path: root/src/sis300_accel.c

/* $XFree86$ */
/* $XdotOrg$ */
/*
 * 2D Acceleration for SiS 530, 620, 300, 540, 630, 730.
 *
 * Copyright (C) 2001-2004 by Thomas Winischhofer, Vienna, Austria
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1) Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2) Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3) The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors:   Thomas Winischhofer <thomas@winischhofer.net>
 *	      Can-Ru Yeou, SiS Inc.
 *
 */

#if 0
#define DEBUG
#endif

#include "xf86.h"
#include "xf86_OSproc.h"
#include "xf86_ansic.h"
#include "xf86PciInfo.h"
#include "xf86Pci.h"
#include "compiler.h"
#include "xaa.h"
#include "xaarop.h"

#include "sis.h"
#include "sis300_accel.h"

#ifdef SISDUALHEAD
/* TW: This is the offset to the memory for each head */
#define HEADOFFSET 	(pSiS->dhmOffset)
#endif

#undef STSCE    	/* Use/Don't use ScreenToScreenColorExpand - does not work */

#undef TRAP     	/* Use/Don't use Trapezoid Fills - does not work - XAA provides
		         * illegal trapezoid data (left and right edges cross each other
			 * sometimes) which causes drawing errors. Further, I have not found
			 * out how to draw polygones with a height greater than 127...
                         */

static void SiSInitializeAccelerator(ScrnInfoPtr pScrn);
static void SiSSync(ScrnInfoPtr pScrn);
static void SiSSetupForScreenToScreenCopy(ScrnInfoPtr pScrn,
                                int xdir, int ydir, int rop,
                                unsigned int planemask, int trans_color);
static void SiSSubsequentScreenToScreenCopy(ScrnInfoPtr pScrn,
                                int x1, int y1, int x2, int y2,
                                int width, int height);
static void SiSSetupForSolidFill(ScrnInfoPtr pScrn, int color,
                                int rop, unsigned int planemask);
static void SiSSubsequentSolidFillRect(ScrnInfoPtr pScrn,
                                int x, int y, int w, int h);
#ifdef TRAP
static void SiSSubsequentSolidFillTrap(ScrnInfoPtr pScrn, int y, int h,
	                        int left, int dxL, int dyL, int eL,
	                        int right, int dxR, int dyR, int eR);
#endif
static void SiSSetupForSolidLine(ScrnInfoPtr pScrn, int color,
                                int rop, unsigned int planemask);
static void SiSSubsequentSolidTwoPointLine(ScrnInfoPtr pScrn, int x1,
                                int y1, int x2, int y2, int flags);
static void SiSSubsequentSolidHorzVertLine(ScrnInfoPtr pScrn,
                                int x, int y, int len, int dir);
static void SiSSetupForDashedLine(ScrnInfoPtr pScrn,
                                int fg, int bg, int rop, unsigned int planemask,
                                int length, unsigned char *pattern);
static void SiSSubsequentDashedTwoPointLine(ScrnInfoPtr pScrn,
                                int x1, int y1, int x2, int y2,
                                int flags, int phase);
static void SiSSetupForMonoPatternFill(ScrnInfoPtr pScrn,
                                int patx, int paty, int fg, int bg,
                                int rop, unsigned int planemask);
static void SiSSubsequentMonoPatternFill(ScrnInfoPtr pScrn,
                                int patx, int paty,
                                int x, int y, int w, int h);
#ifdef TRAP
static void SiSSubsequentMonoPatternFillTrap(ScrnInfoPtr pScrn,
                                int patx, int paty,
                                int y, int h,
                                int left, int dxL, int dyL, int eL,
	                        int right, int dxR, int dyR, int eR );
#endif
#if 0
static void SiSSetupForColorPatternFill(ScrnInfoPtr pScrn,
                                int patx, int paty, int rop,
                                unsigned int planemask,
                                int trans_color);
static void SiSSubsequentColorPatternFill(ScrnInfoPtr pScrn,
                                int patx, int paty,
                                int x, int y, int w, int h);
#endif
#if 0
static void SiSSetupForCPUToScreenColorExpand(ScrnInfoPtr pScrn,
                                int fg, int bg,
                                int rop, unsigned int planemask);
static void SiSSubsequentCPUToScreenColorExpand(ScrnInfoPtr pScrn,
                                int x, int y, int w, int h, int skipleft);
#endif
#ifdef STSCE
static void SiSSetupForScreenToScreenColorExpand(ScrnInfoPtr pScrn,
                                int fg, int bg,
                                int rop, unsigned int planemask);
static void SiSSubsequentScreenToScreenColorExpand(ScrnInfoPtr pScrn,
                                int x, int y, int w, int h,
                                int srcx, int srcy, int skipleft);
#endif
static void SiSSetupForScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
                                int fg, int bg, int rop,
                                unsigned int planemask);
static void SiSSubsequentScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
                                int x, int y, int w, int h,
                                int skipleft);
static void SiSSubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno);

#ifdef SISDUALHEAD
static void SiSRestoreAccelState(ScrnInfoPtr pScrn);
#endif

static void
SiSInitializeAccelerator(ScrnInfoPtr pScrn)
{
	SISPtr  pSiS = SISPTR(pScrn);

	pSiS->DoColorExpand = FALSE;
}

Bool
SiS300AccelInit(ScreenPtr pScreen)
{
	XAAInfoRecPtr   infoPtr;
	ScrnInfoPtr     pScrn = xf86Screens[pScreen->myNum];
	SISPtr          pSiS = SISPTR(pScrn);
	int		topFB;
	int             reservedFbSize;
	int             UsableFbSize;
	unsigned char   *AvailBufBase;
	BoxRec          Avail;
	int             i;

	pSiS->AccelInfoPtr = infoPtr = XAACreateInfoRec();
	if (!infoPtr)  return FALSE;

	SiSInitializeAccelerator(pScrn);

	infoPtr->Flags = LINEAR_FRAMEBUFFER |
			 OFFSCREEN_PIXMAPS |
			 PIXMAP_CACHE;

	/* sync */
	infoPtr->Sync = SiSSync;

	/* Acceleration only supported at 8, 16 and 32 bpp */
	if((pScrn->bitsPerPixel != 8) && (pScrn->bitsPerPixel != 16) &&
	         (pScrn->bitsPerPixel != 32))
	    return FALSE;

	/* Although SiS states that the 300 series supports a
	 * virtual framebuffer of 4096x4096, the 2D accelerator
	 * does not seem to know that. If the destination bitmap
	 * pitch is > 8192 (which easily happens in 32bpp mode),
	 * the accelerator engine collapses.
	 * TODO: Find out about the 530 and 620
	 */

	if(pSiS->scrnOffset < 8192) {

	   /* screen to screen copy */
	   infoPtr->SetupForScreenToScreenCopy = SiSSetupForScreenToScreenCopy;
	   infoPtr->SubsequentScreenToScreenCopy = SiSSubsequentScreenToScreenCopy;
	   infoPtr->ScreenToScreenCopyFlags = NO_PLANEMASK |
	                                      TRANSPARENCY_GXCOPY_ONLY;

	   /* solid fills */
	   infoPtr->SetupForSolidFill = SiSSetupForSolidFill;
	   infoPtr->SubsequentSolidFillRect = SiSSubsequentSolidFillRect;
#ifdef TRAP
	   infoPtr->SubsequentSolidFillTrap = SiSSubsequentSolidFillTrap;
#endif
	   infoPtr->SolidFillFlags = NO_PLANEMASK;

	   /* solid line */
	   infoPtr->SetupForSolidLine = SiSSetupForSolidLine;
	   infoPtr->SubsequentSolidTwoPointLine = SiSSubsequentSolidTwoPointLine;
	   infoPtr->SubsequentSolidHorVertLine = SiSSubsequentSolidHorzVertLine;
	   infoPtr->SolidLineFlags = NO_PLANEMASK;

	   /* dashed line */
	   infoPtr->SetupForDashedLine = SiSSetupForDashedLine;
	   infoPtr->SubsequentDashedTwoPointLine = SiSSubsequentDashedTwoPointLine;
	   infoPtr->DashPatternMaxLength = 64;
	   infoPtr->DashedLineFlags = NO_PLANEMASK |
	  			      LINE_PATTERN_MSBFIRST_LSBJUSTIFIED;

	   /* 8x8 mono pattern fill */
	   infoPtr->SetupForMono8x8PatternFill = SiSSetupForMonoPatternFill;
	   infoPtr->SubsequentMono8x8PatternFillRect = SiSSubsequentMonoPatternFill;
#ifdef TRAP
	   infoPtr->SubsequentMono8x8PatternFillTrap = SiSSubsequentMonoPatternFillTrap;
#endif
	   infoPtr->Mono8x8PatternFillFlags = NO_PLANEMASK |
					      HARDWARE_PATTERN_SCREEN_ORIGIN |
					      HARDWARE_PATTERN_PROGRAMMED_BITS |
					      /* NO_TRANSPARENCY | */
					      BIT_ORDER_IN_BYTE_MSBFIRST ;

#ifdef STSCE
	   /* Screen To Screen Color Expand */
	   /* The hardware does support this the way we need it */
	   infoPtr->SetupForScreenToScreenColorExpandFill =
	    			SiSSetupForScreenToScreenColorExpand;
	   infoPtr->SubsequentScreenToScreenColorExpandFill =
	    			SiSSubsequentScreenToScreenColorExpand;
	   infoPtr->ScreenToScreenColorExpandFillFlags = NO_PLANEMASK |
	                                              BIT_ORDER_IN_BYTE_MSBFIRST ;
#endif

#if 0
	   /* CPU To Screen Color Expand --- implement another instead of this one! */
	   infoPtr->SetupForCPUToScreenColorExpandFill =
	       SiSSetupForCPUToScreenColorExpand;
	   infoPtr->SubsequentCPUToScreenColorExpandFill =
	       SiSSubsequentCPUToScreenColorExpand;
	   infoPtr->ColorExpandRange = PATREGSIZE;
	   infoPtr->ColorExpandBase = pSiS->IOBase+PBR(0);
	   infoPtr->CPUToScreenColorExpandFillFlags = NO_PLANEMASK |
	   					      BIT_ORDER_IN_BYTE_MSBFIRST |
	    					      NO_TRANSPARENCY |
	    					      SYNC_AFTER_COLOR_EXPAND;
#endif

	   /* per-scanline color expansion (using indirect method) */
	   if(pSiS->VGAEngine == SIS_530_VGA) {
	      pSiS->ColorExpandBufferNumber = 4;
	      pSiS->ColorExpandBufferCountMask = 0x03;
	   } else {
	      pSiS->ColorExpandBufferNumber = 16;
	      pSiS->ColorExpandBufferCountMask = 0x0F;
	   }
	   pSiS->PerColorExpandBufferSize = ((pScrn->virtualX + 31)/32) * 4;
	   infoPtr->NumScanlineColorExpandBuffers = pSiS->ColorExpandBufferNumber;
	   infoPtr->ScanlineColorExpandBuffers = (unsigned char **)&pSiS->ColorExpandBufferAddr[0];

	   infoPtr->SetupForScanlineCPUToScreenColorExpandFill =
	                            SiSSetupForScanlineCPUToScreenColorExpandFill;
	   infoPtr->SubsequentScanlineCPUToScreenColorExpandFill =
	                            SiSSubsequentScanlineCPUToScreenColorExpandFill;
	   infoPtr->SubsequentColorExpandScanline =
	                            SiSSubsequentColorExpandScanline;
	   infoPtr->ScanlineCPUToScreenColorExpandFillFlags = NO_PLANEMASK |
	    						      CPU_TRANSFER_PAD_DWORD |
	    						      SCANLINE_PAD_DWORD |
	    						      BIT_ORDER_IN_BYTE_MSBFIRST |
	    						      LEFT_EDGE_CLIPPING;
        } else {
	   xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
	   	"Virtual screen width too large for accelerator engine\n");
           xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
	   	"2D acceleration and Xv disabled\n");
           pSiS->NoXvideo = TRUE;
	}

#ifdef SISDUALHEAD
	if(pSiS->DualHeadMode) {
	   infoPtr->RestoreAccelState = SiSRestoreAccelState;
	}
#endif

	/* init Frame Buffer Manager */
	topFB = pSiS->maxxfbmem;

	reservedFbSize = pSiS->ColorExpandBufferNumber * pSiS->PerColorExpandBufferSize;

	UsableFbSize = topFB - reservedFbSize;

	/* Layout: (Sizes do not reflect correct proportions)
	 * |--------------++++++++++++++++++++^************==========~~~~~~~~~~~~|
	 *   UsableFbSize  ColorExpandBuffers | DRI-Heap  |  HWCursor  TurboQueue   300/310/325 series
	 * |--------------++++++++++++++++++++|  ====================~~~~~~~~~~~~|
	 *   UsableFbSize  ColorExpandBuffers |        TurboQueue     HWCursor      530/620
	 *                                  topFB
	 */

	AvailBufBase = pSiS->FbBase + UsableFbSize;
	for(i = 0; i < pSiS->ColorExpandBufferNumber; i++) {
	   pSiS->ColorExpandBufferAddr[i] = AvailBufBase +
	 	    i * pSiS->PerColorExpandBufferSize;
	   pSiS->ColorExpandBufferScreenOffset[i] = UsableFbSize +
		    i * pSiS->PerColorExpandBufferSize;
	}
	Avail.x1 = 0;
	Avail.y1 = 0;
	Avail.x2 = pScrn->displayWidth;
	Avail.y2 = (UsableFbSize / (pScrn->displayWidth * pScrn->bitsPerPixel/8)) - 1;

	if(Avail.y2 < 0)  Avail.y2 = 32767;

	if(Avail.y2 < pScrn->currentMode->VDisplay) {
		xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
			"Not enough video RAM for accelerator. At least "
			"%dKB needed, %ldKB available\n",
			((((pScrn->displayWidth * pScrn->bitsPerPixel/8)   /* TW: +8 for make it sure */
			     * pScrn->currentMode->VDisplay) + reservedFbSize) / 1024) + 8,
			pSiS->maxxfbmem/1024);
		pSiS->NoAccel = TRUE;
		pSiS->NoXvideo = TRUE;
		XAADestroyInfoRec(pSiS->AccelInfoPtr);
		pSiS->AccelInfoPtr = NULL;
		return FALSE;
	}

	xf86DrvMsg(pScrn->scrnIndex, X_INFO,
		   "Frame Buffer From (%d,%d) To (%d,%d)\n",
		   Avail.x1, Avail.y1, Avail.x2, Avail.y2);

	xf86InitFBManager(pScreen, &Avail);

	return(XAAInit(pScreen, infoPtr));
}


static void 
SiSSync(ScrnInfoPtr pScrn)
{
	SISPtr pSiS = SISPTR(pScrn);

	PDEBUG(ErrorF("SiSSync()\n"));

	pSiS->DoColorExpand = FALSE;
	SiSIdle
}

#ifdef SISDUALHEAD
static void
SiSRestoreAccelState(ScrnInfoPtr pScrn)
{
	SISPtr pSiS = SISPTR(pScrn);

	/* We don't need to do anything special here; forcing the
	 * other head to re-read the CmdQueLen is not necessary:
	 * After the Sync in RestoreAccelState(), the real queue
	 * length is always larger than (or at least equal to)
	 * the amount stored in CmdQueueLen of the other head,
	 * so the only thing that might happen is one unnecessary
	 * Sync on the other head. I think we can live with that.
	 */
	pSiS->DoColorExpand = FALSE;
	SiSIdle
}
#endif

static void SiSSetupForScreenToScreenCopy(ScrnInfoPtr pScrn,
                                int xdir, int ydir, int rop,
                                unsigned int planemask, int trans_color)
{
	SISPtr  pSiS = SISPTR(pScrn);

	PDEBUG(ErrorF("Setup ScreenCopy(%d, %d, 0x%x, 0x%x, 0x%x)\n",
					xdir, ydir, rop, planemask, trans_color));

	SiSSetupDSTColorDepth(pSiS->DstColor);
	SiSSetupSRCPitch(pSiS->scrnOffset)
	SiSSetupDSTRect(pSiS->scrnOffset, -1)

	if(trans_color != -1) {
	   SiSSetupROP(0x0A)
	   SiSSetupSRCTrans(trans_color)
	   SiSSetupCMDFlag(TRANSPARENT_BITBLT)
	} else {
	   SiSSetupROP(XAACopyROP[rop])
	}
	if(xdir > 0) {
	   SiSSetupCMDFlag(X_INC)
	}
	if(ydir > 0) {
	   SiSSetupCMDFlag(Y_INC)
	}
}

static void SiSSubsequentScreenToScreenCopy(ScrnInfoPtr pScrn,
                                int src_x, int src_y, int dst_x, int dst_y,
                                int width, int height)
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 srcbase, dstbase;

	PDEBUG(ErrorF("Subsequent ScreenCopy(%d,%d, %d,%d, %d,%d)\n",
					src_x, src_y, dst_x, dst_y, width, height));

	srcbase = dstbase = 0;
	if(src_y >= 2048) {
	   srcbase = pSiS->scrnOffset * src_y;
	   src_y = 0;
	}
	if((dst_y >= pScrn->virtualY) || (dst_y >= 2048)) {
	   dstbase = pSiS->scrnOffset * dst_y;
	   dst_y = 0;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   srcbase += HEADOFFSET;
	   dstbase += HEADOFFSET;
	}
#endif
	SiSSetupSRCBase(srcbase);
	SiSSetupDSTBase(dstbase);

	if(!(pSiS->CommandReg & X_INC))  {
	   src_x += width-1;
	   dst_x += width-1;
	}
	if(!(pSiS->CommandReg & Y_INC))  {
	   src_y += height-1;
	   dst_y += height-1;
	}
	SiSSetupRect(width, height)
	SiSSetupSRCXY(src_x, src_y)
	SiSSetupDSTXY(dst_x, dst_y)

	SiSDoCMD
}

static void
SiSSetupForSolidFill(ScrnInfoPtr pScrn,
                        int color, int rop, unsigned int planemask)
{
	SISPtr pSiS = SISPTR(pScrn);

	PDEBUG(ErrorF("Setup SolidFill(0x%x, 0x%x, 0x%x)\n",
					color, rop, planemask));

	if(pSiS->disablecolorkeycurrent) {
	   if((CARD32)color == pSiS->colorKey) {
	      rop = 5;  /* NOOP */
	   }
	}
	SiSSetupPATFG(color)
	SiSSetupDSTRect(pSiS->scrnOffset, -1)
	SiSSetupDSTColorDepth(pSiS->DstColor);
	SiSSetupROP(XAAPatternROP[rop])
	/* SiSSetupCMDFlag(PATFG) - is zero */
}

static void
SiSSubsequentSolidFillRect(ScrnInfoPtr pScrn,
                        int x, int y, int w, int h)
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 dstbase;

	PDEBUG(ErrorF("Subsequent SolidFillRect(%d, %d, %d, %d)\n",
					x, y, w, h));
	dstbase = 0;

	if(y >= 2048) {
	   dstbase = pSiS->scrnOffset * y;
	   y = 0;
	}
#ifdef SISDUALHEAD
        if(pSiS->VGAEngine != SIS_530_VGA) {
	   dstbase += HEADOFFSET;
        }
#endif
	SiSSetupDSTBase(dstbase)
	SiSSetupDSTXY(x,y)
	SiSSetupRect(w,h)
	/* Clear commandReg because Setup can be used for Rect and Trap */
	pSiS->CommandReg &= ~(T_XISMAJORL | T_XISMAJORR |
	                      T_L_X_INC | T_L_Y_INC |
	                      T_R_X_INC | T_R_Y_INC |
			      TRAPAZOID_FILL);
	SiSSetupCMDFlag(X_INC | Y_INC | BITBLT)

	SiSDoCMD
}

/* Trapezoid */
/* This would work better if XAA would provide us with valid trapezoids.
 * In fact, with small trapezoids the left and the right edge often cross
 * each other or result in a line length of 0 which causes drawing errors
 * (filling over whole scanline).
 * Furthermore, I have not found out how to draw trapezoids with a height
 * greater than 127.
 */
#ifdef TRAP
static void
SiSSubsequentSolidFillTrap(ScrnInfoPtr pScrn, int y, int h,
	       int left,  int dxL, int dyL, int eL,
	       int right, int dxR, int dyR, int eR )
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 dstbase;
#if 0
	float kL, kR;
#endif

	dstbase = 0;
	if(y >= 2048) {
	   dstbase=pSiS->scrnOffset*y;
	   y = 0;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   dstbase += HEADOFFSET;
	}
#endif
	SiSSetupDSTBase(dstbase)
	/* SiSSetupRect(w,h) */

#if 1
	SiSSetupPATFG(0xff0000) /* FOR TESTING */
#endif

	/* Clear CommandReg because SetUp can be used for Rect and Trap */
	pSiS->CommandReg &= ~(T_L_X_INC | T_L_Y_INC |
	                      T_R_X_INC | T_R_Y_INC |
	                      T_XISMAJORL | T_XISMAJORR |
			      BITBLT);

        xf86DrvMsg(0, X_INFO, "Trap (%d %d %d %d) dxL %d dyL %d eL %d   dxR %d dyR %d eR %d\n",
		left, right, y, h, dxL, dyL, eL, dxR, dyR, eR);

	/* Unfortunately, we must check if the right and the left edge
	 * cross each other...  INCOMPLETE (line equation wrong)
	 */
#if 0
	if (dxL == 0) kL = 0;
	else kL = (float)dyL / (float)dxL;
	if (dxR == 0) kR = 0;
	else kR = (float)dyR / (float)dxR;
	xf86DrvMsg(0, X_INFO, "kL %f kR %f!\n", kL, kR);
	if ( (kR != kL) &&
	     (!(kR == 0 && kL == 0)) &&
	     (!(kR <  0 && kL >  0)) ) {
	   xf86DrvMsg(0, X_INFO, "Inside if (%f - %d)\n", ( kL * ( ( ((float)right - (float)left) / (kL - kR) ) - left) + y), h+y);
           if ( ( ( kL * ( ( ((float)right - (float)left) / (kL - kR) ) - (float)left) + (float)y) < (h + y) ) ) {
	     xf86DrvMsg(0, X_INFO, "Cross detected!\n");
	   }
	}
#endif

	/* Determine egde angles */
	if(dxL < 0) { dxL = -dxL; }
	else { SiSSetupCMDFlag(T_L_X_INC) }
	if(dxR < 0) { dxR = -dxR; }
	else { SiSSetupCMDFlag(T_R_X_INC) }

	/* (Y direction always positive - do this anyway) */
	if(dyL < 0) { dyL = -dyL; }
	else { SiSSetupCMDFlag(T_L_Y_INC) }
	if(dyR < 0) { dyR = -dyR; }
	else { SiSSetupCMDFlag(T_R_Y_INC) }

	/* Determine major axis */
	if(dxL >= dyL) {      /* X is major axis */
	   SiSSetupCMDFlag(T_XISMAJORL)
	}
	if(dxR >= dyR) {      /* X is major axis */
	   SiSSetupCMDFlag(T_XISMAJORR)
	}

	/* Set up deltas */
	SiSSetupdL(dxL, dyL)
	SiSSetupdR(dxR, dyR)

#if 0   /* Could it be that this crappy engine can only draw trapezoids up to 127 pixels high? */
	h &= 0x7F;
	if (h == 0) h = 10;
#endif

	/* Set up y, h, left, right */
	SiSSetupYH(y,h)
	SiSSetupLR(left,right)

	/* Set up initial error term */
	SiSSetupEL(eL)
	SiSSetupER(eR)

	SiSSetupCMDFlag(TRAPAZOID_FILL);

	SiSDoCMD
}
#endif

static void
SiSSetupForSolidLine(ScrnInfoPtr pScrn,
                        int color, int rop, unsigned int planemask)
{
	SISPtr pSiS = SISPTR(pScrn);

	PDEBUG(ErrorF("Setup SolidLine(0x%x, 0x%x, 0x%x)\n",
					color, rop, planemask));

	SiSSetupLineCount(1)
	SiSSetupPATFG(color)
	SiSSetupDSTRect(pSiS->scrnOffset, -1)
	SiSSetupDSTColorDepth(pSiS->DstColor);
	SiSSetupROP(XAAPatternROP[rop])
	SiSSetupCMDFlag(PATFG | LINE)
}

static void
SiSSubsequentSolidTwoPointLine(ScrnInfoPtr pScrn,
                        int x1, int y1, int x2, int y2, int flags)
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 dstbase;
	int    miny,maxy;

	PDEBUG(ErrorF("Subsequent SolidLine(%d, %d, %d, %d, 0x%x)\n",
					x1, y1, x2, y2, flags));

	dstbase = 0;
	miny = (y1 > y2) ? y2 : y1;
	maxy = (y1 > y2) ? y1 : y2;
	if(maxy >= 2048) {
	   dstbase = pSiS->scrnOffset * miny;
	   y1 -= miny;
	   y2 -= miny;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   dstbase += HEADOFFSET;
	}
#endif
	SiSSetupDSTBase(dstbase)

	SiSSetupX0Y0(x1,y1)
	SiSSetupX1Y1(x2,y2)
	if(flags & OMIT_LAST) {
	   SiSSetupCMDFlag(NO_LAST_PIXEL)
	} else {
	   pSiS->CommandReg &= ~(NO_LAST_PIXEL);
	}

	SiSDoCMD
}

static void
SiSSubsequentSolidHorzVertLine(ScrnInfoPtr pScrn,
                                int x, int y, int len, int dir)
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 dstbase;

	PDEBUG(ErrorF("Subsequent SolidHorzVertLine(%d, %d, %d, %d)\n",
					x, y, len, dir));
	len--; /* starting point is included! */

	dstbase = 0;
	if((y >= 2048) || ((dir != DEGREES_0) && ((y + len) >= 2048))) {
	   dstbase = pSiS->scrnOffset * y;
	   y = 0;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   dstbase += HEADOFFSET;
	}
#endif
	SiSSetupDSTBase(dstbase)

	SiSSetupX0Y0(x,y)
	if(dir == DEGREES_0) {
	   SiSSetupX1Y1(x + len, y);
	} else {
	   SiSSetupX1Y1(x, y + len);
	}

	SiSDoCMD
}

static void
SiSSetupForDashedLine(ScrnInfoPtr pScrn,
                                int fg, int bg, int rop, unsigned int planemask,
                                int length, unsigned char *pattern)
{
	SISPtr pSiS = SISPTR(pScrn);

	PDEBUG(ErrorF("Setup DashedLine(0x%x, 0x%x, 0x%x, 0x%x, %d, 0x%x:%x)\n",
			fg, bg, rop, planemask, length, *(pattern+4), *pattern));

	SiSSetupLineCount(1)
	SiSSetupDSTRect(pSiS->scrnOffset, -1)
	SiSSetupDSTColorDepth(pSiS->DstColor);
	SiSSetupStyleLow(*pattern)
	SiSSetupStyleHigh(*(pattern+4))
	SiSSetupStylePeriod(length-1);
	SiSSetupROP(XAAPatternROP[rop])
	SiSSetupPATFG(fg)
	SiSSetupCMDFlag(LINE | LINE_STYLE)
	if(bg != -1) {
	   SiSSetupPATBG(bg)
	} else {
	   SiSSetupCMDFlag(TRANSPARENT);
	}
}

static void
SiSSubsequentDashedTwoPointLine(ScrnInfoPtr pScrn,
                                int x1, int y1, int x2, int y2,
                                int flags, int phase)
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 dstbase;
	int    miny,maxy;

	PDEBUG(ErrorF("Subsequent DashedLine(%d,%d, %d,%d, 0x%x,0x%x)\n",
			x1, y1, x2, y2, flags, phase));

	dstbase = 0;
	miny = (y1 > y2) ? y2 : y1;
	maxy = (y1 > y2) ? y1 : y2;
	if(maxy >= 2048) {
	   dstbase = pSiS->scrnOffset * miny;
	   y1 -= miny;
	   y2 -= miny;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   dstbase += HEADOFFSET;
	}
#endif
	SiSSetupDSTBase(dstbase)

	SiSSetupX0Y0(x1,y1)
	SiSSetupX1Y1(x2,y2)
	if(flags & OMIT_LAST) {
	   SiSSetupCMDFlag(NO_LAST_PIXEL)
	} else {
	   pSiS->CommandReg &= ~(NO_LAST_PIXEL);
	}

	SiSDoCMD
}

static void
SiSSetupForMonoPatternFill(ScrnInfoPtr pScrn,
                                int patx, int paty, int fg, int bg,
                                int rop, unsigned int planemask)
{
	SISPtr pSiS = SISPTR(pScrn);

	PDEBUG(ErrorF("Setup MonoPatFill(0x%x,0x%x, 0x%x,0x%x, 0x%x, 0x%x)\n",
					patx, paty, fg, bg, rop, planemask));
	SiSSetupDSTRect(pSiS->scrnOffset, -1)
	SiSSetupDSTColorDepth(pSiS->DstColor);
	SiSSetupMONOPAT(patx,paty)
	SiSSetupPATFG(fg)
	SiSSetupROP(XAAPatternROP[rop])
	SiSSetupCMDFlag(PATMONO)
	if(bg != -1) {
	   SiSSetupPATBG(bg)
	} else {
	   SiSSetupCMDFlag(TRANSPARENT)
	}
}

static void
SiSSubsequentMonoPatternFill(ScrnInfoPtr pScrn,
                                int patx, int paty,
                                int x, int y, int w, int h)
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 dstbase;

	PDEBUG(ErrorF("Subsequent MonoPatFill(0x%x,0x%x, %d,%d, %d,%d)\n",
							patx, paty, x, y, w, h));
	dstbase = 0;

	if(y >= 2048) {
	   dstbase = pSiS->scrnOffset * y;
	   y = 0;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   dstbase += HEADOFFSET;
	}
#endif
	SiSSetupDSTBase(dstbase)
	SiSSetupDSTXY(x, y)
	SiSSetupRect(w, h)
	/* Clear commandReg because Setup can be used for Rect and Trap */
	pSiS->CommandReg &= ~(T_XISMAJORL | T_XISMAJORR |
	                      T_L_X_INC | T_L_Y_INC |
	                      T_R_X_INC | T_R_Y_INC |
	                      TRAPAZOID_FILL);
	SiSSetupCMDFlag(X_INC | Y_INC)

	SiSDoCMD
}

/* Trapezoid */
#ifdef TRAP
static void
SiSSubsequentMonoPatternFillTrap(ScrnInfoPtr pScrn,
               int patx, int paty,
               int y, int h,
	       int left, int dxL, int dyL, int eL,
	       int right, int dxR, int dyR, int eR )
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 dstbase;

	PDEBUG(ErrorF("Subsequent Mono8x8PatternFillTrap(%d, %d, %d - %d %d/%d %d/%d)\n",
					y, h, left, right, dxL, dxR, eL, eR));

	dstbase = 0;
	if(y >= 2048) {
	   dstbase = pSiS->scrnOffset * y;
	   y = 0;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   dstbase += HEADOFFSET;
	}
#endif
	SiSSetupDSTBase(dstbase)

	/* Clear CommandReg because SetUp can be used for Rect and Trap */
	pSiS->CommandReg &= ~(T_XISMAJORL | T_XISMAJORR |
	                      T_L_X_INC | T_L_Y_INC |
			      T_R_X_INC | T_R_Y_INC |
			      BITBLT);

	if(dxL < 0) { dxL = -dxL;  }
	else { SiSSetupCMDFlag(T_L_X_INC) }
	if(dxR < 0) { dxR = -dxR; }
	else { SiSSetupCMDFlag(T_R_X_INC) }

	if(dyL < 0) { dyL = -dyL; }
	else { SiSSetupCMDFlag(T_L_Y_INC) }
	if(dyR < 0) { dyR = -dyR; }
	else { SiSSetupCMDFlag(T_R_Y_INC) }

	/* Determine major axis */
	if(dxL >= dyL) {      /* X is major axis */
	   SiSSetupCMDFlag(T_XISMAJORL)
	}
	if(dxR >= dyR) {      /* X is major axis */
	   SiSSetupCMDFlag(T_XISMAJORR)
	}

	SiSSetupYH(y,h)
	SiSSetupLR(left,right)

	SiSSetupdL(dxL, dyL)
	SiSSetupdR(dxR, dyR)

	SiSSetupEL(eL)
	SiSSetupER(eR)

	SiSSetupCMDFlag(TRAPAZOID_FILL);

	SiSDoCMD
}
#endif


#if 0

/* The following (already commented) functions have NOT been adapted for dual-head mode */

/* ----- CPU To Screen Color Expand (single task) ------------------------- */

/* This does not work. Assumingly for the same
 * reason why STSColorExpand does not work either.
 */
static void
SiSSetupForCPUToScreenColorExpand(ScrnInfoPtr pScrn,
                                int fg, int bg,
                                int rop, unsigned int planemask)
{
	SISPtr pSiS = SISPTR(pScrn);

	PDEBUG(ErrorF("Setup CPUToScreen ColorExpand(0x%x,0x%x, 0x%x,0x%x)\n",
					fg, bg, rop, planemask));

/*      SiSSetupDSTRect(pSiS->scrnOffset, pScrn->virtualY)*/
	SiSSetupDSTRect(pSiS->scrnOffset, -1)
	SiSSetupDSTColorDepth(pSiS->DstColor);
	SiSSetupSRCXY(0,0)
	SiSSetupSRCFG(fg)
	SiSSetupROP(XAAPatternROP[rop])
	SiSSetupCMDFlag(X_INC | Y_INC | COLOREXP)
	if(bg == -1) {
	   SiSSetupCMDFlag(TRANSPARENT)
	} else {
	   SiSSetupSRCBG(bg)
	}
}

static void
SiSSubsequentCPUToScreenColorExpand(ScrnInfoPtr pScrn,
                                int x, int y, int w, int h, int skipleft)
{
	SISPtr pSiS = SISPTR(pScrn);
	CARD32 dstbase;

	PDEBUG(ErrorF("Subsequent CPUToScreen ColorExpand(%d,%d, %d,%d, %d)\n",
							x, y, w, h, skipleft));

	dstbase = 0;
	if(y >= 2048) {
	   dstbase = pSiS->scrnOffset * y;
	    y = 0;
	}
	SiSSetupDSTBase(dstbase)

/*      SiSSetupSRCPitch(((w+31)&0xFFE0)/8)*/
	SiSSetupSRCPitch((w+7)/8)
	SiSSetupDSTXY(x,y)
	SiSSetupRect(w,h)
/*      SiSDoCMD*/
	pSiS->DoColorExpand = TRUE;
}
#endif

/* ------ Screen To Screen Color Expand ------------------------------- */

/* The hareware does not seem to support this the way we need it */

#ifdef STSCE
static void
SiSSetupForScreenToScreenColorExpand(ScrnInfoPtr pScrn,
                                int fg, int bg,
                                int rop, unsigned int planemask)
{
	SISPtr pSiS = SISPTR(pScrn);

	PDEBUG(ErrorF("Setup ScreenToScreen ColorExp(0x%x,0x%x, 0x%x)\n",
							fg, bg, rop));

	SiSSetupDSTColorDepth(pSiS->DstColor)
	SiSSetupDSTRect(pSiS->scrnOffset, -1)
	SiSSetupROP(XAACopyROP[rop])
	SiSSetupSRCFG(fg)
	/* SiSSetupSRCXY(0,0) */

	if(bg == -1) {
	   SiSSetupCMDFlag(TRANSPARENT | ENCOLOREXP | X_INC |
				Y_INC | SRCVIDEO);
	} else {
	   SiSSetupSRCBG(bg);
	   SiSSetupCMDFlag(ENCOLOREXP | X_INC | Y_INC |
				SRCVIDEO);
	};
}
#endif

/* This method blits in a single task; this does not seem to work
 * because the hardware does not use the source pitch as scanline
 * offset but only to calculate pattern address from source X and Y.
 * XAA provides the pattern bitmap with scrnOffset (displayWidth * bpp/8)
 * offset, but this does not seem to be supported by the hardware.
 */
#ifdef STSCE

/* For testing, these are the methods: (use only one at a time!) */

#undef npitch 		/* Normal: Use srcx/y as srcx/y, use scrnOffset as source pitch
			 * This would work if the hareware used the source pitch for
			 * incrementing the source address after each scanline - but
			 * it doesn't do this! The first line of the area is correctly
			 * color expanded, but since the source pitch is ignored and
			 * the source address not incremented correctly, the following
			 * lines are color expanded with any bit pattern that is left
			 * in the unused space of the source bitmap (which is organized
			 * with the depth of the screen framebuffer hence with a pitch
			 * of scrnOffset).
			 */

#undef pitchdw    	/* Use source pitch "displayWidth / 8" instead
		   	 * of scrnOffset (=displayWidth * bpp / 8)
			 * This can't work, because the pitch of the source
			 * bitmap is scrnoffset!
		   	 */

#define  nopitch   	/* Calculate srcbase with srcx and srcy, set the
		   	 * pitch to scrnOffset (which IS the correct pitch
		   	 * for the source bitmap) and set srcx and srcy both
		   	 * to 0.
			 * This would work if the hareware used the source pitch for
			 * incrementing the source address after each scanline - but
			 * it doesn't do this! Again: The first line of the area is
			 * correctly color expanded, but since the source pitch is
			 * ignored for scanline address incremention, the following
			 * lines are not correctly color expanded.
			 * WHATEVER I write to source pitch is ignored!
		   	 */

static void
SiSSubsequentScreenToScreenColorExpand(ScrnInfoPtr pScrn,
                                int x, int y, int w, int h,
                                int srcx, int srcy, int skipleft)
{
	SISPtr pSiS = SISPTR(pScrn);
        CARD32 srcbase, dstbase;
#if 0
	int _x0, _y0, _x1, _y1;
#endif
#ifdef pitchdw
	int newsrcx, newsrcy;

	/* srcx and srcy are provided based on a scrnOffset pitch ( = displayWidth * bpp / 8 )
	 * We recalulate srcx and srcy based on pitch = displayWidth / 8
	 */
        newsrcy = ((pSiS->scrnOffset * srcy) + (srcx * ((pScrn->bitsPerPixel+7)/8))) /
					  (pScrn->displayWidth/8);
        newsrcx = ((pSiS->scrnOffset * srcy) + (srcx * ((pScrn->bitsPerPixel+7)/8))) %
					  (pScrn->displayWidth/8);
#endif
	xf86DrvMsg(0, X_INFO, "Sub ScreenToScreen ColorExp(%d,%d, %d,%d, %d,%d, %d)\n",
					x, y, w, h, srcx, srcy, skipleft);

	srcbase = dstbase = 0;

#ifdef pitchdw
	if(newsrcy >= 2048) {
	   srcbase = (pScrn->displayWidth / 8) * newsrcy;
	   newsrcy = 0;
	}
#endif
#ifdef nopitch
	srcbase = (pSiS->scrnOffset * srcy) + (srcx * ((pScrn->bitsPerPixel+7)/8));
#endif
#ifdef npitch
	if(srcy >= 2048) {
	   srcbase = pSiS->scrnOffset * srcy;
	   srcy = 0;
	}
#endif
	if(y >= 2048) {
	   dstbase = pSiS->scrnOffset * y;
	   y = 0;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   srcbase += HEADOFFSET;
	   dstbase += HEADOFFSET;
	}
#endif
	SiSSetupSRCBase(srcbase)
	SiSSetupDSTBase(dstbase)

#ifdef pitchdw
	SiSSetupSRCPitch(pScrn->displayWidth/8)
#endif
#ifdef nopitch
	SiSSetupSRCPitch(pSiS->scrnOffset)
	/* SiSSetupSRCPitch(100) */ /* For test - has NO effect WHATSOEVER */
#endif
#ifdef npitch
	SiSSetupSRCPitch(pSiS->scrnOffset)
#endif

	SiSSetupRect(w,h)

#if 0   /* How do I implement the offset? Not this way, that's for sure.. */
	if (skipleft > 0) {
		_x0 = x+skipleft;
		_y0 = y;
		_x1 = x+w;
		_y1 = y+h;
		SiSSetupClipLT(_x0, _y0);
		SiSSetupClipRB(_x1, _y1);
		SiSSetupCMDFlag(CLIPENABLE);
	}
#endif
#ifdef pitchdw
	SiSSetupSRCXY(newsrcx, newsrcy)
#endif
#ifdef nopitch
	SiSSetupSRCXY(0,0)
#endif
#ifdef npitch
	SiSSetupSRCXY(srcx, srcy)
#endif

	SiSSetupDSTXY(x,y)

	SiSDoCMD
}
#endif

/* ----- CPU To Screen Color Expand (scanline-wise) ----------------- */

/* We do it using the indirect method */

static void
SiSSetupForScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn,
		int fg, int bg, int rop, unsigned int planemask)
{
	SISPtr pSiS=SISPTR(pScrn);

        /* TW: Make sure that current CPU-driven BitBlt buffer stage is 0
	 *     This is required!!! (Otherwise -> drawing errors)
	 */
	while((MMIO_IN16(pSiS->IOBase, 0x8242) & 0x1F00) != 0) {} /* WDR: == 0x10 */

	SiSSetupSRCXY(0,0);
	SiSSetupROP(XAACopyROP[rop]);
	SiSSetupSRCFG(fg);
	SiSSetupDSTRect(pSiS->scrnOffset, -1);
	SiSSetupDSTColorDepth(pSiS->DstColor);
	if(bg == -1) {
	   SiSSetupCMDFlag(TRANSPARENT |
	                   ENCOLOREXP |
	   		   X_INC | Y_INC |
			   SRCCPUBLITBUF);
	} else {
	   SiSSetupSRCBG(bg);
	   SiSSetupCMDFlag(ENCOLOREXP |
	                   X_INC | Y_INC |
		   	   SRCCPUBLITBUF);
	}
}


static void
SiSSubsequentScanlineCPUToScreenColorExpandFill(
                        ScrnInfoPtr pScrn, int x, int y, int w,
                        int h, int skipleft)
{
	SISPtr pSiS = SISPTR(pScrn);
	int    _x0, _y0, _x1, _y1;
	CARD32 dstbase;

	dstbase = 0;
	if((y >= 2048) || ((y + h) >= 2048)) {
	   dstbase = pSiS->scrnOffset * y;
	   y = 0;
	}
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   dstbase += HEADOFFSET;
	}
#endif

	/* Wait until there is no color expansion command in queue
	 * (This solves the OpenOffice.org window-move bug)
	 * Added Idle-check - bit 23 is set sometimes, although
	 * engine is actually idle!
	 * Update: Bit 23 is not reliable. After heavy 3D engine
	 * action, this bit never gets cleared again. So do
	 * SiSIdle instead.
	 */
	if((MMIO_IN16(pSiS->IOBase, 0x8242) & 0xe000) != 0xe000) {
           /* while ((MMIO_IN16(pSiS->IOBase, 0x8242) & 0x0080) != 0) {} */
	   SiSIdle
	}

	SiSSetupDSTBase(dstbase)

	if(skipleft > 0) {
	   _x0 = x + skipleft;
	   _y0 = y;
	   _x1 = x + w;
	   _y1 = y + h;
	   SiSSetupClipLT(_x0, _y0);
	   SiSSetupClipRB(_x1, _y1);
	   SiSSetupCMDFlag(CLIPENABLE);
	} else {
	   pSiS->CommandReg &= (~CLIPENABLE);
	}

	SiSSetupRect(w, 1);
        SiSSetupSRCPitch(((((w+7)/8)+3) >> 2) * 4);
	pSiS->xcurrent = x;
	pSiS->ycurrent = y;
}

static void
SiSSubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno)
{
	SISPtr pSiS=SISPTR(pScrn);
#if 0
	int newhead,bltbufstage,newtail;
#endif
	CARD32 cbo;

	cbo = pSiS->ColorExpandBufferScreenOffset[bufno];
#ifdef SISDUALHEAD
	if(pSiS->VGAEngine != SIS_530_VGA) {
	   cbo += HEADOFFSET;
	}
#endif

	/* Wait until there is no color expansion command in queue
	 * (This solves the GTK-big-font bug)
	 * Added Idle-check - bit 23 is set sometimes, although
	 * engine is actually idle!
	 * Update: Bit 23 is not reliable. After heavy 3D engine
	 * action, this bit never gets cleared again. So do
	 * SiSIdle instead.
	 */
	if((MMIO_IN16(pSiS->IOBase, 0x8242) & 0xe000) != 0xe000) {
	   /* while ((MMIO_IN16(pSiS->IOBase, 0x8242) & 0x0080) != 0) {} */
	   SiSIdle
	}

	SiSSetupSRCBase(cbo);

	SiSSetupDSTXY(pSiS->xcurrent, pSiS->ycurrent);

	SiSDoCMD

	pSiS->ycurrent++;

	if(pSiS->VGAEngine == SIS_530_VGA) {
	   while(MMIO_IN8(pSiS->IOBase, 0x8242) & 0x80) {}
	}
}