/* $Xorg: token.c,v 1.4 2000/08/17 19:46:34 cpqbld Exp $ */ /* Copyright International Business Machines,Corp. 1991 * All Rights Reserved * * License to use, copy, modify, and distribute this software * and its documentation for any purpose and without fee is * hereby granted, provided that the above copyright notice * appear in all copies and that both that copyright notice and * this permission notice appear in supporting documentation, * and that the name of IBM not be used in advertising or * publicity pertaining to distribution of the software without * specific, written prior permission. * * IBM PROVIDES THIS SOFTWARE "AS IS", WITHOUT ANY WARRANTIES * OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT * LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT OF * THIRD PARTY RIGHTS. THE ENTIRE RISK AS TO THE QUALITY AND * PERFORMANCE OF THE SOFTWARE, INCLUDING ANY DUTY TO SUPPORT * OR MAINTAIN, BELONGS TO THE LICENSEE. SHOULD ANY PORTION OF * THE SOFTWARE PROVE DEFECTIVE, THE LICENSEE (NOT IBM) ASSUMES * THE ENTIRE COST OF ALL SERVICING, REPAIR AND CORRECTION. IN * NO EVENT SHALL IBM BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING * FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF * CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS * SOFTWARE. */ /* $XFree86: xc/lib/font/Type1/token.c,v 1.5tsi Exp $ */ /* Authors: Sig Nin & Carol Thompson IBM Almaden Research Laboratory */ #ifdef HAVE_CONFIG_H #include #endif #include "t1stdio.h" #include "util.h" #include "digit.h" #include "token.h" #include "tokst.h" #include "hdigit.h" /* * ------------------------------------------------------------------- * Globals * ------------------------------------------------------------------- */ /* These variables are set by the caller */ char *tokenStartP; /* Pointer to token buffer in VM */ char *tokenMaxP; /* Pointer to last byte in buffer + 1 */ /* These variables are set by TOKEN */ int tokenLength; /* Characters in token */ boolean tokenTooLong; /* Token too long for buffer */ int tokenType; /* Type of token identified */ psvalue tokenValue; /* Token value */ /* * ------------------------------------------------------------------- * Private variables * ------------------------------------------------------------------- */ static FILE *inputFileP; /* Current input file */ /* Token */ static char *tokenCharP; /* Pointer to next character in token */ /* * ------------------------------------------------------------------- * Private routines for manipulating numbers * ------------------------------------------------------------------- */ #define Exp10(e) \ ((e) == 0\ ? (double)(1.0)\ : (-64 <= (e) && (e) <= 63\ ? Exp10T[(e)+64]\ : P10(e)\ )\ ) static double Exp10T[128] = { 1e-64, 1e-63, 1e-62, 1e-61, 1e-60, 1e-59, 1e-58, 1e-57, 1e-56, 1e-55, 1e-54, 1e-53, 1e-52, 1e-51, 1e-50, 1e-49, 1e-48, 1e-47, 1e-46, 1e-45, 1e-44, 1e-43, 1e-42, 1e-41, 1e-40, 1e-39, 1e-38, 1e-37, 1e-36, 1e-35, 1e-34, 1e-33, 1e-32, 1e-31, 1e-30, 1e-29, 1e-28, 1e-27, 1e-26, 1e-25, 1e-24, 1e-23, 1e-22, 1e-21, 1e-20, 1e-19, 1e-18, 1e-17, 1e-16, 1e-15, 1e-14, 1e-13, 1e-12, 1e-11, 1e-10, 1e-9, 1e-8, 1e-7, 1e-6, 1e-5, 1e-4, 1e-3, 1e-2, 1e-1, 1e0, 1e1, 1e2, 1e3, 1e4, 1e5, 1e6, 1e7, 1e8, 1e9, 1e10, 1e11, 1e12, 1e13, 1e14, 1e15, 1e16, 1e17, 1e18, 1e19, 1e20, 1e21, 1e22, 1e23, 1e24, 1e25, 1e26, 1e27, 1e28, 1e29, 1e30, 1e31, 1e32, 1e33, 1e34, 1e35, 1e36, 1e37, 1e38, 1e39, 1e40, 1e41, 1e42, 1e43, 1e44, 1e45, 1e46, 1e47, 1e48, 1e49, 1e50, 1e51, 1e52, 1e53, 1e54, 1e55, 1e56, 1e57, 1e58, 1e59, 1e60, 1e61, 1e62, 1e63 }; static double P10(long exponent) { double value, power; if (exponent < 0) { power = 0.1; value = (exponent & 1 ? power : 1.0); exponent++; exponent = -(exponent >> 1); /* portable C for -(exponent/2) */ } else { power = 10.0; value = (exponent & 1 ? power : 1.0); exponent = exponent >> 1; } while(exponent > 0) { power *= power; if (exponent & 1) value *= power; exponent >>= 1; } return(value); } /* * ------------------------------------------------------------------- * Private routines and macros for manipulating the input * ------------------------------------------------------------------- */ /* Get next character from the input -- * */ #define next_ch() (_XT1getc(inputFileP)) /* Push a character back into the input -- * * Ungetc of EOF will fail, but that's ok: the next getc will * return EOF. * * NOTE: These macros are presently written to return the character * pushed, or EOF if none was pushed. However, they are not * required to return anything in particular, and callers should * not rely on the returned value. */ #define back_ch(ch) (T1Ungetc(ch, inputFileP)) /* Push a character back into the input if it was not white space. * If it is a carriage return (\r) then check next char for * linefeed and consume them both, otherwise put next char back. * */ #define back_ch_not_white(ch) \ (\ isWHITE_SPACE(ch)\ ? ((ch == '\r')\ ? (((ch = next_ch()) == '\n')\ ? EOF\ : back_ch(ch)\ )\ : EOF\ )\ : back_ch(ch)\ ) /* * ------------------------------------------------------------------- * Private routines and macros for manipulating the token buffer * ------------------------------------------------------------------- */ /* Add a character to the token * ---- use ONLY when you KNOW that this character will * be stored within the token buffer. */ #define save_unsafe_ch(ch) (*tokenCharP++ = ch) /* Add a character to the token, if not too long to fit */ #define save_ch(ch) \ ((tokenCharP < tokenMaxP)\ ? save_unsafe_ch(ch)\ : (tokenTooLong = TRUE)\ ) #define save_ch_no_inc(ch) \ if (tokenCharP < tokenMaxP) *tokenCharP = ch /* * ------------------------------------------------------------------- * Action Routines * * These routines all * -- take int ch as a parameter * -- return int ch if no token was recognized, DONE otherwise * -- leave the next character in the input, if returning DONE * ------------------------------------------------------------------- */ #define DONE (256) /* Get the next input character */ static int next_char(int ch) { return(next_ch()); } /* Add character to token */ static int add_char(int ch) { save_ch(ch); return(next_ch()); } /* ------------------------------------------------------------------- * Skip white space and comments */ /* Skip white space */ static int skip_space(int ch) { do { ch = next_ch(); } while(isWHITE_SPACE(ch)); return(ch); } /* Skip comments */ static int skip_comment(int ch) { do { ch = next_ch(); } while(isCOMMENT(ch)); return(ch); } /* ------------------------------------------------------------------- * Collect value elements for a number */ /* decimal integer or real number mantissa */ static int m_sign; static long m_value; static long m_scale; /* real number exponent */ static int e_sign; static long e_value; /* radix number */ static long r_base; static long r_value; static long r_scale; static int add_sign(int ch) { m_sign = ch; save_unsafe_ch(ch); return(next_ch()); } static int add_1st_digits(int ch) { m_sign = '+'; return(add_digits(ch)); } static int add_digits(int ch) { long value, p_value, scale; int digit; /* On entry, expect m_sign to be set to '+' or '-'; * ch is a decimal digit. * Expect at most one character saved at this point, * a sign. This routine will save up to 10 more * characters without checking the buffer boundary. */ value = ch - '0'; save_unsafe_ch(ch); ch = next_ch(); while(isDECIMAL_DIGIT(ch) && value < (MAX_INTEGER/10)) { value = (value << 3) + (value << 1) + (ch - '0'); save_unsafe_ch(ch); ch = next_ch(); } /* Quick exit for small integers -- * |x| <= 10*((MAX_INTEGER/10)-1)+9 * |x| <= 2,147,483,639 for 32 bit integers */ if (isNUMBER_ENDER(ch)) { back_ch_not_white(ch); tokenValue.integer = (m_sign == '-' ? -value : value); tokenType = TOKEN_INTEGER; return(DONE); } /* Handle additional digits. Beyond the boundary case, * 10*(MAX_INTEGER/10) <= |number| <= MAX_INTEGER * just count the digits: the number is too large to * represent as an integer and will be returned as a real. * The mantissa of a real holds fewer bits than an integer. */ p_value = value; value = (m_sign == '-' ? -value : value); scale = 0; if (isDECIMAL_DIGIT(ch)) { /* Handle the boundary case */ if (p_value == (MAX_INTEGER/10)) { digit = ch - '0'; /* Must handle positive and negative values separately */ /* for 2's complement arithmetic */ if (value > 0) { if (digit <= MAX_INTEGER%10) value = (value << 3) + (value << 1) + digit; else ++scale; /* Too big, just count it */ } else { /* Use positive % operands for portability */ if (digit <= -(MIN_INTEGER+10)%10) value = (value << 3) + (value << 1) - digit; else ++scale; /* Too big, just count it */ } } else ++scale; /* Not boundary case, just count digit */ save_unsafe_ch(ch); ch = next_ch(); /* Continue scanning digits, but can't store them */ while(isDECIMAL_DIGIT(ch)) { ++scale; save_ch(ch); ch = next_ch(); } } /* Continue from here scanning radix integer or real */ m_value = value; m_scale = scale; /* Initialize for possible real */ e_sign = '+'; e_value = 0; return(ch); } static int add_1st_decpt(int ch) { m_sign = '+'; return(add_decpt(ch)); } static int add_decpt(int ch) { /* On entry, expect m_sign to be set to '+' or '-' */ m_value = 0; m_scale = 0; save_unsafe_ch(ch); return(next_ch()); } static int add_fraction(int ch) { long value, scale; int digit; /* On entry, expect m_value and m_scale to be initialized, * and m_sign to be set to '+' or '-'. Expect m_value and m_sign * to be consistent (this is not checked). */ value = m_value; scale = m_scale; /* Scan leading zeroes */ if (value == 0) { while(ch == '0') { --scale; save_ch(ch); ch = next_ch(); } /* Scan first significant digit */ if (isDECIMAL_DIGIT(ch)) { --scale; value = ch - '0'; value = (m_sign == '-' ? -value : value); save_ch(ch); ch = next_ch(); } else /* no significant digits -- number is zero */ scale = 0; } /* value != 0 || value == 0 && !isDECIMAL_DIGIT(ch) */ /* Scan additional significant digits */ if (isDECIMAL_DIGIT(ch)) { if (value > 0) { while(isDECIMAL_DIGIT(ch) && value < (MAX_INTEGER/10)) { --scale; value = (value << 3) + (value << 1) + (ch - '0'); save_ch(ch); ch = next_ch(); } /* Check boundary case */ if (isDECIMAL_DIGIT(ch) && value == (MAX_INTEGER/10)) { digit = ch - '0'; if (digit <= MAX_INTEGER%10) { --scale; value = (value << 3) + (value << 1) + digit; save_ch(ch); ch = next_ch(); } } } else { /* value < 0 */ while(isDECIMAL_DIGIT(ch) && value > -(-(MIN_INTEGER+10)/10+1)) { /* Use positive / operands for portability */ --scale; value = (value << 3) + (value << 1) - (ch - '0'); save_ch(ch); ch = next_ch(); } /* Check boundary case */ if (isDECIMAL_DIGIT(ch) && value == -(-(MIN_INTEGER+10)/10+1)) { digit = ch - '0'; if (digit <= -(MIN_INTEGER+10)%10) { /* Use positive % operands for portability */ --scale; value = (value << 3) + (value << 1) - digit; save_ch(ch); ch = next_ch(); } } } /* Additional digits can be discarded */ while(isDECIMAL_DIGIT(ch)) { save_ch(ch); ch = next_ch(); } } /* Store results */ m_value = value; m_scale = scale; /* Initialize for possible real */ e_sign = '+'; e_value = 0; return(ch); } static int add_e_sign(int ch) { e_sign = ch; save_ch(ch); return(next_ch()); } static int add_exponent(int ch) { long value, p_value; long scale = 0; int digit; /* On entry, expect e_sign to be set to '+' or '-' */ value = ch - '0'; save_ch(ch); ch = next_ch(); while(isDECIMAL_DIGIT(ch) && value < (MAX_INTEGER/10)) { value = (value << 3) + (value << 1) + (ch - '0'); save_ch(ch); ch = next_ch(); } p_value = value; value = (e_sign == '-' ? -value : value); /* Handle additional digits. Beyond the boundary case, * 10*(MAX_INTEGER/10) <= |number| <= MAX_INTEGER * just count the digits: the number is too large to * represent as an integer. */ if (isDECIMAL_DIGIT(ch)) { /* Examine boundary case */ if (p_value == (MAX_INTEGER/10)) { digit = ch - '0'; /* Must handle positive and negative values separately */ /* for 2's complement arithmetic */ if (value > 0) { if (digit <= MAX_INTEGER%10) value = (value << 3) + (value << 1) + digit; else ++scale; /* Too big, just count it */ } else { /* Use positive % operands for portability */ if (digit <= -(MIN_INTEGER+10)%10) value = (value << 3) + (value << 1) - digit; else ++scale; /* Too big, just count it */ } } else ++scale; /* Not boundary case, just count digit */ save_ch(ch); ch = next_ch(); /* Continue scanning digits, but can't store any more */ while(isDECIMAL_DIGIT(ch)) { ++scale; save_ch(ch); ch = next_ch(); } } /* Store results */ e_value = value; return(ch); } static int add_radix(int ch) { if (2 <= m_value && m_value <= 36 && m_scale == 0) { r_base = m_value; save_ch(ch); return(next_ch()); } else { /* Radix invalid, complete a name token */ return(AAH_NAME(ch)); } } static int add_r_digits(int ch) { unsigned long value; long radix, scale; int digit; /* NOTE: The syntax of a radix number allows only for * values of zero or more. The value will be stored as * a 32 bit integer, which PostScript then interprets * as signed. This means, for example, that the numbers: * * 8#37777777777 * 10#4294967295 * 16#FFFFFFFF * 36#1Z141Z3 * * are all interpreted as -1. This routine implements this * idea explicitly: it accumulates the number's value * as unsigned, then casts it to signed when done. */ /* Expect r_base to be initialized */ radix = r_base; value = 0; scale = 0; /* Scan leading zeroes */ while(ch == '0') { save_ch(ch); ch = next_ch(); } /* Handle first non-zero digit */ if ((digit=digit_value[ch]) < radix) { value = digit; save_ch(ch); ch = next_ch(); /* Add digits until boundary case reached */ while((digit=digit_value[ch]) < radix && value < (MAX_ULONG / radix)) { value = value * radix + digit; save_ch(ch); ch = next_ch(); }; /* Scan remaining digits */ if ((digit=digit_value[ch]) < radix) { /* Examine boundary case --- * radix*(MAX_ULONG/radix) <= number <= MAX_ULONG */ if (value == (MAX_ULONG/radix) && digit <= MAX_ULONG%radix) value = value * radix + digit; else ++scale; /* Continue scanning digits, but can't store them */ save_ch(ch); ch = next_ch(); while(digit_value[ch] < radix) { ++scale; save_ch(ch); ch = next_ch(); } } } /* Store result */ r_value = (long) value; /* result is signed */ r_scale = scale; return(ch); } /* ------------------------------------------------------------------- * Complete a number; set token type and done flag. * Put current input character back, if it is not white space. */ /* Done: Radix Number */ static int RADIX_NUMBER(int ch) { back_ch_not_white(ch); if (r_scale == 0) { tokenValue.integer = r_value; tokenType = TOKEN_INTEGER; } else { tokenType = TOKEN_NAME; } return(DONE); } /* Done: Integer */ static int INTEGER(int ch) { back_ch_not_white(ch); if (m_scale == 0) { tokenValue.integer = m_value; tokenType = TOKEN_INTEGER; } else { tokenValue.real = (double)(m_value) * Exp10(m_scale); tokenType = TOKEN_REAL; } return(DONE); } /* Done: Real */ static int REAL(int ch) { double temp; back_ch_not_white(ch); /* HAZARD: exponent overflow of intermediate result * (e.g., in 370 floating point); this should not be a problem * with IEEE floating point. Reduce exponent overflow hazard by * combining m_scale and e_value first, if they have different signs, * or multiplying m_value and one of the other factors, if both * m_scale and e_value are negative. */ if ((m_scale >= 0 && e_value <= 0) || (m_scale <= 0 && e_value >= 0)) { tokenValue.real = (double)(m_value) * Exp10(m_scale + e_value); } else { temp = (double)(m_value) * Exp10(m_scale); tokenValue.real = temp * Exp10(e_value); } tokenType = TOKEN_REAL; return(DONE); } /* ------------------------------------------------------------------- * Assemble a hex string; set token type and done flag. */ /* Done: Hex String */ static int HEX_STRING(int ch) { int value; while(TRUE) { /* Process odd digit */ ch = next_ch(); if (!isHEX_DIGIT(ch)) { /* Skip white space */ while(isWHITE_SPACE(ch)) ch = next_ch(); /* Check for terminator */ if (!isHEX_DIGIT(ch)) { break; } } value = digit_value[ch] << 4; /* Process even digit */ ch = next_ch(); if (!isHEX_DIGIT(ch)) { /* Skip white space */ while(isWHITE_SPACE(ch)) ch = next_ch(); /* Check for terminator */ if (!isHEX_DIGIT(ch)) { save_ch(value); break; } } save_ch(value + digit_value[ch]); } /* Classify result, based on why loop ended */ if (ch == '>') tokenType = TOKEN_HEX_STRING; else { /* save the invalid character for error reporting */ save_ch(ch); tokenType = TOKEN_INVALID; } return(DONE); } /* ------------------------------------------------------------------- * Assemble a string; set token type and done flag */ /* Save a backslash-coded character in a string -- * * Store the proper character for special cases * "\b", "\f", "\n", "\r", and "\t". * * Decode and store octal-coded character, up to * three octal digits, "\o", "\oo", and "\ooo". * * The sequence "\" is a line continuation, * so consume both without storing anything. * * The sequence "\" is an error; exit without * storing anything and let the caller handle it. * * For other characters, including the sequences * "\\", "\(", and "\)", simply store the second * character. */ static void save_digraph(int ch) { int value; switch (ch) { case 'b': /* backspace */ ch = '\b'; break; case 'f': /* formfeed */ ch = '\f'; break; case 'n': /* newline */ ch = '\n'; break; case 'r': /* carriage return */ ch = '\r'; break; case 't': /* horizontal tab */ ch = '\t'; break; case '\n': /* line continuation -- consume it */ return; case '\r': /* carriage return -- consume it */ ch = next_ch(); /* look at next character, is it \n? */ if (ch == '\n') return; back_ch(ch); /* if not a line feed, then return it */ return; case EOF: /* end of file -- forget it */ return; default: /* scan up to three octal digits to get value */ if (isOCTAL_DIGIT(ch)) { value = digit_value[ch]; ch = next_ch(); if (isOCTAL_DIGIT(ch)) { value = (value << 3) + digit_value[ch]; ch = next_ch(); if (isOCTAL_DIGIT(ch)) value = (value << 3) + digit_value[ch]; else back_ch(ch); } else back_ch(ch); ch = value; } } /* Found a character to save */ save_ch(ch); } /* Done: String */ static int STRING(int ch) { int nest_level = 1; tokenType = TOKEN_STRING; do { ch = next_ch(); while(!isSTRING_SPECIAL(ch)) { save_ch(ch); ch = next_ch(); }; switch (ch) { case '(': ++nest_level; save_ch(ch); break; case ')': if (--nest_level > 0) save_ch(ch); break; case '\\': save_digraph(next_ch()); break; case '\r': /* All carriage returns (\r) are turned into linefeeds (\n)*/ ch = next_ch(); /* get the next one, is it \n? */ if (ch != '\n') { /* if not, then put it back. */ back_ch(ch); } save_ch('\n'); /* in either case, save a linefeed */ break; case EOF: tokenType = TOKEN_INVALID; /* Unterminated string */ nest_level = 0; break; } } while(nest_level > 0); /* If there's room, add a 0-byte termination without increasing string length. This fixes certain dependencies on 0-terminated strings */ save_ch_no_inc(0); return(DONE); } /* ------------------------------------------------------------------- * Assemble a name; set token type and done flag. * Put current input character back, if it is not white space. */ /* Done: Name * (Safe version used to complete name tokens that * start out looking like something else). */ static int AAH_NAME(int ch) { do { save_ch(ch); ch = next_ch(); } while(isNAME(ch)); back_ch_not_white(ch); tokenType = TOKEN_NAME; return(DONE); } /* Done: Name */ static int NAME(int ch) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); while(isNAME(ch)) { save_ch(ch); ch = next_ch(); } } } } } } } back_ch_not_white(ch); tokenType = TOKEN_NAME; return(DONE); } /* Done: Literal Name */ static int LITERAL_NAME(int ch) { if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); while(isNAME(ch)) { save_ch(ch); ch = next_ch(); } } } } } } } back_ch_not_white(ch); tokenType = TOKEN_LITERAL_NAME; return(DONE); } /* Done: immediate Name */ static int IMMED_NAME(int ch) { ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); if (isNAME(ch)) { save_unsafe_ch(ch); ch = next_ch(); while(isNAME(ch)) { save_ch(ch); ch = next_ch(); } } } } } } } back_ch_not_white(ch); tokenType = TOKEN_IMMED_NAME; return(DONE); } /* Done: Name found while looking for something else */ static int OOPS_NAME(int ch) { back_ch_not_white(ch); tokenType = TOKEN_NAME; return(DONE); } /* ------------------------------------------------------------------- * Complete a miscellaneous token; set token type and done flag. */ /* Done: Unmatched Right Angle-Bracket */ static int RIGHT_ANGLE(int ch) { tokenType = TOKEN_RIGHT_ANGLE; return(DONE); } /* Done: Unmatched Right Parenthesis */ static int RIGHT_PAREN(int ch) { tokenType = TOKEN_RIGHT_PAREN; return(DONE); } /* Done: Left Brace */ static int LEFT_BRACE(int ch) { tokenType = TOKEN_LEFT_BRACE; return(DONE); } /* Done: Right Brace */ static int RIGHT_BRACE(int ch) { tokenType = TOKEN_RIGHT_BRACE; return(DONE); } /* Done: Left Bracket */ static int LEFT_BRACKET(int ch) { save_unsafe_ch(ch); tokenType = TOKEN_LEFT_BRACKET; return(DONE); } /* Done: Right Bracket */ static int RIGHT_BRACKET(int ch) { save_unsafe_ch(ch); tokenType = TOKEN_RIGHT_BRACKET; return(DONE); } /* Done: Break */ static int BREAK_SIGNAL(int ch) { tokenType = TOKEN_BREAK; return(DONE); } /* Done: No Token Found */ static int NO_TOKEN(int ch) { tokenType = TOKEN_EOF; return(DONE); } /* * ------------------------------------------------------------------- * scan_token -- scan one token from the input. It uses a simple * finite state machine to recognize token classes. * * The input is from a file. * * On entry -- * * inputP -> input PostScript object, a file. * tokenStartP -> buffer in VM for accumulating the token. * tokenMaxP -> last character in the token buffer * * On exit -- * * tokenLength = number of characters in the token * tokenTooLong = TRUE if the token did not fit in the buffer * tokenType = code for the type of token parsed. * tokenValue = converted value of a numeric token. * * * ------------------------------------------------------------------- */ void scan_token(psobj *inputP) { int ch; unsigned char *stateP = s0; unsigned char entry; int (*actionP)(int); /* Define input source */ inputFileP = inputP->data.fileP; if (inputFileP == NULL) { tokenType = TOKEN_EOF; return; } /* Ensure enough space for most cases * (so we don't have to keep checking) * The length needs to cover the maximum number * of save_unsafe_ch() calls that might be executed. * That number is 11 (a sign and 10 decimal digits, e.g., * when scanning -2147483648), but use MAX_NAME_LEN * in case someone changes that without checking. */ tokenStartP = vm_next_byte(); tokenMaxP = tokenStartP + MIN(vm_free_bytes(), MAX_STRING_LEN); if ((tokenMaxP-tokenStartP) < (MAX_NAME_LEN)) { tokenLength = 0; tokenTooLong = TRUE; tokenType = TOKEN_NONE; tokenValue.integer = 0; return; } /* Reset token */ tokenCharP = tokenStartP; tokenTooLong = FALSE; /* Scan one token */ ch = next_ch(); do { entry = stateP[ch]; stateP = classActionTable[entry].nextStateP; actionP = classActionTable[entry].actionRoutineP; ch = (*actionP)(ch); } while(ch != DONE); /* Return results */ tokenLength = tokenCharP - tokenStartP; }