+ * docs/plugins/inspect/plugin-wavenc.xml:
+ * docs/plugins/inspect/plugin-wavpack.xml:
+ * docs/plugins/inspect/plugin-wavparse.xml:
+ * docs/plugins/inspect/plugin-ximagesrc.xml:
+ * docs/plugins/inspect/plugin-y4menc.xml:
+ * gst-plugins-good.doap:
+ * win32/common/config.h:
+ Release 1.5.90
+
+2015-08-19 12:47:42 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/lv.po:
+ * po/mt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/or.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_HK.po:
+ * po/zh_TW.po:
+ Update .po files
2015-08-19 11:29:55 +0300 Sebastian Dröge <sebastian@centricular.com>