summaryrefslogtreecommitdiff
path: root/net/core
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29Merge tag 'net-5.10-rc2' of ↵Linus Torvalds1-11/+19
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release regressions: - r8169: fix forced threading conflicting with other shared interrupts; we tried to fix the use of raise_softirq_irqoff from an IRQ handler on RT by forcing hard irqs, but this driver shares legacy PCI IRQs so drop the _irqoff() instead - tipc: fix memory leak caused by a recent syzbot report fix to tipc_buf_append() Current release - bugs in new features: - devlink: Unlock on error in dumpit() and fix some error codes - net/smc: fix null pointer dereference in smc_listen_decline() Previous release - regressions: - tcp: Prevent low rmem stalls with SO_RCVLOWAT. - net: protect tcf_block_unbind with block lock - ibmveth: Fix use of ibmveth in a bridge; the self-imposed filtering to only send legal frames to the hypervisor was too strict - net: hns3: Clear the CMDQ registers before unmapping BAR region; incorrect cleanup order was leading to a crash - bnxt_en - handful of fixes to fixes: - Send HWRM_FUNC_RESET fw command unconditionally, even if there are PCIe errors being reported - Check abort error state in bnxt_open_nic(). - Invoke cancel_delayed_work_sync() for PFs also. - Fix regression in workqueue cleanup logic in bnxt_remove_one(). - mlxsw: Only advertise link modes supported by both driver and device, after removal of 56G support from the driver 56G was not cleared from advertised modes - net/smc: fix suppressed return code Previous release - always broken: - netem: fix zero division in tabledist, caused by integer overflow - bnxt_en: Re-write PCI BARs after PCI fatal error. - cxgb4: set up filter action after rewrites - net: ipa: command payloads already mapped Misc: - s390/ism: fix incorrect system EID, it's okay to change since it was added in current release - vsock: use ns_capable_noaudit() on socket create to suppress false positive audit messages" * tag 'net-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) r8169: fix issue with forced threading in combination with shared interrupts netem: fix zero division in tabledist ibmvnic: fix ibmvnic_set_mac mptcp: add missing memory scheduling in the rx path tipc: fix memory leak caused by tipc_buf_append() gtp: fix an use-before-init in gtp_newlink() net: protect tcf_block_unbind with block lock ibmveth: Fix use of ibmveth in a bridge. net/sched: act_mpls: Add softdep on mpls_gso.ko ravb: Fix bit fields checking in ravb_hwtstamp_get() devlink: Unlock on error in dumpit() devlink: Fix some error codes chelsio/chtls: fix memory leaks in CPL handlers chelsio/chtls: fix deadlock issue net: hns3: Clear the CMDQ registers before unmapping BAR region bnxt_en: Send HWRM_FUNC_RESET fw command unconditionally. bnxt_en: Check abort error state in bnxt_open_nic(). bnxt_en: Re-write PCI BARs after PCI fatal error. bnxt_en: Invoke cancel_delayed_work_sync() for PFs also. bnxt_en: Fix regression in workqueue cleanup logic in bnxt_remove_one(). ...
2020-10-27devlink: Unlock on error in dumpit()Dan Carpenter1-2/+4
This needs to unlock before returning. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27devlink: Fix some error codesDan Carpenter1-9/+15
These paths don't set the error codes. It's especially important in devlink_nl_region_notify_build() where it leads to a NULL dereference in the caller. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080059.GA1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-24random32: add noise from network and scheduling activityWilly Tarreau1-0/+4
With the removal of the interrupt perturbations in previous random32 change (random32: make prandom_u32() output unpredictable), the PRNG has become 100% deterministic again. While SipHash is expected to be way more robust against brute force than the previous Tausworthe LFSR, there's still the risk that whoever has even one temporary access to the PRNG's internal state is able to predict all subsequent draws till the next reseed (roughly every minute). This may happen through a side channel attack or any data leak. This patch restores the spirit of commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") in that it will perturb the internal PRNG's statee using externally collected noise, except that it will not pick that noise from the random pool's bits nor upon interrupt, but will rather combine a few elements along the Tx path that are collectively hard to predict, such as dev, skb and txq pointers, packet length and jiffies values. These ones are combined using a single round of SipHash into a single long variable that is mixed with the net_rand_state upon each invocation. The operation was inlined because it produces very small and efficient code, typically 3 xor, 2 add and 2 rol. The performance was measured to be the same (even very slightly better) than before the switch to SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC (i40e), the connection rate dropped from 556k/s to 555k/s while the SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-22net: Properly typecast int values to set sk_max_pacing_rateKe Li2-2/+3
In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate, after extended from 'u32' to 'unsigned long', takes unintentionally hiked value whenever assigned from an 'int' value with MSB=1, due to binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes 0xFFFFFFFF80000000. Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return ~0U unexpectedly. It may also result in increased pacing rate. Fix by explicitly casting the 'int' value to 'unsigned int' before assigning it to sk_max_pacing_rate, for zero extension to happen. Fixes: 76a9ebe811fb ("net: extend sk_pacing_rate to unsigned long") Signed-off-by: Ji Li <jli@akamai.com> Signed-off-by: Ke Li <keli@akamai.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-59/+99
Daniel Borkmann says: ==================== pull-request: bpf 2020-10-22 1) Fix enforcing NULL check in verifier for new helper return types of RET_PTR_TO_{BTF_ID,MEM_OR_BTF_ID}_OR_NULL, from Martin KaFai Lau. 2) Fix bpf_redirect_neigh() helper API before it becomes frozen by adding nexthop information as argument, from Toke Høiland-Jørgensen. 3) Guard & fix compilation of bpf_tail_call_static() when __bpf__ arch is not defined by compiler or clang too old, from Daniel Borkmann. 4) Remove misplaced break after return in attach_type_to_prog_type(), from Tom Rix. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-21rtnetlink: fix data overflow in rtnl_calcit()Di Zhu1-7/+6
"ip addr show" command execute error when we have a physical network card with a large number of VFs The return value of if_nlmsg_size() in rtnl_calcit() will exceed range of u16 data type when any network cards has a larger number of VFs. rtnl_vfinfo_size() will significant increase needed dump size when the value of num_vfs is larger. Eventually we get a wrong value of min_ifinfo_dump_size because of overflow which decides the memory size needed by netlink dump and netlink_dump() will return -EMSGSIZE because of not enough memory was allocated. So fix it by promoting min_dump_alloc data type to u32 to avoid whole netlink message size overflow and it's also align with the data type of struct netlink_callback{}.min_dump_alloc which is assigned by return value of rtnl_calcit() Signed-off-by: Di Zhu <zhudi21@huawei.com> Link: https://lore.kernel.org/r/20201021020053.1401-1-zhudi21@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22bpf: Fix bpf_redirect_neigh helper api to support supplying nexthopToke Høiland-Jørgensen1-59/+99
Based on the discussion in [0], update the bpf_redirect_neigh() helper to accept an optional parameter specifying the nexthop information. This makes it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without incurring a duplicate FIB lookup - since the FIB lookup helper will return the nexthop information even if no neighbour is present, this can simply be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen. [0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/ Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk
2020-10-18net: core: use list_del_init() instead of list_del() in netdev_run_todo()Taehee Yoo1-1/+1
dev->unlink_list is reused unless dev is deleted. So, list_del() should not be used. Due to using list_del(), dev->unlink_list can't be reused so that dev->nested_level update logic doesn't work. In order to fix this bug, list_del_init() should be used instead of list_del(). Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond0 master bond1 ip link set bond0 nomaster ip link set bond1 master bond0 ip link set bond1 nomaster Splat looks like: [ 255.750458][ T1030] ============================================ [ 255.751967][ T1030] WARNING: possible recursive locking detected [ 255.753435][ T1030] 5.9.0-rc8+ #772 Not tainted [ 255.754553][ T1030] -------------------------------------------- [ 255.756047][ T1030] ip/1030 is trying to acquire lock: [ 255.757304][ T1030] ffff88811782a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync_multiple+0xc2/0x150 [ 255.760056][ T1030] [ 255.760056][ T1030] but task is already holding lock: [ 255.761862][ T1030] ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.764581][ T1030] [ 255.764581][ T1030] other info that might help us debug this: [ 255.766645][ T1030] Possible unsafe locking scenario: [ 255.766645][ T1030] [ 255.768566][ T1030] CPU0 [ 255.769415][ T1030] ---- [ 255.770259][ T1030] lock(&dev_addr_list_lock_key/1); [ 255.771629][ T1030] lock(&dev_addr_list_lock_key/1); [ 255.772994][ T1030] [ 255.772994][ T1030] *** DEADLOCK *** [ 255.772994][ T1030] [ 255.775091][ T1030] May be due to missing lock nesting notation [ 255.775091][ T1030] [ 255.777182][ T1030] 2 locks held by ip/1030: [ 255.778299][ T1030] #0: ffffffffb1f63250 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x2e4/0x8b0 [ 255.780600][ T1030] #1: ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.783411][ T1030] [ 255.783411][ T1030] stack backtrace: [ 255.784874][ T1030] CPU: 7 PID: 1030 Comm: ip Not tainted 5.9.0-rc8+ #772 [ 255.786595][ T1030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 255.789030][ T1030] Call Trace: [ 255.789850][ T1030] dump_stack+0x99/0xd0 [ 255.790882][ T1030] __lock_acquire.cold.71+0x166/0x3cc [ 255.792285][ T1030] ? register_lock_class+0x1a30/0x1a30 [ 255.793619][ T1030] ? rcu_read_lock_sched_held+0x91/0xc0 [ 255.794963][ T1030] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 255.796246][ T1030] lock_acquire+0x1b8/0x850 [ 255.797332][ T1030] ? dev_mc_sync_multiple+0xc2/0x150 [ 255.798624][ T1030] ? bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.800039][ T1030] ? check_flags+0x50/0x50 [ 255.801143][ T1030] ? lock_contended+0xd80/0xd80 [ 255.802341][ T1030] _raw_spin_lock_nested+0x2e/0x70 [ 255.803592][ T1030] ? dev_mc_sync_multiple+0xc2/0x150 [ 255.804897][ T1030] dev_mc_sync_multiple+0xc2/0x150 [ 255.806168][ T1030] bond_enslave+0x3d58/0x43e0 [bonding] [ 255.807542][ T1030] ? __lock_acquire+0xe53/0x51b0 [ 255.808824][ T1030] ? bond_update_slave_arr+0xdc0/0xdc0 [bonding] [ 255.810451][ T1030] ? check_chain_key+0x236/0x5e0 [ 255.811742][ T1030] ? mutex_is_locked+0x13/0x50 [ 255.812910][ T1030] ? rtnl_is_locked+0x11/0x20 [ 255.814061][ T1030] ? netdev_master_upper_dev_get+0xf/0x120 [ 255.815553][ T1030] do_setlink+0x94c/0x3040 [ ... ] Reported-by: syzbot+4a0f7bc34e3997a6c7df@syzkaller.appspotmail.com Fixes: 1fc70edb7d7b ("net: core: add nested_level variable in net_device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201015162606.9377-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds19-1196/+2705
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-7/+17
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-10-15 The main changes are: 1) Fix register equivalence tracking in verifier, from Alexei Starovoitov. 2) Fix sockmap error path to not call bpf_prog_put() with NULL, from Alex Dewar. 3) Fix sockmap to add locking annotations to iterator, from Lorenz Bauer. 4) Fix tcp_hdr_options test to use loopback address, from Martin KaFai Lau. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+3
Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15net, sockmap: Don't call bpf_prog_put() on NULL pointerAlex Dewar1-7/+9
If bpf_prog_inc_not_zero() fails for skb_parser, then bpf_prog_put() is called unconditionally on skb_verdict, even though it may be NULL. Fix and tidy up error path. Fixes: 743df8b7749f ("bpf, sockmap: Check skb_verdict and skb_parser programs explicitly") Addresses-Coverity-ID: 1497799: Null pointer dereferences (FORWARD_NULL) Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201012170952.60750-1-alex.dewar90@gmail.com
2020-10-15bpf, sockmap: Add locking annotations to iteratorLorenz Bauer1-0/+8
The sparse checker currently outputs the following warnings: include/linux/rcupdate.h:632:9: sparse: sparse: context imbalance in 'sock_hash_seq_start' - wrong count at exit include/linux/rcupdate.h:632:9: sparse: sparse: context imbalance in 'sock_map_seq_start' - wrong count at exit Add the necessary __acquires and __release annotations to make the iterator locking schema palatable to sparse. Also add __must_hold for good measure. The kernel codebase uses both __acquires(rcu) and __acquires(RCU). I couldn't find any guidance which one is preferred, so I used what is easier to type out. Fixes: 0365351524d7 ("net: Allow iterating sockmap and sockhash") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20201012091850.67452-1-lmb@cloudflare.com
2020-10-13net: add function dev_fetch_sw_netstats for fetching pcpu_sw_netstatsHeiner Kallweit1-0/+34
In several places the same code is used to populate rtnl_link_stats64 fields with data from pcpu_sw_netstats. Therefore factor out this code to a new function dev_fetch_sw_netstats(). v2: - constify argument netstats - don't ignore netstats being NULL or an ERRPTR - switch to EXPORT_SYMBOL_GPL Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6d16a338-52f5-df69-0020-6bc771a7d498@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13socket: don't clear SOCK_TSTAMP_NEW when SO_TIMESTAMPNS is disabledChristian Eggers1-1/+0
SOCK_TSTAMP_NEW (timespec64 instead of timespec) is also used for hardware time stamps (configured via SO_TIMESTAMPING_NEW). User space (ptp4l) first configures hardware time stamping via SO_TIMESTAMPING_NEW which sets SOCK_TSTAMP_NEW. In the next step, ptp4l disables SO_TIMESTAMPNS(_NEW) (software time stamps), but this must not switch hardware time stamps back to "32 bit mode". This problem happens on 32 bit platforms were the libc has already switched to struct timespec64 (from SO_TIMExxx_OLD to SO_TIMExxx_NEW socket options). ptp4l complains with "missing timestamp on transmitted peer delay request" because the wrong format is received (and discarded). Fixes: 887feae36aee ("socket: Add SO_TIMESTAMP[NS]_NEW") Fixes: 783da70e8396 ("net: add sock_enable_timestamps") Signed-off-by: Christian Eggers <ceggers@arri.de> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13socket: fix option SO_TIMESTAMPING_NEWChristian Eggers1-7/+3
The comparison of optname with SO_TIMESTAMPING_NEW is wrong way around, so SOCK_TSTAMP_NEW will first be set and than reset again. Additionally move it out of the test for SOF_TIMESTAMPING_RX_SOFTWARE as this seems unrelated. This problem happens on 32 bit platforms were the libc has already switched to struct timespec64 (from SO_TIMExxx_OLD to SO_TIMExxx_NEW socket options). ptp4l complains with "missing timestamp on transmitted peer delay request" because the wrong format is received (and discarded). Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Reviewed-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-12Merge branch 'work.csum_and_copy' of ↵Linus Torvalds1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull copy_and_csum cleanups from Al Viro: "Saner calling conventions for csum_and_copy_..._user() and friends" [ Removing 800+ lines of code and cleaning stuff up is good - Linus ] * 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ppc: propagate the calling conventions change down to csum_partial_copy_generic() amd64: switch csum_partial_copy_generic() to new calling conventions sparc64: propagate the calling convention changes down to __csum_partial_copy_...() xtensa: propagate the calling conventions change down into csum_partial_copy_generic() mips: propagate the calling convention change down into __csum_partial_copy_..._user() mips: __csum_partial_copy_kernel() has no users left mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic() i386: propagate the calling conventions change down to csum_partial_copy_generic() sh: propage the calling conventions change down to csum_partial_copy_generic() m68k: get rid of zeroing destination on error in csum_and_copy_from_user() arm: propagate the calling convention changes down to csum_partial_copy_from_user() alpha: propagate the calling convention changes down to csum_partial_copy.c helpers saner calling conventions for csum_and_copy_..._user() csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum csum_partial_copy_nocheck(): drop the last argument unify generic instances of csum_partial_copy_nocheck() icmp_push_reply(): reorder adding the checksum up skb_copy_and_csum_bits(): don't bother with the last argument
2020-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski4-63/+257
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-10-12 The main changes are: 1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong. 2) libbpf relocation support for different size load/store, from Andrii. 3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel. 4) BPF support for per-cpu variables, form Hao. 5) sockmap improvements, from John. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11bpf, sockmap: Allow skipping sk_skb parser programJohn Fastabend2-7/+93
Currently, we often run with a nop parser namely one that just does this, 'return skb->len'. This happens when either our verdict program can handle streaming data or it is only looking at socket data such as IP addresses and other metadata associated with the flow. The second case is common for a L3/L4 proxy for instance. So lets allow loading programs without the parser then we can skip the stream parser logic and avoid having to add a BPF program that is effectively a nop. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160239297866.8495.13345662302749219672.stgit@john-Precision-5820-Tower
2020-10-11bpf, sockmap: Check skb_verdict and skb_parser programs explicitlyJohn Fastabend1-7/+8
We are about to allow skb_verdict to run without skb_parser programs as a first step change code to check each program type specifically. This should be a mechanical change without any impact to actual result. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160239294756.8495.5796595770890272219.stgit@john-Precision-5820-Tower
2020-10-11bpf, sockmap: Add memory accounting so skbs on ingress lists are visibleJohn Fastabend1-16/+15
Move skb->sk assignment out of sk_psock_bpf_run() and into individual callers. Then we can use proper skb_set_owner_r() call to assign a sk to a skb. This improves things by also charging the truesize against the sockets sk_rmem_alloc counter. With this done we get some accounting in place to ensure the memory associated with skbs on the workqueue are still being accounted for somewhere. Finally, by using skb_set_owner_r the destructor is setup so we can just let the normal skb_kfree logic recover the memory. Combined with previous patch dropping skb_orphan() we now can recover from memory pressure and maintain accounting. Note, we will charge the skbs against their originating socket even if being redirected into another socket. Once the skb completes the redirect op the kfree_skb will give the memory back. This is important because if we charged the socket we are redirecting to (like it was done before this series) the sock_writeable() test could fail because of the skb trying to be sent is already charged against the socket. Also TLS case is special. Here we wait until we have decided not to simply PASS the packet up the stack. In the case where we PASS the packet up the stack we already have an skb which is accounted for on the TLS socket context. For the parser case we continue to just set/clear skb->sk this is because the skb being used here may be combined with other skbs or turned into multiple skbs depending on the parser logic. For example the parser could request a payload length greater than skb->len so that the strparser needs to collect multiple skbs. At any rate the final result will be handled in the strparser recv callback. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226867513.5692.10579573214635925960.stgit@john-Precision-5820-Tower
2020-10-11bpf, sockmap: Remove skb_orphan and let normal skb_kfree do cleanupJohn Fastabend1-7/+7
Calling skb_orphan() is unnecessary in the strp rcv handler because the skb is from a skb_clone() in __strp_recv. So it never has a destructor or a sk assigned. Plus its confusing to read because it might hint to the reader that the skb could have an sk assigned which is not true. Even if we did have an sk assigned it would be cleaner to simply wait for the upcoming kfree_skb(). Additionally, move the comment about strparser clone up so its closer to the logic it is describing and add to it so that it is more complete. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226865548.5692.9098315689984599579.stgit@john-Precision-5820-Tower
2020-10-11bpf, sockmap: Remove dropped data on errors in redirect caseJohn Fastabend1-14/+14
In the sk_skb redirect case we didn't handle the case where we overrun the sk_rmem_alloc entry on ingress redirect or sk_wmem_alloc on egress. Because we didn't have anything implemented we simply dropped the skb. This meant data could be dropped if socket memory accounting was in place. This fixes the above dropped data case by moving the memory checks later in the code where we actually do the send or recv. This pushes those checks into the workqueue and allows us to return an EAGAIN error which in turn allows us to try again later from the workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226863689.5692.13861422742592309285.stgit@john-Precision-5820-Tower
2020-10-11bpf, sockmap: Remove skb_set_owner_w wmem will be taken later from sendpageJohn Fastabend1-2/+0
The skb_set_owner_w is unnecessary here. The sendpage call will create a fresh skb and set the owner correctly from workqueue. Its also not entirely harmless because it consumes cycles, but also impacts resource accounting by increasing sk_wmem_alloc. This is charging the socket we are going to send to for the skb, but we will put it on the workqueue for some time before this happens so we are artifically inflating sk_wmem_alloc for this period. Further, we don't know how many skbs will be used to send the packet or how it will be broken up when sent over the new socket so charging it with one big sum is also not correct when the workqueue may break it up if facing memory pressure. Seeing we don't know how/when this is going to be sent drop the early accounting. A later patch will do proper accounting charged on receive socket for the case where skbs get enqueued on the workqueue. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226861708.5692.17964237936462425136.stgit@john-Precision-5820-Tower
2020-10-11bpf, sockmap: On receive programs try to fast track SK_PASS ingressJohn Fastabend1-2/+15
When we receive an skb and the ingress skb verdict program returns SK_PASS we currently set the ingress flag and put it on the workqueue so it can be turned into a sk_msg and put on the sk_msg ingress queue. Then finally telling userspace with data_ready hook. Here we observe that if the workqueue is empty then we can try to convert into a sk_msg type and call data_ready directly without bouncing through a workqueue. Its a common pattern to have a recv verdict program for visibility that always returns SK_PASS. In this case unless there is an ENOMEM error or we overrun the socket we can avoid the workqueue completely only using it when we fall back to error cases caused by memory pressure. By doing this we eliminate another case where data may be dropped if errors occur on memory limits in workqueue. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226859704.5692.12929678876744977669.stgit@john-Precision-5820-Tower
2020-10-11bpf, sockmap: Skb verdict SK_PASS to self already checked rmem limitsJohn Fastabend1-9/+6
For sk_skb case where skb_verdict program returns SK_PASS to continue to pass packet up the stack, the memory limits were already checked before enqueuing in skb_queue_tail from TCP side. So, lets remove the extra checks here. The theory is if the TCP stack believes we have memory to receive the packet then lets trust the stack and not double check the limits. In fact the accounting here can cause a drop if sk_rmem_alloc has increased after the stack accepted this packet, but before the duplicate check here. And worse if this happens because TCP stack already believes the data has been received there is no retransmit. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160226857664.5692.668205469388498375.stgit@john-Precision-5820-Tower
2020-10-11bpf: Always return target ifindex in bpf_fib_lookupToke Høiland-Jørgensen1-1/+2
The bpf_fib_lookup() helper performs a neighbour lookup for the destination IP and returns BPF_FIB_LKUP_NO_NEIGH if this fails, with the expectation that the BPF program will pass the packet up the stack in this case. However, with the addition of bpf_redirect_neigh() that can be used instead to perform the neighbour lookup, at the cost of a bit of duplicated work. For that we still need the target ifindex, and since bpf_fib_lookup() already has that at the time it performs the neighbour lookup, there is really no reason why it can't just return it in any case. So let's just always return the ifindex if the FIB lookup itself succeeds. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Link: https://lore.kernel.org/bpf/20201009184234.134214-1-toke@redhat.com
2020-10-11bpf: Add redirect_peer helperDaniel Borkmann2-10/+59
Add an efficient ingress to ingress netns switch that can be used out of tc BPF programs in order to redirect traffic from host ns ingress into a container veth device ingress without having to go via CPU backlog queue [0]. For local containers this can also be utilized and path via CPU backlog queue only needs to be taken once, not twice. On a high level this borrows from ipvlan which does similar switch in __netif_receive_skb_core() and then iterates via another_round. This helps to reduce latency for mentioned use cases. Pod to remote pod with redirect(), TCP_RR [1]: # percpu_netperf 10.217.1.33 RT_LATENCY: 122.450 (per CPU: 122.666 122.401 122.333 122.401 ) MEAN_LATENCY: 121.210 (per CPU: 121.100 121.260 121.320 121.160 ) STDDEV_LATENCY: 120.040 (per CPU: 119.420 119.910 125.460 115.370 ) MIN_LATENCY: 46.500 (per CPU: 47.000 47.000 47.000 45.000 ) P50_LATENCY: 118.500 (per CPU: 118.000 119.000 118.000 119.000 ) P90_LATENCY: 127.500 (per CPU: 127.000 128.000 127.000 128.000 ) P99_LATENCY: 130.750 (per CPU: 131.000 131.000 129.000 132.000 ) TRANSACTION_RATE: 32666.400 (per CPU: 8152.200 8169.842 8174.439 8169.897 ) Pod to remote pod with redirect_peer(), TCP_RR: # percpu_netperf 10.217.1.33 RT_LATENCY: 44.449 (per CPU: 43.767 43.127 45.279 45.622 ) MEAN_LATENCY: 45.065 (per CPU: 44.030 45.530 45.190 45.510 ) STDDEV_LATENCY: 84.823 (per CPU: 66.770 97.290 84.380 90.850 ) MIN_LATENCY: 33.500 (per CPU: 33.000 33.000 34.000 34.000 ) P50_LATENCY: 43.250 (per CPU: 43.000 43.000 43.000 44.000 ) P90_LATENCY: 46.750 (per CPU: 46.000 47.000 47.000 47.000 ) P99_LATENCY: 52.750 (per CPU: 51.000 54.000 53.000 53.000 ) TRANSACTION_RATE: 90039.500 (per CPU: 22848.186 23187.089 22085.077 21919.130 ) [0] https://linuxplumbersconf.org/event/7/contributions/674/attachments/568/1002/plumbers_2020_cilium_load_balancer.pdf [1] https://github.com/borkmann/netperf_scripts/blob/master/percpu_netperf Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201010234006.7075-3-daniel@iogearbox.net
2020-10-09devlink: Add enable_remote_dev_reset generic parameterMoshe Shemesh1-0/+5
The enable_remote_dev_reset devlink param flags that the host admin allows device resets that can be initiated by other hosts. This parameter is useful for setups where a device is shared by different hosts, such as multi-host setup. Once the user set this parameter to false, the driver should NACK any attempt to reset the device while the driver is loaded. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add remote reload statsMoshe Shemesh1-6/+54
Add remote reload stats to hold the history of actions performed due devlink reload commands initiated by remote host. For example, in case firmware activation with reset finished successfully but was initiated by remote host. The function devlink_remote_reload_actions_performed() is exported to enable drivers update on remote reload actions performed as it was not initiated by their own devlink instance. Expose devlink remote reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 remote_reload: driver_reinit 0 fw_activate 0 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 remote_reload: driver_reinit 1 fw_activate 1 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 0, "fw_activate": 0, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 1, "fw_activate": 1, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add reload statsMoshe Shemesh1-0/+90
Add reload stats to hold the history per reload action type and limit. For example, the number of times fw_activate has been performed on this device since the driver module was added or if the firmware activation was performed with or without reset. Add devlink notification on stats update. Expose devlink reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add devlink reload limit optionMoshe Shemesh1-6/+86
Add reload limit to demand restrictions on reload actions. Reload limits supported: no_reset: No reset allowed, no down time allowed, no link flap and no configuration is lost. By default reload limit is unspecified and so no constraints on reload actions are required. Some combinations of action and limit are invalid. For example, driver can not reinitialize its entities without any downtime. The no_reset reload limit will have usecase in this patchset to implement restricted fw_activate on mlx5. Have the uapi parameter of reload limit ready for future support of multiselection. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add reload action option to devlink reload commandMoshe Shemesh1-6/+92
Add devlink reload action to allow the user to request a specific reload action. The action parameter is optional, if not specified then devlink driver re-init action is used (backward compatible). Note that when required to do firmware activation some drivers may need to reload the driver. On the other hand some drivers may need to reset the firmware to reinitialize the driver entities. Therefore, the devlink reload command returns the actions which were actually performed. Reload actions supported are: driver_reinit: driver entities re-initialization, applying devlink-param and devlink-resource values. fw_activate: firmware activate. command examples: $devlink dev reload pci/0000:82:00.0 action driver_reinit reload_actions_performed: driver_reinit $devlink dev reload pci/0000:82:00.0 action fw_activate reload_actions_performed: driver_reinit fw_activate Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Change devlink_reload_supported() param typeMoshe Shemesh1-7/+7
Change devlink_reload_supported() function to get devlink_ops pointer param instead of devlink pointer param. This change will be used in the next patch to check if devlink reload is supported before devlink instance is allocated. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09bpf: Add tcp_notsent_lowat bpf setsockoptNikita V. Shirokov1-0/+4
Adding support for TCP_NOTSENT_LOWAT sockoption (https://lwn.net/Articles/560082/) in tcp bpf programs. Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201009070325.226855-1-tehnerd@tehnerd.com
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+6
Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski1-0/+6
Daniel Borkmann says: ==================== pull-request: bpf 2020-10-08 The main changes are: 1) Fix "unresolved symbol" build error under CONFIG_NET w/o CONFIG_INET due to missing tcp_timewait_sock and inet_timewait_sock BTF, from Yonghong Song. 2) Fix 32 bit sub-register bounds tracking for OR case, from Daniel Borkmann. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-06net: always dump full packets with skb_dumpVladimir Oltean1-5/+1
Currently skb_dump has a restriction to only dump full packet for the first 5 socket buffers, then only headers will be printed. Remove this arbitrary and confusing restriction, which is only documented vaguely ("up to") in the comments above the prototype. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-50/+130
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net/core: check length before updating Ethertype in skb_mpls_{push,pop}Guillaume Nault1-2/+2
Openvswitch allows to drop a packet's Ethernet header, therefore skb_mpls_push() and skb_mpls_pop() might be called with ethernet=true and mac_len=0. In that case the pointer passed to skb_mod_eth_type() doesn't point to an Ethernet header and the new Ethertype is written at unexpected locations. Fix this by verifying that mac_len is big enough to contain an Ethernet header. Fixes: fa4e0f8855fc ("net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions") Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net: devlink: Add support for port regionsAndrew Lunn1-26/+224
Allow regions to be registered to a devlink port. The same netlink API is used, but the port index is provided to indicate when a region is a port region as opposed to a device region. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net: devlink: Add unused port flavourAndrew Lunn1-1/+3
Not all ports of a switch need to be used, particularly in embedded systems. Add a port flavour for ports which physically exist in the switch, but are not connected to the front panel etc, and so are unused. By having unused ports present in devlink, it gives a more accurate representation of the hardware. It also allows regions to be associated to such ports, so allowing, for example, to determine unused ports are correctly powered off, or to compare probable reset defaults of unused ports to used ports experiences issues. Actually registering unused ports and setting the flavour to unused is optional. The DSA core will register all such switch ports, but such ports are expected to be limited in number. Bigger ASICs may decide not to list unused ports. v2: Expand the description about why it is useful Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03net/sched: act_vlan: Add {POP,PUSH}_ETH actionsGuillaume Nault1-0/+67
Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to respectively pop and push a base Ethernet header at the beginning of a frame. POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any, must be stripped before calling POP_ETH. PUSH_ETH is restricted to skbs with no mac_header, and only the MAC addresses can be configured. The Ethertype is automatically set from skb->protocol. These restrictions ensure that all skb's fields remain consistent, so that this action can't confuse other part of the networking stack (like GSO). Since openvswitch already had these actions, consolidate the code in skbuff.c (like for vlan and mpls push/pop). Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02genetlink: move to smaller ops wherever possibleJakub Kicinski2-6/+6
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02devlink: add .trap_group_action_set() callbackIoana Ciornei1-0/+18
Add a new devlink callback, .trap_group_action_set(), which can be used by device drivers which do not support controlling the action (drop, trap) on each trap but rather on the entire group trap. If this new callback is populated, it will take precedence over the .trap_action_set() callback when the user requests a change of all the traps in a group. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02devlink: add parser error drop packet trapsIoana Ciornei1-0/+17
Add parser error drop packet traps, so that capable device driver could register them with devlink. The new packet trap group holds any drops of packets which were marked by the device as erroneous during header parsing. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02bpf, sockmap: Add skb_adjust_room to pop bytes off ingress payloadJohn Fastabend1-0/+46
This implements a new helper skb_adjust_room() so users can push/pop extra bytes from a BPF_SK_SKB_STREAM_VERDICT program. Some protocols may include headers and other information that we may not want to include when doing a redirect from a BPF_SK_SKB_STREAM_VERDICT program. One use case is to redirect TLS packets into a receive socket that doesn't expect TLS data. In TLS case the first 13B or so contain the protocol header. With KTLS the payload is decrypted so we should be able to redirect this to a receiving socket, but the receiving socket may not be expecting to receive a TLS header and discard the data. Using the above helper we can pop the header off and put an appropriate header on the payload. This allows for creating a proxy between protocols without extra hops through the stack or userspace. So in order to fix this case add skb_adjust_room() so users can strip the header. After this the user can strip the header and an unmodified receiver thread will work correctly when data is redirected into the ingress path of a sock. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/160160099197.7052.8443193973242831692.stgit@john-Precision-5820-Tower
2020-10-01net-sysfs: Fix inconsistent of format with argument type in net-sysfs.cYe Bin1-2/+2
Fix follow warnings: [net/core/net-sysfs.c:1161]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'int'. [net/core/net-sysfs.c:1162]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'int'. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-01pktgen: Fix inconsistent of format with argument type in pktgen.cYe Bin1-5/+5
Fix follow warnings: [net/core/pktgen.c:925]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. [net/core/pktgen.c:942]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. [net/core/pktgen.c:962]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. [net/core/pktgen.c:984]: (warning) %u in format string (no. 1) requires 'unsigned int' but the argument type is 'signed int'. [net/core/pktgen.c:1149]: (warning) %d in format string (no. 1) requires 'int' but the argument type is 'unsigned int'. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-16 12:09:08 +0000