Release 1.2.31.2.3

8 files changed, 327 insertions, 22 deletions

diff --git a/ChangeLog b/ChangeLog
index 5a72408b59..2d725fb585 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,9 +1,302 @@
+=== release 1.2.3 ===
+
+2014-02-08  Sebastian Dröge <slomo@coaxion.net>
+
+	* configure.ac:
+	  releasing 1.2.3
+
+2014-01-24 19:19:08 +0100  Arnaud Vrac <avrac@freebox.fr>
+
+	* plugins/elements/gstmultiqueue.c:
+	  multiqueue: do not reduce single queue below current level
+	  When the single queue size was just bumped by 1 to allow more buffers to
+	  be added, the buffers limit could be reduced to the current level when
+	  setting the max-size-buffers property. This would result in a stall
+	  since the queue would not grow anymore at this point.
+	  Prevent this by not reducing a single queue size below the current
+	  number of buffers + 1.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=712597
+
+2014-02-04 16:20:08 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* po/id.po:
+	* po/nl.po:
+	* po/pt_BR.po:
+	* po/sk.po:
+	* po/sr.po:
+	  po: Update translations
+
+2014-01-17 22:53:01 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* gst/gstpad.c:
+	  pad: fix sticky event leak after sticky_events_foreach
+	  events_foreach adds an extra ref when giving the event to the
+	  user function. In case it was unrefed by the user, this extra ref
+	  disappeared, but events_foreach still should unref again to
+	  lose its own ref before removing the event from the array.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=722467
+
+2014-01-15 00:12:26 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* plugins/elements/gstmultiqueue.c:
+	  multiqueue: prevent buffering forever with playbin
+	  When prerolling/buffering, multiqueue has its buffers limit set
+	  to 0, this means it can take an infinite amount of buffers.
+	  When prerolling/buffering finishes, its limit is set back to 5, but
+	  only if the current level is lower than 5. It should (almost) never be
+	  and this will cause prerolling/buffering to need to wait to reach the
+	  hard bytes and time limits, which are much higher.
+	  This can lead to a very long startup time. This patch fixes this
+	  by setting the single queues to the max(current, new_value) instead
+	  of simply ignoring the new value and letting it as infinite(0)
+	  https://bugzilla.gnome.org/show_bug.cgi?id=712597
+
+2014-01-15 11:12:08 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/gstsegment.c:
+	  segment: gst_segment_offset_running_time() will be available in 1.2.3
+
+2014-01-08 15:47:10 +0100  Wim Taymans <wtaymans@redhat.com>
+
+	* tests/check/gst/gstsegment.c:
+	  tests: improve check, also check stream-time
+
+2014-01-08 15:31:28 +0100  Wim Taymans <wtaymans@redhat.com>
+
+	* tests/check/gst/gstsegment.c:
+	  tests: add unit test for segment _offset_running_time()
+	  Add a unit test to check that positive and negative offsets are applied
+	  correctly in various cases.
+
+2014-01-08 14:57:04 +0100  Wim Taymans <wtaymans@redhat.com>
+
+	* gst/gstpad.c:
+	  pad: use new segment offset method to apply the offset
+	  Fixes https://bugzilla.gnome.org/show_bug.cgi?id=721422
+
+2014-01-08 14:54:47 +0100  Wim Taymans <wtaymans@redhat.com>
+
+	* gst/gstsegment.c:
+	* gst/gstsegment.h:
+	* win32/common/libgstreamer.def:
+	  segment: add method to offset the segment running-time
+	  Add a method that can apply an offset to the calculated running-time of
+	  a segment.
+
+2014-01-08 16:28:54 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* libs/gst/base/gstbaseparse.c:
+	  baseparse: do not ignore TIME segments
+	  TIME segments are being ignored and a standard initialized
+	  segment is used instead. This causes issues as not properly detecting
+	  reverse playback or not cliping output based on the segment.
+	  This seems to be a regression from one of the GstSegment/GstEvent
+	  redesigns on the 0.10 -> 1.0 transition
+
+2014-01-08 15:23:00 +0100  Wim Taymans <wtaymans@redhat.com>
+
+	* gst/gstsegment.c:
+	  segment: take offset into account in _to_position()
+	  Take the offset into account when converting between running-time and
+	  segment positions.
+
+2014-01-08 14:52:04 +0100  Wim Taymans <wtaymans@redhat.com>
+
+	* libs/gst/base/gstcollectpads.c:
+	  collectpads: take offset into account for expected segment position
+	  The firt valid segment position is start + offset.
+	  Also add some more debug and a FIXME
+
+2014-01-13 08:37:37 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* tests/check/libs/baseparse.c:
+	  tests: baseparse: add test for reverse playback on passthrough
+	  Baseparse stores buffers for reverse playback to push on the next
+	  DISCONT, the issue was that it wouldn't ever check for a discont
+	  on passthrough mode as it skips all real parsing. This test
+	  was create to verify this issue and prevent it from happening again
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721941
+
+2014-01-11 10:49:17 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* tests/check/Makefile.am:
+	* tests/check/libs/.gitignore:
+	* tests/check/libs/baseparse.c:
+	  tests: baseparse: add basic test for baseparse
+	  Just a small test to check that basic playback works
+
+2014-01-10 09:10:06 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* libs/gst/base/gstbaseparse.c:
+	  baseparse: do not accumulate buffers on passthrough mode
+	  If on passthrough during reverse playback, do not accumulate buffers as
+	  baseparse will never check for DISCONT flag to push those buffers.
+	  So just push buffers downstream as if it was forward playback.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721941
+
+2014-01-02 16:22:37 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* libs/gst/base/gstbaseparse.c:
+	  baseparse: remove pending_segment as it was being misused
+	  It wasn't required, instead baseparse was using it to check the media
+	  caps to identify if it was handling audio or video.
+	  The pending_segment was removed and a checked_media boolean
+	  replaced it for a more accurate naming.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721350
+
+2014-01-02 13:43:54 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* libs/gst/base/gstbaseparse.c:
+	  baseparse: push pending events before GAP event
+	  A GAP event is handled as an empty buffer by sinks and they expect
+	  to receive start up events before GAP events (like a segment).
+	  This is important specially if there is a GAP at the beginning of
+	  a stream (before any buffers) so that the segment event can be
+	  pushed downstream before the GAP
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721350
+
+2014-01-02 13:41:25 -0300  Thiago Santos <ts.santos@sisa.samsung.com>
+
+	* libs/gst/base/gstbaseparse.c:
+	  baseparse: refactor pending events pushing
+	  Refactor code repeated 3 times to a common function
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721350
+
+2013-12-04 00:10:36 +0100  Sebastian Rasmussen <sebras@hotmail.com>
+
+	* docs/Makefile.am:
+	* docs/design/Makefile.am:
+	  docs: add missing files for distribution
+	  * add some documentation files in docs/design
+	  * add docs/list-ulink.xsl so check in docs/manual works
+	  Fixes https://bugzilla.gnome.org/show_bug.cgi?id=719814
+
+2014-01-03 11:47:23 +0800  YanpingZhang <zhangyanping210@163.com>
+
+	* plugins/elements/gstmultiqueue.c:
+	  multiqueue: Fix hanging if shut down while handling a serialized query
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721253
+
+2014-01-02 13:34:52 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* tests/check/gst/gstpad.c:
+	  pad: Add unit test for adding/removing blocking probes while a pad is blocked
+	  And make sure that these new probes are actually called if they should
+	  instead of silently blocking the pad forever.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721289
+
+2014-01-02 13:33:20 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/gstpad.c:
+	  pad: Check if new probes need to be called when adding/removing some
+	  This allows blocking a pad, add a new blocking probe, removing
+	  the first probe and then having the second probe called. Which
+	  could then decide that data-flow should actually continue
+	  instead of blocking now.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721289
+
+2014-01-02 11:13:27 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* plugins/elements/gsttee.c:
+	* plugins/elements/gsttee.h:
+	  tee: Remove dyn lock
+	  It was used for pad-alloc in 0.10 but currently is completely unused
+	  and not necessary. All pad access is protected by the tee object lock
+	  and keeping another reference to the current pad.
+
+2014-01-02 11:09:59 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* plugins/elements/gsttee.c:
+	  tee: Keep another ref to our one and only srcpad around while pushing
+	  A pad probe on that pad might otherwise just release the pad, drop
+	  the last reference and cause great misery.
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721300
+
+2013-12-30 19:03:22 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/gstpad.c:
+	  pad: Keep an extra ref of the pad when calling an IDLE probe immediately
+	  The callback might destroy the pad.
+
+2013-12-30 18:44:24 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/gstpad.c:
+	  pad: Only call IDLE probes if we are actually idle
+	  Also only check the data types for non-IDLE probes. When we
+	  are idle, we have no data type obviously.
+	  Previously we were calling IDLE probes during data flow whenever
+	  a non-blocking probe would be called. The pad was usually not idle
+	  at that time.
+
+2013-12-30 10:01:39 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* gst/gstpad.c:
+	  pad: Don't ignore probe callback return value when immediately calling IDLE probe
+	  https://bugzilla.gnome.org/show_bug.cgi?id=721096
+
+2013-12-29 14:06:55 +0000  Pedro Côrte-Real <pedro@pedrocr.net>
+
+	* scripts/git-update.sh:
+	  scripts: git-update.sh: fix for non-master branches
+	  Pull from tracking branch instead of origin/master, so
+	  that this works with e.g. 1.2 as well.
+
 === release 1.2.2 ===
 
-2013-12-26  Sebastian Dröge <slomo@coaxion.net>
+2013-12-26 17:34:18 +0100  Sebastian Dröge <sebastian@centricular.com>
 
+	* ChangeLog:
+	* NEWS:
+	* RELEASE:
 	* configure.ac:
-	  releasing 1.2.2
+	* docs/plugins/inspect/plugin-coreelements.xml:
+	* gstreamer.doap:
+	* win32/common/config.h:
+	* win32/common/gstversion.h:
+	  Release 1.2.2
+
+2013-12-26 17:31:38 +0100  Sebastian Dröge <sebastian@centricular.com>
+
+	* po/af.po:
+	* po/az.po:
+	* po/be.po:
+	* po/bg.po:
+	* po/ca.po:
+	* po/cs.po:
+	* po/da.po:
+	* po/de.po:
+	* po/el.po:
+	* po/en_GB.po:
+	* po/eo.po:
+	* po/es.po:
+	* po/eu.po:
+	* po/fi.po:
+	* po/fr.po:
+	* po/gl.po:
+	* po/hr.po:
+	* po/hu.po:
+	* po/id.po:
+	* po/it.po:
+	* po/ja.po:
+	* po/lt.po:
+	* po/nb.po:
+	* po/nl.po:
+	* po/pl.po:
+	* po/pt_BR.po:
+	* po/ro.po:
+	* po/ru.po:
+	* po/rw.po:
+	* po/sk.po:
+	* po/sl.po:
+	* po/sq.po:
+	* po/sr.po:
+	* po/sv.po:
+	* po/tr.po:
+	* po/uk.po:
+	* po/vi.po:
+	* po/zh_CN.po:
+	* po/zh_TW.po:
+	  Update .po files
 
 2013-12-26 16:44:57 +0100  Sebastian Dröge <sebastian@centricular.com>
 
diff --git a/NEWS b/NEWS
index 0fe7f2d8c5..ec134b1cfb 100644
--- a/NEWS
+++ b/NEWS
@@ -1,2 +1,2 @@
-This is GStreamer 1.2.2
+This is GStreamer 1.2.3
 
diff --git a/RELEASE b/RELEASE
index 27ff2fd186..92a34ceb95 100644
--- a/RELEASE
+++ b/RELEASE
@@ -1,5 +1,5 @@
 
-Release notes for GStreamer 1.2.2
+Release notes for GStreamer 1.2.3
 
 
 The GStreamer team is proud to announce a new bug-fix release
@@ -42,12 +42,15 @@ contains a set of codecs plugins based on libav (formerly gst-ffmpeg)
 
 Bugs fixed in this release
      
-      * 712597 : regression: playbin: buffering of live radio stream never finishes
-      * 719437 : ghostpad: Clearing ghostpad sticky events when switching targets causes regressions
-      * 707230 : flacparse: disregards container timestamps
-      * 712300 : gst-launch: exits with 0 error code even after an error occurred
-      * 714989 : docs/gst-utils: Fix escaping of stream id format
-      * 719575 : multiqueue: improve for adaptive scenario
+      * 712597 : multiqueue: regression: buffering of live radio stream never finishes
+      * 719814 : docs: add missing files for distribution
+      * 721253 : multiqueue: May cause hanging if shut down while handling a serialized query
+      * 721289 : pad: using multiple blocking probes doesn't work as expected
+      * 721300 : tee: Does not protect pad from being destroyed from pad probe during gst_pad_push()
+      * 721350 : baseparse: push pending events before GAP
+      * 721422 : Negative pad offsets don't work
+      * 721941 : baseparse: do not accumulate buffers on passthrough mode
+      * 722467 : pad: Leaks events when iterating sticky events and callback drops event
 
 ==== Download ====
 
@@ -84,12 +87,11 @@ subscribe to the gstreamer-devel list.
         
 Contributors to this release
     
-      * Mark Nauwelaerts
-      * Olivier Crête
-      * Philippe Normand
+      * Arnaud Vrac
+      * Pedro Côrte-Real
       * Sebastian Dröge
       * Sebastian Rasmussen
       * Thiago Santos
-      * Tim-Philipp Müller
       * Wim Taymans
+      * YanpingZhang
  
\ No newline at end of file
diff --git a/configure.ac b/configure.ac
index b0fea85002..0a42d62a70 100644
--- a/configure.ac
+++ b/configure.ac
@@ -4,7 +4,7 @@ dnl initialize autoconf
 dnl when going to/from release please set the nano (fourth number) right !
 dnl releases only do Wall, git and prerelease does Werror too
 dnl
-AC_INIT([GStreamer],[1.2.2],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer])
+AC_INIT([GStreamer],[1.2.3],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer])
 AG_GST_INIT
 
 dnl initialize automake (we require GNU make)
@@ -64,7 +64,7 @@ dnl      1.2.5 => 205
 dnl      1.10.9 (who knows) => 1009
 dnl
 dnl sets GST_LT_LDFLAGS
-AS_LIBTOOL(GST, 202, 0, 202)
+AS_LIBTOOL(GST, 203, 0, 203)
 
 dnl *** autotools stuff ****
 
diff --git a/docs/plugins/inspect/plugin-coreelements.xml b/docs/plugins/inspect/plugin-coreelements.xml
index 622f8084b2..c34673d173 100644
--- a/docs/plugins/inspect/plugin-coreelements.xml
+++ b/docs/plugins/inspect/plugin-coreelements.xml
@@ -3,7 +3,7 @@
   <description>GStreamer core elements</description>
   <filename>../../plugins/elements/.libs/libgstcoreelements.so</filename>
   <basename>libgstcoreelements.so</basename>
-  <version>1.2.2</version>
+  <version>1.2.3</version>
   <license>LGPL</license>
   <source>gstreamer</source>
   <package>GStreamer source release</package>
diff --git a/gstreamer.doap b/gstreamer.doap
index 9fc05c3f42..9b984bd670 100644
--- a/gstreamer.doap
+++ b/gstreamer.doap
@@ -40,6 +40,16 @@ hierarchy, and a set of media-agnostic core elements.
 
  <release>
   <Version>
+   <revision>1.2.3</revision>
+   <branch>1.2</branch>
+   <name></name>
+   <created>2014-02-08</created>
+   <file-release rdf:resource="http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.2.3.tar.xz" />
+  </Version>
+ </release>
+
+ <release>
+  <Version>
    <revision>1.2.2</revision>
    <branch>1.2</branch>
    <name></name>
diff --git a/win32/common/config.h b/win32/common/config.h
index 19ce1688e6..a4be139623 100644
--- a/win32/common/config.h
+++ b/win32/common/config.h
@@ -62,7 +62,7 @@
 #define GST_PACKAGE_ORIGIN "Unknown package origin"
 
 /* GStreamer package release date/time for plugins as YYYY-MM-DD */
-#define GST_PACKAGE_RELEASE_DATETIME "2013-12-26"
+#define GST_PACKAGE_RELEASE_DATETIME "2014-02-08"
 
 /* Define if static plugins should be built */
 #undef GST_PLUGIN_BUILD_STATIC
@@ -354,7 +354,7 @@
 #define PACKAGE_NAME "GStreamer"
 
 /* Define to the full name and version of this package. */
-#define PACKAGE_STRING "GStreamer 1.2.2"
+#define PACKAGE_STRING "GStreamer 1.2.3"
 
 /* Define to the one symbol short name of this package. */
 #define PACKAGE_TARNAME "gstreamer"
@@ -363,7 +363,7 @@
 #undef PACKAGE_URL
 
 /* Define to the version of this package. */
-#define PACKAGE_VERSION "1.2.2"
+#define PACKAGE_VERSION "1.2.3"
 
 /* directory where plugins are located */
 #ifdef _DEBUG
@@ -401,7 +401,7 @@
 #undef USE_POISONING
 
 /* Version number of package */
-#define VERSION "1.2.2"
+#define VERSION "1.2.3"
 
 /* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
    significant byte first (like Motorola and SPARC, unlike Intel). */
diff --git a/win32/common/gstversion.h b/win32/common/gstversion.h
index 667f2469b2..e42fefd079 100644
--- a/win32/common/gstversion.h
+++ b/win32/common/gstversion.h
@@ -57,7 +57,7 @@ G_BEGIN_DECLS
  *
  * The micro version of GStreamer at compile time:
  */
-#define GST_VERSION_MICRO (2)
+#define GST_VERSION_MICRO (3)
 /**
  * GST_VERSION_NANO:
  *