diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/fec_main.c')
| -rw-r--r-- | drivers/net/ethernet/freescale/fec_main.c | 10 |
1 files changed, 6 insertions, 4 deletions
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 5ebdf8dc8a31..bba87775419d 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -91,7 +91,8 @@ static struct platform_device_id fec_devtype[] = { .driver_data = 0, }, { .name = "imx28-fec", - .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME, + .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME | + FEC_QUIRK_SINGLE_MDIO, }, { .name = "imx6q-fec", .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | @@ -1937,7 +1938,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) int err = -ENXIO, i; /* - * The dual fec interfaces are not equivalent with enet-mac. + * The i.MX28 dual fec interfaces are not equal. * Here are the differences: * * - fec0 supports MII & RMII modes while fec1 only supports RMII @@ -1952,7 +1953,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) * mdio interface in board design, and need to be configured by * fec0 mii_bus. */ - if ((fep->quirks & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) { + if ((fep->quirks & FEC_QUIRK_SINGLE_MDIO) && fep->dev_id > 0) { /* fec1 uses fec0 mii_bus */ if (mii_cnt && fec0_mii_bus) { fep->mii_bus = fec0_mii_bus; @@ -2015,7 +2016,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) mii_cnt++; /* save fec0 mii_bus */ - if (fep->quirks & FEC_QUIRK_ENET_MAC) + if (fep->quirks & FEC_QUIRK_SINGLE_MDIO) fec0_mii_bus = fep->mii_bus; return 0; @@ -3129,6 +3130,7 @@ fec_probe(struct platform_device *pdev) pdev->id_entry = of_id->data; fep->quirks = pdev->id_entry->driver_data; + fep->netdev = ndev; fep->num_rx_queues = num_rx_qs; fep->num_tx_queues = num_tx_qs; |