summaryrefslogtreecommitdiff
path: root/Documentation/hwmon/pxe1610
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/pxe1610')
-rw-r--r--Documentation/hwmon/pxe161090
1 files changed, 90 insertions, 0 deletions
diff --git a/Documentation/hwmon/pxe1610 b/Documentation/hwmon/pxe1610
new file mode 100644
index 000000000000..211cedeefb44
--- /dev/null
+++ b/Documentation/hwmon/pxe1610
@@ -0,0 +1,90 @@
+Kernel driver pxe1610
+=====================
+
+Supported chips:
+ * Infineon PXE1610
+ Prefix: 'pxe1610'
+ Addresses scanned: -
+ Datasheet: Datasheet is not publicly available.
+
+ * Infineon PXE1110
+ Prefix: 'pxe1110'
+ Addresses scanned: -
+ Datasheet: Datasheet is not publicly available.
+
+ * Infineon PXM1310
+ Prefix: 'pxm1310'
+ Addresses scanned: -
+ Datasheet: Datasheet is not publicly available.
+
+Author: Vijay Khemka <vijaykhemka@fb.com>
+
+
+Description
+-----------
+
+PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers
+and compliant to
+ -- Intel VR13 DC-DC converter specifications.
+ -- Intel SVID protocol.
+Used for Vcore power regulation for Intel VR13 based microprocessors
+ -- Servers, Workstations, and High-end desktops
+
+PXM1310 is a Multi-rail Controller and it is compliant to
+ -- Intel VR13 DC-DC converter specifications.
+ -- Intel SVID protocol.
+Used for DDR3/DDR4 Memory power regulation for Intel VR13 and
+IMVP8 based systems
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have
+to instantiate devices explicitly.
+
+Example: the following commands will load the driver for an PXE1610
+at address 0x70 on I2C bus #4:
+
+# modprobe pxe1610
+# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+
+It can also be instantiated by declaring in device tree
+
+
+Sysfs attributes
+----------------
+
+curr1_label "iin"
+curr1_input Measured input current
+curr1_alarm Current high alarm
+
+curr[2-4]_label "iout[1-3]"
+curr[2-4]_input Measured output current
+curr[2-4]_crit Critical maximum current
+curr[2-4]_crit_alarm Current critical high alarm
+
+in1_label "vin"
+in1_input Measured input voltage
+in1_crit Critical maximum input voltage
+in1_crit_alarm Input voltage critical high alarm
+
+in[2-4]_label "vout[1-3]"
+in[2-4]_input Measured output voltage
+in[2-4]_lcrit Critical minimum output voltage
+in[2-4]_lcrit_alarm Output voltage critical low alarm
+in[2-4]_crit Critical maximum output voltage
+in[2-4]_crit_alarm Output voltage critical high alarm
+
+power1_label "pin"
+power1_input Measured input power
+power1_alarm Input power high alarm
+
+power[2-4]_label "pout[1-3]"
+power[2-4]_input Measured output power
+
+temp[1-3]_input Measured temperature
+temp[1-3]_crit Critical high temperature
+temp[1-3]_crit_alarm Chip temperature critical high alarm
+temp[1-3]_max Maximum temperature
+temp[1-3]_max_alarm Chip temperature high alarm