/* * Copyright (C) Overkiz SAS 2012 * * Author: Boris BREZILLON * License terms: GNU General Public License (GPL) version 2 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define NPWM 6 #define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA | ATMEL_TC_ACPC | \ ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG) #define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB | ATMEL_TC_BCPC | \ ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG) struct atmel_tcb_pwm_device { enum pwm_polarity polarity; /* PWM polarity */ unsigned div; /* PWM clock divider */ unsigned duty; /* PWM duty expressed in clk cycles */ unsigned period; /* PWM period expressed in clk cycles */ }; struct atmel_tcb_pwm_chip { struct pwm_chip chip; spinlock_t lock; struct atmel_tc *tc; struct atmel_tcb_pwm_device *pwms[NPWM]; }; static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip) { return container_of(chip, struct atmel_tcb_pwm_chip, chip); } static int atmel_tcb_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, enum pwm_polarity polarity) { struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); tcbpwm->polarity = polarity; return 0; } static int atmel_tcb_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm; struct atmel_tc *tc = tcbpwmc->tc; void __iomem *regs = tc->regs; unsigned group = pwm->hwpwm / 2; unsigned index = pwm->hwpwm % 2; unsigned cmr; int ret; tcbpwm = devm_kzalloc(chip->dev, sizeof(*tcbpwm), GFP_KERNEL); if (!tcbpwm) return -ENOMEM; ret = clk_prepare_enable(tc->clk[group]); if (ret) { devm_kfree(chip->dev, tcbpwm); return ret; } pwm_set_chip_data(pwm, tcbpwm); tcbpwm->polarity = PWM_POLARITY_NORMAL; tcbpwm->duty = 0; tcbpwm->period = 0; tcbpwm->div = 0; spin_lock(&tcbpwmc->lock); cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR)); /* * Get init config from Timer Counter registers if * Timer Counter is already configured as a PWM generator. */ if (cmr & ATMEL_TC_WAVE) { if (index == 0) tcbpwm->duty = __raw_readl(regs + ATMEL_TC_REG(group, RA)); else tcbpwm->duty = __raw_readl(regs + ATMEL_TC_REG(group, RB)); tcbpwm->div = cmr & ATMEL_TC_TCCLKS; tcbpwm->period = __raw_readl(regs + ATMEL_TC_REG(group, RC)); cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK | ATMEL_TC_BCMR_MASK); } else cmr = 0; cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0; __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR)); spin_unlock(&tcbpwmc->lock); tcbpwmc->pwms[pwm->hwpwm] = tcbpwm; return 0; } static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); struct atmel_tc *tc = tcbpwmc->tc; clk_disable_unprepare(tc->clk[pwm->hwpwm / 2]); tcbpwmc->pwms[pwm->hwpwm] = NULL; devm_kfree(chip->dev, tcbpwm); } static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); struct atmel_tc *tc = tcbpwmc->tc; void __iomem *regs = tc->regs; unsigned group = pwm->hwpwm / 2; unsigned index = pwm->hwpwm % 2; unsigned cmr; enum pwm_polarity polarity = tcbpwm->polarity; /* * If duty is 0 the timer will be stopped and we have to * configure the output correctly on software trigger: * - set output to high if PWM_POLARITY_INVERSED * - set output to low if PWM_POLARITY_NORMAL * * This is why we're reverting polarity in this case. */ if (tcbpwm->duty == 0) polarity = !polarity; spin_lock(&tcbpwmc->lock); cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR)); /* flush old setting and set the new one */ if (index == 0) { cmr &= ~ATMEL_TC_ACMR_MASK; if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_ASWTRG_CLEAR; else cmr |= ATMEL_TC_ASWTRG_SET; } else { cmr &= ~ATMEL_TC_BCMR_MASK; if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_BSWTRG_CLEAR; else cmr |= ATMEL_TC_BSWTRG_SET; } __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR)); /* * Use software trigger to apply the new setting. * If both PWM devices in this group are disabled we stop the clock. */ if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) __raw_writel(ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(group, CCR)); else __raw_writel(ATMEL_TC_SWTRG, regs + ATMEL_TC_REG(group, CCR)); spin_unlock(&tcbpwmc->lock); } static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); struct atmel_tc *tc = tcbpwmc->tc; void __iomem *regs = tc->regs; unsigned group = pwm->hwpwm / 2; unsigned index = pwm->hwpwm % 2; u32 cmr; enum pwm_polarity polarity = tcbpwm->polarity; /* * If duty is 0 the timer will be stopped and we have to * configure the output correctly on software trigger: * - set output to high if PWM_POLARITY_INVERSED * - set output to low if PWM_POLARITY_NORMAL * * This is why we're reverting polarity in this case. */ if (tcbpwm->duty == 0) polarity = !polarity; spin_lock(&tcbpwmc->lock); cmr = __raw_readl(regs + ATMEL_TC_REG(group, CMR)); /* flush old setting and set the new one */ cmr &= ~ATMEL_TC_TCCLKS; if (index == 0) { cmr &= ~ATMEL_TC_ACMR_MASK; /* Set CMR flags according to given polarity */ if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_ASWTRG_CLEAR; else cmr |= ATMEL_TC_ASWTRG_SET; } else { cmr &= ~ATMEL_TC_BCMR_MASK; if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_BSWTRG_CLEAR; else cmr |= ATMEL_TC_BSWTRG_SET; } /* * If duty is 0 or equal to period there's no need to register * a specific action on RA/RB and RC compare. * The output will be configured on software trigger and keep * this config till next config call. */ if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) { if (index == 0) { if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR; else cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET; } else { if (polarity == PWM_POLARITY_INVERSED) cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR; else cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET; } } cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS); __raw_writel(cmr, regs + ATMEL_TC_REG(group, CMR)); if (index == 0) __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RA)); else __raw_writel(tcbpwm->duty, regs + ATMEL_TC_REG(group, RB)); __raw_writel(tcbpwm->period, regs + ATMEL_TC_REG(group, RC)); /* Use software trigger to apply the new setting */ __raw_writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, regs + ATMEL_TC_REG(group, CCR)); spin_unlock(&tcbpwmc->lock); return 0; } static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns) { struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip); struct atmel_tcb_pwm_device *tcbpwm = pwm_get_chip_data(pwm); unsigned group = pwm->hwpwm / 2; unsigned index = pwm->hwpwm % 2; struct atmel_tcb_pwm_device *atcbpwm = NULL; struct atmel_tc *tc = tcbpwmc->tc; int i; int slowclk = 0; unsigned period; unsigned duty; unsigned rate = clk_get_rate(tc->clk[group]); unsigned long long min; unsigned long long max; /* * Find best clk divisor: * the smallest divisor which can fulfill the period_ns requirements. */ for (i = 0; i < 5; ++i) { if (atmel_tc_divisors[i] == 0) { slowclk = i; continue; } min = div_u64((u64)NSEC_PER_SEC * atmel_tc_divisors[i], rate); max = min << tc->tcb_config->counter_width; if (max >= period_ns) break; } /* * If none of the divisor are small enough to represent period_ns * take slow clock (32KHz). */ if (i == 5) { i = slowclk; rate = clk_get_rate(tc->slow_clk); min = div_u64(NSEC_PER_SEC, rate); max = min << tc->tcb_config->counter_width; /* If period is too big return ERANGE error */ if (max < period_ns) return -ERANGE; } duty = div_u64(duty_ns, min); period = div_u64(period_ns, min); if (index == 0) atcbpwm = tcbpwmc->pwms[pwm->hwpwm + 1]; else atcbpwm = tcbpwmc->pwms[pwm->hwpwm - 1]; /* * PWM devices provided by TCB driver are grouped by 2: * - group 0: PWM 0 & 1 * - group 1: PWM 2 & 3 * - group 2: PWM 4 & 5 * * PWM devices in a given group must be configured with the * same period_ns. * * We're checking the period value of the second PWM device * in this group before applying the new config. */ if ((atcbpwm && atcbpwm->duty > 0 && atcbpwm->duty != atcbpwm->period) && (atcbpwm->div != i || atcbpwm->period != period)) { dev_err(chip->dev, "failed to configure period_ns: PWM group already configured with a different value\n"); return -EINVAL; } tcbpwm->period = period; tcbpwm->div = i; tcbpwm->duty = duty; /* If the PWM is enabled, call enable to apply the new conf */ if (pwm_is_enabled(pwm)) atmel_tcb_pwm_enable(chip, pwm); return 0; } static const struct pwm_ops atmel_tcb_pwm_ops = { .request = atmel_tcb_pwm_request, .free = atmel_tcb_pwm_free, .config = atmel_tcb_pwm_config, .set_polarity = atmel_tcb_pwm_set_polarity, .enable = atmel_tcb_pwm_enable, .disable = atmel_tcb_pwm_disable, .owner = THIS_MODULE, }; static int atmel_tcb_pwm_probe(struct platform_device *pdev) { struct atmel_tcb_pwm_chip *tcbpwm; struct device_node *np = pdev->dev.of_node; struct atmel_tc *tc; int err; int tcblock; err = of_property_read_u32(np, "tc-block", &tcblock); if (err < 0) { dev_err(&pdev->dev, "failed to get Timer Counter Block number from device tree (error: %d)\n", err); return err; } tc = atmel_tc_alloc(tcblock); if (tc == NULL) { dev_err(&pdev->dev, "failed to allocate Timer Counter Block\n"); return -ENOMEM; } tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL); if (tcbpwm == NULL) { err = -ENOMEM; dev_err(&pdev->dev, "failed to allocate memory\n"); goto err_free_tc; } tcbpwm->chip.dev = &pdev->dev; tcbpwm->chip.ops = &atmel_tcb_pwm_ops; tcbpwm->chip.of_xlate = of_pwm_xlate_with_flags; tcbpwm->chip.of_pwm_n_cells = 3; tcbpwm->chip.base = -1; tcbpwm->chip.npwm = NPWM; tcbpwm->tc = tc; err = clk_prepare_enable(tc->slow_clk); if (err) goto err_free_tc; spin_lock_init(&tcbpwm->lock); err = pwmchip_add(&tcbpwm->chip); if (err < 0) goto err_disable_clk; platform_set_drvdata(pdev, tcbpwm); return 0; err_disable_clk: clk_disable_unprepare(tcbpwm->tc->slow_clk); err_free_tc: atmel_tc_free(tc); return err; } static int atmel_tcb_pwm_remove(struct platform_device *pdev) { struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev); int err; clk_disable_unprepare(tcbpwm->tc->slow_clk); err = pwmchip_remove(&tcbpwm->chip); if (err < 0) return err; atmel_tc_free(tcbpwm->tc); return 0; } static const struct of_device_id atmel_tcb_pwm_dt_ids[] = { { .compatible = "atmel,tcb-pwm", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids); static struct platform_driver atmel_tcb_pwm_driver = { .driver = { .name = "atmel-tcb-pwm", .of_match_table = atmel_tcb_pwm_dt_ids, }, .probe = atmel_tcb_pwm_probe, .remove = atmel_tcb_pwm_remove, }; module_platform_driver(atmel_tcb_pwm_driver); MODULE_AUTHOR("Boris BREZILLON "); MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver"); MODULE_LICENSE("GPL v2"); tion value='libreoffice-5-0-3'>libreoffice-5-0-3 Unnamed repository; edit this file to name it for gitweb.root
summaryrefslogtreecommitdiff
AgeCommit message (Expand)AuthorFilesLines
2022-06-24update translations for 7.3.4 rc2cp-22.05.3-1Christian Lohmaier300-6017/+6009
2022-06-24update translations for 7.3.4 rc1Christian Lohmaier340-6976/+6866
2022-04-28update translations for 7.3.3 rc2co-22.05.2-1co-22.05.1-1Christian Lohmaier301-5645/+5568
2022-04-28update translations for 7.3.3 rc1Christian Lohmaier98-1927/+1930
2022-04-12update translations for 7.3.3 rc1Christian Lohmaier473-13113/+14640
2022-04-12update translations for 7.3.2 rc2Christian Lohmaier335-7289/+6951
2022-04-12update translations for 7.3.2 rc1Christian Lohmaier249-4552/+4335
2022-03-09update translations for 7.3.1 rc3Christian Lohmaier212-3254/+3087
2022-03-09update translations for 7.3.1 rc2Christian Lohmaier317-4063/+3993
2022-02-13update translations for 7.3.1 rc1Christian Lohmaier57-1014/+1021
2022-02-13update translations for 7.3.1 rc1Christian Lohmaier432-10266/+10150
2022-01-26update translations for 7.3.0 rc3co-22.05-branch-pointChristian Lohmaier505-12876/+12814
2022-01-20Updated Slovenian translationMartin Srebotnjak44-344/+344
2022-01-12update translations for 7.3.0 rc2Christian Lohmaier83-1455/+1480
2022-01-12Updated Slovenian translationMartin Srebotnjak18-837/+801
2022-01-10update translations for 7.3.0 rc2/masterChristian Lohmaier1041-31885/+30026
2021-12-21update translations for 7.3.0 rc1Christian Lohmaier2024-164674/+208201
2021-12-19Updated Slovenian translationMartin Srebotnjak14-581/+1104
2021-12-07Updated Slovenian translationMartin Srebotnjak18-1725/+1905
2021-11-25Branch libreoffice-7-3Christian Lohmaier0-0/+0
2021-11-25update translations for 7.3.0 beta1libreoffice-7-3-branch-pointChristian Lohmaier600-193107/+197325
2021-11-25Updated Slovenian translationMartin Srebotnjak22-1694/+2244
2021-11-24update translations for master/7.3.0 beta1Christian Lohmaier2094-194498/+219039
2021-11-17Updated Slovenian translationMartin Srebotnjak34-4233/+6825
2021-11-16update translations for masterChristian Lohmaier2911-433817/+529016
2021-10-29update translations for 7.3.0 alpha1Christian Lohmaier495-25522/+125962
2021-10-26Update Slovenian translation (xml tag fixes)Martin Srebotnjak6-24/+24
2021-10-25update translations for masterChristian Lohmaier