diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sa8295p-adp.dts')
-rw-r--r-- | arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 336 |
1 files changed, 249 insertions, 87 deletions
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 84cb6f3eeb56..fd253942e5e5 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -11,22 +11,107 @@ #include <dt-bindings/spmi/spmi.h> #include "sa8540p.dtsi" +#include "sa8540p-pmics.dtsi" / { model = "Qualcomm SA8295P ADP"; compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; aliases { - serial0 = &qup2_uart17; + serial0 = &uart17; }; chosen { stdout-path = "serial0:115200n8"; }; + + dp2-connector { + compatible = "dp-connector"; + label = "DP2"; + type = "mini"; + + hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + + port { + dp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp0_phy_out>; + }; + }; + }; + + dp3-connector { + compatible = "dp-connector"; + label = "DP3"; + type = "mini"; + + hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + + port { + dp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp1_phy_out>; + }; + }; + }; + + edp0-connector { + compatible = "dp-connector"; + label = "EDP0"; + type = "mini"; + + hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + + port { + edp0_connector_in: endpoint { + remote-endpoint = <&mdss0_dp2_phy_out>; + }; + }; + }; + + edp1-connector { + compatible = "dp-connector"; + label = "EDP1"; + type = "mini"; + + hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + + port { + edp1_connector_in: endpoint { + remote-endpoint = <&mdss0_dp3_phy_out>; + }; + }; + }; + + edp2-connector { + compatible = "dp-connector"; + label = "EDP2"; + type = "mini"; + + hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + + port { + edp2_connector_in: endpoint { + remote-endpoint = <&mdss1_dp2_phy_out>; + }; + }; + }; + + edp3-connector { + compatible = "dp-connector"; + label = "EDP3"; + type = "mini"; + + hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + port { + edp3_connector_in: endpoint { + remote-endpoint = <&mdss1_dp3_phy_out>; + }; + }; + }; }; &apps_rsc { - pmm8540-a-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -66,7 +151,7 @@ }; }; - pmm8540-c-regulators { + regulators-1 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "c"; @@ -139,7 +224,7 @@ }; }; - pmm8540-g-regulators { + regulators-2 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "g"; @@ -159,13 +244,168 @@ vreg_l8g: ldo8 { regulator-name = "vreg_l8g"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l11g: ldo11 { + regulator-name = "vreg_l11g"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc0 { + status = "okay"; +}; + +&dispcc1 { + status = "okay"; +}; + +&mdss0 { + status = "okay"; +}; + +&mdss0_dp2 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss0_dp2_phy_out: endpoint { + remote-endpoint = <&edp0_connector_in>; + }; + }; }; }; +&mdss0_dp2_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss0_dp3 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss0_dp3_phy_out: endpoint { + remote-endpoint = <&edp1_connector_in>; + }; + }; + }; +}; + +&mdss0_dp3_phy { + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1 { + status = "okay"; +}; + +&mdss1_dp0 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp0_phy_out: endpoint { + remote-endpoint = <&dp2_connector_in>; + }; + }; + }; +}; + +&mdss1_dp0_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1_dp1 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp1_phy_out: endpoint { + remote-endpoint = <&dp3_connector_in>; + }; + }; + }; +}; + +&mdss1_dp1_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1_dp2 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp2_phy_out: endpoint { + remote-endpoint = <&edp2_connector_in>; + }; + }; + }; +}; + +&mdss1_dp2_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + +&mdss1_dp3 { + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss1_dp3_phy_out: endpoint { + remote-endpoint = <&edp3_connector_in>; + }; + }; + }; +}; + +&mdss1_dp3_phy { + vdda-phy-supply = <&vreg_l11g>; + vdda-pll-supply = <&vreg_l3g>; + + status = "okay"; +}; + &pcie2a { perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; @@ -240,11 +480,6 @@ status = "okay"; }; -&qup2_uart17 { - compatible = "qcom,geni-debug-uart"; - status = "okay"; -}; - &remoteproc_adsp { firmware-name = "qcom/sa8540p/adsp.mbn"; status = "okay"; @@ -260,82 +495,9 @@ status = "okay"; }; -&spmi_bus { - pm8450a: pmic@0 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@6000 { - compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; - wakeup-source; - }; - - pm8450a_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450a_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450c: pmic@4 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x4 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450c_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450c_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450e: pmic@8 { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0x8 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450e_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450e_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8450g: pmic@c { - compatible = "qcom,pm8150", "qcom,spmi-pmic"; - reg = <0xc SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8450g_gpios: gpio@c000 { - compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio"; - reg = <0xc000>; - gpio-controller; - gpio-ranges = <&pm8450g_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; +&uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; }; &ufs_mem_hc { |