summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-06-16Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux ↵drm-fixes-for-v4.7-rc4Dave Airlie13-56/+175
into drm-fixes radeon and amdgpu fixes for 4.7. Highlights: - fixes for GPU VM passthrough - fixes for powerplay on Polaris GPUs - pll fixes for rs780/880 * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: select samu dpm 0 as boot level on polaris. drm/amd/powerplay: update powerplay table parsing Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx" drm/amdgpu/gfx7: fix broken condition check drm/radeon: fix asic initialization for virtualized environments amdgpu: fix asic initialization for virtualized environments (v2) drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabled drm/radeon: do not hard reset GPU while freezing on r600/r700 family
2016-06-16Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux ↵Dave Airlie1-0/+1
into drm-fixes just a single fix for a regression introduced by IOMMU API changes in v4.7. * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: initialize iommu domain page size
2016-06-15drm/etnaviv: initialize iommu domain page sizeLucas Stach1-0/+1
Since d16e0faab91 (iommu: Allow selecting page sizes per domain) the iommu core demands the page size to be set per domain, otherwise any mapping attempts will be dropped. Make sure to set a valid page size for the etnaviv iommu. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2016-06-15Merge branch 'linux-4.7' of git://github.com/skeggsb/linux into drm-fixesDave Airlie2-8/+10
* 'linux-4.7' of git://github.com/skeggsb/linux: drm/nouveau/iccsense: fix memory leak drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"
2016-06-15drm/nouveau/iccsense: fix memory leakBen Skeggs1-7/+9
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-06-15drm/nouveau/Revert "drm/nouveau/device/pci: set as non-CPU-coherent on ARM64"Robin Murphy1-1/+1
This reverts commit 1733a2ad36741b1812cf8b3f3037c28d0af53f50. There is apparently something amiss with the way the TTM code handles DMA buffers, which the above commit was attempting to work around for arm64 systems with non-coherent PCI. Unfortunately, this completely breaks systems *with* coherent PCI (which appear to be the majority). Booting a plain arm64 defconfig + CONFIG_DRM + CONFIG_DRM_NOUVEAU on a machine with a PCI GPU having coherent dma_map_ops (in this case a 7600GT card plugged into an ARM Juno board) results in a fatal crash: [ 2.803438] nouveau 0000:06:00.0: DRM: allocated 1024x768 fb: 0x9000, bo ffffffc976141c00 [ 2.897662] Unable to handle kernel NULL pointer dereference at virtual address 000001ac [ 2.897666] pgd = ffffff8008e00000 [ 2.897675] [000001ac] *pgd=00000009ffffe003, *pud=00000009ffffe003, *pmd=0000000000000000 [ 2.897680] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 2.897685] Modules linked in: [ 2.897692] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc5+ #543 [ 2.897694] Hardware name: ARM Juno development board (r1) (DT) [ 2.897699] task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000 [ 2.897711] PC is at __memcpy+0x7c/0x180 [ 2.897719] LR is at OUT_RINGp+0x34/0x70 [ 2.897724] pc : [<ffffff80083465fc>] lr : [<ffffff800854248c>] pstate: 80000045 [ 2.897726] sp : ffffffc9768ab360 [ 2.897732] x29: ffffffc9768ab360 x28: 0000000000000001 [ 2.897738] x27: ffffffc97624c000 x26: 0000000000000000 [ 2.897744] x25: 0000000000000080 x24: 0000000000006c00 [ 2.897749] x23: 0000000000000005 x22: ffffffc97624c010 [ 2.897755] x21: 0000000000000004 x20: 0000000000000004 [ 2.897761] x19: ffffffc9763da000 x18: ffffffc976b2491c [ 2.897766] x17: 0000000000000007 x16: 0000000000000006 [ 2.897771] x15: 0000000000000001 x14: 0000000000000001 [ 2.897777] x13: 0000000000e31b70 x12: ffffffc9768a0080 [ 2.897783] x11: 0000000000000000 x10: fffffffffffffb00 [ 2.897788] x9 : 0000000000000000 x8 : 0000000000000000 [ 2.897793] x7 : 0000000000000000 x6 : 00000000000001ac [ 2.897799] x5 : 00000000ffffffff x4 : 0000000000000000 [ 2.897804] x3 : 0000000000000010 x2 : 0000000000000010 [ 2.897810] x1 : ffffffc97624c010 x0 : 00000000000001ac ... [ 2.898494] Call trace: [ 2.898499] Exception stack(0xffffffc9768ab1a0 to 0xffffffc9768ab2c0) [ 2.898506] b1a0: ffffffc9763da000 0000000000000004 ffffffc9768ab360 ffffff80083465fc [ 2.898513] b1c0: ffffffc976801e00 ffffffc9762b8000 ffffffc9768ab1f0 ffffff80080ec158 [ 2.898520] b1e0: ffffffc9768ab230 ffffff8008496d04 ffffffc975ce6d80 ffffffc9768ab36e [ 2.898527] b200: ffffffc9768ab36f ffffffc9768ab29d ffffffc9768ab29e ffffffc9768a0000 [ 2.898533] b220: ffffffc9768ab250 ffffff80080e70c0 ffffffc9768ab270 ffffff8008496e44 [ 2.898540] b240: 00000000000001ac ffffffc97624c010 0000000000000010 0000000000000010 [ 2.898546] b260: 0000000000000000 00000000ffffffff 00000000000001ac 0000000000000000 [ 2.898552] b280: 0000000000000000 0000000000000000 fffffffffffffb00 0000000000000000 [ 2.898558] b2a0: ffffffc9768a0080 0000000000e31b70 0000000000000001 0000000000000001 [ 2.898566] [<ffffff80083465fc>] __memcpy+0x7c/0x180 [ 2.898574] [<ffffff800853e164>] nv04_fbcon_imageblit+0x1d4/0x2e8 [ 2.898582] [<ffffff800853d6d0>] nouveau_fbcon_imageblit+0xd8/0xe0 [ 2.898591] [<ffffff80083c4db4>] soft_cursor+0x154/0x1d8 [ 2.898598] [<ffffff80083c47b4>] bit_cursor+0x4fc/0x538 [ 2.898605] [<ffffff80083c0cfc>] fbcon_cursor+0x134/0x1a8 [ 2.898613] [<ffffff800841c280>] hide_cursor+0x38/0xa0 [ 2.898620] [<ffffff800841d420>] redraw_screen+0x120/0x228 [ 2.898628] [<ffffff80083bf268>] fbcon_prepare_logo+0x370/0x3f8 [ 2.898635] [<ffffff80083bf640>] fbcon_init+0x350/0x560 [ 2.898641] [<ffffff800841c634>] visual_init+0xac/0x108 [ 2.898648] [<ffffff800841df14>] do_bind_con_driver+0x1c4/0x3a8 [ 2.898655] [<ffffff800841e4f4>] do_take_over_console+0x174/0x1e8 [ 2.898662] [<ffffff80083bf8c4>] do_fbcon_takeover+0x74/0x100 [ 2.898669] [<ffffff80083c3e44>] fbcon_event_notify+0x8cc/0x920 [ 2.898680] [<ffffff80080d7e38>] notifier_call_chain+0x50/0x90 [ 2.898685] [<ffffff80080d8214>] __blocking_notifier_call_chain+0x4c/0x90 [ 2.898691] [<ffffff80080d826c>] blocking_notifier_call_chain+0x14/0x20 [ 2.898696] [<ffffff80083c5e1c>] fb_notifier_call_chain+0x1c/0x28 [ 2.898703] [<ffffff80083c81ac>] register_framebuffer+0x1cc/0x2e0 [ 2.898712] [<ffffff800845da80>] drm_fb_helper_initial_config+0x288/0x3e8 [ 2.898719] [<ffffff800853da20>] nouveau_fbcon_init+0xe0/0x118 [ 2.898727] [<ffffff800852d2f8>] nouveau_drm_load+0x268/0x890 [ 2.898734] [<ffffff8008466e24>] drm_dev_register+0xbc/0xc8 [ 2.898740] [<ffffff8008468a88>] drm_get_pci_dev+0xa0/0x180 [ 2.898747] [<ffffff800852cb28>] nouveau_drm_probe+0x1a0/0x1e0 [ 2.898755] [<ffffff80083a32e0>] pci_device_probe+0x98/0x110 [ 2.898763] [<ffffff800858e434>] driver_probe_device+0x204/0x2b0 [ 2.898770] [<ffffff800858e58c>] __driver_attach+0xac/0xb0 [ 2.898777] [<ffffff800858c3e0>] bus_for_each_dev+0x60/0xa0 [ 2.898783] [<ffffff800858dbc0>] driver_attach+0x20/0x28 [ 2.898789] [<ffffff800858d7b0>] bus_add_driver+0x1d0/0x238 [ 2.898796] [<ffffff800858ed50>] driver_register+0x60/0xf8 [ 2.898802] [<ffffff80083a20dc>] __pci_register_driver+0x3c/0x48 [ 2.898809] [<ffffff8008468eb4>] drm_pci_init+0xf4/0x120 [ 2.898818] [<ffffff8008c56fc0>] nouveau_drm_init+0x21c/0x230 [ 2.898825] [<ffffff80080829d4>] do_one_initcall+0x8c/0x190 [ 2.898832] [<ffffff8008c31af4>] kernel_init_freeable+0x14c/0x1f0 [ 2.898839] [<ffffff80088a0c20>] kernel_init+0x10/0x100 [ 2.898845] [<ffffff8008085e10>] ret_from_fork+0x10/0x40 [ 2.898853] Code: a88120c7 a8c12027 a88120c7 a8c12027 (a88120c7) [ 2.898871] ---[ end trace d5713dcad023ee04 ]--- [ 2.898888] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b In a toss-up between the GPU seeing stale data artefacts on some systems vs. catastrophic kernel crashes on other systems, the latter would seem to take precedence, so revert this change until the real underlying problem can be fixed. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> [acourbot@nvidia.com: port to Nouveau tree, remove bits in lib/] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2016-06-15drm/amd/powerplay: select samu dpm 0 as boot level on polaris.Rex Zhu1-4/+1
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-15drm/amd/powerplay: update powerplay table parsingRex Zhu4-34/+97
to handle pptable format change on Polaris boards Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-15drm/dp/mst: Always clear proposed vcpi table for port.Andrey Grodzovsky1-5/+3
Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch. Fixes: 91a25e463130 ("drm/dp/mst: deallocate payload on port destruction") Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Cc: Mykola Lysenko <Mykola.Lysenko@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com>
2016-06-15drm/crtc: only store the necessary data for set_config rollbackPhilipp Zabel1-18/+18
drm_crtc_helper_set_config only potentially touches connector->encoder and encoder->crtc, so we only have to store those for all connectors and encoders, respectively. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-06-15drm/crtc: fix connector reference counting mismatch in ↵Philipp Zabel1-8/+10
drm_crtc_helper_set_config Since commit 0955c1250e96 ("drm/crtc: take references to connectors used in a modeset. (v2)"), the reference counts of all connectors in the drm_mode_set given to drm_crtc_helper_set_config are incremented, and then the reference counts of all connectors are decremented on success, but in a temporary copy of the connector structure. This leads to the following error after the first modeset on imx-drm: Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = ad8c4000 [00000004] *pgd=3d9c5831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 190 Comm: kmsfb-manage Not tainted 4.7.0-rc1+ #657 Hardware name: Freescale i.MX6 Quad/DualLit: [<80506098>] lr : [<80252e94>] psr: 200c0013 sp : adca7ca8 ip : adca7b90 fp : adca7cd4 r10: 00000000 r9 : 00000100 r8 : 00000200 r7 : af3c9800 r6 : aded7848 r5 : aded7800 r4 : 00000000 r3 : af3ca058 r2 : 00000200 r1 : af3ca058 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 3d8c404a DAC: 00000051 Process kmsfb-manage (pid: 190, stack limit = 0xadca6210) Stack: (0xadca7ca8 to 0xadca8000) 7ca0: 805190e0 aded7800 aded7820 80501a88 8155a290 af3c9c6c 7cc0: adca7ddc 0000000f adca7cec adca7cd8 80519104 80506044 805190e0 aded7800 7ce0: adca7d04 adca7cf0 80501ac0 805190ec aded7820 aded7814 adca7d24 adca7d08 7d00: 804fdb80 80501a94 aded7800 af3ca010 aded7afc af3c9c60 adca7d94 adca7d28 7d20: 804e3518 804fdb20 00000000 af3c9b1c adca7d50 81506f44 00000000 8093c500 7d40: af3c9c6c ae4f2ca8 ae4f2c18 00000000 00000000 ae637f00 00000000 aded7800 7d60: 00000001 af3c9800 af23c300 ae77fcc0 ae4f2c18 00000001 af3c9800 8155a290 7d80: af1af700 adca6000 adca7db4 adca7d98 804fea6c 804e2de4 adca7e50 adb3d940 7da0: 00000001 af3c9800 adca7e24 adca7db8 8050440c 804fea0c ae77fcc0 00000003 7dc0: adca7e24 adb3d940 af1af700 ae77fcc0 ae77fccc ae4f2c18 8083d44c ae77fcc0 7de0: ae4002 80d03040 adca7e64 adca7e40 adca7e50 80503f08 7e40: 7ebd5630 adca7e50 00000068 c06864a2 7ebd5be8 00000000 00000001 00000018 7e60: 00000026 00000000 00000000 00000000 00000001 000115bc 05010500 05a0059f 7e80: 03200000 03360321 00000337 0000003c 00000000 00000040 30383231 30303878 7ea0: 00000000 00000000 00000000 00000000 00000000 00000000 80173058 80172e30 7ec0: 80d77d32 00004000 adf7d900 00000003 00000000 7ebd5630 af342bb0 adfe3b80 7ee0: 80272f50 00000003 adca6000 00000000 adca7f7c adca7f00 802725ec 804f52cc 7f00: 802809cc 80178450 00000000 00000000 80280880 80145904 adb3d8c0 adf7d990 7f20: ffffffff 00000003 00004000 01614c10 c06864a2 00000003 adca6000 00000000 7f40: adca7f6c adca7f50 80280b04 8028088c 000115bc adfe3b81 7ebd5630 adfe3b80 7f60: c06864a2 00000003 adca6000 00000000 adca7fa4 adca7f80 80272f50 80272548 7f80: 000115bc 00017050 00000001 01614c10 00000036 801089e4 00000000 adca7fa8 7fa0: 80108840 80272f18 00017050 00000001 00000003 c06864a2 7ebd5630 000115bc 7fc0: 00017050 00000001 01614c10 00000036 00000003 00000000 00000026 00000018 7fe0: 00016f38 7ebd562c 0000b5e9 76ef31e6 400c0030 00000003 ff5f37db bfe7dd4d Backtrace: [<80506038>] (drm_connector_cleanup) from [<80519104>] (dw_hdmi_connector_destroy+0x24/0x28) r10:0000000f r9:adca7ddc r8:af3c9c6c r7:8155a290 r6:80501a88 r5:aded7820 r4:aded7800 r3:805190e0 [<805190e0>] (dw_hdmi_connector_destroy) from [<80501ac0>] (drm_connector_free+0x38/0x3c) r4:aded7800 nreference) from [<804e3518>] (drm_crtc_helper_set_config+0x740/0xbf4) r6:af3c9c60 r5:aded7afc r4:af3ca010 r3:aded7800 [<804e2dd8>] (drm_crtc_helper_set_config) from [<804fea6c>] (drm_mode_set_config_internal+0x6c/0xf4) r10:adca6000 r9:af1af700 r8:8155a290 r7:af3c9800 r6:00000001 r5:ae4f2c18 r4:ae77fcc0 [<804fea00>] (drm_mode_set_config_internal) from [<8050440c>] (drm_mode_setcrtc+0x504/0x57c) r7:af3c9800 r6:00000001 r5:adb3d940 r4:adca7e50 [<80503f08>] (drm_mode_setcrtc) from [<804f5404>] (drm_ioctl+0x144/0x4dc) r10:ada2e000 r9:000000a2 r8:af3c9800 r7:8155a290 r6:809320b4 r5:00000051 r4:adca7e50 [<804f52c0>] (drm_ioctl) from [<802725ec>] (do_vfs_ioctl+0xb0/0x9d0) r10:00000000 r9:adca6000 r8:00000003 r7:80272f50 r6:adfe3b80 r5:af342bb0 r4:7ebd5630 [<8027253c>] (do_vfs_ioctl) from [<80272f50>] (SyS_ioctl+0x44/0x6c) r10:00000000 r9:adca6000 r8:00000003 r7:c06864a2 r6:adfe3b80 r5:7ebd5630 r4:adfe3b81 [<80272f0c>] (SyS_ioctl) from [<80108840>] (ret_fast_syscall+0x0/0x1c) r8:801089e4 r7:00000036 r6:01614c10 r5:00000001 r4:00017050 r3:000115bc Code: 0a00000c e5932004 e1a01003 e1a0a004 (e5842004) ---[ end trace 9a7257572ccacb16 ]--- Only the reference count of connectors that weren't previously bound to an encoder should be incremented after a call to drm_crtc_helper_set_config. And only the reference count of connectors that were previously bound to an encoder and are unbound afterwards should ever be decremented. The reference counts of the temporary copies in the save_connectors should not be touched at all. This patch fixes the above error by only incrementing the reference count of those connectors in the set that are initially not bound to any encoder, and also by restoring the reference count of only those connectors in the set in the failure case. "Note that this can only be hit when fbdev emulation is disabled, since then the refcount drops from 1 to 0 and we call the connector destroy functions on the backup copy, which eventually results in tears. With fbdev emulation the refcount only goes down from 2 to 1 ever. And since we unconditionally increment the refcount on the real object, the refcount of that will slowly increase. The backup connector's refcount doesn't matter, since we kfree() that either way in the end of drm_crtc_helper_set_config()." Fixes: 0955c1250e96 ("drm/crtc: take references to connectors used in a modeset. (v2)") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-06-15Merge tag 'drm-intel-fixes-2016-06-14' of ↵Dave Airlie10-41/+132
git://anongit.freedesktop.org/drm-intel into drm-fixes "Pretty much all regression fixes, or black screens." * tag 'drm-intel-fixes-2016-06-14' of git://anongit.freedesktop.org/drm-intel: drm/i915/ilk: Don't disable SSC source if it's in use drm/i915: Extract physical display dimensions from VBT drm/i915: Check VBT for port presence in addition to the strap on VLV/CHV drm/i915: Only ignore eDP ports that are connected drm/i915: Silence "unexpected child device config size" for VBT on 845g drm/i915: Fix NULL pointer deference when out of PLLs in IVB
2016-06-14drm/i915/ilk: Don't disable SSC source if it's in useLyude1-14/+34
Thanks to Ville Syrjälä for pointing me towards the cause of this issue. Unfortunately one of the sideaffects of having the refclk for a DPLL set to SSC is that as long as it's set to SSC, the GPU will prevent us from powering down any of the pipes or transcoders using it. A couple of BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL configurations. This causes issues on the first modeset, since we don't expect SSC to be left on and as a result, can't successfully power down the pipes or the transcoders using it. Here's an example from this Dell OptiPlex 990: [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled [drm:intel_modeset_init] 2 display pipes available. [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_crt_reset] crt adpa set to 0xf40000 [drm:intel_dp_init_connector] Adding DP connector on port C [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 [drm:ironlake_init_pch_refclk] Disabling SSC entirely … later we try committing the first modeset … [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A [drm:intel_dump_pipe_config] cpu_transcoder: A … [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258 [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600 [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A [drm:intel_disable_pipe] disabling pipe A ------------[ cut here ]------------ WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915] pipe_off wait timed out … ---[ end trace 94fc8aa03ae139e8 ]--- [drm:intel_dp_link_down] [drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A Later modesets succeed since they reset the DPLL's configuration anyway, but this is enough to get stuck with a big fat warning in dmesg. A better solution would be to add refcounts for the SSC source, but for now leaving the source clock on should suffice. Changes since v4: - Fix calculation of final for systems with LVDS panels (fixes BUG() on CI test suite) Changes since v3: - Move temp variable into loop - Move checks for using_ssc_source to after we've figured out has_ck505 - Add using_ssc_source to debug output Changes since v2: - Fix debug output for when we disable the CPU source Changes since v1: - Leave the SSC source clock on instead of just shutting it off on all of the DPLL configurations. Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-06-13Revert "drm/amdgpu: add pipeline sync while vmid switch in same ctx"Alex Deucher3-13/+6
This reverts commit 2ba272d7bde27e1db2cf1c6cee49b01b7ea08989. The issue fixed by this patch is specific to compute rings and the previous patch was enough. Additionally, this patch as been traced to strange behavior on some CZ systems so we might as well drop it.
2016-06-13drm/amdgpu/gfx7: fix broken condition checkAlex Deucher1-1/+1
Wrong operator. Reported-by: David Binderman <linuxdev.baldrick@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-13drm/radeon: fix asic initialization for virtualized environmentsAlex Deucher1-0/+21
When executing in a PCI passthrough based virtuzliation environment, the hypervisor will usually attempt to send a PCIe bus reset signal to the ASIC when the VM reboots. In this scenario, the card is not correctly initialized, but we still consider it to be posted. Therefore, in a passthrough based environemnt we should always post the card to guarantee it is in a good state for driver initialization. Ported from amdgpu commit: amdgpu: fix asic initialization for virtualized environments Cc: Andres Rodriguez <andres.rodriguez@amd.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-06-13amdgpu: fix asic initialization for virtualized environments (v2)Andres Rodriguez4-1/+45
When executing in a PCI passthrough based virtuzliation environemnt, the hypervisor will usually attempt to send a PCIe bus reset signal to the ASIC when the VM reboots. In this scenario, the card is not correctly initialized, but we still consider it to be posted. Therefore, in a passthrough based environemnt we should always post the card to guarantee it is in a good state for driver initialization. However, if we are operating in SR-IOV mode it is up to the GIM driver to manage the asic state, therefore we should not post the card (and shouldn't be able to do it either). v2: add missing semi-colon Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-13drm/radeon: don't use fractional dividers on RS[78]80 if SS is enabledChristian König1-2/+3
Seems to cause problems for some older hardware. Kudos to Thom Kouwenhoven for working a lot with the PLLs and figuring this out. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-13drm/radeon: do not hard reset GPU while freezing on r600/r700 familyJérôme Glisse1-1/+1
Seems r600/r700 does not like hard reset while freezing for hibernation (regression due to 274ad65c9d02bdcbee9bae045517864c3521d530 which itself is a fix for hibernation on some GPU families). Until i can debug further issue with r600, let just disable this for r600/r700 as they are very similar family and bug affecting one likely affect the other. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-11Merge tag 'drm-amdkfd-fixes-2016-06-03' of ↵Dave Airlie2-28/+44
git://people.freedesktop.org/~gabbayo/linux into drm-fixes * tag 'drm-amdkfd-fixes-2016-06-03' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: print once about mem_banks truncation drm/amdkfd: destroy dbgmgr in notifier release drm/amdkfd: unbind only existing processes
2016-06-10drm/i915: Extract physical display dimensions from VBTVille Syrjälä5-4/+18
The VBT has these mysterious H/V image sizes as part of the display timings. Looking at some dumps those appear to be the physical dimensions in mm. Which makes sense since the timing descriptor matches the format used by EDID detailed timing descriptor, which defines these as "H/V Addressable Video Image Size in mm". So let's use that information from the panel fixed mode to get the physical dimensions for LVDS/eDP/DSI displays. And with that we can fill out the display_info so that userspace can get at it via GetConnector. v2: Use (hi<<8)|lo instead of broken (hi<<4)+lo Handle LVDS and eDP too Cc: Stephen Just <stephenjust@gmail.com> Tested-by: Stephen Just <stephenjust@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96255 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464685714-30507-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com> (cherry picked from commit df457245b5b7515cf97763ebd8975229e34d4cf3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10drm/i915: Check VBT for port presence in addition to the strap on VLV/CHVVille Syrjälä4-9/+64
Apparently some CHV boards failed to hook up the port presence straps for HDMI ports as well (earlier we assumed this problem only affected eDP ports). So let's check the VBT in addition to the strap, and if either one claims that the port is present go ahead and register the relevant connector. While at it, change port D to register DP before HDMI as we do for ports B and C since commit 457c52d87e5d ("drm/i915: Only ignore eDP ports that are connected") Also print a debug message when we register a HDMI connector to aid in diagnosing missing/incorrect ports. We already had such a print for DP/eDP. v2: Improve the comment in the code a bit, note the port D change in the commit message Cc: Radoslav Duda <radosd@radosd.com> Tested-by: Radoslav Duda <radosd@radosd.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96321 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464945463-14364-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 22f35042593c2b369861f0b9740efb8065a42db0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10drm/i915: Only ignore eDP ports that are connectedChris Wilson3-18/+17
If the VBT says that a certain port should be eDP (and hence fused off from HDMI), but in reality it isn't, we need to try and acquire the HDMI connection instead. So only trust the VBT edp setting if we can connect to an eDP device on that port. Fixes: d2182a6608 (drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV) References: https://bugs.freedesktop.org/show_bug.cgi?id=96288 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Phidias Chiang <phidias.chiang@canonical.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464766070-31623-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 457c52d87e5dac9a4cf1a6a287e60ea7645067d4) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10drm/i915: Silence "unexpected child device config size" for VBT on 845gChris Wilson1-1/+1
My old 845g complains that the child_device_size inside its VBT, version 110, is incorrect. Let's fiddle with the version matching such that it works with this VBT (i.e. treat BIOS v110 as having the same size as v108). Fixes [drm:intel_bios_init] *ERROR* Unexpected child device config size 27 (expected 33 for VBT version 110) Whether this is correct, no one knows - but it works for this particular machine. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464800923-6054-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit fa05178c5dc3d1a3ad370f101cad01cf9dd3bbf9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10drm/i915: Fix NULL pointer deference when out of PLLs in IVBAnder Conselvan de Oliveira1-0/+3
In commit f9476a6c6d0c ("drm/i915: Refactor platform specifics out of intel_get_shared_dpll()"), the ibx_get_dpll() function lacked an error check, that can lead to a NULL pointer dereference when trying to enable three pipes. BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 IP: [<ffffffffa0482275>] intel_reference_shared_dpll+0x15/0x100 [i915] PGD cec87067 PUD d30ce067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: snd_hda_intel i915 drm_kms_helper drm intel_gtt sch_fq_codel cfg80211 binfmt_misc i2c_algo_bit cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea intel_rapl iosf_mbi x86_pkg_temp_thermal coretemp agpgart kvm_intel snd_hda_codec_hdmi kvm iTCO_wdt snd_hda_codec_realtek snd_hda_codec_generic irqbypass aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd psmouse pcspkr snd_hda_codec i2c_i801 snd_hwdep snd_hda_core snd_pcm snd_timer lpc_ich mfd_core snd soundcore wmi evdev tpm_tis tpm [last unloaded: drm] CPU: 3 PID: 5810 Comm: kms_flip Tainted: G U W 4.6.0-test+ #3 Hardware name: /DZ77BH-55K, BIOS BHZ7710H.86A.0100.2013.0517.0942 05/17/2013 task: ffff8800d3908040 ti: ffff8801166c8000 task.ti: ffff8801166c8000 RIP: 0010:[<ffffffffa0482275>] [<ffffffffa0482275>] intel_reference_shared_dpll+0x15/0x100 [i915] RSP: 0018:ffff8801166cba60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000002 RDX: 0000000000000001 RSI: ffff8800d07f1bf8 RDI: 0000000000000000 RBP: ffff8801166cba88 R08: 0000000000000002 R09: ffff8800d32e5698 R10: 0000000000000001 R11: ffff8800cc89ac88 R12: ffff8800d07f1bf8 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f4c3fc8d8c0(0000) GS:ffff88011bcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000068 CR3: 00000000d3b4c000 CR4: 00000000001406e0 Stack: 0000000000000000 ffff8800d07f1bf8 0000000000000000 ffff8800d04c0000 0000000000000000 ffff8801166cbaa8 ffffffffa04823a7 ffff8800d07f1bf8 ffff8800d32e5698 ffff8801166cbab8 ffffffffa04840cf ffff8801166cbaf0 Call Trace: [<ffffffffa04823a7>] ibx_get_dpll+0x47/0xa0 [i915] [<ffffffffa04840cf>] intel_get_shared_dpll+0x1f/0x50 [i915] [<ffffffffa046d080>] ironlake_crtc_compute_clock+0x280/0x430 [i915] [<ffffffffa0472ac0>] intel_crtc_atomic_check+0x240/0x320 [i915] [<ffffffffa03da18e>] drm_atomic_helper_check_planes+0x14e/0x1d0 [drm_kms_helper] [<ffffffffa0474a0c>] intel_atomic_check+0x5dc/0x1110 [i915] [<ffffffffa029d3aa>] drm_atomic_check_only+0x14a/0x660 [drm] [<ffffffffa029d086>] ? drm_atomic_set_crtc_for_connector+0x96/0x100 [drm] [<ffffffffa029d8d7>] drm_atomic_commit+0x17/0x60 [drm] [<ffffffffa03dc3b7>] restore_fbdev_mode+0x237/0x260 [drm_kms_helper] [<ffffffffa029c65a>] ? drm_modeset_lock_all_ctx+0x9a/0xb0 [drm] [<ffffffffa03de9b3>] drm_fb_helper_restore_fbdev_mode_unlocked+0x33/0x80 [drm_kms_helper] [<ffffffffa03dea2d>] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] [<ffffffffa03de93a>] drm_fb_helper_hotplug_event+0xaa/0xf0 [drm_kms_helper] [<ffffffffa03de9d6>] drm_fb_helper_restore_fbdev_mode_unlocked+0x56/0x80 [drm_kms_helper] [<ffffffffa0490f72>] intel_fbdev_restore_mode+0x22/0x80 [i915] [<ffffffffa04ba45e>] i915_driver_lastclose+0xe/0x20 [i915] [<ffffffffa02810de>] drm_lastclose+0x2e/0x130 [drm] [<ffffffffa028148c>] drm_release+0x2ac/0x4b0 [drm] [<ffffffff811a6b2d>] __fput+0xed/0x1f0 [<ffffffff811a6c6e>] ____fput+0xe/0x10 [<ffffffff81079156>] task_work_run+0x76/0xb0 [<ffffffff8105aaab>] do_exit+0x3ab/0xc60 [<ffffffff810a145f>] ? trace_hardirqs_on_caller+0x12f/0x1c0 [<ffffffff8105c67e>] do_group_exit+0x4e/0xc0 [<ffffffff8105c704>] SyS_exit_group+0x14/0x20 [<ffffffff8158bb25>] entry_SYSCALL_64_fastpath+0x18/0xa8 Code: 14 80 48 8d 34 90 b8 01 00 00 00 d3 e0 09 04 b3 5b 41 5c 5d c3 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 49 89 fe 41 55 41 54 53 <44> 8b 67 68 48 89 f3 48 8b be 08 02 00 00 4c 8b 2e e8 15 9d fd RIP [<ffffffffa0482275>] intel_reference_shared_dpll+0x15/0x100 [i915] RSP <ffff8801166cba60> CR2: 0000000000000068 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: f9476a6c6d0c ("drm/i915: Refactor platform specifics out of intel_get_shared_dpll()") Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1463748426-5956-1-git-send-email-ander.conselvan.de.oliveira@intel.com (cherry picked from commit bb143165510661feda06fd99298b8b3a94af3046) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-06-10Merge branch 'fixes-for-v4.7-rc3' of ↵drm-fixes-for-v4.7-rc3Dave Airlie1-1/+2
http://git.agner.ch/git/linux-drm-fsl-dcu into drm-fixes * 'fixes-for-v4.7-rc3' of http://git.agner.ch/git/linux-drm-fsl-dcu: drm/fsl-dcu: use flat regmap cache
2016-06-10drm/amdgpu: fix warning with powerplay disabled.Dave Airlie1-1/+1
This just fixes a warning when you disable powerplay. Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-06-10Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie31-92/+249
into drm-fixes Mostly memory leak and firmware leak fixes for amdgpu. A bit bigger than usual since this is several weeks worth of fixes. * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: (28 commits) drm/amd/powerplay: delete useless code as pptable changed in vbios. drm/amd/powerplay: fix bug visit array out of bounds drm/amdgpu: fix smu ucode memleak (v2) drm/amdgpu: add release firmware for cgs drm/amdgpu: fix tonga smu_fini mem leak drm/amdgpu: fix fiji smu fini mem leak drm/amdgpu: fix cik sdma ucode memleak drm/amdgpu: fix sdma24 ucode mem leak drm/amdgpu: fix sdma3 ucode mem leak drm/amdgpu: fix uvd fini mem leak drm/amdgpu: fix gfx 7 ucode mem leak drm/amdgpu: fix gfx8 ucode mem leak drm/amdgpu: fix missing free wb for cond_exec drm/amdgpu: fix memleak in pptable_init drm/amdgpu: fix mem leak in atombios drm/amdgpu: fix mem leak in pplib/hwmgr drm/amdgpu: fix mem leak in smumgr drm/amdgpu: add pipeline sync while vmid switch in same ctx drm/amdgpu: vBIOS post only call when mem_size zero drm/amdgpu: modify sdma start sequence ...
2016-06-10Merge branch 'msm-fixes-4.7-rc3' of ↵Dave Airlie6-1/+21
git://people.freedesktop.org/~robclark/linux into drm-fixes * 'msm-fixes-4.7-rc3' of git://people.freedesktop.org/~robclark/linux: drm/msm: fix potential submit error path issue drm/msm: fix some crashes in submit fail path drm/msm: deal with exhausted vmap space better
2016-06-09drm/amd/powerplay: delete useless code as pptable changed in vbios.Rex Zhu1-21/+0
The vbios table changed so this code is useless now. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amd/powerplay: fix bug visit array out of boundsRex Zhu2-2/+2
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix smu ucode memleak (v2)Monk Liu3-0/+5
Properly release the smu ucode in powerplay. v2: agd: add polaris as well Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: add release firmware for cgsMonk Liu2-0/+18
Powerplay uses cgs to load the firmware so add a function to release it as well to avoid leaking it on driver unload. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix tonga smu_fini mem leakMonk Liu1-0/+5
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix fiji smu fini mem leakMonk Liu1-0/+4
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix cik sdma ucode memleakMonk Liu1-0/+11
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix sdma24 ucode mem leakMonk Liu1-0/+10
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix sdma3 ucode mem leakMonk Liu1-0/+10
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix uvd fini mem leakMonk Liu1-9/+10
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix gfx 7 ucode mem leakMonk Liu1-0/+17
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix gfx8 ucode mem leakMonk Liu1-1/+21
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix missing free wb for cond_execMonk Liu1-0/+1
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix memleak in pptable_initMonk Liu2-30/+32
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix mem leak in atombiosMonk Liu1-1/+3
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix mem leak in pplib/hwmgrMonk Liu1-0/+7
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: fix mem leak in smumgrMonk Liu1-0/+1
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: add pipeline sync while vmid switch in same ctxChunming Zhou3-6/+13
Since vmid-mgr supports vmid sharing in one vm, the same ctx could get different vmids for two emits without vm flush, vm_flush could be done in another ring. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: vBIOS post only call when mem_size zeroMonk Liu1-2/+1
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: modify sdma start sequenceMonk Liu3-8/+24
should fist halt engine, and then doing the register programing, and later unhalt engine, and finally run ring_test. this help fix reloading driver hang issue of SDMA ring original sequence is wrong for it programing engine after unhalt, which will lead to fault behavior when doing driver reloading after unloaded. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-06-09drm/amdgpu: init more register for sdmaMonk Liu3-0/+6
This help fix reloading driver hang issue of SDMA ring Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-21 03:32:31 +0000