diff options
Diffstat (limited to 'include/drm/drm_mipi_dsi.h')
| -rw-r--r-- | include/drm/drm_mipi_dsi.h | 122 |
1 files changed, 104 insertions, 18 deletions
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h index 82b1cc434ea3..71d121aeef24 100644 --- a/include/drm/drm_mipi_dsi.h +++ b/include/drm/drm_mipi_dsi.h @@ -197,6 +197,27 @@ struct mipi_dsi_device { struct drm_dsc_config *dsc; }; +/** + * struct mipi_dsi_multi_context - Context to call multiple MIPI DSI funcs in a row + */ +struct mipi_dsi_multi_context { + /** + * @dsi: Pointer to the MIPI DSI device + */ + struct mipi_dsi_device *dsi; + + /** + * @accum_err: Storage for the accumulated error over the multiple calls + * + * Init to 0. If a function encounters an error then the error code + * will be stored here. If you call a function and this points to a + * non-zero value then the function will be a noop. This allows calling + * a function many times in a row and just checking the error at the + * end to see if any of them failed. + */ + int accum_err; +}; + #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:" #define to_mipi_dsi_device(__dev) container_of_const(__dev, struct mipi_dsi_device, dev) @@ -254,11 +275,28 @@ int mipi_dsi_compression_mode_ext(struct mipi_dsi_device *dsi, bool enable, int mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi, const struct drm_dsc_picture_parameter_set *pps); +void mipi_dsi_compression_mode_ext_multi(struct mipi_dsi_multi_context *ctx, + bool enable, + enum mipi_dsi_compression_algo algo, + unsigned int pps_selector); +void mipi_dsi_picture_parameter_set_multi(struct mipi_dsi_multi_context *ctx, + const struct drm_dsc_picture_parameter_set *pps); + ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, size_t size); +int mipi_dsi_generic_write_chatty(struct mipi_dsi_device *dsi, + const void *payload, size_t size); +void mipi_dsi_generic_write_multi(struct mipi_dsi_multi_context *ctx, + const void *payload, size_t size); ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, size_t num_params, void *data, size_t size); +#define mipi_dsi_msleep(ctx, delay) \ + do { \ + if (!(ctx)->accum_err) \ + msleep(delay); \ + } while (0) + /** * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking @@ -279,6 +317,10 @@ enum mipi_dsi_dcs_tear_mode { ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, const void *data, size_t len); +int mipi_dsi_dcs_write_buffer_chatty(struct mipi_dsi_device *dsi, + const void *data, size_t len); +void mipi_dsi_dcs_write_buffer_multi(struct mipi_dsi_multi_context *ctx, + const void *data, size_t len); ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, const void *data, size_t len); ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, @@ -309,42 +351,86 @@ int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi, int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi, u16 *brightness); +void mipi_dsi_dcs_nop_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_enter_sleep_mode_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_exit_sleep_mode_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_set_display_off_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_set_display_on_multi(struct mipi_dsi_multi_context *ctx); +void mipi_dsi_dcs_set_tear_on_multi(struct mipi_dsi_multi_context *ctx, + enum mipi_dsi_dcs_tear_mode mode); + /** * mipi_dsi_generic_write_seq - transmit data using a generic write packet + * + * This macro will print errors for you and will RETURN FROM THE CALLING + * FUNCTION (yes this is non-intuitive) upon error. + * + * Because of the non-intuitive return behavior, THIS MACRO IS DEPRECATED. + * Please replace calls of it with mipi_dsi_generic_write_seq_multi(). + * * @dsi: DSI peripheral device * @seq: buffer containing the payload */ #define mipi_dsi_generic_write_seq(dsi, seq...) \ do { \ static const u8 d[] = { seq }; \ - struct device *dev = &dsi->dev; \ int ret; \ - ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \ - if (ret < 0) { \ - dev_err_ratelimited(dev, "transmit data failed: %d\n", \ - ret); \ + ret = mipi_dsi_generic_write_chatty(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ return ret; \ - } \ + } while (0) + +/** + * mipi_dsi_generic_write_seq_multi - transmit data using a generic write packet + * + * This macro will print errors for you and error handling is optimized for + * callers that call this multiple times in a row. + * + * @ctx: Context for multiple DSI transactions + * @seq: buffer containing the payload + */ +#define mipi_dsi_generic_write_seq_multi(ctx, seq...) \ + do { \ + static const u8 d[] = { seq }; \ + mipi_dsi_generic_write_multi(ctx, d, ARRAY_SIZE(d)); \ } while (0) /** * mipi_dsi_dcs_write_seq - transmit a DCS command with payload + * + * This macro will print errors for you and will RETURN FROM THE CALLING + * FUNCTION (yes this is non-intuitive) upon error. + * + * Because of the non-intuitive return behavior, THIS MACRO IS DEPRECATED. + * Please replace calls of it with mipi_dsi_dcs_write_seq_multi(). + * * @dsi: DSI peripheral device * @cmd: Command * @seq: buffer containing data to be transmitted */ -#define mipi_dsi_dcs_write_seq(dsi, cmd, seq...) \ - do { \ - static const u8 d[] = { cmd, seq }; \ - struct device *dev = &dsi->dev; \ - int ret; \ - ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ - if (ret < 0) { \ - dev_err_ratelimited( \ - dev, "sending command %#02x failed: %d\n", \ - cmd, ret); \ - return ret; \ - } \ +#define mipi_dsi_dcs_write_seq(dsi, cmd, seq...) \ + do { \ + static const u8 d[] = { cmd, seq }; \ + int ret; \ + ret = mipi_dsi_dcs_write_buffer_chatty(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +/** + * mipi_dsi_dcs_write_seq_multi - transmit a DCS command with payload + * + * This macro will print errors for you and error handling is optimized for + * callers that call this multiple times in a row. + * + * @ctx: Context for multiple DSI transactions + * @cmd: Command + * @seq: buffer containing data to be transmitted + */ +#define mipi_dsi_dcs_write_seq_multi(ctx, cmd, seq...) \ + do { \ + static const u8 d[] = { cmd, seq }; \ + mipi_dsi_dcs_write_buffer_multi(ctx, d, ARRAY_SIZE(d)); \ } while (0) /** |