pulseaudio: Drop draft status on 16.0 notes

1 files changed, 350 insertions, 4 deletions

diff --git a/Software/PulseAudio/Notes/16.0.mdwn b/Software/PulseAudio/Notes/16.0.mdwn
index fef82fa1..e8aad855 100644
--- a/Software/PulseAudio/Notes/16.0.mdwn
+++ b/Software/PulseAudio/Notes/16.0.mdwn
@@ -1,11 +1,9 @@
 [[!inline pages="Software/PulseAudio/TOC" quick="yes" raw="yes"]]
 
-# PulseAudio 16.0 release notes (draft)
+# PulseAudio 16.0 release notes
 
 [[!toc startlevel=2 levels=3]]
 
-Contains changes up to commit 325108e532e770a7b5951b84acb55ff95a568535 (commit date 2022-05-17).
-
 ## Notes for end users
 
 ### Opus support in the RTP modules
@@ -101,5 +99,353 @@ It's now possible to build the daemon without building the client parts at the s
 ## git shortlog
 
 <pre>
-TODO
+Alexey Rubtsov (1):
+      Translated using Weblate (Russian)
+
+Anders Jonsson (3):
+      Translated using Weblate (Swedish)
+      Translated using Weblate (Swedish)
+      Translated using Weblate (Swedish)
+
+Andika Triwidada (3):
+      Translated using Weblate (Indonesian)
+      Translated using Weblate (Indonesian)
+      Translated using Weblate (Indonesian)
+
+Arun Raghavan (5):
+      combine-sink: Set origin_sink for each output stream
+      tests: Add passthrough test back to daemon tests
+      build-sys: Bump libpulse soversion for 16.0
+      Update NEWS for 16.0
+      build-sys: Bump soversion for 16.0 release
+
+Biswapriyo Nath (2):
+      Fix pointer to integer cast warnings
+      Install modules in bindir for Windows
+
+BtbN (1):
+      channelmap: make channel map tables static
+
+Chengyi Zhao (2):
+      alsa-mixer: Recognize rear mic jack mixer of USB audio
+      bluetooth: Try to reconnect SCO
+
+Chupligin Sergey (1):
+      Fix spelling of warning
+
+Craig Howard (5):
+      tunnel-sink-new: refactor sink creation
+      tunnel-sink-new: create sink *after* connection
+      tunnel-sink-new: reinit module
+      tunnel-source-new: add restart/reconnect logic
+      module-tunnel: restart module
+
+Daniel Dantur (1):
+      Translated using Weblate (Spanish)
+
+Daniel Hernandez (1):
+      Translated using Weblate (Spanish)
+
+Diederik de Haas (1):
+      conf: Note configuration snippets must end in .pa
+
+Dylan Van Assche (1):
+      Update NEWS for 16.0
+
+Emilio Herrera (1):
+      Translated using Weblate (Spanish)
+
+Ettore Atalan (1):
+      Translated using Weblate (German)
+
+Fran Diéguez (1):
+      Translated using Weblate (Galician)
+
+Georg Chini (43):
+      combine-sink: Fix latency calculations
+      combine-sink: Add rate controller
+      combine-sink: Improve initial latency reports
+      combine-sink: Use configured resampler, reduce update time to 1s
+      tunnel: Fix latency calculations
+      tunnel: Make fixed latency configurable
+      sink-input: Add history memblockq
+      resampler: Add pa_resampler_prepare() and pa_resampler_get_delay() functions
+      sink-input: Implement resampler pseudo rewinding
+      sink-input: Change move logic
+      source-output: Fix rewinding
+      virtual sources: Include resampler delay in latency reports
+      loopback: Add resampler delay to latency snapshots
+      sink-input: Limit rewinding to max_rewind for virtual sinks
+      sink-input: Query sink inputs for max_rewind value when setting max_rewind
+      tests: Add resampler rewind test
+      pulsecore: Add alternative time smoother implementation
+      Add configuration option enable-smoother-2 to enable alternative smoother code
+      alsa sink/source: Allow alsa to use alternative smoother code
+      bluetooth: Allow bluetooth to use alternative smoother code
+      stream: Allow stream.c to use alternative smoother code
+      combine-sink: Allow module-combine-sink to use alternative smoother code
+      tunnel: Allow module-tunnel to use alternative smoother code
+      esound-sink: Allow module-esound-sink to use alternative smoother code
+      raop-sink: Allow module-raop-sink to use alternative smoother code
+      solaris: Allow module-solaris to use alternative smoother code
+      loopback: Do not detect underruns during initial latency adjustments
+      loopback: Limit controller step size to 2.01‰
+      loopback: Optimize adaptive re-sampling
+      loopback: Add latency prediction and Kalman filter
+      loopback: Track prediction error; debug and cosmetic changes
+      loopback: Add adjust_threshold_usec parameter
+      loopback: Only use controller weight after target latency has been crossed twice
+      loopback: Change adjust_time parameter to double to allow adjust times below 1s
+      loopback: Add log_interval parameter
+      module-tunnel-sink/source-new: Add PA_STREAM_ADJUST_LATENCY flag at stream creation
+      time-smoother-2: Fix integer type problem
+      tunnel modules: Fix threading issues
+      tunnel modules: Fix crash when the module was unloaded while waiting for re-init
+      module-tunnel: Improve latency calculation
+      zeroconf-publish: Fix crash when avahi_client_new() fails
+      various places: Include resampler delay to latency reports and calculations
+      combine-sink: Fix latency reports
+
+Gogo Gogsi (4):
+      Translated using Weblate (Croatian)
+      Translated using Weblate (Croatian)
+      Translated using Weblate (Croatian)
+      Translated using Weblate (Croatian)
+
+Göran Uddeborg (3):
+      Translated using Weblate (Swedish)
+      Translated using Weblate (Swedish)
+      Translated using Weblate (Swedish)
+
+Hela Basa (1):
+      Translated using Weblate (Sinhala)
+
+Hui Wang (1):
+      card-restore: setting preferred ports in entry_from_card
+
+Igor V. Kovalenko (35):
+      alsa-mixer: Set mdev to NULL if there is no mapping
+      rtp: Initialize adapter to NULL for early pipeline error
+      build-sys: meson: Require xice, xsm and xtst for daemon only
+      build-sys: meson: Check if cpuid.h header is usable
+      alsa-mixer: Add EPOS/Sennheiser GSP 670 and GSA 70
+      bluetooth: Allow SCO socket packet size to be larger than mSBC frame
+      mainloop-test: Disarm io callback on EOF
+      alsa-mixer: add support for SteelSeries Arctis Pro + GameDAC
+      combine-sink: Add remix modarg
+      ladspa-sink: fix compiled in default LADSPA_PATH string
+      socket-server: Move systemd socket activation code to pulsecore
+      Fix expression with side effect in pa_assert
+      thread-mainloop: Release once_unlocked_data object after callback
+      bluetooth: Add missing breaks to profile availability check
+      message-params: If message paremeters is not JSON, wrap into JSON string
+      bluetooth: Release container with device UUID strings
+      message-params: Remove unwanted translations from log statements
+      x11: Close session manager connection on ICE I/O error callback
+      null-sink: Recalculate max_request and max_rewind while resuming sink
+      lirc: Fix module version
+      bluetooth: Fix device->adapter dependency while releasing discovery
+      build-sys: meson: change daemon-only to client
+      build-sys: meson: Move remaining tests under daemon and client builds
+      build-sys: meson: Rearrange dependencies under client and daemon options
+      build-sys: meson: Rearrange shell completion between daemon and client
+      build-sys: meson: Fix indentation in daemon/client blocks
+      build-sys: meson: Make glib and fftw common dependencies
+      thread-test: Increase test timeout
+      bluetooth: Limit effective SBC bitpool of incoming bluetooth connection
+      bluetooth: Make sure there is at least one SBC frame to encode
+      module-suspend-on-idle: Allow suspending a sink when the monitor source becomes idle
+      module-device-destore: Log restored port name
+      pa-info: Handle configuration files from .d directories
+      module-tunnel: Initialize `auto` param default value to false
+      bluetooth: mSBC: Decode packets larger than mSBC frame
+
+Jan Kuparinen (6):
+      Translated using Weblate (Finnish)
+      Translated using Weblate (Finnish)
+      Translated using Weblate (Finnish)
+      Translated using Weblate (Finnish)
+      Translated using Weblate (Finnish)
+      Translated using Weblate (Finnish)
+
+Jaroslav Kysela (5):
+      alsa: ucm - remove duplicate assignment
+      alsa: ucm - fix h/w mute mixer control probe
+      alsa: ucm - update the mixer path also after volume probe
+      alsa: mixer - more clever alias cache implementation
+      alsa: ucm - use possible mixer private device prefix for ELD controls
+
+Josef Haider (1):
+      alsa-profiles: Add NI Komplete Audio 6 MK2 profiles
+
+João Paulo Rechi Vita (11):
+      bluetooth: Keep a list of local adapters' UUIDs
+      bluetooth: backend-native: Rename profile to object in register_profile*
+      bluetooth: backend-native: Pass profile id in register_profile*
+      bluetooth: Add mechanism to track profile's status
+      bluetooth: backend-native: Keep track of profiles' status
+      bluetooth: Create PA_BLUETOOTH_HOOK_ADAPTER_UUIDS_CHANGED
+      bluetooth: backend-native: Handle RegisterProfile failure
+      bluetooth: Consider adapter UUIDs when evaluating profile support
+      bluetooth: Add debug logging to pa_bluetooth_device_supports_profile
+      bluetooth: Do not create a card profile for unsupported profiles
+      bluetooth: Add debug logging to profile creation
+
+Juho Hämäläinen (1):
+      bluetooth: Only remove cards belonging to the device.
+
+Karl Ove Hufthammer (4):
+      Translated using Weblate (Norwegian Nynorsk)
+      Translated using Weblate (Norwegian Nynorsk)
+      Translated using Weblate (Norwegian Nynorsk)
+      Translated using Weblate (Norwegian Nynorsk)
+
+Laurent Bigonville (2):
+      iochannel: Fix FTBFS on GNU/Hurd
+      util: Fix getting the binary name for GNU/Hurd
+
+Luna Jernberg (4):
+      Translated using Weblate (Swedish)
+      Translated using Weblate (Swedish)
+      Translated using Weblate (Swedish)
+      Translated using Weblate (Swedish)
+
+Lv Genggeng (1):
+      Translated using Weblate (Chinese (Simplified) (zh_CN))
+
+Marijn Suijten (19):
+      bt/bluez5-device: Update link to assigned Baseband numbers
+      bluetooth/native: Signal support for dock status in XAPL reply
+      bt/native: Answer AT command with ERROR if unhandled
+      bt/native: Parse specified number of arguments in IPHONEACCEV
+      bluetooth: Provide (HSP/HFP-received) battery level as device property
+      bluetooth: Register as BlueZ experimental BatteryProvider1
+      bluetooth: Deregister battery provider when profile disconnects
+      bluetooth/native: Accept and report battery HF indicator value
+      daemon/cmdline: Invert log-level list to match numerical values
+      bluetooth/native: Include util header for pa_msleep
+      gitlab-ci: Bump Ubuntu image to 20.04
+      gitlab-ci: Turn on Werror for meson builds
+      tests/mix-test: Don't pass unnecessary NULL fmt argument to fail_unless
+      pulsecore/shm: Remove shm_marker struct packing for pa_atomic_t fields
+      bluetooth/backend-native: Replace tab-indents with spaces
+      bluetooth/gst: Use GStreamer synchronously within PA's IO thread
+      bluetooth/gst: Replace buffer accumulation in adapter with direct pull
+      bluetooth/gst: Timestamp encoding buffers according to PA clock
+      bluetooth: Demote "No such property 'Volume'" error to warning
+
+Mart Raudsepp (2):
+      build-sys: meson: Relax sanity checks for daemonless builds
+      build-sys: meson: Allow building the daemon only
+
+Mathy Vanvoorden (2):
+      jackdbus-detect: Make it possible to disable sink or source
+      jackdbus-detect: Allow to configure multiple sinks/sources
+
+Olivier Gayot (1):
+      pactl: fix invalid JSON output by overriding LC_NUMERIC
+
+Ovari (1):
+      Translated using Weblate (Hungarian)
+
+Oğuz Ersen (6):
+      Translated using Weblate (Turkish)
+      Translated using Weblate (Turkish)
+      Translated using Weblate (Turkish)
+      Translated using Weblate (Turkish)
+      Translated using Weblate (Turkish)
+      Translated using Weblate (Turkish)
+
+Piotr Drąg (5):
+      Translated using Weblate (Polish)
+      Translated using Weblate (Polish)
+      Translated using Weblate (Polish)
+      Translated using Weblate (Polish)
+      Translated using Weblate (Polish)
+
+Rafael Fontenelle (1):
+      Translated using Weblate (Portuguese (Brazil))
+
+Rico Tzschichholz (1):
+      vala: Couple of libpulse binding fixes
+
+Sanchayan Maity (3):
+      rtp: Enable support for OPUS
+      bluetooth: ldac: Fix RTP payloading of encoded packet
+      bluetooth: Rename rtp_sbc_payload to rtp_payload
+
+Sebastian Reichel (1):
+      bluetooth: backend-native: add battery level reporting
+
+Sergey A (4):
+      Translated using Weblate (Russian)
+      Translated using Weblate (Russian)
+      Translated using Weblate (Russian)
+      Translated using Weblate (Russian)
+
+Sibo Dong (1):
+      shell-completion: bash: Localize word variable
+
+Sungjoon Moon (2):
+      Translated using Weblate (Korean)
+      Translated using Weblate (Korean)
+
+Takashi Sakamoto (1):
+      Revert "udev: use ID_MODEL/ID_VENDOR to give friendly name for FireWire devices"
+
+Takuro Onoue (1):
+      Translated using Weblate (Japanese)
+
+Tanu Kaskinen (8):
+      build-sys: Remove version number from the module path
+      i18n: Update .pot and .po files
+      i18n: Update .pot and .po files
+      alsa-mixer: Improve documentation in texas-instruments-pcm2902.conf
+      i18n: Update .pot and .po files
+      meson: Enable GStreamer-based RTP by default (when available)
+      alsa-mixer: Add analog-input path to TI PCM2902 mappings
+      i18n: Update .pot and .po files
+
+Temuri Doghonadze (1):
+      Added translation using Weblate (Georgian)
+
+Will Thompson (2):
+      CONTRIBUTING.md: fix typo
+      CONTRIBUTING.md: fix another typo
+
+Yuri Chornoivan (5):
+      Translated using Weblate (Ukrainian)
+      Translated using Weblate (Ukrainian)
+      Translated using Weblate (Ukrainian)
+      Translated using Weblate (Ukrainian)
+      Translated using Weblate (Ukrainian)
+
+acheronfail (1):
+      pactl: add format flag for JSON output
+
+baek inchan (1):
+      Translated using Weblate (Korean)
+
+guest271314 (1):
+      pacat: Include the special default device names in documentation
+
+liaohanqin (1):
+      pactl: optimized code
+
+simmon (5):
+      Translated using Weblate (Korean)
+      Translated using Weblate (Korean)
+      Translated using Weblate (Korean)
+      Translated using Weblate (Korean)
+      Translated using Weblate (Korean)
+
+simple (2):
+      alsa-mixer: Fix mono input for Texas Instruments PCM2902
+      alsa-mixer: Rename behringer-umc22.conf to texas-instruments-pcm2902.conf
+
+tensorknower69 (1):
+      fix a single typo in pulse-client.conf.5.xml.in
+
+김인수 (1):
+      Translated using Weblate (Korean)
 </pre>