diff options
Diffstat (limited to 'hw/xfree86/utils/pcitweak/pcitweak.man.pre')
-rw-r--r-- | hw/xfree86/utils/pcitweak/pcitweak.man.pre | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/hw/xfree86/utils/pcitweak/pcitweak.man.pre b/hw/xfree86/utils/pcitweak/pcitweak.man.pre new file mode 100644 index 000000000..f4bd8d405 --- /dev/null +++ b/hw/xfree86/utils/pcitweak/pcitweak.man.pre @@ -0,0 +1,64 @@ +.\" $XFree86: xc/programs/Xserver/hw/xfree86/etc/pcitweak.man,v 3.3 2001/01/27 18:20:56 dawes Exp $ +.TH PCITWEAK 1 __vendorversion__ +.SH NAME +pcitweak - read/write PCI config space +.SH SYNOPSIS +.B pcitweak +.B \-l +.br +.B pcitweak +.B \-r +.I PCI-ID +.RB [ \-b | \-h ] +.I offset +.br +.B pcitweak +.B \-w +.I PCI-ID +.RB [ \-b | \-h ] +.I offset +.I value +.SH DESCRIPTION +.I Pcitweak +is a utility that can be used to examine or change registers in the PCI +configuration space. On most platfoms +.I pcitweak +can only be run by the root user. +.SH OPTIONS +.TP 8 +.B \-l +Probe the PCI buses and print a line for each detected device. Each line +contains the bus location (bus:device:function), chip vendor/device, card +(subsystem) vendor/card, revision, class and header type. All values +printed are in hexadecimal. +.TP 8 +.BI "\-r " PCI-ID +Read the PCI configuration space register at +.I offset +for the PCI device at bus location +.IR PCI-ID . +.I PCI-ID +should be given in the form bus:device:function, with each value in +hexadecimal. By default, a 32-bit register is read. +.TP 8 +.BI "\-w " PCI-ID +Write +.I value +to the PCI configuration space register at +.I offset +for the PCI device at bus location +.IR PCI-ID . +.I PCI-ID +should be given in the form bus:device:function, with each value in +hexadecimal. By default, a 32-bit register is written. +.TP 8 +.B \-b +Read or write an 8-bit value (byte). +.TP 8 +.B \-h +Read or write a 16-bit value (halfword). +.SH "SEE ALSO" +scanpci(1) +.SH AUTHORS +David Dawes +.RI ( dawes@xfree86.org ). |