diff options
Diffstat (limited to 'lib/Target/MBlaze/MBlazeSchedule3.td')
| -rw-r--r-- | lib/Target/MBlaze/MBlazeSchedule3.td | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/lib/Target/MBlaze/MBlazeSchedule3.td b/lib/Target/MBlaze/MBlazeSchedule3.td new file mode 100644 index 00000000000..29848517b0b --- /dev/null +++ b/lib/Target/MBlaze/MBlazeSchedule3.td @@ -0,0 +1,236 @@ +//===- MBlazeSchedule3.td - MBlaze Scheduling Definitions --*- tablegen -*-===// +// +// The LLVM Compiler Infrastructure +// +// This file is distributed under the University of Illinois Open Source +// License. See LICENSE.TXT for details. +// +//===----------------------------------------------------------------------===// + +//===----------------------------------------------------------------------===// +// MBlaze instruction itineraries for the threee stage pipeline. +//===----------------------------------------------------------------------===// +def MBlazePipe3Itineraries : ProcessorItineraries< + [IF,ID,EX], [], [ + + // ALU instruction with one destination register and either two register + // source operands or one register source operand and one immediate operand. + // The instruction takes one cycle to execute in each of the stages. The + // two source operands are read during the decode stage and the result is + // ready after the execute stage. + InstrItinData< IIC_ALU, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<1,[EX]>], // one cycle in execute stage + [ 2 // result ready after two cycles + , 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // ALU multiply instruction with one destination register and either two + // register source operands or one register source operand and one immediate + // operand. The instruction takes one cycle to execute in each of the + // pipeline stages except the execute stage, which takes three cycles. The + // two source operands are read during the decode stage and the result is + // ready after the execute stage. + InstrItinData< IIC_ALUm, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<3,[EX]>], // three cycles in execute stage + [ 4 // result ready after four cycles + , 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // ALU divide instruction with one destination register two register source + // operands. The instruction takes one cycle to execute in each the pipeline + // stages except the execute stage, which takes 34 cycles. The two + // source operands are read during the decode stage and the result is ready + // after the execute stage. + InstrItinData< IIC_ALUd, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<34,[EX]>], // 34 cycles in execute stage + [ 35 // result ready after 35 cycles + , 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // Shift instruction with one destination register and either two register + // source operands or one register source operand and one immediate operand. + // The instruction takes one cycle to execute in each of the pipeline stages + // except the execute stage, which takes two cycles. The two source operands + // are read during the decode stage and the result is ready after the execute + // stage. + InstrItinData< IIC_SHT, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<2,[EX]>], // two cycles in execute stage + [ 3 // result ready after three cycles + , 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // Branch instruction with one source operand register. The instruction takes + // one cycle to execute in each of the pipeline stages. The source operand is + // read during the decode stage. + InstrItinData< IIC_BR, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<1,[EX]>], // one cycle in execute stage + [ 1 ]>, // first operand read after one cycle + + // Conditional branch instruction with two source operand registers. The + // instruction takes one cycle to execute in each of the pipeline stages. The + // two source operands are read during the decode stage. + InstrItinData< IIC_BRc, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<1,[EX]>], // one cycle in execute stage + [ 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // Branch and link instruction with one destination register and one source + // operand register. The instruction takes one cycle to execute in each of + // the pipeline stages. The source operand is read during the decode stage + // and the destination register is ready after the execute stage. + InstrItinData< IIC_BRl, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<1,[EX]>], // one cycle in execute stage + [ 2 // result ready after two cycles + , 1 ]>, // first operand read after one cycle + + // Cache control instruction with two source operand registers. The + // instruction takes one cycle to execute in each of the pipeline stages + // except the memory access stage, which takes two cycles. The source + // operands are read during the decode stage. + InstrItinData< IIC_WDC, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<2,[EX]>], // two cycles in execute stage + [ 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // Floating point instruction with one destination register and two source + // operand registers. The instruction takes one cycle to execute in each of + // the pipeline stages except the execute stage, which takes six cycles. The + // source operands are read during the decode stage and the results are ready + // after the execute stage. + InstrItinData< IIC_FPU, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<6,[EX]>], // six cycles in execute stage + [ 7 // result ready after seven cycles + , 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // Floating point divide instruction with one destination register and two + // source operand registers. The instruction takes one cycle to execute in + // each of the pipeline stages except the execute stage, which takes 30 + // cycles. The source operands are read during the decode stage and the + // results are ready after the execute stage. + InstrItinData< IIC_FPUd, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<30,[EX]>], // one cycle in execute stage + [ 31 // result ready after 31 cycles + , 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // Convert floating point to integer instruction with one destination + // register and one source operand register. The instruction takes one cycle + // to execute in each of the pipeline stages except the execute stage, + // which takes seven cycles. The source operands are read during the decode + // stage and the results are ready after the execute stage. + InstrItinData< IIC_FPUi, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<7,[EX]>], // seven cycles in execute stage + [ 8 // result ready after eight cycles + , 1 ]>, // first operand read after one cycle + + // Convert integer to floating point instruction with one destination + // register and one source operand register. The instruction takes one cycle + // to execute in each of the pipeline stages except the execute stage, + // which takes six cycles. The source operands are read during the decode + // stage and the results are ready after the execute stage. + InstrItinData< IIC_FPUf, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<6,[EX]>], // six cycles in execute stage + [ 7 // result ready after seven cycles + , 1 ]>, // first operand read after one cycle + + // Floating point square root instruction with one destination register and + // one source operand register. The instruction takes one cycle to execute in + // each of the pipeline stages except the execute stage, which takes 29 + // cycles. The source operands are read during the decode stage and the + // results are ready after the execute stage. + InstrItinData< IIC_FPUs, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<29,[EX]>], // 29 cycles in execute stage + [ 30 // result ready after 30 cycles + , 1 ]>, // first operand read after one cycle + + // Floating point comparison instruction with one destination register and + // two source operand registers. The instruction takes one cycle to execute + // in each of the pipeline stages except the execute stage, which takes three + // cycles. The source operands are read during the decode stage and the + // results are ready after the execute stage. + InstrItinData< IIC_FPUc, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<3,[EX]>], // three cycles in execute stage + [ 4 // result ready after four cycles + , 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // FSL get instruction with one register or immediate source operand and one + // destination register. The instruction takes one cycle to execute in each + // of the pipeline stages except the execute stage, which takes two cycles. + // The one source operand is read during the decode stage and the result is + // ready after the execute stage. + InstrItinData< IIC_FSLg, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<2,[EX]>], // two cycles in execute stage + [ 3 // result ready after two cycles + , 1 ]>, // first operand read after one cycle + + // FSL put instruction with either two register source operands or one + // register source operand and one immediate operand. There is no result + // produced by the instruction. The instruction takes one cycle to execute in + // each of the pipeline stages except the execute stage, which takes two + // cycles. The two source operands are read during the decode stage. + InstrItinData< IIC_FSLp, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<2,[EX]>], // two cycles in execute stage + [ 1 // first operand read after one cycle + , 1 ]>, // second operand read after one cycle + + // Memory store instruction with either three register source operands or two + // register source operands and one immediate operand. There is no result + // produced by the instruction. The instruction takes one cycle to execute in + // each of the pipeline stages except the execute stage, which takes two + // cycles. All of the source operands are read during the decode stage. + InstrItinData< IIC_MEMs, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<2,[EX]>], // two cycles in execute stage + [ 1 // first operand read after one cycle + , 1 // second operand read after one cycle + , 1 ]>, // third operand read after one cycle + + // Memory load instruction with one destination register and either two + // register source operands or one register source operand and one immediate + // operand. The instruction takes one cycle to execute in each of the + // pipeline stages except the execute stage, which takes two cycles. All of + // the source operands are read during the decode stage and the result is + // ready after the execute stage. + InstrItinData< IIC_MEMl, + [ InstrStage<1,[IF]> // one cycle in fetch stage + , InstrStage<1,[ID]> // one cycle in decode stage + , InstrStage<2,[EX]>], // two cycles in execute stage + [ 3 // result ready after four cycles + , 1 // second operand read after one cycle + , 1 ]> // third operand read after one cycle +]>; |