summaryrefslogtreecommitdiff
path: root/net/bpf
AgeCommit message (Collapse)AuthorFilesLines
2020-09-30bpf: fix raw_tp test run in preempt kernelSong Liu1-12/+9
In preempt kernel, BPF_PROG_TEST_RUN on raw_tp triggers: [ 35.874974] BUG: using smp_processor_id() in preemptible [00000000] code: new_name/87 [ 35.893983] caller is bpf_prog_test_run_raw_tp+0xd4/0x1b0 [ 35.900124] CPU: 1 PID: 87 Comm: new_name Not tainted 5.9.0-rc6-g615bd02bf #1 [ 35.907358] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 35.916941] Call Trace: [ 35.919660] dump_stack+0x77/0x9b [ 35.923273] check_preemption_disabled+0xb4/0xc0 [ 35.928376] bpf_prog_test_run_raw_tp+0xd4/0x1b0 [ 35.933872] ? selinux_bpf+0xd/0x70 [ 35.937532] __do_sys_bpf+0x6bb/0x21e0 [ 35.941570] ? find_held_lock+0x2d/0x90 [ 35.945687] ? vfs_write+0x150/0x220 [ 35.949586] do_syscall_64+0x2d/0x40 [ 35.953443] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by calling migrate_disable() before smp_processor_id(). Fixes: 1b4d60ec162f ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint") Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-28bpf: Enable BPF_PROG_TEST_RUN for raw_tracepointSong Liu1-0/+91
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs the target program on a specific CPU. This is achieved by a new flag in bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for BPF programs that handle perf_event and other percpu resources, as the program can access these resource locally. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200925205432.1777-2-songliubraving@fb.com
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-03bpf: Allow to specify ifindex for skb in bpf_prog_test_run_skbDmitry Yakunin1-2/+20
Now skb->dev is unconditionally set to the loopback device in current net namespace. But if we want to test bpf program which contains code branch based on ifindex condition (eg filters out localhost packets) it is useful to allow specifying of ifindex from userspace. This patch adds such option through ctx_in (__sk_buff) parameter. Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200803090545.82046-3-zeil@yandex-team.ru
2020-08-03bpf: Setup socket family and addresses in bpf_prog_test_run_skbDmitry Yakunin1-0/+21
Now it's impossible to test all branches of cgroup_skb bpf program which accesses skb->family and skb->{local,remote}_ip{4,6} fields because they are zeroed during socket allocation. This commit fills socket family and addresses from related fields in constructed skb. Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200803090545.82046-2-zeil@yandex-team.ru
2020-06-30bpf: Add tests for PTR_TO_BTF_ID vs. null comparisonYonghong Song1-1/+18
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison, one for PTR_TO_BTF_ID in the ctx structure and the other for PTR_TO_BTF_ID after one level pointer chasing. In both cases, the test ensures condition is not removed. For example, for this test struct bpf_fentry_test_t { struct bpf_fentry_test_t *a; }; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) { if (arg == 0) test7_result = 1; return 0; } Before the previous verifier change, we have xlated codes: int test7(long long unsigned int * ctx): ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) 0: (79) r1 = *(u64 *)(r1 +0) ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) 1: (b4) w0 = 0 2: (95) exit After the previous verifier change, we have: int test7(long long unsigned int * ctx): ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) 0: (79) r1 = *(u64 *)(r1 +0) ; if (arg == 0) 1: (55) if r1 != 0x0 goto pc+4 ; test7_result = 1; 2: (18) r1 = map[id:6][0]+48 4: (b7) r2 = 1 5: (7b) *(u64 *)(r1 +0) = r2 ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg) 6: (b4) w0 = 0 7: (95) exit Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200630171241.2523875-1-yhs@fb.com
2020-05-19bpf: Fix too large copy from user in bpf_test_initJesper Dangaard Brouer1-3/+5
Commit bc56c919fce7 ("bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().") recently changed bpf_prog_test_run_xdp() to use larger frames for XDP in order to test tail growing frames (via bpf_xdp_adjust_tail) and to have memory backing frame better resemble drivers. The commit contains a bug, as it tries to copy the max data size from userspace, instead of the size provided by userspace. This cause XDP unit tests to fail sporadically with EFAULT, an unfortunate behavior. The fix is to only copy the size specified by userspace. Fixes: bc56c919fce7 ("bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/158980712729.256597.6115007718472928659.stgit@firesoul
2020-05-14bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().Jesper Dangaard Brouer1-4/+12
Update the memory requirements, when adding xdp.frame_sz in BPF test_run function bpf_prog_test_run_xdp() which e.g. is used by XDP selftests. Specifically add the expected reserved tailroom, but also allocated a larger memory area to reflect that XDP frames usually comes in this format. Limit the provided packet data size to 4096 minus headroom + tailroom, as this also reflect a common 3520 bytes MTU limit with XDP. Note that bpf_test_init already use a memory allocation method that clears memory. Thus, this already guards against leaking uninit kernel memory. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/158945349549.97035.15316291762482444006.stgit@firesoul
2020-03-28bpf: Fix build warning regarding missing prototypesJean-Philippe Menil1-0/+4
Fix build warnings when building net/bpf/test_run.o with W=1 due to missing prototype for bpf_fentry_test{1..6}. Instead of declaring prototypes, turn off warnings with __diag_{push,ignore,pop} as pointed out by Alexei. Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200327204713.28050-1-jpmenil@gmail.com
2020-03-04bpf: Add selftests for BPF_MODIFY_RETURNKP Singh1-1/+21
Test for two scenarios: * When the fmod_ret program returns 0, the original function should be called along with fentry and fexit programs. * When the fmod_ret program returns a non-zero value, the original function should not be called, no side effect should be observed and fentry and fexit programs should be called. The result from the kernel function call and whether a side-effect is observed is returned via the retval attr of the BPF_PROG_TEST_RUN (bpf) syscall. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200304191853.1529-8-kpsingh@chromium.org
2020-03-04bpf: Add test ops for BPF_PROG_TYPE_TRACINGKP Singh1-9/+28
The current fexit and fentry tests rely on a different program to exercise the functions they attach to. Instead of doing this, implement the test operations for tracing which will also be used for BPF_MODIFY_RETURN in a subsequent patch. Also, clean up the fexit test to use the generated skeleton. Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200304191853.1529-7-kpsingh@chromium.org
2020-03-03bpf: Add gso_size to __sk_buffWillem de Bruijn1-0/+7
BPF programs may want to know whether an skb is gso. The canonical answer is skb_is_gso(skb), which tests that gso_size != 0. Expose this field in the same manner as gso_segs. That field itself is not a sufficient signal, as the comment in skb_shared_info makes clear: gso_segs may be zero, e.g., from dodgy sources. Also prepare net/bpf/test_run for upcoming BPF_PROG_TEST_RUN tests of the feature. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200303200503.226217-2-willemdebruijn.kernel@gmail.com
2020-02-24bpf/tests: Use migrate disable instead of preempt disableDavid Miller1-4/+4
Replace the preemption disable/enable with migrate_disable/enable() to reflect the actual requirement and to allow PREEMPT_RT to substitute it with an actual migration disable mechanism which does not disable preemption. [ tglx: Switched it over to migrate disable ] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200224145643.785306549@linutronix.de
2019-12-18bpf: Allow to change skb mark in test_runNikita V. Shirokov1-1/+9
allow to pass skb's mark field into bpf_prog_test_run ctx for BPF_PROG_TYPE_SCHED_CLS prog type. that would allow to test bpf programs which are doing decision based on this field Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-12-13bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUNStanislav Fomichev1-1/+18
wire_len should not be less than real len and is capped by GSO_MAX_SIZE. gso_segs is capped by GSO_MAX_SEGS. v2: * set wire_len to skb->len when passed wire_len is 0 (Alexei Starovoitov) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191213223028.161282-1-sdf@google.com
2019-12-13bpf: Start using the BPF dispatcher in BPF_TEST_RUNBjörn Töpel1-5/+10
In order to properly exercise the BPF dispatcher, this commit adds BPF dispatcher usage to BPF_TEST_RUN when executing XDP programs. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191213175112.30208-5-bjorn.topel@gmail.com
2019-12-11bpf: Switch to offsetofend in BPF_PROG_TEST_RUNStanislav Fomichev1-8/+4
Switch existing pattern of "offsetof(..., member) + FIELD_SIZEOF(..., member)' to "offsetofend(..., member)" which does exactly what we need without all the copy-paste. Suggested-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191210191933.105321-1-sdf@google.com
2019-11-18bpf: Fix memory leak on object 'data'Colin Ian King1-1/+3
The error return path on when bpf_fentry_test* tests fail does not kfree 'data'. Fix this by adding the missing kfree. Addresses-Coverity: ("Resource leak") Fixes: faeb2dce084a ("bpf: Add kernel test functions for fentry testing") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191118114059.37287-1-colin.king@canonical.com
2019-11-15bpf: Add kernel test functions for fentry testingAlexei Starovoitov1-0/+41
Add few kernel functions with various number of arguments, their types and sizes for BPF trampoline testing to cover different calling conventions. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20191114185720.1641606-9-ast@kernel.org
2019-10-15bpf: Allow __sk_buff tstamp in BPF_PROG_TEST_RUNStanislav Fomichev1-0/+9
It's useful for implementing EDT related tests (set tstamp, run the test, see how the tstamp is changed or observe some other parameter). Note that bpf_ktime_get_ns() helper is using monotonic clock, so for the BPF programs that compare tstamp against it, tstamp should be derived from clock_gettime(CLOCK_MONOTONIC, ...). Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191015183125.124413-1-sdf@google.com
2019-07-25bpf/flow_dissector: support flags in BPF_PROG_TEST_RUNStanislav Fomichev1-4/+35
This will allow us to write tests for those flags. v2: * Swap kfree(data) and kfree(user_ctx) (Song Liu) Acked-by: Petar Penkov <ppenkov@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Petar Penkov <ppenkov@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-25bpf/flow_dissector: pass input flags to BPF flow dissector programStanislav Fomichev1-1/+1
C flow dissector supports input flags that tell it to customize parsing by either stopping early or trying to parse as deep as possible. Pass those flags to the BPF flow dissector so it can make the same decisions. In the next commits I'll add support for those flags to our reference bpf_flow.c v3: * Export copy of flow dissector flags instead of moving (Alexei Starovoitov) Acked-by: Petar Penkov <ppenkov@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Petar Penkov <ppenkov@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 107 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-27bpf: Introduce bpf sk local storageMartin KaFai Lau1-0/+2
After allowing a bpf prog to - directly read the skb->sk ptr - get the fullsock bpf_sock by "bpf_sk_fullsock()" - get the bpf_tcp_sock by "bpf_tcp_sock()" - get the listener sock by "bpf_get_listener_sock()" - avoid duplicating the fields of "(bpf_)sock" and "(bpf_)tcp_sock" into different bpf running context. this patch is another effort to make bpf's network programming more intuitive to do (together with memory and performance benefit). When bpf prog needs to store data for a sk, the current practice is to define a map with the usual 4-tuples (src/dst ip/port) as the key. If multiple bpf progs require to store different sk data, multiple maps have to be defined. Hence, wasting memory to store the duplicated keys (i.e. 4 tuples here) in each of the bpf map. [ The smallest key could be the sk pointer itself which requires some enhancement in the verifier and it is a separate topic. ] Also, the bpf prog needs to clean up the elem when sk is freed. Otherwise, the bpf map will become full and un-usable quickly. The sk-free tracking currently could be done during sk state transition (e.g. BPF_SOCK_OPS_STATE_CB). The size of the map needs to be predefined which then usually ended-up with an over-provisioned map in production. Even the map was re-sizable, while the sk naturally come and go away already, this potential re-size operation is arguably redundant if the data can be directly connected to the sk itself instead of proxy-ing through a bpf map. This patch introduces sk->sk_bpf_storage to provide local storage space at sk for bpf prog to use. The space will be allocated when the first bpf prog has created data for this particular sk. The design optimizes the bpf prog's lookup (and then optionally followed by an inline update). bpf_spin_lock should be used if the inline update needs to be protected. BPF_MAP_TYPE_SK_STORAGE: ----------------------- To define a bpf "sk-local-storage", a BPF_MAP_TYPE_SK_STORAGE map (new in this patch) needs to be created. Multiple BPF_MAP_TYPE_SK_STORAGE maps can be created to fit different bpf progs' needs. The map enforces BTF to allow printing the sk-local-storage during a system-wise sk dump (e.g. "ss -ta") in the future. The purpose of a BPF_MAP_TYPE_SK_STORAGE map is not for lookup/update/delete a "sk-local-storage" data from a particular sk. Think of the map as a meta-data (or "type") of a "sk-local-storage". This particular "type" of "sk-local-storage" data can then be stored in any sk. The main purposes of this map are mostly: 1. Define the size of a "sk-local-storage" type. 2. Provide a similar syscall userspace API as the map (e.g. lookup/update, map-id, map-btf...etc.) 3. Keep track of all sk's storages of this "type" and clean them up when the map is freed. sk->sk_bpf_storage: ------------------ The main lookup/update/delete is done on sk->sk_bpf_storage (which is a "struct bpf_sk_storage"). When doing a lookup, the "map" pointer is now used as the "key" to search on the sk_storage->list. The "map" pointer is actually serving as the "type" of the "sk-local-storage" that is being requested. To allow very fast lookup, it should be as fast as looking up an array at a stable-offset. At the same time, it is not ideal to set a hard limit on the number of sk-local-storage "type" that the system can have. Hence, this patch takes a cache approach. The last search result from sk_storage->list is cached in sk_storage->cache[] which is a stable sized array. Each "sk-local-storage" type has a stable offset to the cache[] array. In the future, a map's flag could be introduced to do cache opt-out/enforcement if it became necessary. The cache size is 16 (i.e. 16 types of "sk-local-storage"). Programs can share map. On the program side, having a few bpf_progs running in the networking hotpath is already a lot. The bpf_prog should have already consolidated the existing sock-key-ed map usage to minimize the map lookup penalty. 16 has enough runway to grow. All sk-local-storage data will be removed from sk->sk_bpf_storage during sk destruction. bpf_sk_storage_get() and bpf_sk_storage_delete(): ------------------------------------------------ Instead of using bpf_map_(lookup|update|delete)_elem(), the bpf prog needs to use the new helper bpf_sk_storage_get() and bpf_sk_storage_delete(). The verifier can then enforce the ARG_PTR_TO_SOCKET argument. The bpf_sk_storage_get() also allows to "create" new elem if one does not exist in the sk. It is done by the new BPF_SK_STORAGE_GET_F_CREATE flag. An optional value can also be provided as the initial value during BPF_SK_STORAGE_GET_F_CREATE. The BPF_MAP_TYPE_SK_STORAGE also supports bpf_spin_lock. Together, it has eliminated the potential use cases for an equivalent bpf_map_update_elem() API (for bpf_prog) in this patch. Misc notes: ---------- 1. map_get_next_key is not supported. From the userspace syscall perspective, the map has the socket fd as the key while the map can be shared by pinned-file or map-id. Since btf is enforced, the existing "ss" could be enhanced to pretty print the local-storage. Supporting a kernel defined btf with 4 tuples as the return key could be explored later also. 2. The sk->sk_lock cannot be acquired. Atomic operations is used instead. e.g. cmpxchg is done on the sk->sk_bpf_storage ptr. Please refer to the source code comments for the details in synchronization cases and considerations. 3. The mem is charged to the sk->sk_omem_alloc as the sk filter does. Benchmark: --------- Here is the benchmark data collected by turning on the "kernel.bpf_stats_enabled" sysctl. Two bpf progs are tested: One bpf prog with the usual bpf hashmap (max_entries = 8192) with the sk ptr as the key. (verifier is modified to support sk ptr as the key That should have shortened the key lookup time.) Another bpf prog is with the new BPF_MAP_TYPE_SK_STORAGE. Both are storing a "u32 cnt", do a lookup on "egress_skb/cgroup" for each egress skb and then bump the cnt. netperf is used to drive data with 4096 connected UDP sockets. BPF_MAP_TYPE_HASH with a modifier verifier (152ns per bpf run) 27: cgroup_skb name egress_sk_map tag 74f56e832918070b run_time_ns 58280107540 run_cnt 381347633 loaded_at 2019-04-15T13:46:39-0700 uid 0 xlated 344B jited 258B memlock 4096B map_ids 16 btf_id 5 BPF_MAP_TYPE_SK_STORAGE in this patch (66ns per bpf run) 30: cgroup_skb name egress_sk_stora tag d4aa70984cc7bbf6 run_time_ns 25617093319 run_cnt 390989739 loaded_at 2019-04-15T13:47:54-0700 uid 0 xlated 168B jited 156B memlock 4096B map_ids 17 btf_id 6 Here is a high-level picture on how are the objects organized: sk ┌──────┐ │ │ │ │ │ │ │*sk_bpf_storage─────▶ bpf_sk_storage └──────┘ ┌───────┐ ┌───────────┤ list │ │ │ │ │ │ │ │ │ │ │ └───────┘ │ │ elem │ ┌────────┐ ├─▶│ snode │ │ ├────────┤ │ │ data │ bpf_map │ ├────────┤ ┌─────────┐ │ │map_node│◀─┬─────┤ list │ │ └────────┘ │ │ │ │ │ │ │ │ elem │ │ │ │ ┌────────┐ │ └─────────┘ └─▶│ snode │ │ ├────────┤ │ bpf_map │ data │ │ ┌─────────┐ ├────────┤ │ │ list ├───────▶│map_node│ │ │ │ └────────┘ │ │ │ │ │ │ elem │ └─────────┘ ┌────────┐ │ ┌─▶│ snode │ │ │ ├────────┤ │ │ │ data │ │ │ ├────────┤ │ │ │map_node│◀─┘ │ └────────┘ │ │ │ ┌───────┐ sk └──────────│ list │ ┌──────┐ │ │ │ │ │ │ │ │ │ │ │ │ └───────┘ │*sk_bpf_storage───────▶bpf_sk_storage └──────┘ Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-26selftests: bpf: test writable buffers in raw tpsMatt Mullins1-0/+4
This tests that: * a BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE cannot be attached if it uses either: * a variable offset to the tracepoint buffer, or * an offset beyond the size of the tracepoint buffer * a tracer can modify the buffer provided when attached to a writable tracepoint in bpf_prog_test_run Signed-off-by: Matt Mullins <mmullins@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-23bpf/flow_dissector: don't adjust nhoff by ETH_HLEN in BPF_PROG_TEST_RUNStanislav Fomichev1-3/+0
Now that we use skb-less flow dissector let's return true nhoff and thoff. We used to adjust them by ETH_HLEN because that's how it was done in the skb case. For VLAN tests that looks confusing: nhoff is pointing to vlan parts :-\ Warning, this is an API change for BPF_PROG_TEST_RUN! Feel free to drop if you think that it's too late at this point to fix it. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-23bpf: when doing BPF_PROG_TEST_RUN for flow dissector use no-skb modeStanislav Fomichev1-30/+17
Now that we have bpf_flow_dissect which can work on raw data, use it when doing BPF_PROG_TEST_RUN for flow dissector. Simplifies bpf_prog_test_run_flow_dissector and allows us to test no-skb mode. Note, that previously, with bpf_flow_dissect_skb we used to call eth_type_trans which pulled L2 (ETH_HLEN) header and we explicitly called skb_reset_network_header. That means flow_keys->nhoff would be initialized to 0 (skb_network_offset) in init_flow_keys. Now we call bpf_flow_dissect with nhoff set to ETH_HLEN and need to undo it once the dissection is done to preserve the existing behavior. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-23flow_dissector: switch kernel context to struct bpf_flow_dissectorStanislav Fomichev1-4/+0
struct bpf_flow_dissector has a small subset of sk_buff fields that flow dissector BPF program is allowed to access and an optional pointer to real skb. Real skb is used only in bpf_skb_load_bytes helper to read non-linear data. The real motivation for this is to be able to call flow dissector from eth_get_headlen context where we don't have an skb and need to dissect raw bytes. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-12bpf: explicitly prohibit ctx_{in, out} in non-skb BPF_PROG_TEST_RUNStanislav Fomichev1-0/+6
This should allow us later to extend BPF_PROG_TEST_RUN for non-skb case and be sure that nobody is erroneously setting ctx_{in,out}. Fixes: b0b9395d865e ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11bpf: fix missing bpf_check_uarg_tail_zero in BPF_PROG_TEST_RUNStanislav Fomichev1-1/+1
Commit b0b9395d865e ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN") started using bpf_check_uarg_tail_zero in BPF_PROG_TEST_RUN. However, bpf_check_uarg_tail_zero is not defined for !CONFIG_BPF_SYSCALL: net/bpf/test_run.c: In function ‘bpf_ctx_init’: net/bpf/test_run.c:142:9: error: implicit declaration of function ‘bpf_check_uarg_tail_zero’ [-Werror=implicit-function-declaration] err = bpf_check_uarg_tail_zero(data_in, max_size, size); ^~~~~~~~~~~~~~~~~~~~~~~~ Let's not build net/bpf/test_run.c when CONFIG_BPF_SYSCALL is not set. Reported-by: kbuild test robot <lkp@intel.com> Fixes: b0b9395d865e ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11bpf: support input __sk_buff context in BPF_PROG_TEST_RUNStanislav Fomichev1-8/+135
Add new set of arguments to bpf_attr for BPF_PROG_TEST_RUN: * ctx_in/ctx_size_in - input context * ctx_out/ctx_size_out - output context The intended use case is to pass some meta data to the test runs that operate on skb (this has being brought up on recent LPC). For programs that use bpf_prog_test_run_skb, support __sk_buff input and output. Initially, from input __sk_buff, copy _only_ cb and priority into skb, all other non-zero fields are prohibited (with EINVAL). If the user has set ctx_out/ctx_size_out, copy the potentially modified __sk_buff back to the userspace. We require all fields of input __sk_buff except the ones we explicitly support to be set to zero. The expectation is that in the future we might add support for more fields and we want to fail explicitly if the user runs the program on the kernel where we don't yet support them. The API is intentionally vague (i.e. we don't explicitly add __sk_buff to bpf_attr, but ctx_in) to potentially let other test_run types use this interface in the future (this can be xdp_md for xdp types for example). v4: * don't copy more than allowed in bpf_ctx_init [Martin] v3: * handle case where ctx_in is NULL, but ctx_out is not [Martin] * convert size==0 checks to ptr==NULL checks and add some extra ptr checks [Martin] v2: * Addressed comments from Martin Lau Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-08bpf: fix warning about using plain integer as NULLBo YU1-1/+1
Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=net/bpf/ CHECK net/bpf//test_run.c net/bpf//test_run.c:19:77: warning: Using plain integer as NULL pointer ./include/linux/bpf-cgroup.h:295:77: warning: Using plain integer as NULL pointer Fixes: 8bad74f9840f ("bpf: extend cgroup bpf core to allow multiple cgroup storage types") Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Bo YU <tsu.yubo@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-6/+20
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-03-04 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add AF_XDP support to libbpf. Rationale is to facilitate writing AF_XDP applications by offering higher-level APIs that hide many of the details of the AF_XDP uapi. Sample programs are converted over to this new interface as well, from Magnus. 2) Introduce a new cant_sleep() macro for annotation of functions that cannot sleep and use it in BPF_PROG_RUN() to assert that BPF programs run under preemption disabled context, from Peter. 3) Introduce per BPF prog stats in order to monitor the usage of BPF; this is controlled by kernel.bpf_stats_enabled sysctl knob where monitoring tools can make use of this to efficiently determine the average cost of programs, from Alexei. 4) Split up BPF selftest's test_progs similarly as we already did with test_verifier. This allows to further reduce merge conflicts in future and to get more structure into our quickly growing BPF selftest suite, from Stanislav. 5) Fix a bug in BTF's dedup algorithm which can cause an infinite loop in some circumstances; also various BPF doc fixes and improvements, from Andrii. 6) Various BPF sample cleanups and migration to libbpf in order to further isolate the old sample loader code (so we can get rid of it at some point), from Jakub. 7) Add a new BPF helper for BPF cgroup skb progs that allows to set ECN CE code point and a Host Bandwidth Manager (HBM) sample program for limiting the bandwidth used by v2 cgroups, from Lawrence. 8) Enable write access to skb->queue_mapping from tc BPF egress programs in order to let BPF pick TX queue, from Jesper. 9) Fix a bug in BPF spinlock handling for map-in-map which did not propagate spin_lock_off to the meta map, from Yonghong. 10) Fix a bug in the new per-CPU BPF prog counters to properly initialize stats for each CPU, from Eric. 11) Add various BPF helper prototypes to selftest's bpf_helpers.h, from Willem. 12) Fix various BPF samples bugs in XDP and tracing progs, from Toke, Daniel and Yonghong. 13) Silence preemption splat in test_bpf after BPF_PROG_RUN() enforces it now everywhere, from Anders. 14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to get error handling working, from Dan. 15) Fix bpftool documentation and auto-completion with regards to stream_{verdict,parser} attach types, from Alban. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25bpf/test_run: fix unkillable BPF_PROG_TEST_RUN for flow dissectorStanislav Fomichev1-6/+20
Syzbot found out that running BPF_PROG_TEST_RUN with repeat=0xffffffff makes process unkillable. The problem is that when CONFIG_PREEMPT is enabled, we never see need_resched() return true. This is due to the fact that preempt_enable() (which we do in bpf_test_run_one on each iteration) now handles resched if it's needed. Let's disable preemption for the whole run, not per test. In this case we can properly see whether resched is needed. Let's also properly return -EINTR to the userspace in case of a signal interrupt. This is a follow up for a recently fixed issue in bpf_test_run, see commit df1a2cb7c74b ("bpf/test_run: fix unkillable BPF_PROG_TEST_RUN"). Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-21/+24
Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-19bpf/test_run: fix unkillable BPF_PROG_TEST_RUNStanislav Fomichev1-21/+24
Syzbot found out that running BPF_PROG_TEST_RUN with repeat=0xffffffff makes process unkillable. The problem is that when CONFIG_PREEMPT is enabled, we never see need_resched() return true. This is due to the fact that preempt_enable() (which we do in bpf_test_run_one on each iteration) now handles resched if it's needed. Let's disable preemption for the whole run, not per test. In this case we can properly see whether resched is needed. Let's also properly return -EINTR to the userspace in case of a signal interrupt. See recent discussion: http://lore.kernel.org/netdev/CAH3MdRWHr4N8jei8jxDppXjmw-Nw=puNDLbu1dQOFQHxfU2onA@mail.gmail.com I'll follow up with the same fix bpf_prog_test_run_flow_dissector in bpf-next. Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-29bpf: add BPF_PROG_TEST_RUN support for flow dissectorStanislav Fomichev1-0/+82
The input is packet data, the output is struct bpf_flow_key. This should make it easy to test flow dissector programs without elaborate setup. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-2/+13
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-12-11 The following pull-request contains BPF updates for your *net-next* tree. It has three minor merge conflicts, resolutions: 1) tools/testing/selftests/bpf/test_verifier.c Take first chunk with alignment_prevented_execution. 2) net/core/filter.c [...] case bpf_ctx_range_ptr(struct __sk_buff, flow_keys): case bpf_ctx_range(struct __sk_buff, wire_len): return false; [...] 3) include/uapi/linux/bpf.h Take the second chunk for the two cases each. The main changes are: 1) Add support for BPF line info via BTF and extend libbpf as well as bpftool's program dump to annotate output with BPF C code to facilitate debugging and introspection, from Martin. 2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter and all JIT backends, from Jiong. 3) Improve BPF test coverage on archs with no efficient unaligned access by adding an "any alignment" flag to the BPF program load to forcefully disable verifier alignment checks, from David. 4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz. 5) Extend tc BPF programs to use a new __sk_buff field called wire_len for more accurate accounting of packets going to wire, from Petar. 6) Improve bpftool to allow dumping the trace pipe from it and add several improvements in bash completion and map/prog dump, from Quentin. 7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for kernel addresses and add a dedicated BPF JIT backend allocator, from Ard. 8) Add a BPF helper function for IR remotes to report mouse movements, from Sean. 9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info member naming consistent with existing conventions, from Yonghong and Song. 10) Misc cleanups and improvements in allowing to pass interface name via cmdline for xdp1 BPF example, from Matteo. 11) Fix a potential segfault in BPF sample loader's kprobes handling, from Daniel T. 12) Fix SPDX license in libbpf's README.rst, from Andrey. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04bpf: respect size hint to BPF_PROG_TEST_RUN if presentLorenz Bauer1-2/+13
Use data_size_out as a size hint when copying test output to user space. ENOSPC is returned if the output buffer is too small. Callers which so far did not set data_size_out are not affected. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-01bpf: refactor bpf_test_run() to separate own failures and test program resultRoman Gushchin1-6/+15
After commit f42ee093be29 ("bpf/test_run: support cgroup local storage") the bpf_test_run() function may fail with -ENOMEM, if it's not possible to allocate memory for a cgroup local storage. This error shouldn't be mixed with the return value of the testing program. Let's add an additional argument with a pointer where to store the testing program's result; and make bpf_test_run() return either 0 or -ENOMEM. Fixes: f42ee093be29 ("bpf/test_run: support cgroup local storage") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19bpf: add tests for direct packet access from CGROUP_SKBSong Liu1-0/+15
Tests are added to make sure CGROUP_SKB cannot access: tc_classid, data_meta, flow_keys and can read and write: mark, prority, and cb[0-4] and can read other fields. To make selftest with skb->sk work, a dummy sk is added in bpf_prog_test_run_skb(). Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-01bpf: extend cgroup bpf core to allow multiple cgroup storage typesRoman Gushchin1-6/+14
In order to introduce per-cpu cgroup storage, let's generalize bpf cgroup core to support multiple cgroup storage types. Potentially, per-node cgroup storage can be added later. This commit is mostly a formal change that replaces cgroup_storage pointer with a array of cgroup_storage pointers. It doesn't actually introduce a new storage type, it will be done later. Each bpf program is now able to have one cgroup storage of each type. Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03bpf/test_run: support cgroup local storageRoman Gushchin1-2/+11
Allocate a temporary cgroup storage to use for bpf program test runs. Because the test program is not actually attached to a cgroup, the storage is allocated manually just for the execution of the bpf program. If the program is executed multiple times, the storage is not zeroed on each run, emulating multiple runs of the program, attached to a real cgroup. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-11bpf: fix panic due to oob in bpf_prog_test_run_skbDaniel Borkmann1-3/+14
sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-18bpf: making bpf_prog_test run aware of possible data_end ptr changeNikita V. Shirokov1-1/+2
after introduction of bpf_xdp_adjust_tail helper packet length could be changed not only if xdp->data pointer has been changed but xdp->data_end as well. making bpf_prog_test_run aware of this possibility Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-01bpf: fix null pointer deref in bpf_prog_test_run_xdpDaniel Borkmann1-0/+4
syzkaller was able to generate the following XDP program ... (18) r0 = 0x0 (61) r5 = *(u32 *)(r1 +12) (04) (u32) r0 += (u32) 0 (95) exit ... and trigger a NULL pointer dereference in ___bpf_prog_run() via bpf_prog_test_run_xdp() where this was attempted to run. Reason is that recent xdp_rxq_info addition to XDP programs updated all drivers, but not bpf_prog_test_run_xdp(), where xdp_buff is set up. Thus when context rewriter does the deref on the netdev it's NULL at runtime. Fix it by using xdp_rxq from loopback dev. __netif_get_rx_queue() helper can also be reused in various other locations later on. Fixes: 02dd3291b2f0 ("bpf: finally expose xdp_rxq_info to XDP bpf-programs") Reported-by: syzbot+1eb094057b338eb1fc00@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2017-09-26bpf: add meta pointer for direct accessDaniel Borkmann1-0/+1
This work enables generic transfer of metadata from XDP into skb. The basic idea is that we can make use of the fact that the resulting skb must be linear and already comes with a larger headroom for supporting bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work on a similar principle and introduce a small helper bpf_xdp_adjust_meta() for adjusting a new pointer called xdp->data_meta. Thus, the packet has a flexible and programmable room for meta data, followed by the actual packet data. struct xdp_buff is therefore laid out that we first point to data_hard_start, then data_meta directly prepended to data followed by data_end marking the end of packet. bpf_xdp_adjust_head() takes into account whether we have meta data already prepended and if so, memmove()s this along with the given offset provided there's enough room. xdp->data_meta is optional and programs are not required to use it. The rationale is that when we process the packet in XDP (e.g. as DoS filter), we can push further meta data along with it for the XDP_PASS case, and give the guarantee that a clsact ingress BPF program on the same device can pick this up for further post-processing. Since we work with skb there, we can also set skb->mark, skb->priority or other skb meta data out of BPF, thus having this scratch space generic and programmable allows for more flexibility than defining a direct 1:1 transfer of potentially new XDP members into skb (it's also more efficient as we don't need to initialize/handle each of such new members). The facility also works together with GRO aggregation. The scratch space at the head of the packet can be multiple of 4 byte up to 32 byte large. Drivers not yet supporting xdp->data_meta can simply be set up with xdp->data_meta as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out, such that the subsequent match against xdp->data for later access is guaranteed to fail. The verifier treats xdp->data_meta/xdp->data the same way as we treat xdp->data/xdp->data_end pointer comparisons. The requirement for doing the compare against xdp->data is that it hasn't been modified from it's original address we got from ctx access. It may have a range marking already from prior successful xdp->data/xdp->data_end pointer comparisons though. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26bpf: rename bpf_compute_data_end into bpf_compute_data_pointersDaniel Borkmann1-1/+1
Just do the rename into bpf_compute_data_pointers() as we'll add one more pointer here to recompute. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-02bpf: Align packet data properly in program testing framework.David Miller1-5/+5
Make sure we apply NET_IP_ALIGN when reserving headroom for SKB and XDP test runs, just like a real driver would. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net>