diff options
Diffstat (limited to 'drivers/gpu/drm/sun4i/sun4i_tcon.c')
| -rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.c | 21 |
1 files changed, 2 insertions, 19 deletions
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 1e643bc7e786..9f06dec0fc61 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -569,30 +569,13 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (info->bus_flags & DRM_BUS_FLAG_DE_LOW) val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE; - /* - * On A20 and similar SoCs, the only way to achieve Positive Edge - * (Rising Edge), is setting dclk clock phase to 2/3(240°). - * By default TCON works in Negative Edge(Falling Edge), - * this is why phase is set to 0 in that case. - * Unfortunately there's no way to logically invert dclk through - * IO_POL register. - * The only acceptable way to work, triple checked with scope, - * is using clock phase set to 0° for Negative Edge and set to 240° - * for Positive Edge. - * On A33 and similar SoCs there would be a 90° phase option, - * but it divides also dclk by 2. - * Following code is a way to avoid quirks all around TCON - * and DOTCLOCK drivers. - */ - if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE) - clk_set_phase(tcon->dclk, 240); - if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE) - clk_set_phase(tcon->dclk, 0); + val |= SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE; regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE | + SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE | SUN4I_TCON0_IO_POL_DE_NEGATIVE, val); |