diff options
Diffstat (limited to 'hw/xfree86/xorgconf.cpp')
| -rw-r--r-- | hw/xfree86/xorgconf.cpp | 626 |
1 files changed, 626 insertions, 0 deletions
diff --git a/hw/xfree86/xorgconf.cpp b/hw/xfree86/xorgconf.cpp new file mode 100644 index 000000000..c94c1e5a4 --- /dev/null +++ b/hw/xfree86/xorgconf.cpp @@ -0,0 +1,626 @@ +XCOMM $XdotOrg$ +XCOMM +XCOMM Copyright (c) 1994-1998 by The XFree86 Project, Inc. +XCOMM +XCOMM Permission is hereby granted, free of charge, to any person obtaining a +XCOMM copy of this software and associated documentation files (the "Software"), +XCOMM to deal in the Software without restriction, including without limitation +XCOMM the rights to use, copy, modify, merge, publish, distribute, sublicense, +XCOMM and/or sell copies of the Software, and to permit persons to whom the +XCOMM Software is furnished to do so, subject to the following conditions: +XCOMM +XCOMM The above copyright notice and this permission notice shall be included in +XCOMM all copies or substantial portions of the Software. +XCOMM +XCOMM THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +XCOMM IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +XCOMM FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +XCOMM THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +XCOMM WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF +XCOMM OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +XCOMM SOFTWARE. +XCOMM +XCOMM Except as contained in this notice, the name of the XFree86 Project shall +XCOMM not be used in advertising or otherwise to promote the sale, use or other +XCOMM dealings in this Software without prior written authorization from the +XCOMM XFree86 Project. +XCOMM +XCOMM $XConsortium: XF86Conf.cpp /main/22 1996/10/23 11:43:51 kaleb $ + +XCOMM ********************************************************************** +XCOMM This is a sample configuration file only, intended to illustrate +XCOMM what a config file might look like. Refer to the XF86Config(4/5) +XCOMM man page for details about the format of this file. This man page +XCOMM is installed as MANPAGE +XCOMM ********************************************************************** + +XCOMM The ordering of sections is not important in version 4.0 and later. + +XCOMM ********************************************************************** +XCOMM Files section. This allows default font and rgb paths to be set +XCOMM ********************************************************************** + +Section "Files" + +XCOMM The location of the RGB database. Note, this is the name of the +XCOMM file minus the extension (like ".txt" or ".db"). There is normally +XCOMM no need to change the default. + + RgbPath RGBPATH + +XCOMM Multiple FontPath entries are allowed (which are concatenated together), +XCOMM as well as specifying multiple comma-separated entries in one FontPath +XCOMM command (or a combination of both methods) + + FontPath LOCALFONTPATH + FontPath MISCFONTPATH + FontPath DPI75USFONTPATH + FontPath DPI100USFONTPATH + FontPath T1FONTPATH + FontPath TRUETYPEFONTPATH + FontPath CIDFONTPATH + FontPath SPFONTPATH + FontPath DPI75FONTPATH + FontPath DPI100FONTPATH + +XCOMM ModulePath can be used to set a search path for the X server modules. +XCOMM The default path is shown here. + +XCOMM ModulePath MODULEPATH + +EndSection + +XCOMM ********************************************************************** +XCOMM Module section -- this is an optional section which is used to specify +XCOMM which run-time loadable modules to load when the X server starts up. +XCOMM ********************************************************************** + +Section "Module" + +XCOMM This loads the DBE extension module. + + Load "dbe" + +XCOMM This loads the miscellaneous extensions module, and disables +XCOMM initialisation of the XFree86-DGA extension within that module. + + SubSection "extmod" + Option "omit xfree86-dga" + EndSubSection + +XCOMM This loads the Type1 and FreeType font modules + + Load "type1" + Load "freetype" + +EndSection + + +XCOMM ********************************************************************** +XCOMM Server flags section. This contains various server-wide Options. +XCOMM ********************************************************************** + +Section "ServerFlags" + +XCOMM Uncomment this to cause a core dump at the spot where a signal is +XCOMM received. This may leave the console in an unusable state, but may +XCOMM provide a better stack trace in the core dump to aid in debugging + +XCOMM Option "NoTrapSignals" + +XCOMM Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence +XCOMM (where n is 1 through 12). This allows clients to receive these key +XCOMM events. + +XCOMM Option "DontVTSwitch" + +XCOMM Uncomment this to disable the <Crtl><Alt><BS> server abort sequence +XCOMM This allows clients to receive this key event. + +XCOMM Option "DontZap" + +XCOMM Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching +XCOMM sequences. This allows clients to receive these key events. + +XCOMM Option "DontZoom" + +XCOMM Uncomment this to disable tuning with the xvidtune client. With +XCOMM it the client can still run and fetch card and monitor attributes, +XCOMM but it will not be allowed to change them. If it tries it will +XCOMM receive a protocol error. + +XCOMM Option "DisableVidModeExtension" + +XCOMM Uncomment this to enable the use of a non-local xvidtune client. + +XCOMM Option "AllowNonLocalXvidtune" + +XCOMM Uncomment this to disable dynamically modifying the input device +XCOMM (mouse and keyboard) settings. + +XCOMM Option "DisableModInDev" + +XCOMM Uncomment this to enable the use of a non-local client to +XCOMM change the keyboard or mouse settings (currently only xset). + +XCOMM Option "AllowNonLocalModInDev" + +XCOMM Set the basic blanking screen saver timeout. + + Option "blank time" "10" # 10 minutes + +XCOMM Set the DPMS timeouts. These are set here because they are global +XCOMM rather than screen-specific. These settings alone don't enable DPMS. +XCOMM It is enabled per-screen (or per-monitor), and even then only when +XCOMM the driver supports it. + + Option "standby time" "20" + Option "suspend time" "30" + Option "off time" "60" + +XCOMM On some platform the server needs to estimate the sizes of PCI +XCOMM memory and pio ranges. This is done by assuming that PCI ranges +XCOMM don't overlap. Some broken BIOSes tend to set ranges of inactive +XCOMM devices wrong. Here one can adjust how aggressive the assumptions +XCOMM should be. Default is 0. + +XCOMM Option "EstimateSizesAggresively" "0" + +EndSection + +XCOMM ********************************************************************** +XCOMM Input devices +XCOMM ********************************************************************** + +XCOMM ********************************************************************** +XCOMM Core keyboard's InputDevice section +XCOMM ********************************************************************** + +Section "InputDevice" + + Identifier "Keyboard1" + Driver "keyboard" + +XCOMM For most OSs the protocol can be omitted (it defaults to "Standard"). +XCOMM When using XQUEUE (only for SVR3 and SVR4, but not Solaris), comment +XCOMM out the above line, and uncomment the following line. + +XCOMM Option "Protocol" "Xqueue" + +XCOMM Set the keyboard auto repeat parameters. Not all platforms implement +XCOMM this. + + Option "AutoRepeat" "500 5" + +XCOMM Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)). + +XCOMM Option "Xleds" "1 2 3" + +XCOMM To disable the XKEYBOARD extension, uncomment XkbDisable. + +XCOMM Option "XkbDisable" + +XCOMM To customise the XKB settings to suit your keyboard, modify the +XCOMM lines below (which are the defaults). For example, for a European +XCOMM keyboard, you will probably want to use one of: +XCOMM +XCOMM Option "XkbModel" "pc102" +XCOMM Option "XkbModel" "pc105" +XCOMM +XCOMM If you have a Microsoft Natural keyboard, you can use: +XCOMM +XCOMM Option "XkbModel" "microsoft" +XCOMM +XCOMM If you have a US "windows" keyboard you will want: +XCOMM +XCOMM Option "XkbModel" "pc104" +XCOMM +XCOMM Then to change the language, change the Layout setting. +XCOMM For example, a german layout can be obtained with: +XCOMM +XCOMM Option "XkbLayout" "de" +XCOMM +XCOMM or: +XCOMM +XCOMM Option "XkbLayout" "de" +XCOMM Option "XkbVariant" "nodeadkeys" +XCOMM +XCOMM If you'd like to switch the positions of your capslock and +XCOMM control keys, use: +XCOMM +XCOMM Option "XkbOptions" "ctrl:swapcaps" + + +XCOMM These are the default XKB settings for xorg +XCOMM +XCOMM Option "XkbRules" "xorg" +XCOMM Option "XkbModel" "pc101" +XCOMM Option "XkbLayout" "us" +XCOMM Option "XkbVariant" "" +XCOMM Option "XkbOptions" "" + +EndSection + + +XCOMM ********************************************************************** +XCOMM Core Pointer's InputDevice section +XCOMM ********************************************************************** + +Section "InputDevice" + +XCOMM Identifier and driver + + Identifier "Mouse1" + Driver "mouse" + +XCOMM The mouse protocol and device. The device is normally set to /dev/mouse, +XCOMM which is usually a symbolic link to the real device. + + Option "Protocol" "Microsoft" + Option "Device" "/dev/mouse" + +XCOMM On platforms where PnP mouse detection is supported the following +XCOMM protocol setting can be used when using a newer PnP mouse: + +XCOMM Option "Protocol" "Auto" + +XCOMM When using mouse connected to a PS/2 port (aka "MousePort"), set the +XCOMM the protocol as follows. On some platforms some other settings may +XCOMM be available. + +XCOMM Option "Protocol" "PS/2" + +XCOMM When using XQUEUE (only for SVR3 and SVR4, but not Solaris), use +XCOMM the following instead of any of the lines above. The Device line +XCOMM is not required in this case. + +XCOMM Option "Protocol" "Xqueue" + +XCOMM Baudrate and SampleRate are only for some older Logitech mice. In +XCOMM almost every case these lines should be omitted. + +XCOMM Option "BaudRate" "9600" +XCOMM Option "SampleRate" "150" + +XCOMM Emulate3Buttons is an option for 2-button mice +XCOMM Emulate3Timeout is the timeout in milliseconds (default is 50ms) + +XCOMM Option "Emulate3Buttons" +XCOMM Option "Emulate3Timeout" "50" + +XCOMM ChordMiddle is an option for some 3-button Logitech mice, or any +XCOMM 3-button mouse where the middle button generates left+right button +XCOMM events. + +XCOMM Option "ChordMiddle" + +EndSection + +Section "InputDevice" + Identifier "Mouse2" + Driver "mouse" + Option "Protocol" "MouseMan" + Option "Device" "/dev/mouse2" +EndSection + +XCOMM Some examples of extended input devices + +XCOMM Section "InputDevice" +XCOMM Identifier "spaceball" +XCOMM Driver "magellan" +XCOMM Option "Device" "/dev/cua0" +XCOMM EndSection +XCOMM +XCOMM Section "InputDevice" +XCOMM Identifier "spaceball2" +XCOMM Driver "spaceorb" +XCOMM Option "Device" "/dev/cua0" +XCOMM EndSection +XCOMM +XCOMM Section "InputDevice" +XCOMM Identifier "touchscreen0" +XCOMM Driver "microtouch" +XCOMM Option "Device" "/dev/ttyS0" +XCOMM Option "MinX" "1412" +XCOMM Option "MaxX" "15184" +XCOMM Option "MinY" "15372" +XCOMM Option "MaxY" "1230" +XCOMM Option "ScreenNumber" "0" +XCOMM Option "ReportingMode" "Scaled" +XCOMM Option "ButtonNumber" "1" +XCOMM Option "SendCoreEvents" +XCOMM EndSection +XCOMM +XCOMM Section "InputDevice" +XCOMM Identifier "touchscreen1" +XCOMM Driver "elo2300" +XCOMM Option "Device" "/dev/ttyS0" +XCOMM Option "MinX" "231" +XCOMM Option "MaxX" "3868" +XCOMM Option "MinY" "3858" +XCOMM Option "MaxY" "272" +XCOMM Option "ScreenNumber" "0" +XCOMM Option "ReportingMode" "Scaled" +XCOMM Option "ButtonThreshold" "17" +XCOMM Option "ButtonNumber" "1" +XCOMM Option "SendCoreEvents" +XCOMM EndSection + +XCOMM ********************************************************************** +XCOMM Monitor section +XCOMM ********************************************************************** + +XCOMM Any number of monitor sections may be present + +Section "Monitor" + +XCOMM The identifier line must be present. + + Identifier "Generic Monitor" + +XCOMM HorizSync is in kHz unless units are specified. +XCOMM HorizSync may be a comma separated list of discrete values, or a +XCOMM comma separated list of ranges of values. +XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S +XCOMM USER MANUAL FOR THE CORRECT NUMBERS. + +XCOMM HorizSync 31.5 # typical for a single frequency fixed-sync monitor +XCOMM HorizSync 30-64 # multisync +XCOMM HorizSync 31.5, 35.2 # multiple fixed sync frequencies +XCOMM HorizSync 15-25, 30-50 # multiple ranges of sync frequencies + +XCOMM VertRefresh is in Hz unless units are specified. +XCOMM VertRefresh may be a comma separated list of discrete values, or a +XCOMM comma separated list of ranges of values. +XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S +XCOMM USER MANUAL FOR THE CORRECT NUMBERS. + +XCOMM VertRefresh 60 # typical for a single frequency fixed-sync monitor + +XCOMM VertRefresh 50-100 # multisync +XCOMM VertRefresh 60, 65 # multiple fixed sync frequencies +XCOMM VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies + +XCOMM Modes can be specified in two formats. A compact one-line format, or +XCOMM a multi-line format. + +XCOMM A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz) +XCOMM These two are equivalent + +XCOMM ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525 + + Mode "640x480" + DotClock 25.175 + HTimings 640 664 760 800 + VTimings 480 491 493 525 + EndMode + +XCOMM These two are equivalent + +XCOMM ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace + +XCOMM Mode "1024x768i" +XCOMM DotClock 45 +XCOMM HTimings 1024 1048 1208 1264 +XCOMM VTimings 768 776 784 817 +XCOMM Flags "Interlace" +XCOMM EndMode + +XCOMM If a monitor has DPMS support, that can be indicated here. This will +XCOMM enable DPMS when the monitor is used with drivers that support it. + +XCOMM Option "dpms" + +XCOMM If a monitor requires that the sync signals be superimposed on the +XCOMM green signal, the following option will enable this when used with +XCOMM drivers that support it. Only a relatively small range of hardware +XCOMM (and drivers) actually support this. + +XCOMM Option "sync on green" + +EndSection + +XCOMM ********************************************************************** +XCOMM Graphics device section +XCOMM ********************************************************************** + +XCOMM Any number of graphics device sections may be present + +Section "Device" + +XCOMM The Identifier must be present. + + Identifier "Generic VGA" + +XCOMM The Driver line must be present. When using run-time loadable driver +XCOMM modules, this line instructs the server to load the specified driver +XCOMM module. Even when not using loadable driver modules, this line +XCOMM indicates which driver should interpret the information in this section. + + Driver "vga" + +XCOMM The chipset line is optional in most cases. It can be used to override +XCOMM the driver's chipset detection, and should not normally be specified. + +XCOMM Chipset "generic" + +XCOMM Various other lines can be specified to override the driver's automatic +XCOMM detection code. In most cases they are not needed. + +XCOMM VideoRam 256 +XCOMM Clocks 25.2 28.3 + +XCOMM The BusID line is used to specify which of possibly multiple devices +XCOMM this section is intended for. When this line isn't present, a device +XCOMM section can only match up with the primary video device. For PCI +XCOMM devices a line like the following could be used. This line should not +XCOMM normally be included unless there is more than one video device +XCOMM intalled. + +XCOMM BusID "PCI:0:10:0" + +XCOMM Various option lines can be added here as required. Some options +XCOMM are more appropriate in Screen sections, Display subsections or even +XCOMM Monitor sections. + +XCOMM Option "hw cursor" "off" + +EndSection + +Section "Device" + Identifier "any supported Trident chip" + Driver "trident" +EndSection + +Section "Device" + Identifier "MGA Millennium I" + Driver "mga" + Option "hw cursor" "off" + BusID "PCI:0:10:0" +EndSection + +Section "Device" + Identifier "MGA G200 AGP" + Driver "mga" + BusID "PCI:1:0:0" + Option "pci retry" +EndSection + + +XCOMM ********************************************************************** +XCOMM Screen sections. +XCOMM ********************************************************************** + +XCOMM Any number of screen sections may be present. Each describes +XCOMM the configuration of a single screen. A single specific screen section +XCOMM may be specified from the X server command line with the "-screen" +XCOMM option. + +Section "Screen" + +XCOMM The Identifier, Device and Monitor lines must be present + + Identifier "Screen 1" + Device "Generic VGA" + Monitor "Generic Monitor" + +XCOMM The favoured Depth and/or Bpp may be specified here + + DefaultDepth 8 + + SubSection "Display" + Depth 8 + Modes "640x480" + ViewPort 0 0 + Virtual 800 600 + EndSubsection + + SubSection "Display" + Depth 4 + Modes "640x480" + EndSubSection + + SubSection "Display" + Depth 1 + Modes "640x480" + EndSubSection + +EndSection + + +Section "Screen" + Identifier "Screen MGA1" + Device "MGA Millennium I" + Monitor "Generic Monitor" + Option "no accel" + DefaultDepth 16 +XCOMM DefaultDepth 24 + + SubSection "Display" + Depth 8 + Modes "1280x1024" + Option "rgb bits" "8" + Visual "StaticColor" + EndSubSection + SubSection "Display" + Depth 16 + Modes "1280x1024" + EndSubSection + SubSection "Display" + Depth 24 + Modes "1280x1024" + EndSubSection +EndSection + + +Section "Screen" + Identifier "Screen MGA2" + Device "MGA G200 AGP" + Monitor "Generic Monitor" + DefaultDepth 8 + + SubSection "Display" + Depth 8 + Modes "1280x1024" + Option "rgb bits" "8" + Visual "StaticColor" + EndSubSection +EndSection + + +XCOMM ********************************************************************** +XCOMM ServerLayout sections. +XCOMM ********************************************************************** + +XCOMM Any number of ServerLayout sections may be present. Each describes +XCOMM the way multiple screens are organised. A specific ServerLayout +XCOMM section may be specified from the X server command line with the +XCOMM "-layout" option. In the absence of this, the first section is used. +XCOMM When now ServerLayout section is present, the first Screen section +XCOMM is used alone. + +Section "ServerLayout" + +XCOMM The Identifier line must be present + + Identifier "Main Layout" + +XCOMM Each Screen line specifies a Screen section name, and optionally +XCOMM the relative position of other screens. The four names after +XCOMM primary screen name are the screens to the top, bottom, left and right +XCOMM of the primary screen. In this example, screen 2 is located to the +XCOMM right of screen 1. + + Screen "Screen MGA 1" "" "" "" "Screen MGA 2" + Screen "Screen MGA 2" "" "" "Screen MGA 1" "" + +XCOMM Each InputDevice line specifies an InputDevice section name and +XCOMM optionally some options to specify the way the device is to be +XCOMM used. Those options include "CorePointer", "CoreKeyboard" and +XCOMM "SendCoreEvents". In this example, "Mouse1" is the core pointer, +XCOMM and "Mouse2" is an extended input device that also generates core +XCOMM pointer events (i.e., both mice will move the standard pointer). + + InputDevice "Mouse1" "CorePointer" + InputDevice "Mouse2" "SendCoreEvents" + InputDevice "Keyboard1" "CoreKeyboard" + +EndSection + + +Section "ServerLayout" + Identifier "another layout" + Screen "Screen 1" + Screen "Screen MGA 1" + InputDevice "Mouse1" "CorePointer" + InputDevice "Keyboard1" "CoreKeyboard" +EndSection + + +Section "ServerLayout" + Identifier "simple layout" + Screen "Screen 1" + InputDevice "Mouse1" "CorePointer" + InputDevice "Keyboard1" "CoreKeyboard" +EndSection + |