drm/amdgpu: add ras aldebaran ras eeprom driver

added host to smu cmd to access i2c eeprom

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1 files changed, 229 insertions, 0 deletions

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
index ddbb9a23a0af..bca02a9fb489 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
@@ -1266,6 +1266,233 @@ static bool aldebaran_is_dpm_running(struct smu_context *smu)
 	return !!(feature_enabled & SMC_DPM_FEATURE);
 }
 
+static void aldebaran_fill_i2c_req(SwI2cRequest_t  *req, bool write,
+				  uint8_t address, uint32_t numbytes,
+				  uint8_t *data)
+{
+	int i;
+
+	req->I2CcontrollerPort = 0;
+	req->I2CSpeed = 2;
+	req->SlaveAddress = address;
+	req->NumCmds = numbytes;
+
+	for (i = 0; i < numbytes; i++) {
+		SwI2cCmd_t *cmd =  &req->SwI2cCmds[i];
+
+		/* First 2 bytes are always write for lower 2b EEPROM address */
+		if (i < 2)
+			cmd->CmdConfig = CMDCONFIG_READWRITE_MASK;
+		else
+			cmd->CmdConfig = write ? CMDCONFIG_READWRITE_MASK : 0;
+
+
+		/* Add RESTART for read  after address filled */
+		cmd->CmdConfig |= (i == 2 && !write) ? CMDCONFIG_RESTART_MASK : 0;
+
+		/* Add STOP in the end */
+		cmd->CmdConfig |= (i == (numbytes - 1)) ? CMDCONFIG_STOP_MASK : 0;
+
+		/* Fill with data regardless if read or write to simplify code */
+		cmd->ReadWriteData = data[i];
+	}
+}
+
+static int aldebaran_i2c_read_data(struct i2c_adapter *control,
+					       uint8_t address,
+					       uint8_t *data,
+					       uint32_t numbytes)
+{
+	uint32_t  i, ret = 0;
+	SwI2cRequest_t req;
+	struct amdgpu_device *adev = to_amdgpu_device(control);
+	struct smu_table_context *smu_table = &adev->smu.smu_table;
+	struct smu_table *table = &smu_table->driver_table;
+
+	if (numbytes > MAX_SW_I2C_COMMANDS) {
+		dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n",
+			numbytes, MAX_SW_I2C_COMMANDS);
+		return -EINVAL;
+	}
+
+	memset(&req, 0, sizeof(req));
+	aldebaran_fill_i2c_req(&req, false, address, numbytes, data);
+
+	mutex_lock(&adev->smu.mutex);
+	/* Now read data starting with that address */
+	ret = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req,
+					true);
+	mutex_unlock(&adev->smu.mutex);
+
+	if (!ret) {
+		SwI2cRequest_t *res = (SwI2cRequest_t *)table->cpu_addr;
+
+		/* Assume SMU  fills res.SwI2cCmds[i].Data with read bytes */
+		for (i = 0; i < numbytes; i++)
+			data[i] = res->SwI2cCmds[i].ReadWriteData;
+
+		dev_dbg(adev->dev, "aldebaran_i2c_read_data, address = %x, bytes = %d, data :",
+				  (uint16_t)address, numbytes);
+
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE,
+			       8, 1, data, numbytes, false);
+	} else
+		dev_err(adev->dev, "aldebaran_i2c_read_data - error occurred :%x", ret);
+
+	return ret;
+}
+
+static int aldebaran_i2c_write_data(struct i2c_adapter *control,
+						uint8_t address,
+						uint8_t *data,
+						uint32_t numbytes)
+{
+	uint32_t ret;
+	SwI2cRequest_t req;
+	struct amdgpu_device *adev = to_amdgpu_device(control);
+
+	if (numbytes > MAX_SW_I2C_COMMANDS) {
+		dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n",
+			numbytes, MAX_SW_I2C_COMMANDS);
+		return -EINVAL;
+	}
+
+	memset(&req, 0, sizeof(req));
+	aldebaran_fill_i2c_req(&req, true, address, numbytes, data);
+
+	mutex_lock(&adev->smu.mutex);
+	ret = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req, true);
+	mutex_unlock(&adev->smu.mutex);
+
+	if (!ret) {
+		dev_dbg(adev->dev, "aldebaran_i2c_write(), address = %x, bytes = %d , data: ",
+					 (uint16_t)address, numbytes);
+
+		print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE,
+			       8, 1, data, numbytes, false);
+		/*
+		 * According to EEPROM spec there is a MAX of 10 ms required for
+		 * EEPROM to flush internal RX buffer after STOP was issued at the
+		 * end of write transaction. During this time the EEPROM will not be
+		 * responsive to any more commands - so wait a bit more.
+		 */
+		msleep(10);
+
+	} else
+		dev_err(adev->dev, "aldebaran_i2c_write- error occurred :%x", ret);
+
+	return ret;
+}
+
+static int aldebaran_i2c_xfer(struct i2c_adapter *i2c_adap,
+			      struct i2c_msg *msgs, int num)
+{
+	uint32_t  i, j, ret, data_size, data_chunk_size, next_eeprom_addr = 0;
+	uint8_t *data_ptr, data_chunk[MAX_SW_I2C_COMMANDS] = { 0 };
+
+	for (i = 0; i < num; i++) {
+		/*
+		 * SMU interface allows at most MAX_SW_I2C_COMMANDS bytes of data at
+		 * once and hence the data needs to be spliced into chunks and sent each
+		 * chunk separately
+		 */
+		data_size = msgs[i].len - 2;
+		data_chunk_size = MAX_SW_I2C_COMMANDS - 2;
+		next_eeprom_addr = (msgs[i].buf[0] << 8 & 0xff00) | (msgs[i].buf[1] & 0xff);
+		data_ptr = msgs[i].buf + 2;
+
+		for (j = 0; j < data_size / data_chunk_size; j++) {
+			/* Insert the EEPROM dest addess, bits 0-15 */
+			data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff);
+			data_chunk[1] = (next_eeprom_addr & 0xff);
+
+			if (msgs[i].flags & I2C_M_RD) {
+				ret = aldebaran_i2c_read_data(i2c_adap,
+							     (uint8_t)msgs[i].addr,
+							     data_chunk, MAX_SW_I2C_COMMANDS);
+
+				memcpy(data_ptr, data_chunk + 2, data_chunk_size);
+			} else {
+
+				memcpy(data_chunk + 2, data_ptr, data_chunk_size);
+
+				ret = aldebaran_i2c_write_data(i2c_adap,
+							      (uint8_t)msgs[i].addr,
+							      data_chunk, MAX_SW_I2C_COMMANDS);
+			}
+
+			if (ret) {
+				num = -EIO;
+				goto fail;
+			}
+
+			next_eeprom_addr += data_chunk_size;
+			data_ptr += data_chunk_size;
+		}
+
+		if (data_size % data_chunk_size) {
+			data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff);
+			data_chunk[1] = (next_eeprom_addr & 0xff);
+
+			if (msgs[i].flags & I2C_M_RD) {
+				ret = aldebaran_i2c_read_data(i2c_adap,
+							     (uint8_t)msgs[i].addr,
+							     data_chunk, (data_size % data_chunk_size) + 2);
+
+				memcpy(data_ptr, data_chunk + 2, data_size % data_chunk_size);
+			} else {
+				memcpy(data_chunk + 2, data_ptr, data_size % data_chunk_size);
+
+				ret = aldebaran_i2c_write_data(i2c_adap,
+							      (uint8_t)msgs[i].addr,
+							      data_chunk, (data_size % data_chunk_size) + 2);
+			}
+
+			if (ret) {
+				num = -EIO;
+				goto fail;
+			}
+		}
+	}
+
+fail:
+	return num;
+}
+
+static u32 aldebaran_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+
+static const struct i2c_algorithm aldebaran_i2c_algo = {
+	.master_xfer = aldebaran_i2c_xfer,
+	.functionality = aldebaran_i2c_func,
+};
+
+static int aldebaran_i2c_control_init(struct smu_context *smu, struct i2c_adapter *control)
+{
+	struct amdgpu_device *adev = to_amdgpu_device(control);
+	int res;
+
+	control->owner = THIS_MODULE;
+	control->class = I2C_CLASS_SPD;
+	control->dev.parent = &adev->pdev->dev;
+	control->algo = &aldebaran_i2c_algo;
+	snprintf(control->name, sizeof(control->name), "AMDGPU SMU");
+
+	res = i2c_add_adapter(control);
+	if (res)
+		DRM_ERROR("Failed to register hw i2c, err: %d\n", res);
+
+	return res;
+}
+
+static void aldebaran_i2c_control_fini(struct smu_context *smu, struct i2c_adapter *control)
+{
+	i2c_del_adapter(control);
+}
+
 static void aldebaran_get_unique_id(struct smu_context *smu)
 {
 	struct amdgpu_device *adev = smu->adev;
@@ -1585,6 +1812,8 @@ static const struct pptable_funcs aldebaran_ppt_funcs = {
 	.set_mp1_state = aldebaran_set_mp1_state,
 	.mode2_reset = aldebaran_mode2_reset,
 	.wait_for_event = smu_v13_0_wait_for_event,
+	.i2c_init = aldebaran_i2c_control_init,
+	.i2c_fini = aldebaran_i2c_control_fini,
 };
 
 void aldebaran_set_ppt_funcs(struct smu_context *smu)