dnl  Copyright 2005 Red Hat, Inc.
dnl 
dnl  Permission to use, copy, modify, distribute, and sell this software and its
dnl  documentation for any purpose is hereby granted without fee, provided that
dnl  the above copyright notice appear in all copies and that both that
dnl  copyright notice and this permission notice appear in supporting
dnl  documentation, and that the name of Red Hat not be used in
dnl  advertising or publicity pertaining to distribution of the software without
dnl  specific, written prior permission.  Red Hat makes no
dnl  representations about the suitability of this software for any purpose.  It
dnl  is provided "as is" without express or implied warranty.
dnl 
dnl  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
dnl  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
dnl  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
dnl  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
dnl  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
dnl  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
dnl  PERFORMANCE OF THIS SOFTWARE.
dnl
dnl Process this file with autoconf to create configure.

AC_PREREQ([2.57])

#   Pixman versioning scheme
#
#   - The version in git has an odd MICRO version number
#
#   - Released versions both development and stable have an even MICRO 
#     version number
#
#   - Released development versions have an odd MINOR number
#
#   - Released stable versions have an even MINOR number
#
#   - Versions that break ABI must have a new MAJOR number
#
#   - If you break the ABI, then at least this must be done:
#
#        - increment MAJOR
#
#        - In the first development release where you break ABI, find
#          all instances of "pixman-n" and change them to pixman-(n+1)
#
#          This needs to be done at least in 
#                    configure.ac
#                    all Makefile.am's
#                    pixman-n.pc.in
#
#      This ensures that binary incompatible versions can be installed
#      in parallel.  See http://www106.pair.com/rhp/parallel.html for
#      more information
#

m4_define([pixman_major], 0)
m4_define([pixman_minor], 17)
m4_define([pixman_micro], 1)

m4_define([pixman_version],[pixman_major.pixman_minor.pixman_micro])

AC_INIT(pixman, pixman_version, "sandmann@daimi.au.dk", pixman)
AM_INIT_AUTOMAKE([foreign dist-bzip2])

# Suppress verbose compile lines
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])

AM_CONFIG_HEADER(config.h)

AC_CANONICAL_HOST

test_CFLAGS=${CFLAGS+set} # We may override autoconf default CFLAGS.

AC_PROG_CC
AM_PROG_AS
AC_PROG_LIBTOOL
AC_CHECK_FUNCS([getisax])
AC_C_BIGENDIAN
AC_C_INLINE

AC_CHECK_SIZEOF(long)

# Checks for Sun Studio compilers
AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
AC_CHECK_DECL([__amd64], [AMD64_ABI="yes"], [AMD64_ABI="no"])

# Default CFLAGS to -O -g rather than just the -g from AC_PROG_CC
# if we're using Sun Studio and neither the user nor a config.site
# has set CFLAGS.
if test $SUNCC = yes &&			\
   test "$test_CFLAGS" == "" &&		\
   test "$CFLAGS" = "-g"
then
  CFLAGS="-O -g"
fi

# 
# We ignore pixman_major in the version here because the major version should
# always be encoded in the actual library name. Ie., the soname is:
#
#      pixman-$(pixman_major).0.minor.micro
#
m4_define([lt_current], [pixman_minor])
m4_define([lt_revision], [pixman_micro])
m4_define([lt_age], [pixman_minor])

LT_VERSION_INFO="lt_current:lt_revision:lt_age"

PIXMAN_VERSION_MAJOR=pixman_major()
AC_SUBST(PIXMAN_VERSION_MAJOR)
PIXMAN_VERSION_MINOR=pixman_minor()
AC_SUBST(PIXMAN_VERSION_MINOR)
PIXMAN_VERSION_MICRO=pixman_micro()
AC_SUBST(PIXMAN_VERSION_MICRO)

AC_SUBST(LT_VERSION_INFO)

# Check for dependencies
#PKG_CHECK_MODULES(DEP, x11)

changequote(,)dnl
if test "x$GCC" = "xyes"; then

  case " $CFLAGS " in
  *[\ \	]-Wall[\ \	]*) ;;
  *) CFLAGS="$CFLAGS -Wall" ;;
  esac 

  case " $CFLAGS " in
  *[\ \	]-fno-strict-aliasing[\ \	]*) ;;
  *) CFLAGS="$CFLAGS -fno-strict-aliasing" ;;
  esac

fi changequote([,])dnl

AC_PATH_PROG(PERL, perl, no)
if test "x$PERL" = xno; then
    AC_MSG_ERROR([Perl is required to build pixman.])
fi
AC_SUBST(PERL)

dnl =========================================================================
dnl -fvisibility stuff

have_gcc4=no
AC_MSG_CHECKING(for -fvisibility)
AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ >= 4)
#else
error Need GCC 4.0 for visibility
#endif
int main () { return 0; } 
], have_gcc4=yes)

if test "x$have_gcc4" = "xyes"; then
   CFLAGS="$CFLAGS -fvisibility=hidden"
fi
AC_MSG_RESULT($have_gcc4)

have_sunstudio8=no
AC_MSG_CHECKING([for -xldscope (Sun compilers)])
AC_COMPILE_IFELSE([
#if defined(__SUNPRO_C) && (__SUNPRO_C >= 0x550)
#else
error Need Sun Studio 8 for visibility
#endif
int main () { return 0; } 
], have_sunstudio8=yes)

if test "x$have_sunstudio8" = "xyes"; then
   CFLAGS="$CFLAGS -xldscope=hidden"
fi
AC_MSG_RESULT($have_sunstudio8)

dnl ===========================================================================
dnl Check for MMX

if test "x$MMX_CFLAGS" = "x" ; then
   if test "x$SUNCC" = "xyes"; then
      # Sun Studio doesn't have an -xarch=mmx flag, so we have to use sse
      # but if we're building 64-bit, mmx & sse support is on by default and
      # -xarch=sse throws an error instead
      if test "$AMD64_ABI" = "no" ; then
         MMX_CFLAGS="-xarch=sse"
      fi
   else
      MMX_CFLAGS="-mmmx -Winline"
   fi
fi

have_mmx_intrinsics=no
AC_MSG_CHECKING(whether to use MMX intrinsics)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="$MMX_CFLAGS $CFLAGS"
AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4))
error "Need GCC >= 3.4 for MMX intrinsics"
#endif
#include <mmintrin.h>
int main () {
    __m64 v = _mm_cvtsi32_si64 (1);
    return _mm_cvtsi64_si32 (v);
}], have_mmx_intrinsics=yes)
CFLAGS=$xserver_save_CFLAGS

AC_ARG_ENABLE(mmx,
   [AC_HELP_STRING([--disable-mmx],
                   [disable MMX fast paths])],
   [enable_mmx=$enableval], [enable_mmx=auto])

if test $enable_mmx = no ; then
   have_mmx_intrinsics=disabled
fi

if test $have_mmx_intrinsics = yes ; then
   AC_DEFINE(USE_MMX, 1, [use MMX compiler intrinsics])
else
   MMX_CFLAGS=
fi

AC_MSG_RESULT($have_mmx_intrinsics)
if test $enable_mmx = yes && test $have_mmx_intrinsics = no ; then
   AC_MSG_ERROR([MMX intrinsics not detected])
fi

AM_CONDITIONAL(USE_MMX, test $have_mmx_intrinsics = yes)

dnl ===========================================================================
dnl Check for SSE2

if test "x$SSE2_CFLAGS" = "x" ; then
   if test "x$SUNCC" = "xyes"; then
      # SSE2 is enabled by default in the Sun Studio 64-bit environment
      if test "$AMD64_ABI" = "no" ; then
         SSE2_CFLAGS="-xarch=sse2"
      fi
   else
      SSE2_CFLAGS="-mmmx -msse2 -Winline"
   fi
fi

have_sse2_intrinsics=no
AC_MSG_CHECKING(whether to use SSE2 intrinsics)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="$SSE2_CFLAGS $CFLAGS"

AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 2))
#   if !defined(__amd64__) && !defined(__x86_64__)
#      error "Need GCC >= 4.2 for SSE2 intrinsics on x86"
#   endif
#endif
#include <mmintrin.h>
#include <xmmintrin.h>
#include <emmintrin.h>
int main () {
    __m128i a, b, c;
	c = _mm_xor_si128 (a, b);
    return 0;
}], have_sse2_intrinsics=yes)
CFLAGS=$xserver_save_CFLAGS

AC_ARG_ENABLE(sse2,
   [AC_HELP_STRING([--disable-sse2],
                   [disable SSE2 fast paths])],
   [enable_sse2=$enableval], [enable_sse2=auto])

if test $enable_sse2 = no ; then
   have_sse2_intrinsics=disabled
fi

if test $have_sse2_intrinsics = yes ; then
   AC_DEFINE(USE_SSE2, 1, [use SSE2 compiler intrinsics])
fi

AC_MSG_RESULT($have_sse2_intrinsics)
if test $enable_sse2 = yes && test $have_sse2_intrinsics = no ; then
   AC_MSG_ERROR([SSE2 intrinsics not detected])
fi

AM_CONDITIONAL(USE_SSE2, test $have_sse2_intrinsics = yes)

dnl ===========================================================================
dnl Other special flags needed when building code using MMX or SSE instructions
case $host_os in
   solaris*)
      # When building 32-bit binaries, apply a mapfile to ensure that the
      # binaries aren't flagged as only able to run on MMX+SSE capable CPUs
      # since they check at runtime before using those instructions.
      # Not all linkers grok the mapfile format so we check for that first.
      if test "$AMD64_ABI" = "no" ; then
	 use_hwcap_mapfile=no
	 AC_MSG_CHECKING(whether to use a hardware capability map file)
	 hwcap_save_LDFLAGS="$LDFLAGS"
	 HWCAP_LDFLAGS='-Wl,-M,$(srcdir)/solaris-hwcap.mapfile'
	 LDFLAGS="$LDFLAGS -Wl,-M,pixman/solaris-hwcap.mapfile"
	 AC_LINK_IFELSE([int main() { return 0; }],
			use_hwcap_mapfile=yes,
			HWCAP_LDFLAGS="")
	 LDFLAGS="$hwcap_save_LDFLAGS"
	 AC_MSG_RESULT($use_hwcap_mapfile)
      fi
      if test "x$MMX_LDFLAGS" = "x" ; then
         MMX_LDFLAGS="$HWCAP_LDFLAGS"
      fi
      if test "x$SSE2_LDFLAGS" = "x" ; then
	 SSE2_LDFLAGS="$HWCAP_LDFLAGS"
      fi
      ;;
esac

AC_SUBST(MMX_CFLAGS)
AC_SUBST(MMX_LDFLAGS)
AC_SUBST(SSE2_CFLAGS)
AC_SUBST(SSE2_LDFLAGS)

dnl ===========================================================================
dnl Check for VMX/Altivec
if test -n "`$CC -v 2>&1 | grep version | grep Apple`"; then
    VMX_CFLAGS="-faltivec"
else
    VMX_CFLAGS="-maltivec -mabi=altivec"
fi

have_vmx_intrinsics=no
AC_MSG_CHECKING(whether to use VMX/Altivec intrinsics)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="$VMX_CFLAGS $CFLAGS"
AC_COMPILE_IFELSE([
#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4))
error "Need GCC >= 3.4 for sane altivec support"
#endif
#include <altivec.h>
int main () {
    vector unsigned int v = vec_splat_u32 (1);
    v = vec_sub (v, v);
    return 0;
}], have_vmx_intrinsics=yes)
CFLAGS=$xserver_save_CFLAGS

AC_ARG_ENABLE(vmx,
   [AC_HELP_STRING([--disable-vmx],
                   [disable VMX fast paths])],
   [enable_vmx=$enableval], [enable_vmx=auto])

if test $enable_vmx = no ; then
   have_vmx_intrinsics=disabled
fi

if test $have_vmx_intrinsics = yes ; then
   AC_DEFINE(USE_VMX, 1, [use VMX compiler intrinsics])
else
   VMX_CFLAGS=
fi

AC_MSG_RESULT($have_vmx_intrinsics)
if test $enable_vmx = yes && test $have_vmx_intrinsics = no ; then
   AC_MSG_ERROR([VMX intrinsics not detected])
fi

AC_SUBST(VMX_CFLAGS)

AM_CONDITIONAL(USE_VMX, test $have_vmx_intrinsics = yes)

dnl ===========================================================================
dnl Check for ARM SIMD instructions
ARM_SIMD_CFLAGS="-mcpu=arm1136j-s"

have_arm_simd=no
AC_MSG_CHECKING(whether to use ARM SIMD assembler)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="$ARM_SIMD_CFLAGS $CFLAGS"
AC_COMPILE_IFELSE([
int main () {
    asm("uqadd8 r1, r1, r2");
    return 0;
}], have_arm_simd=yes)
CFLAGS=$xserver_save_CFLAGS

AC_ARG_ENABLE(arm-simd,
   [AC_HELP_STRING([--disable-arm-simd],
                   [disable ARM SIMD fast paths])],
   [enable_arm_simd=$enableval], [enable_arm_simd=auto])

if test $enable_arm_simd = no ; then
   have_arm_simd=disabled
fi

if test $have_arm_simd = yes ; then
   AC_DEFINE(USE_ARM_SIMD, 1, [use ARM SIMD compiler intrinsics])
else
   ARM_SIMD_CFLAGS=
fi

AC_MSG_RESULT($have_arm_simd)
if test $enable_arm_simd = yes && test $have_arm_simd = no ; then
   AC_MSG_ERROR([ARM SIMD intrinsics not detected])
fi

AC_SUBST(ARM_SIMD_CFLAGS)

AM_CONDITIONAL(USE_ARM_SIMD, test $have_arm_simd = yes)

dnl ==========================================================================
dnl Check if assembler is gas compatible and supports NEON instructions
have_arm_neon=no
AC_MSG_CHECKING(whether to use ARM NEON assembler)
xserver_save_CFLAGS=$CFLAGS
CFLAGS="-x assembler-with-cpp"
AC_COMPILE_IFELSE([[
.text
.fpu neon
.altmacro
#ifndef __ARM_EABI__
#error EABI is required (to be sure that calling conventions are compatible)
#endif
pld [r0]
vmovn.u16 d0, q0]], have_arm_neon=yes)
CFLAGS=$xserver_save_CFLAGS

AC_ARG_ENABLE(arm-neon,
   [AC_HELP_STRING([--disable-arm-neon],
                   [disable ARM NEON fast paths])],
   [enable_arm_neon=$enableval], [enable_arm_neon=auto])

if test $enable_arm_neon = no ; then
   have_arm_neon=disabled
fi

if test $have_arm_neon = yes ; then
   AC_DEFINE(USE_ARM_NEON, 1, [use ARM NEON assembly optimizations])
fi

AM_CONDITIONAL(USE_ARM_NEON, test $have_arm_neon = yes)

AC_MSG_RESULT($have_arm_neon)
if test $enable_arm_neon = yes && test $have_arm_neon = no ; then
   AC_MSG_ERROR([ARM NEON intrinsics not detected])
fi

dnl =========================================================================================
dnl Check for GNU-style inline assembly support

have_gcc_inline_asm=no
AC_MSG_CHECKING(whether to use GNU-style inline assembler)
AC_COMPILE_IFELSE([
int main () {
    /* Most modern architectures have a NOP instruction, so this is a fairly generic test. */
	asm volatile ( "\tnop\n" : : : "cc", "memory" );
    return 0;
}], have_gcc_inline_asm=yes)

AC_ARG_ENABLE(gcc-inline-asm,
   [AC_HELP_STRING([--disable-gcc-inline-asm],
                   [disable GNU-style inline assembler])],
   [enable_gcc_inline_asm=$enableval], [enable_gcc_inline_asm=auto])

if test $enable_gcc_inline_asm = no ; then
   have_gcc_inline_asm=disabled
fi

if test $have_gcc_inline_asm = yes ; then
   AC_DEFINE(USE_GCC_INLINE_ASM, 1, [use GNU-style inline assembler])
fi

AC_MSG_RESULT($have_gcc_inline_asm)
if test $enable_gcc_inline_asm = yes && test $have_gcc_inline_asm = no ; then
   AC_MSG_ERROR([GNU-style inline assembler not detected])
fi

AM_CONDITIONAL(USE_GCC_INLINE_ASM, test $have_gcc_inline_asm = yes)

dnl ==============================================
dnl Timers

AC_ARG_ENABLE(timers,
   [AC_HELP_STRING([--enable-timers],
		   [enable TIMER_BEGIN and TIMER_END macros [default=no]])],
   [enable_timers=$enableval], [enable_timers=no])

if test $enable_timers = yes ; then 
   AC_DEFINE(PIXMAN_TIMERS, 1, [enable TIMER_BEGIN/TIMER_END macros])
fi
AC_SUBST(PIXMAN_TIMERS)

dnl ===================================
dnl GTK+

AC_ARG_ENABLE(gtk,
   [AC_HELP_STRING([--enable-gtk],
                   [enable tests using GTK+ [default=auto]])],
   [enable_gtk=$enableval], [enable_gtk=auto])

PKG_PROG_PKG_CONFIG
if test $enable_gtk = auto ; then
   PKG_CHECK_EXISTS([gtk+-2.0], [enable_gtk=yes], [enable_gtk=no])
fi
if test $enable_gtk = yes ; then
   PKG_CHECK_MODULES(GTK, [gtk+-2.0])
fi

AM_CONDITIONAL(HAVE_GTK, [test "x$enable_gtk" = xyes])

AC_SUBST(GTK_CFLAGS)
AC_SUBST(GTK_LIBS)
AC_SUBST(DEP_CFLAGS)
AC_SUBST(DEP_LIBS)

dnl =====================================
dnl posix_memalign 

AC_CHECK_FUNC(posix_memalign, have_posix_memalign=yes, have_posix_memalign=no)
if test x$have_posix_memalign = xyes; then
   AC_DEFINE(HAVE_POSIX_MEMALIGN, 1, [Whether we have posix_memalign()])
fi

AC_OUTPUT([pixman-1.pc
           pixman-1-uninstalled.pc
           Makefile
	   pixman/Makefile
	   pixman/pixman-version.h
	   test/Makefile])