diff options
Diffstat (limited to 'linux-core/via_dmablit.c')
| -rw-r--r-- | linux-core/via_dmablit.c | 817 |
1 files changed, 0 insertions, 817 deletions
diff --git a/linux-core/via_dmablit.c b/linux-core/via_dmablit.c deleted file mode 100644 index 59e1e116..00000000 --- a/linux-core/via_dmablit.c +++ /dev/null @@ -1,817 +0,0 @@ -/* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro - * - * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sub license, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE - * USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Authors: - * Thomas Hellstrom. - * Partially based on code obtained from Digeo Inc. - */ - - -/* - * Unmaps the DMA mappings. - * FIXME: Is this a NoOp on x86? Also - * FIXME: What happens if this one is called and a pending blit has previously done - * the same DMA mappings? - */ - -#include "drmP.h" -#include "via_drm.h" -#include "via_drv.h" -#include "via_dmablit.h" - -#include <linux/pagemap.h> - -#define VIA_PGDN(x) (((unsigned long)(x)) & PAGE_MASK) -#define VIA_PGOFF(x) (((unsigned long)(x)) & ~PAGE_MASK) -#define VIA_PFN(x) ((unsigned long)(x) >> PAGE_SHIFT) - -typedef struct _drm_via_descriptor { - uint32_t mem_addr; - uint32_t dev_addr; - uint32_t size; - uint32_t next; -} drm_via_descriptor_t; - - -/* - * Unmap a DMA mapping. - */ - - - -static void -via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg) -{ - int num_desc = vsg->num_desc; - unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page; - unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page; - drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] + - descriptor_this_page; - dma_addr_t next = vsg->chain_start; - - while(num_desc--) { - if (descriptor_this_page-- == 0) { - cur_descriptor_page--; - descriptor_this_page = vsg->descriptors_per_page - 1; - desc_ptr = vsg->desc_pages[cur_descriptor_page] + - descriptor_this_page; - } - dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE); - dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction); - next = (dma_addr_t) desc_ptr->next; - desc_ptr--; - } -} - -/* - * If mode = 0, count how many descriptors are needed. - * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors. - * Descriptors are run in reverse order by the hardware because we are not allowed to update the - * 'next' field without syncing calls when the descriptor is already mapped. - */ - -static void -via_map_blit_for_device(struct pci_dev *pdev, - const drm_via_dmablit_t *xfer, - drm_via_sg_info_t *vsg, - int mode) -{ - unsigned cur_descriptor_page = 0; - unsigned num_descriptors_this_page = 0; - unsigned char *mem_addr = xfer->mem_addr; - unsigned char *cur_mem; - unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr); - uint32_t fb_addr = xfer->fb_addr; - uint32_t cur_fb; - unsigned long line_len; - unsigned remaining_len; - int num_desc = 0; - int cur_line; - dma_addr_t next = 0 | VIA_DMA_DPR_EC; - drm_via_descriptor_t *desc_ptr = NULL; - - if (mode == 1) - desc_ptr = vsg->desc_pages[cur_descriptor_page]; - - for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) { - - line_len = xfer->line_length; - cur_fb = fb_addr; - cur_mem = mem_addr; - - while (line_len > 0) { - - remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len); - line_len -= remaining_len; - - if (mode == 1) { - desc_ptr->mem_addr = dma_map_page(&pdev->dev, - vsg->pages[VIA_PFN(cur_mem) - - VIA_PFN(first_addr)], - VIA_PGOFF(cur_mem), remaining_len, - vsg->direction); - desc_ptr->dev_addr = cur_fb; - - desc_ptr->size = remaining_len; - desc_ptr->next = (uint32_t) next; - next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr), - DMA_TO_DEVICE); - desc_ptr++; - if (++num_descriptors_this_page >= vsg->descriptors_per_page) { - num_descriptors_this_page = 0; - desc_ptr = vsg->desc_pages[++cur_descriptor_page]; - } - } - - num_desc++; - cur_mem += remaining_len; - cur_fb += remaining_len; - } - - mem_addr += xfer->mem_stride; - fb_addr += xfer->fb_stride; - } - - if (mode == 1) { - vsg->chain_start = next; - vsg->state = dr_via_device_mapped; - } - vsg->num_desc = num_desc; -} - -/* - * Function that frees up all resources for a blit. It is usable even if the - * blit info has only been partially built as long as the status enum is consistent - * with the actual status of the used resources. - */ - - -static void -via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg) -{ - struct page *page; - int i; - - switch(vsg->state) { - case dr_via_device_mapped: - via_unmap_blit_from_device(pdev, vsg); - case dr_via_desc_pages_alloc: - for (i=0; i<vsg->num_desc_pages; ++i) { - if (vsg->desc_pages[i] != NULL) - free_page((unsigned long)vsg->desc_pages[i]); - } - kfree(vsg->desc_pages); - case dr_via_pages_locked: - for (i=0; i<vsg->num_pages; ++i) { - if ( NULL != (page = vsg->pages[i])) { - if (! PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction)) - SetPageDirty(page); - page_cache_release(page); - } - } - case dr_via_pages_alloc: - vfree(vsg->pages); - default: - vsg->state = dr_via_sg_init; - } - if (vsg->bounce_buffer) { - vfree(vsg->bounce_buffer); - vsg->bounce_buffer = NULL; - } - vsg->free_on_sequence = 0; -} - -/* - * Fire a blit engine. - */ - -static void -via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - VIA_WRITE(VIA_PCI_DMA_MAR0 + engine*0x10, 0); - VIA_WRITE(VIA_PCI_DMA_DAR0 + engine*0x10, 0); - VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD | - VIA_DMA_CSR_DE); - VIA_WRITE(VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE); - VIA_WRITE(VIA_PCI_DMA_BCR0 + engine*0x10, 0); - VIA_WRITE(VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start); - DRM_WRITEMEMORYBARRIER(); - VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS); - VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04); -} - -/* - * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will - * occur here if the calling user does not have access to the submitted address. - */ - -static int -via_lock_all_dma_pages(drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) -{ - int ret; - unsigned long first_pfn = VIA_PFN(xfer->mem_addr); - vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride -1)) - - first_pfn + 1; - - if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages))) - return -ENOMEM; - memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages); - down_read(¤t->mm->mmap_sem); - ret = get_user_pages(current, current->mm, - (unsigned long)xfer->mem_addr, - vsg->num_pages, - (vsg->direction == DMA_FROM_DEVICE), - 0, vsg->pages, NULL); - - up_read(¤t->mm->mmap_sem); - if (ret != vsg->num_pages) { - if (ret < 0) - return ret; - vsg->state = dr_via_pages_locked; - return -EINVAL; - } - vsg->state = dr_via_pages_locked; - DRM_DEBUG("DMA pages locked\n"); - return 0; -} - -/* - * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the - * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be - * quite large for some blits, and pages don't need to be contingous. - */ - -static int -via_alloc_desc_pages(drm_via_sg_info_t *vsg) -{ - int i; - - vsg->descriptors_per_page = PAGE_SIZE / sizeof( drm_via_descriptor_t); - vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) / - vsg->descriptors_per_page; - - if (NULL == (vsg->desc_pages = kmalloc(sizeof(void *) * vsg->num_desc_pages, GFP_KERNEL))) - return -ENOMEM; - - memset(vsg->desc_pages, 0, sizeof(void *) * vsg->num_desc_pages); - vsg->state = dr_via_desc_pages_alloc; - for (i=0; i<vsg->num_desc_pages; ++i) { - if (NULL == (vsg->desc_pages[i] = - (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL))) - return -ENOMEM; - } - DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages, - vsg->num_desc); - return 0; -} - -static void -via_abort_dmablit(struct drm_device *dev, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA); -} - -static void -via_dmablit_engine_off(struct drm_device *dev, int engine) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - - VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD); -} - - - -/* - * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here. - * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue - * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while - * the workqueue task takes care of processing associated with the old blit. - */ - -void -via_dmablit_handler(struct drm_device *dev, int engine, int from_irq) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; - int cur; - int done_transfer; - unsigned long irqsave=0; - uint32_t status = 0; - - DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n", - engine, from_irq, (unsigned long) blitq); - - if (from_irq) { - spin_lock(&blitq->blit_lock); - } else { - spin_lock_irqsave(&blitq->blit_lock, irqsave); - } - - done_transfer = blitq->is_active && - (( status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD); - done_transfer = done_transfer || ( blitq->aborting && !(status & VIA_DMA_CSR_DE)); - - cur = blitq->cur; - if (done_transfer) { - - blitq->blits[cur]->aborted = blitq->aborting; - blitq->done_blit_handle++; - DRM_WAKEUP(blitq->blit_queue + cur); - - cur++; - if (cur >= VIA_NUM_BLIT_SLOTS) - cur = 0; - blitq->cur = cur; - - /* - * Clear transfer done flag. - */ - - VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD); - - blitq->is_active = 0; - blitq->aborting = 0; - schedule_work(&blitq->wq); - - } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) { - - /* - * Abort transfer after one second. - */ - - via_abort_dmablit(dev, engine); - blitq->aborting = 1; - blitq->end = jiffies + DRM_HZ; - } - - if (!blitq->is_active) { - if (blitq->num_outstanding) { - via_fire_dmablit(dev, blitq->blits[cur], engine); - blitq->is_active = 1; - blitq->cur = cur; - blitq->num_outstanding--; - blitq->end = jiffies + DRM_HZ; - if (!timer_pending(&blitq->poll_timer)) { - blitq->poll_timer.expires = jiffies+1; - add_timer(&blitq->poll_timer); - } - } else { - if (timer_pending(&blitq->poll_timer)) { - del_timer(&blitq->poll_timer); - } - via_dmablit_engine_off(dev, engine); - } - } - - if (from_irq) { - spin_unlock(&blitq->blit_lock); - } else { - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - } -} - - - -/* - * Check whether this blit is still active, performing necessary locking. - */ - -static int -via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue) -{ - unsigned long irqsave; - uint32_t slot; - int active; - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - /* - * Allow for handle wraparounds. - */ - - active = ((blitq->done_blit_handle - handle) > (1 << 23)) && - ((blitq->cur_blit_handle - handle) <= (1 << 23)); - - if (queue && active) { - slot = handle - blitq->done_blit_handle + blitq->cur -1; - if (slot >= VIA_NUM_BLIT_SLOTS) { - slot -= VIA_NUM_BLIT_SLOTS; - } - *queue = blitq->blit_queue + slot; - } - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - return active; -} - -/* - * Sync. Wait for at least three seconds for the blit to be performed. - */ - -static int -via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine) -{ - - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_blitq_t *blitq = dev_priv->blit_queues + engine; - wait_queue_head_t *queue; - int ret = 0; - - if (via_dmablit_active(blitq, engine, handle, &queue)) { - DRM_WAIT_ON(ret, *queue, 3 * DRM_HZ, - !via_dmablit_active(blitq, engine, handle, NULL)); - } - DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n", - handle, engine, ret); - - return ret; -} - - -/* - * A timer that regularly polls the blit engine in cases where we don't have interrupts: - * a) Broken hardware (typically those that don't have any video capture facility). - * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted. - * The timer and hardware IRQ's can and do work in parallel. If the hardware has - * irqs, it will shorten the latency somewhat. - */ - - - -static void -via_dmablit_timer(unsigned long data) -{ - drm_via_blitq_t *blitq = (drm_via_blitq_t *) data; - struct drm_device *dev = blitq->dev; - int engine = (int) - (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues); - - DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine, - (unsigned long) jiffies); - - via_dmablit_handler(dev, engine, 0); - - if (!timer_pending(&blitq->poll_timer)) { - blitq->poll_timer.expires = jiffies+1; - add_timer(&blitq->poll_timer); - - /* - * Rerun handler to delete timer if engines are off, and - * to shorten abort latency. This is a little nasty. - */ - - via_dmablit_handler(dev, engine, 0); - } -} - - - - -/* - * Workqueue task that frees data and mappings associated with a blit. - * Also wakes up waiting processes. Each of these tasks handles one - * blit engine only and may not be called on each interrupt. - */ - - -static void -via_dmablit_workqueue(struct work_struct *work) -{ - drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq); - struct drm_device *dev = blitq->dev; - unsigned long irqsave; - drm_via_sg_info_t *cur_sg; - int cur_released; - - - DRM_DEBUG("Workqueue task called for blit engine %ld\n",(unsigned long) - (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues)); - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - while(blitq->serviced != blitq->cur) { - - cur_released = blitq->serviced++; - - DRM_DEBUG("Releasing blit slot %d\n", cur_released); - - if (blitq->serviced >= VIA_NUM_BLIT_SLOTS) - blitq->serviced = 0; - - cur_sg = blitq->blits[cur_released]; - blitq->num_free++; - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - DRM_WAKEUP(&blitq->busy_queue); - - via_free_sg_info(dev->pdev, cur_sg); - kfree(cur_sg); - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - } - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); -} - - -/* - * Init all blit engines. Currently we use two, but some hardware have 4. - */ - - -void -via_init_dmablit(struct drm_device *dev) -{ - int i,j; - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_blitq_t *blitq; - - pci_set_master(dev->pdev); - - for (i=0; i< VIA_NUM_BLIT_ENGINES; ++i) { - blitq = dev_priv->blit_queues + i; - blitq->dev = dev; - blitq->cur_blit_handle = 0; - blitq->done_blit_handle = 0; - blitq->head = 0; - blitq->cur = 0; - blitq->serviced = 0; - blitq->num_free = VIA_NUM_BLIT_SLOTS - 1; - blitq->num_outstanding = 0; - blitq->is_active = 0; - blitq->aborting = 0; - spin_lock_init(&blitq->blit_lock); - for (j=0; j<VIA_NUM_BLIT_SLOTS; ++j) { - DRM_INIT_WAITQUEUE(blitq->blit_queue + j); - } - DRM_INIT_WAITQUEUE(&blitq->busy_queue); - INIT_WORK(&blitq->wq, via_dmablit_workqueue); - init_timer(&blitq->poll_timer); - blitq->poll_timer.function = &via_dmablit_timer; - blitq->poll_timer.data = (unsigned long) blitq; - } -} - -/* - * Build all info and do all mappings required for a blit. - */ - - -static int -via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer) -{ - int draw = xfer->to_fb; - int ret = 0; - - vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; - vsg->bounce_buffer = NULL; - - vsg->state = dr_via_sg_init; - - if (xfer->num_lines <= 0 || xfer->line_length <= 0) { - DRM_ERROR("Zero size bitblt.\n"); - return -EINVAL; - } - - /* - * Below check is a driver limitation, not a hardware one. We - * don't want to lock unused pages, and don't want to incoporate the - * extra logic of avoiding them. Make sure there are no. - * (Not a big limitation anyway.) - */ - - if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) { - DRM_ERROR("Too large system memory stride. Stride: %d, " - "Length: %d\n", xfer->mem_stride, xfer->line_length); - return -EINVAL; - } - - if ((xfer->mem_stride == xfer->line_length) && - (xfer->fb_stride == xfer->line_length)) { - xfer->mem_stride *= xfer->num_lines; - xfer->line_length = xfer->mem_stride; - xfer->fb_stride = xfer->mem_stride; - xfer->num_lines = 1; - } - - /* - * Don't lock an arbitrary large number of pages, since that causes a - * DOS security hole. - */ - - if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) { - DRM_ERROR("Too large PCI DMA bitblt.\n"); - return -EINVAL; - } - - /* - * we allow a negative fb stride to allow flipping of images in - * transfer. - */ - - if (xfer->mem_stride < xfer->line_length || - abs(xfer->fb_stride) < xfer->line_length) { - DRM_ERROR("Invalid frame-buffer / memory stride.\n"); - return -EINVAL; - } - - /* - * A hardware bug seems to be worked around if system memory addresses start on - * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted - * about this. Meanwhile, impose the following restrictions: - */ - -#ifdef VIA_BUGFREE - if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) || - ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) { - DRM_ERROR("Invalid DRM bitblt alignment.\n"); - return -EINVAL; - } -#else - if ((((unsigned long)xfer->mem_addr & 15) || ((unsigned long)xfer->fb_addr & 3)) || - ((xfer->num_lines > 1) && ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) { - DRM_ERROR("Invalid DRM bitblt alignment.\n"); - return -EINVAL; - } -#endif - - if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) { - DRM_ERROR("Could not lock DMA pages.\n"); - via_free_sg_info(dev->pdev, vsg); - return ret; - } - - via_map_blit_for_device(dev->pdev, xfer, vsg, 0); - if (0 != (ret = via_alloc_desc_pages(vsg))) { - DRM_ERROR("Could not allocate DMA descriptor pages.\n"); - via_free_sg_info(dev->pdev, vsg); - return ret; - } - via_map_blit_for_device(dev->pdev, xfer, vsg, 1); - - return 0; -} - - -/* - * Reserve one free slot in the blit queue. Will wait for one second for one - * to become available. Otherwise -EBUSY is returned. - */ - -static int -via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine) -{ - int ret=0; - unsigned long irqsave; - - DRM_DEBUG("Num free is %d\n", blitq->num_free); - spin_lock_irqsave(&blitq->blit_lock, irqsave); - while(blitq->num_free == 0) { - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - DRM_WAIT_ON(ret, blitq->busy_queue, DRM_HZ, blitq->num_free > 0); - if (ret) { - return (-EINTR == ret) ? -EAGAIN : ret; - } - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - } - - blitq->num_free--; - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - - return 0; -} - -/* - * Hand back a free slot if we changed our mind. - */ - -static void -via_dmablit_release_slot(drm_via_blitq_t *blitq) -{ - unsigned long irqsave; - - spin_lock_irqsave(&blitq->blit_lock, irqsave); - blitq->num_free++; - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - DRM_WAKEUP( &blitq->busy_queue ); -} - -/* - * Grab a free slot. Build blit info and queue a blit. - */ - - -static int -via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer) -{ - drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private; - drm_via_sg_info_t *vsg; - drm_via_blitq_t *blitq; - int ret; - int engine; - unsigned long irqsave; - - if (dev_priv == NULL) { - DRM_ERROR("Called without initialization.\n"); - return -EINVAL; - } - - engine = (xfer->to_fb) ? 0 : 1; - blitq = dev_priv->blit_queues + engine; - if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) { - return ret; - } - if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) { - via_dmablit_release_slot(blitq); - return -ENOMEM; - } - if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) { - via_dmablit_release_slot(blitq); - kfree(vsg); - return ret; - } - spin_lock_irqsave(&blitq->blit_lock, irqsave); - - blitq->blits[blitq->head++] = vsg; - if (blitq->head >= VIA_NUM_BLIT_SLOTS) - blitq->head = 0; - blitq->num_outstanding++; - xfer->sync.sync_handle = ++blitq->cur_blit_handle; - - spin_unlock_irqrestore(&blitq->blit_lock, irqsave); - xfer->sync.engine = engine; - - via_dmablit_handler(dev, engine, 0); - - return 0; -} - -/* - * Sync on a previously submitted blit. Note that the X server use signals extensively, and - * that there is a very big probability that this IOCTL will be interrupted by a signal. In that - * case it returns with -EAGAIN for the signal to be delivered. - * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock(). - */ - -int -via_dma_blit_sync( struct drm_device *dev, void *data, struct drm_file *file_priv ) -{ - drm_via_blitsync_t *sync = data; - int err; - - if (sync->engine >= VIA_NUM_BLIT_ENGINES) - return -EINVAL; - - err = via_dmablit_sync(dev, sync->sync_handle, sync->engine); - - if (-EINTR == err) - err = -EAGAIN; - - return err; -} - - -/* - * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal - * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should - * be reissued. See the above IOCTL code. - */ - -int -via_dma_blit( struct drm_device *dev, void *data, struct drm_file *file_priv ) -{ - drm_via_dmablit_t *xfer = data; - int err; - - err = via_dmablit(dev, xfer); - - return err; -} |