diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 501 |
1 files changed, 434 insertions, 67 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 8a35370da867..05e216524370 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1251,6 +1251,7 @@ bool dp_is_max_vs_reached( static bool perform_post_lt_adj_req_sequence( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings) { enum dc_lane_count lane_count = @@ -1314,6 +1315,7 @@ static bool perform_post_lt_adj_req_sequence( lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings); dc_link_dp_set_drive_settings(link, + link_res, lt_settings); break; } @@ -1388,6 +1390,7 @@ enum link_training_result dp_get_cr_failure(enum dc_lane_count ln_count, static enum link_training_result perform_channel_equalization_sequence( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings, uint32_t offset) { @@ -1410,12 +1413,12 @@ static enum link_training_result perform_channel_equalization_sequence( tr_pattern = DP_TRAINING_PATTERN_SEQUENCE_4; #endif - dp_set_hw_training_pattern(link, tr_pattern, offset); + dp_set_hw_training_pattern(link, link_res, tr_pattern, offset); for (retries_ch_eq = 0; retries_ch_eq <= LINK_TRAINING_MAX_RETRY_COUNT; retries_ch_eq++) { - dp_set_hw_lane_settings(link, lt_settings, offset); + dp_set_hw_lane_settings(link, link_res, lt_settings, offset); /* 2. update DPCD*/ if (!retries_ch_eq) @@ -1479,18 +1482,20 @@ static enum link_training_result perform_channel_equalization_sequence( } static void start_clock_recovery_pattern_early(struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings, uint32_t offset) { DC_LOG_HW_LINK_TRAINING("%s\n GPU sends TPS1. Wait 400us.\n", __func__); - dp_set_hw_training_pattern(link, lt_settings->pattern_for_cr, offset); - dp_set_hw_lane_settings(link, lt_settings, offset); + dp_set_hw_training_pattern(link, link_res, lt_settings->pattern_for_cr, offset); + dp_set_hw_lane_settings(link, link_res, lt_settings, offset); udelay(400); } static enum link_training_result perform_clock_recovery_sequence( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings, uint32_t offset) { @@ -1506,7 +1511,7 @@ static enum link_training_result perform_clock_recovery_sequence( retry_count = 0; if (!link->ctx->dc->work_arounds.lt_early_cr_pattern) - dp_set_hw_training_pattern(link, lt_settings->pattern_for_cr, offset); + dp_set_hw_training_pattern(link, link_res, lt_settings->pattern_for_cr, offset); /* najeeb - The synaptics MST hub can put the LT in * infinite loop by switching the VS @@ -1523,6 +1528,7 @@ static enum link_training_result perform_clock_recovery_sequence( /* 1. call HWSS to set lane settings*/ dp_set_hw_lane_settings( link, + link_res, lt_settings, offset); @@ -1544,9 +1550,6 @@ static enum link_training_result perform_clock_recovery_sequence( /* 3. wait receiver to lock-on*/ wait_time_microsec = lt_settings->cr_pattern_time; - if (link->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT) - wait_time_microsec = TRAINING_AUX_RD_INTERVAL; - if (link->dc->debug.apply_vendor_specific_lttpr_wa && (link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN)) { wait_time_microsec = 16000; @@ -1624,13 +1627,14 @@ static enum link_training_result perform_clock_recovery_sequence( static inline enum link_training_result dp_transition_to_video_idle( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings, enum link_training_result status) { union lane_count_set lane_count_set = {0}; /* 4. mainlink output idle pattern*/ - dp_set_hw_test_pattern(link, DP_TEST_PATTERN_VIDEO_MODE, NULL, 0); + dp_set_hw_test_pattern(link, link_res, DP_TEST_PATTERN_VIDEO_MODE, NULL, 0); /* * 5. post training adjust if required @@ -1654,7 +1658,7 @@ static inline enum link_training_result dp_transition_to_video_idle( } if (status == LINK_TRAINING_SUCCESS && - perform_post_lt_adj_req_sequence(link, lt_settings) == false) + perform_post_lt_adj_req_sequence(link, link_res, lt_settings) == false) status = LINK_TRAINING_LQA_FAIL; lane_count_set.bits.LANE_COUNT_SET = lt_settings->link_settings.lane_count; @@ -2097,10 +2101,11 @@ static void print_status_message( void dc_link_dp_set_drive_settings( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings) { /* program ASIC PHY settings*/ - dp_set_hw_lane_settings(link, lt_settings, DPRX); + dp_set_hw_lane_settings(link, link_res, lt_settings, DPRX); dp_hw_to_dpcd_lane_settings(lt_settings, lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings); @@ -2111,6 +2116,7 @@ void dc_link_dp_set_drive_settings( bool dc_link_dp_perform_link_training_skip_aux( struct dc_link *link, + const struct link_resource *link_res, const struct dc_link_settings *link_setting) { struct link_training_settings lt_settings = {0}; @@ -2127,10 +2133,10 @@ bool dc_link_dp_perform_link_training_skip_aux( /* 1. Perform_clock_recovery_sequence. */ /* transmit training pattern for clock recovery */ - dp_set_hw_training_pattern(link, lt_settings.pattern_for_cr, DPRX); + dp_set_hw_training_pattern(link, link_res, lt_settings.pattern_for_cr, DPRX); /* call HWSS to set lane settings*/ - dp_set_hw_lane_settings(link, <_settings, DPRX); + dp_set_hw_lane_settings(link, link_res, <_settings, DPRX); /* wait receiver to lock-on*/ dp_wait_for_training_aux_rd_interval(link, lt_settings.cr_pattern_time); @@ -2138,10 +2144,10 @@ bool dc_link_dp_perform_link_training_skip_aux( /* 2. Perform_channel_equalization_sequence. */ /* transmit training pattern for channel equalization. */ - dp_set_hw_training_pattern(link, lt_settings.pattern_for_eq, DPRX); + dp_set_hw_training_pattern(link, link_res, lt_settings.pattern_for_eq, DPRX); /* call HWSS to set lane settings*/ - dp_set_hw_lane_settings(link, <_settings, DPRX); + dp_set_hw_lane_settings(link, link_res, <_settings, DPRX); /* wait receiver to lock-on. */ dp_wait_for_training_aux_rd_interval(link, lt_settings.eq_pattern_time); @@ -2149,7 +2155,7 @@ bool dc_link_dp_perform_link_training_skip_aux( /* 3. Perform_link_training_int. */ /* Mainlink output idle pattern. */ - dp_set_hw_test_pattern(link, DP_TEST_PATTERN_VIDEO_MODE, NULL, 0); + dp_set_hw_test_pattern(link, link_res, DP_TEST_PATTERN_VIDEO_MODE, NULL, 0); print_status_message(link, <_settings, LINK_TRAINING_SUCCESS); @@ -2230,6 +2236,7 @@ static void dpcd_128b_132b_get_aux_rd_interval(struct dc_link *link, static enum link_training_result dp_perform_128b_132b_channel_eq_done_sequence( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings) { uint8_t loop_count; @@ -2241,7 +2248,7 @@ static enum link_training_result dp_perform_128b_132b_channel_eq_done_sequence( union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0}; /* Transmit 128b/132b_TPS1 over Main-Link */ - dp_set_hw_training_pattern(link, lt_settings->pattern_for_cr, DPRX); + dp_set_hw_training_pattern(link, link_res, lt_settings->pattern_for_cr, DPRX); /* Set TRAINING_PATTERN_SET to 01h */ dpcd_set_training_pattern(link, lt_settings->pattern_for_cr); @@ -2251,8 +2258,8 @@ static enum link_training_result dp_perform_128b_132b_channel_eq_done_sequence( &dpcd_lane_status_updated, dpcd_lane_adjust, DPRX); dp_decide_lane_settings(lt_settings, dpcd_lane_adjust, lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings); - dp_set_hw_lane_settings(link, lt_settings, DPRX); - dp_set_hw_training_pattern(link, lt_settings->pattern_for_eq, DPRX); + dp_set_hw_lane_settings(link, link_res, lt_settings, DPRX); + dp_set_hw_training_pattern(link, link_res, lt_settings->pattern_for_eq, DPRX); /* Set loop counter to start from 1 */ loop_count = 1; @@ -2279,7 +2286,7 @@ static enum link_training_result dp_perform_128b_132b_channel_eq_done_sequence( } else if (dpcd_lane_status_updated.bits.LT_FAILED_128b_132b) { status = DP_128b_132b_LT_FAILED; } else { - dp_set_hw_lane_settings(link, lt_settings, DPRX); + dp_set_hw_lane_settings(link, link_res, lt_settings, DPRX); dpcd_set_lane_settings(link, lt_settings, DPRX); } loop_count++; @@ -2308,6 +2315,7 @@ static enum link_training_result dp_perform_128b_132b_channel_eq_done_sequence( static enum link_training_result dp_perform_128b_132b_cds_done_sequence( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings) { /* Assumption: assume hardware has transmitted eq pattern */ @@ -2344,6 +2352,7 @@ static enum link_training_result dp_perform_128b_132b_cds_done_sequence( static enum link_training_result dp_perform_8b_10b_link_training( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings) { enum link_training_result status = LINK_TRAINING_SUCCESS; @@ -2353,7 +2362,7 @@ static enum link_training_result dp_perform_8b_10b_link_training( uint8_t lane = 0; if (link->ctx->dc->work_arounds.lt_early_cr_pattern) - start_clock_recovery_pattern_early(link, lt_settings, DPRX); + start_clock_recovery_pattern_early(link, link_res, lt_settings, DPRX); /* 1. set link rate, lane count and spread. */ dpcd_set_link_settings(link, lt_settings); @@ -2367,12 +2376,13 @@ static enum link_training_result dp_perform_8b_10b_link_training( for (repeater_id = repeater_cnt; (repeater_id > 0 && status == LINK_TRAINING_SUCCESS); repeater_id--) { - status = perform_clock_recovery_sequence(link, lt_settings, repeater_id); + status = perform_clock_recovery_sequence(link, link_res, lt_settings, repeater_id); if (status != LINK_TRAINING_SUCCESS) break; status = perform_channel_equalization_sequence(link, + link_res, lt_settings, repeater_id); @@ -2387,9 +2397,10 @@ static enum link_training_result dp_perform_8b_10b_link_training( } if (status == LINK_TRAINING_SUCCESS) { - status = perform_clock_recovery_sequence(link, lt_settings, DPRX); + status = perform_clock_recovery_sequence(link, link_res, lt_settings, DPRX); if (status == LINK_TRAINING_SUCCESS) { status = perform_channel_equalization_sequence(link, + link_res, lt_settings, DPRX); } @@ -2401,6 +2412,7 @@ static enum link_training_result dp_perform_8b_10b_link_training( #if defined(CONFIG_DRM_AMD_DC_DCN) static enum link_training_result dp_perform_128b_132b_link_training( struct dc_link *link, + const struct link_resource *link_res, struct link_training_settings *lt_settings) { enum link_training_result result = LINK_TRAINING_SUCCESS; @@ -2412,23 +2424,358 @@ static enum link_training_result dp_perform_128b_132b_link_training( decide_8b_10b_training_settings(link, <_settings->link_settings, &legacy_settings); - return dp_perform_8b_10b_link_training(link, &legacy_settings); + return dp_perform_8b_10b_link_training(link, link_res, &legacy_settings); } dpcd_set_link_settings(link, lt_settings); if (result == LINK_TRAINING_SUCCESS) - result = dp_perform_128b_132b_channel_eq_done_sequence(link, lt_settings); + result = dp_perform_128b_132b_channel_eq_done_sequence(link, link_res, lt_settings); if (result == LINK_TRAINING_SUCCESS) - result = dp_perform_128b_132b_cds_done_sequence(link, lt_settings); + result = dp_perform_128b_132b_cds_done_sequence(link, link_res, lt_settings); return result; } #endif +static enum link_training_result dc_link_dp_perform_fixed_vs_pe_training_sequence( + struct dc_link *link, + const struct link_resource *link_res, + struct link_training_settings *lt_settings) +{ + const uint8_t vendor_lttpr_write_data_reset[4] = {0x1, 0x50, 0x63, 0xFF}; + const uint8_t offset = dp_convert_to_count( + link->dpcd_caps.lttpr_caps.phy_repeater_cnt); + const uint8_t vendor_lttpr_write_data_intercept_en[4] = {0x1, 0x55, 0x63, 0x0}; + const uint8_t vendor_lttpr_write_data_intercept_dis[4] = {0x1, 0x55, 0x63, 0x68}; + uint8_t vendor_lttpr_write_data_vs[4] = {0x1, 0x51, 0x63, 0x0}; + uint8_t vendor_lttpr_write_data_pe[4] = {0x1, 0x52, 0x63, 0x0}; + uint32_t vendor_lttpr_write_address = 0xF004F; + enum link_training_result status = LINK_TRAINING_SUCCESS; + uint8_t lane = 0; + union down_spread_ctrl downspread = {0}; + union lane_count_set lane_count_set = {0}; + uint8_t toggle_rate; + uint8_t rate; + + /* Only 8b/10b is supported */ + ASSERT(dp_get_link_encoding_format(<_settings->link_settings) == + DP_8b_10b_ENCODING); + + if (offset != 0xFF) { + vendor_lttpr_write_address += + ((DP_REPEATER_CONFIGURATION_AND_STATUS_SIZE) * (offset - 1)); + } + + /* Vendor specific: Reset lane settings */ + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_reset[0], + sizeof(vendor_lttpr_write_data_reset)); + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_vs[0], + sizeof(vendor_lttpr_write_data_vs)); + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_pe[0], + sizeof(vendor_lttpr_write_data_pe)); + + /* Vendor specific: Enable intercept */ + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_intercept_en[0], + sizeof(vendor_lttpr_write_data_intercept_en)); + + /* 1. set link rate, lane count and spread. */ + + downspread.raw = (uint8_t)(lt_settings->link_settings.link_spread); + + lane_count_set.bits.LANE_COUNT_SET = + lt_settings->link_settings.lane_count; + + lane_count_set.bits.ENHANCED_FRAMING = lt_settings->enhanced_framing; + lane_count_set.bits.POST_LT_ADJ_REQ_GRANTED = 0; + + + if (lt_settings->pattern_for_eq < DP_TRAINING_PATTERN_SEQUENCE_4) { + lane_count_set.bits.POST_LT_ADJ_REQ_GRANTED = + link->dpcd_caps.max_ln_count.bits.POST_LT_ADJ_REQ_SUPPORTED; + } + + core_link_write_dpcd(link, DP_DOWNSPREAD_CTRL, + &downspread.raw, sizeof(downspread)); + + core_link_write_dpcd(link, DP_LANE_COUNT_SET, + &lane_count_set.raw, 1); + +#if defined(CONFIG_DRM_AMD_DC_DCN) + rate = get_dpcd_link_rate(<_settings->link_settings); +#else + rate = (uint8_t) (lt_settings->link_settings.link_rate); +#endif + + /* Vendor specific: Toggle link rate */ + toggle_rate = (rate == 0x6) ? 0xA : 0x6; + + if (link->vendor_specific_lttpr_link_rate_wa == rate) { + core_link_write_dpcd( + link, + DP_LINK_BW_SET, + &toggle_rate, + 1); + } + + link->vendor_specific_lttpr_link_rate_wa = rate; + + core_link_write_dpcd(link, DP_LINK_BW_SET, &rate, 1); + + DC_LOG_HW_LINK_TRAINING("%s\n %x rate = %x\n %x lane = %x framing = %x\n %x spread = %x\n", + __func__, + DP_LINK_BW_SET, + lt_settings->link_settings.link_rate, + DP_LANE_COUNT_SET, + lt_settings->link_settings.lane_count, + lt_settings->enhanced_framing, + DP_DOWNSPREAD_CTRL, + lt_settings->link_settings.link_spread); + + /* 2. Perform link training */ + + /* Perform Clock Recovery Sequence */ + if (status == LINK_TRAINING_SUCCESS) { + uint32_t retries_cr; + uint32_t retry_count; + uint32_t wait_time_microsec; + enum dc_lane_count lane_count = lt_settings->link_settings.lane_count; + union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX]; + union lane_align_status_updated dpcd_lane_status_updated; + union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0}; + + retries_cr = 0; + retry_count = 0; + + while ((retries_cr < LINK_TRAINING_MAX_RETRY_COUNT) && + (retry_count < LINK_TRAINING_MAX_CR_RETRY)) { + + memset(&dpcd_lane_status, '\0', sizeof(dpcd_lane_status)); + memset(&dpcd_lane_status_updated, '\0', + sizeof(dpcd_lane_status_updated)); + + /* 1. call HWSS to set lane settings */ + dp_set_hw_lane_settings( + link, + link_res, + lt_settings, + 0); + + /* 2. update DPCD of the receiver */ + if (!retry_count) { + /* EPR #361076 - write as a 5-byte burst, + * but only for the 1-st iteration. + */ + dpcd_set_lt_pattern_and_lane_settings( + link, + lt_settings, + lt_settings->pattern_for_cr, + 0); + /* Vendor specific: Disable intercept */ + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_intercept_dis[0], + sizeof(vendor_lttpr_write_data_intercept_dis)); + } else { + vendor_lttpr_write_data_vs[3] = 0; + vendor_lttpr_write_data_pe[3] = 0; + + for (lane = 0; lane < lane_count; lane++) { + vendor_lttpr_write_data_vs[3] |= + lt_settings->dpcd_lane_settings[lane].bits.VOLTAGE_SWING_SET << (2 * lane); + vendor_lttpr_write_data_pe[3] |= + lt_settings->dpcd_lane_settings[lane].bits.PRE_EMPHASIS_SET << (2 * lane); + } + + /* Vendor specific: Update VS and PE to DPRX requested value */ + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_vs[0], + sizeof(vendor_lttpr_write_data_vs)); + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_pe[0], + sizeof(vendor_lttpr_write_data_pe)); + + dpcd_set_lane_settings( + link, + lt_settings, + 0); + } + + /* 3. wait receiver to lock-on*/ + wait_time_microsec = lt_settings->cr_pattern_time; + + dp_wait_for_training_aux_rd_interval( + link, + wait_time_microsec); + + /* 4. Read lane status and requested drive + * settings as set by the sink + */ + dp_get_lane_status_and_lane_adjust( + link, + lt_settings, + dpcd_lane_status, + &dpcd_lane_status_updated, + dpcd_lane_adjust, + 0); + + /* 5. check CR done*/ + if (dp_is_cr_done(lane_count, dpcd_lane_status)) { + status = LINK_TRAINING_SUCCESS; + break; + } + + /* 6. max VS reached*/ + if (dp_is_max_vs_reached(lt_settings)) + break; + + /* 7. same lane settings */ + /* Note: settings are the same for all lanes, + * so comparing first lane is sufficient + */ + if (lt_settings->dpcd_lane_settings[0].bits.VOLTAGE_SWING_SET == + dpcd_lane_adjust[0].bits.VOLTAGE_SWING_LANE) + retries_cr++; + else + retries_cr = 0; + + /* 8. update VS/PE/PC2 in lt_settings*/ + dp_decide_lane_settings(lt_settings, dpcd_lane_adjust, + lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings); + retry_count++; + } + + if (retry_count >= LINK_TRAINING_MAX_CR_RETRY) { + ASSERT(0); + DC_LOG_ERROR("%s: Link Training Error, could not get CR after %d tries. Possibly voltage swing issue", + __func__, + LINK_TRAINING_MAX_CR_RETRY); + + } + + status = dp_get_cr_failure(lane_count, dpcd_lane_status); + } + + /* Perform Channel EQ Sequence */ + if (status == LINK_TRAINING_SUCCESS) { + enum dc_dp_training_pattern tr_pattern; + uint32_t retries_ch_eq; + uint32_t wait_time_microsec; + enum dc_lane_count lane_count = lt_settings->link_settings.lane_count; + union lane_align_status_updated dpcd_lane_status_updated = {0}; + union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {0}; + union lane_adjust dpcd_lane_adjust[LANE_COUNT_DP_MAX] = {0}; + + /* Note: also check that TPS4 is a supported feature*/ + tr_pattern = lt_settings->pattern_for_eq; + + dp_set_hw_training_pattern(link, link_res, tr_pattern, 0); + + status = LINK_TRAINING_EQ_FAIL_EQ; + + for (retries_ch_eq = 0; retries_ch_eq <= LINK_TRAINING_MAX_RETRY_COUNT; + retries_ch_eq++) { + + dp_set_hw_lane_settings(link, link_res, lt_settings, 0); + + vendor_lttpr_write_data_vs[3] = 0; + vendor_lttpr_write_data_pe[3] = 0; + + for (lane = 0; lane < lane_count; lane++) { + vendor_lttpr_write_data_vs[3] |= + lt_settings->dpcd_lane_settings[lane].bits.VOLTAGE_SWING_SET << (2 * lane); + vendor_lttpr_write_data_pe[3] |= + lt_settings->dpcd_lane_settings[lane].bits.PRE_EMPHASIS_SET << (2 * lane); + } + + /* Vendor specific: Update VS and PE to DPRX requested value */ + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_vs[0], + sizeof(vendor_lttpr_write_data_vs)); + core_link_write_dpcd( + link, + vendor_lttpr_write_address, + &vendor_lttpr_write_data_pe[0], + sizeof(vendor_lttpr_write_data_pe)); + + /* 2. update DPCD*/ + if (!retries_ch_eq) + /* EPR #361076 - write as a 5-byte burst, + * but only for the 1-st iteration + */ + + dpcd_set_lt_pattern_and_lane_settings( + link, + lt_settings, + tr_pattern, 0); + else + dpcd_set_lane_settings(link, lt_settings, 0); + + /* 3. wait for receiver to lock-on*/ + wait_time_microsec = lt_settings->eq_pattern_time; + + dp_wait_for_training_aux_rd_interval( + link, + wait_time_microsec); + + /* 4. Read lane status and requested + * drive settings as set by the sink + */ + dp_get_lane_status_and_lane_adjust( + link, + lt_settings, + dpcd_lane_status, + &dpcd_lane_status_updated, + dpcd_lane_adjust, + 0); + + /* 5. check CR done*/ + if (!dp_is_cr_done(lane_count, dpcd_lane_status)) { + status = LINK_TRAINING_EQ_FAIL_CR; + break; + } + + /* 6. check CHEQ done*/ + if (dp_is_ch_eq_done(lane_count, dpcd_lane_status) && + dp_is_symbol_locked(lane_count, dpcd_lane_status) && + dp_is_interlane_aligned(dpcd_lane_status_updated)) { + status = LINK_TRAINING_SUCCESS; + break; + } + + /* 7. update VS/PE/PC2 in lt_settings*/ + dp_decide_lane_settings(lt_settings, dpcd_lane_adjust, + lt_settings->hw_lane_settings, lt_settings->dpcd_lane_settings); + } + } + + return status; +} + + enum link_training_result dc_link_dp_perform_link_training( struct dc_link *link, + const struct link_resource *link_res, const struct dc_link_settings *link_settings, bool skip_video_pattern) { @@ -2459,18 +2806,22 @@ enum link_training_result dc_link_dp_perform_link_training( /* configure link prior to entering training mode */ dpcd_configure_lttpr_mode(link, <_settings); - dp_set_fec_ready(link, lt_settings.should_set_fec_ready); + dp_set_fec_ready(link, link_res, lt_settings.should_set_fec_ready); dpcd_configure_channel_coding(link, <_settings); /* enter training mode: * Per DP specs starting from here, DPTX device shall not issue * Non-LT AUX transactions inside training mode. */ - if (encoding == DP_8b_10b_ENCODING) - status = dp_perform_8b_10b_link_training(link, <_settings); + if (!link->dc->debug.apply_vendor_specific_lttpr_wa && + (link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) && + link->lttpr_mode == LTTPR_MODE_TRANSPARENT) + status = dc_link_dp_perform_fixed_vs_pe_training_sequence(link, link_res, <_settings); + else if (encoding == DP_8b_10b_ENCODING) + status = dp_perform_8b_10b_link_training(link, link_res, <_settings); #if defined(CONFIG_DRM_AMD_DC_DCN) else if (encoding == DP_128b_132b_ENCODING) - status = dp_perform_128b_132b_link_training(link, <_settings); + status = dp_perform_128b_132b_link_training(link, link_res, <_settings); #endif else ASSERT(0); @@ -2488,6 +2839,7 @@ enum link_training_result dc_link_dp_perform_link_training( /* switch to video idle */ if ((status == LINK_TRAINING_SUCCESS) || !skip_video_pattern) status = dp_transition_to_video_idle(link, + link_res, <_settings, status); @@ -2539,6 +2891,7 @@ bool perform_link_training_with_retries( dp_enable_link_phy( link, + &pipe_ctx->link_res, signal, pipe_ctx->clock_source->id, ¤t_setting); @@ -2566,23 +2919,24 @@ bool perform_link_training_with_retries( dp_set_panel_mode(link, panel_mode); if (link->aux_access_disabled) { - dc_link_dp_perform_link_training_skip_aux(link, ¤t_setting); + dc_link_dp_perform_link_training_skip_aux(link, &pipe_ctx->link_res, ¤t_setting); return true; } else { /** @todo Consolidate USB4 DP and DPx.x training. */ if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) { status = dc_link_dpia_perform_link_training(link, - ¤t_setting, - skip_video_pattern); + &pipe_ctx->link_res, + ¤t_setting, + skip_video_pattern); /* Transmit idle pattern once training successful. */ if (status == LINK_TRAINING_SUCCESS) - dp_set_hw_test_pattern(link, DP_TEST_PATTERN_VIDEO_MODE, - NULL, 0); + dp_set_hw_test_pattern(link, &pipe_ctx->link_res, DP_TEST_PATTERN_VIDEO_MODE, NULL, 0); } else { status = dc_link_dp_perform_link_training(link, - ¤t_setting, - skip_video_pattern); + &pipe_ctx->link_res, + ¤t_setting, + skip_video_pattern); } if (status == LINK_TRAINING_SUCCESS) @@ -2597,7 +2951,7 @@ bool perform_link_training_with_retries( DC_LOG_WARNING("%s: Link training attempt %u of %d failed\n", __func__, (unsigned int)j + 1, attempts); - dp_disable_link_phy(link, signal); + dp_disable_link_phy(link, &pipe_ctx->link_res, signal); /* Abort link training if failure due to sink being unplugged. */ if (status == LINK_TRAINING_ABORT) { @@ -2646,12 +3000,13 @@ static enum clock_source_id get_clock_source_id(struct dc_link *link) return dp_cs_id; } -static void set_dp_mst_mode(struct dc_link *link, bool mst_enable) +static void set_dp_mst_mode(struct dc_link *link, const struct link_resource *link_res, + bool mst_enable) { if (mst_enable == false && link->type == dc_connection_mst_branch) { /* Disable MST on link. Use only local sink. */ - dp_disable_link_phy_mst(link, link->connector_signal); + dp_disable_link_phy_mst(link, link_res, link->connector_signal); link->type = dc_connection_single; link->local_sink = link->remote_sinks[0]; @@ -2662,7 +3017,7 @@ static void set_dp_mst_mode(struct dc_link *link, bool mst_enable) link->type == dc_connection_single && link->remote_sinks[0] != NULL) { /* Re-enable MST on link. */ - dp_disable_link_phy(link, link->connector_signal); + dp_disable_link_phy(link, link_res, link->connector_signal); dp_enable_mst_on_sink(link, true); link->type = dc_connection_mst_branch; @@ -2688,6 +3043,7 @@ bool dc_link_dp_sync_lt_begin(struct dc_link *link) enum link_training_result dc_link_dp_sync_lt_attempt( struct dc_link *link, + const struct link_resource *link_res, struct dc_link_settings *link_settings, struct dc_link_training_overrides *lt_overrides) { @@ -2707,14 +3063,14 @@ enum link_training_result dc_link_dp_sync_lt_attempt( <_settings); /* Setup MST Mode */ if (lt_overrides->mst_enable) - set_dp_mst_mode(link, *lt_overrides->mst_enable); + set_dp_mst_mode(link, link_res, *lt_overrides->mst_enable); /* Disable link */ - dp_disable_link_phy(link, link->connector_signal); + dp_disable_link_phy(link, link_res, link->connector_signal); /* Enable link */ dp_cs_id = get_clock_source_id(link); - dp_enable_link_phy(link, link->connector_signal, + dp_enable_link_phy(link, link_res, link->connector_signal, dp_cs_id, link_settings); /* Set FEC enable */ @@ -2722,7 +3078,7 @@ enum link_training_result dc_link_dp_sync_lt_attempt( if (dp_get_link_encoding_format(link_settings) == DP_8b_10b_ENCODING) { #endif fec_enable = lt_overrides->fec_enable && *lt_overrides->fec_enable; - dp_set_fec_ready(link, fec_enable); + dp_set_fec_ready(link, NULL, fec_enable); #if defined(CONFIG_DRM_AMD_DC_DCN) } #endif @@ -2739,7 +3095,7 @@ enum link_training_result dc_link_dp_sync_lt_attempt( /* Attempt to train with given link training settings */ if (link->ctx->dc->work_arounds.lt_early_cr_pattern) - start_clock_recovery_pattern_early(link, <_settings, DPRX); + start_clock_recovery_pattern_early(link, link_res, <_settings, DPRX); /* Set link rate, lane count and spread. */ dpcd_set_link_settings(link, <_settings); @@ -2747,9 +3103,10 @@ enum link_training_result dc_link_dp_sync_lt_attempt( /* 2. perform link training (set link training done * to false is done as well) */ - lt_status = perform_clock_recovery_sequence(link, <_settings, DPRX); + lt_status = perform_clock_recovery_sequence(link, link_res, <_settings, DPRX); if (lt_status == LINK_TRAINING_SUCCESS) { lt_status = perform_channel_equalization_sequence(link, + link_res, <_settings, DPRX); } @@ -2770,11 +3127,11 @@ bool dc_link_dp_sync_lt_end(struct dc_link *link, bool link_down) #if defined(CONFIG_DRM_AMD_DC_DCN) struct dc_link_settings link_settings = link->cur_link_settings; #endif - dp_disable_link_phy(link, link->connector_signal); + dp_disable_link_phy(link, NULL, link->connector_signal); #if defined(CONFIG_DRM_AMD_DC_DCN) if (dp_get_link_encoding_format(&link_settings) == DP_8b_10b_ENCODING) #endif - dp_set_fec_ready(link, false); + dp_set_fec_ready(link, NULL, false); } link->sync_lt_in_progress = false; @@ -2829,7 +3186,8 @@ bool dc_link_dp_get_max_link_enc_cap(const struct dc_link *link, struct dc_link_ return false; } -static struct dc_link_settings get_max_link_cap(struct dc_link *link) +static struct dc_link_settings get_max_link_cap(struct dc_link *link, + const struct link_resource *link_res) { struct dc_link_settings max_link_cap = {0}; #if defined(CONFIG_DRM_AMD_DC_DCN) @@ -2853,9 +3211,11 @@ static struct dc_link_settings get_max_link_cap(struct dc_link *link) if (link_enc) link_enc->funcs->get_max_link_cap(link_enc, &max_link_cap); #if defined(CONFIG_DRM_AMD_DC_DCN) - if (max_link_cap.link_rate >= LINK_RATE_UHBR10 && - !link->hpo_dp_link_enc) - max_link_cap.link_rate = LINK_RATE_HIGH3; + if (max_link_cap.link_rate >= LINK_RATE_UHBR10) { + if (!link_res->hpo_dp_link_enc || + link->dc->debug.disable_uhbr) + max_link_cap.link_rate = LINK_RATE_HIGH3; + } #endif /* Lower link settings based on sink's link cap */ @@ -2873,7 +3233,7 @@ static struct dc_link_settings get_max_link_cap(struct dc_link *link) * account for lttpr repeaters cap * notes: repeaters do not snoop in the DPRX Capabilities addresses (3.6.3). */ - if (link->lttpr_mode == LTTPR_MODE_NON_TRANSPARENT) { + if (link->lttpr_mode != LTTPR_MODE_NON_LTTPR) { if (link->dpcd_caps.lttpr_caps.max_lane_count < max_link_cap.lane_count) max_link_cap.lane_count = link->dpcd_caps.lttpr_caps.max_lane_count; @@ -3012,6 +3372,7 @@ bool hpd_rx_irq_check_link_loss_status( bool dp_verify_link_cap( struct dc_link *link, + const struct link_resource *link_res, struct dc_link_settings *known_limit_link_setting, int *fail_count) { @@ -3029,7 +3390,7 @@ bool dp_verify_link_cap( /* link training starts with the maximum common settings * supported by both sink and ASIC. */ - max_link_cap = get_max_link_cap(link); + max_link_cap = get_max_link_cap(link, link_res); initial_link_settings = get_common_supported_link_settings( *known_limit_link_setting, max_link_cap); @@ -3069,7 +3430,7 @@ bool dp_verify_link_cap( * find the physical link capability */ /* disable PHY done possible by BIOS, will be done by driver itself */ - dp_disable_link_phy(link, link->connector_signal); + dp_disable_link_phy(link, link_res, link->connector_signal); dp_cs_id = get_clock_source_id(link); @@ -3081,8 +3442,8 @@ bool dp_verify_link_cap( */ if (link->link_enc && link->link_enc->features.flags.bits.DP_IS_USB_C && link->dc->debug.usbc_combo_phy_reset_wa) { - dp_enable_link_phy(link, link->connector_signal, dp_cs_id, cur); - dp_disable_link_phy(link, link->connector_signal); + dp_enable_link_phy(link, link_res, link->connector_signal, dp_cs_id, cur); + dp_disable_link_phy(link, link_res, link->connector_signal); } do { @@ -3093,6 +3454,7 @@ bool dp_verify_link_cap( dp_enable_link_phy( link, + link_res, link->connector_signal, dp_cs_id, cur); @@ -3103,6 +3465,7 @@ bool dp_verify_link_cap( else { status = dc_link_dp_perform_link_training( link, + link_res, cur, skip_video_pattern); if (status == LINK_TRAINING_SUCCESS) @@ -3124,7 +3487,7 @@ bool dp_verify_link_cap( * setting or before returning we'll enable it later * based on the actual mode we're driving */ - dp_disable_link_phy(link, link->connector_signal); + dp_disable_link_phy(link, link_res, link->connector_signal); } while (!success && decide_fallback_link_setting(link, initial_link_settings, cur, status)); @@ -3148,6 +3511,7 @@ bool dp_verify_link_cap( bool dp_verify_link_cap_with_retries( struct dc_link *link, + const struct link_resource *link_res, struct dc_link_settings *known_limit_link_setting, int attempts) { @@ -3165,7 +3529,7 @@ bool dp_verify_link_cap_with_retries( link->verified_link_cap.link_rate = LINK_RATE_LOW; link->verified_link_cap.link_spread = LINK_SPREAD_DISABLED; break; - } else if (dp_verify_link_cap(link, + } else if (dp_verify_link_cap(link, link_res, known_limit_link_setting, &fail_count) && fail_count == 0) { success = true; @@ -3177,13 +3541,13 @@ bool dp_verify_link_cap_with_retries( } bool dp_verify_mst_link_cap( - struct dc_link *link) + struct dc_link *link, const struct link_resource *link_res) { struct dc_link_settings max_link_cap = {0}; if (dp_get_link_encoding_format(&link->reported_link_cap) == DP_8b_10b_ENCODING) { - max_link_cap = get_max_link_cap(link); + max_link_cap = get_max_link_cap(link, link_res); link->verified_link_cap = get_common_supported_link_settings( link->reported_link_cap, max_link_cap); @@ -3192,6 +3556,7 @@ bool dp_verify_mst_link_cap( else if (dp_get_link_encoding_format(&link->reported_link_cap) == DP_128b_132b_ENCODING) { dp_verify_link_cap_with_retries(link, + link_res, &link->reported_link_cap, LINK_TRAINING_MAX_VERIFY_RETRY); } @@ -5720,7 +6085,7 @@ bool dc_link_dp_set_test_pattern( DP_TEST_PATTERN_VIDEO_MODE) { /* Set CRTC Test Pattern */ set_crtc_test_pattern(link, pipe_ctx, test_pattern, test_pattern_color_space); - dp_set_hw_test_pattern(link, test_pattern, + dp_set_hw_test_pattern(link, &pipe_ctx->link_res, test_pattern, (uint8_t *)p_custom_pattern, (uint32_t)cust_pattern_size); @@ -5751,7 +6116,7 @@ bool dc_link_dp_set_test_pattern( p_link_settings->dpcd_lane_settings, p_link_settings->link_settings.lane_count); } else { - dp_set_hw_lane_settings(link, p_link_settings, DPRX); + dp_set_hw_lane_settings(link, &pipe_ctx->link_res, p_link_settings, DPRX); dpcd_set_lane_settings(link, p_link_settings, DPRX); } } @@ -5766,7 +6131,7 @@ bool dc_link_dp_set_test_pattern( pipes->stream_res.stream_enc->funcs->dp_blank(link, pipe_ctx->stream_res.stream_enc); } - dp_set_hw_test_pattern(link, test_pattern, + dp_set_hw_test_pattern(link, &pipe_ctx->link_res, test_pattern, (uint8_t *)p_custom_pattern, (uint32_t)cust_pattern_size); @@ -6086,7 +6451,7 @@ enum dp_panel_mode dp_get_panel_mode(struct dc_link *link) return DP_PANEL_MODE_DEFAULT; } -enum dc_status dp_set_fec_ready(struct dc_link *link, bool ready) +enum dc_status dp_set_fec_ready(struct dc_link *link, const struct link_resource *link_res, bool ready) { /* FEC has to be "set ready" before the link training. * The policy is to always train with FEC @@ -6653,8 +7018,10 @@ struct fixed31_32 calculate_sst_avg_time_slots_per_mtp( bool is_dp_128b_132b_signal(struct pipe_ctx *pipe_ctx) { + /* If this assert is hit then we have a link encoder dynamic management issue */ + ASSERT(pipe_ctx->stream_res.hpo_dp_stream_enc ? pipe_ctx->link_res.hpo_dp_link_enc != NULL : true); return (pipe_ctx->stream_res.hpo_dp_stream_enc && - pipe_ctx->stream->link->hpo_dp_link_enc && + pipe_ctx->link_res.hpo_dp_link_enc && dc_is_dp_signal(pipe_ctx->stream->signal)); } #endif |