| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Don't enumerate/monitor all devices of the system (since that can be
quite a few), but limit our search to devices from the "input"
subsystem, as well as the "tty" subsystem (to cover Wacom tablets).
This should make X start up a bit faster and reduce the number of
unnecessary wake-ups of the X server.
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
udev gives no guarantee that before each "changed" event for a device
there's an "add" event, or that before each "remove" is an "add", or
that before each "add" there was no "add" already and so on. Users can
trigger these events at any time with "udevadm trigger", and netlink is
a lossy transport, hence the events can come in unexpected ordering.
With other words: regardless which event is generated, the X server must
not choke on it and make the best of it, hence make sure that if we get
an "add" event for an existing device we don't add the device a second
time.
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
wakeup_handler in udev.c wasn't dealing with udev change events.
There are situations when a device can gain its input capabilities
after it has been added to the system and therefore the change events
must be handled as well.
The change is handled as a consecutive device removal and addition.
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Stefan Kost <Stefan.Kost@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
NewInputDeviceRequest steals the contents of option list elements but
doesn't use the elements themselves for anything. Therefore the list
elements need to be released always.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
RemoveBlockAndWakeupHandlers requires caller to pass same block data
parameter as for RegisterBlockAndWakeupHandlers.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
InputAttributes wants non-const members, and while it appears safe to
cast it, just leave it be for the moment.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
|
|
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
|
|
The 10-evdev.conf file gets installed as /usr/share/X11/10-evdev.conf on
platforms that built the server with --disable-xorg like s390/s390x. The
definition/installation should be guarded with "if XORG" because it makes
sense only when built with xorg.
X.Org Bug 28672 <http://bugs.freedesktop.org/show_bug.cgi?id=28672>
Signed-off-by: Dan Horák <dan@danny.cz>
Acked-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
input-api
Conflicts:
dix/getevents.c
hw/xfree86/common/xf86Xinput.h
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
"You will probably want to add the following option to the ServerFlags of
your xorg.conf:
Option "AllowEmptyInput" "True""
I can't imagine why you would want to do that. My life is painful enough
already.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
Conflicts:
config/udev.c
hw/xfree86/common/xf86Helper.c
hw/xfree86/common/xf86Module.h
hw/xfree86/common/xf86Xinput.h
hw/xfree86/os-support/linux/lnx_init.c
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
config_info is the only reliable indicator we have in the server for
duplicate devices (drivers can test for maj/min on fds as well). Don't set
this after the device has been initialized but assume it's important enough
to set during NIDR.
This makes the option "config_info" available to the drivers as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
The udev device_added function takes the vendor and model IDs of added
devices and converts them into an attribute that can be matched for by
an InputClass configuration using MatchUSBID. Currently, the udev
mechanism works for USB devices, but fails to work properly for
Bluetooth devices. The product IDs of the event node are actually the
IDs of the Bluetooth receiver instead of the device.
This patch reads the product ID from the PRODUCT property of the parent
of the added device. This tag is set correctly for both USB and
Bluetooth input devices. The following devices have been tested by
specifying individual InputClass sections in xorg.conf:
* Apple Keyboard (Bluetooth)
* Apple Magic Trackpad (Bluetooth)
* Apple Magic Mouse (Bluetooth)
* Microsoft Bluetooth Notebook Mouse 5000 (Bluetooth)
* Microsoft IntelliMouse Optical (USB)
* N-Trig Touchscreen (USB)
* Wacom Bamboo Touch (USB)
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
All callers of add_option pass string literal as "key" argument
except one, where non-NULL condition is guarded by if().
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
Replace xstrdup with strdup when either constant string is
being duplicated or argument is guarded by conditionals and
obviously can't be NULL
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
|
|
It's still being pulled in by the HAL CFLAGS but the requirement to define
this was dropped from DBus pre 1.0 (November 2006).
This means we require dbus 1.0 now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
In the new world of udev and InputClass, x11_* settings from HAL fdi
files will not be honored. This script converts those settings into
valid InputClass sections that can be dropped into xorg.conf.d.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Give the user a chance to see why their input devices are being ignored,
even if they have to start the server with -logverbose.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This patch has been generated by the following Coccinelle semantic patch:
@@
expression E;
@@
-if(E) { free(E); }
+free(E);
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Matt Turner <mattst88@gmail.com>
|
|
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301975519af7b20109c17d296312d3f2b.
|
|
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Since the server searches in a vendor specific path now, we can install
the evdev catchall there without disturbing local administration files.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Having a generic catchall also adds devices like accelerometers. These
devices make X unusable, hence restrict matching to "known sane" devices
like pointers, touchpads, keyboards, tablets and touchscreens.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: James Cloos <cloos@jhcloos.com>
|
|
udev needs some xorg.conf file to tell it to load a suitable input
driver, 10-evdev.conf is as simple as they come, mapping all evdev
devices to the evdev driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The input device product name for evdev devices in the kernel uevent has
embedded quotes that aren't expected here. Use the sysfs name attribute
instead, which does not suffer this problem. The uevent name will be
used as a fallback if no name attribute is found.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This allows serial wacom devices to work, whose subsystem is "tty".
Signed-off-by: Thomas Jaeger <ThJaeger@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.
Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).
i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".
Example configuration:
udev:
ENV{ID_INPUT.tags}="foo,bar"
hal:
<merge key="input.tags" type="string">foo,bar</merge>
xorg.conf:
Section "InputClass"
Identifier "foobar quirks"
MatchTag "foo|foobar"
Option "Foobar" "on"
EndSection
Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
|
|
Regression introduced by b1c3dc6ae226db178420e3b5f297b94afc87c94c.
Shutting down the libhal_ctx if the init failed may cause an abort.
This can happen if hald is not yet running at server startup.
X.Org Bug 23213 <http://bugs.freedesktop.org/show_bug.cgi?id=23213>
Tested-by: Stefan Dirsch
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This patch simplifies error handling in the HAL code and fixes a
segfault if libhal_find_device_by_capability() failed.
Fixes http://bugs.gentoo.org/278760
Based on a patch by Martin von Gagern <Martin.vGagern@gmx.net>
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This patch fixes the build with --enable-config-dbus is enabled
(default disabled).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Fixes Solaris bug 6801386 Xorg core dumps on startup if hald not running
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6801386
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
|
|
If HAL isn't available when we try to connect, the registered NameOwnerChanged
signal handler waits until HAL is available. Once we connected to HAL, we
unregister the signal handler again.
This allows HAL to be started in parallel or after the server has started.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
dbus-core.c:30:1: warning: "DBUS_API_SUBJECT_TO_CHANGE" redefined
<command-line>: warning: this is the location of the previous definition
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
|
|
|
|
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
|
|
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
|
|
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
|
|
They've promised to fix Solaris printf soon to check for NULL pointers
instead of segfaulting, but that won't help people on existing releases.
|
|
|
|
If HAL is restarted, the device list is sent to the server again, leading
first to duplicate devices (and thus duplicate events), and later to a
FatalError "Too many input devices."
dev->config_info contains the UDI for the device. If the UDI of a new devices
is equal to one we already have in the device list, just ignore it.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
|
|
|
