Version 014 ~~~~~~~~~~~ Released: 2010-01-08 New Features: - Import the FreeBSD backend (Joe Marcus Clarke) Bugfixes: - Check if swap exists before determining how much is free (Debbie Beliveau) - Comment out some problematic compiler warnings (Joe Marcus Clarke) - Prevent segfault if connection to system dbus fails (Martin Koegler) - Fix segfault in the history code. Fixes fd#25632 (Richard Hughes) Version 013 ~~~~~~~~~~~ Released: 2009-12-07 Note: - The DBus interface of DeviceKit-power may be subject to change in future versions of this daemon. - This will probably be the last release of DeviceKit-power as the project has been renamed to upower. New Features: - When using devkit-power --monitor, print a timestamp before each message for debugging. Fixes fd#24666 (Richard Hughes) Bugfixes: - Update the list of HID UPS (Arnaud Quette) - Use a gdouble for percentage to fix on-battery reporting (Byron Clark) - Bug 24262 – incorrect battery recall warning for Lenovo T61 (Martin Pitt) - Fix the toshiba battery recal notices by matching up the double quotes (Richard Hughes) - Avoid going from discharging to pending-discharge when the expansion battery is very low (Richard Hughes) - Some vendors fill the NVRAM full of junk. Don't crash the daemon if the battery is broken. Fixes rh#533654 (Richard Hughes) - When the internal battery is in the unknown state, we can't make a decision whether the system is on battery power (Richard Hughes) - Some batteries give out massive rate values when nearly empty (Richard Hughes) Version 012 ~~~~~~~~~~~ Released: 2009-10-19 Note: - The DBus interface of DeviceKit-power may be subject to change in future versions of this daemon. New Features: - Detect encrypted swap and prevent hibernate in this case. Fixes fd#23196 (Richard Hughes) - Add g_object_notify() calls for properties on DkpClient (Richard Hughes) Bugfixes: - Ensure we only reset the update-time property when we have done the refresh, not before (Richard Hughes) - Don't emit changed events from the DkpBackend layer, instead push then through DkpDevice (Richard Hughes) - When we do a delayed refresh, actually do 5 x 1 second apart rather than 1 x 3 seconds (Richard Hughes) Version 011 ~~~~~~~~~~~ Released: 2009-10-06 Note: - The DBus interface of DeviceKit-power may be subject to change in future versions of this daemon. - The DBus interface has changed to use FirstLetterCaps property names so Qt projects can use the DBus interface without resorting to ugly hacks. New Features: - Return meaningful errors if the user tries to suspend or hibernate without kernel support or swap set up (Richard Hughes) - Use the sysfs file 'type' to work out the battery type before using a fallback (Enrico Zini, Richard Hughes) Bugfixes: - Update list of HID UPS devices (Arnaud Quette) - Add backend code to make DeviceKit-power compile without GUdev for non-Linux platforms (Richard Hughes) - Only disable the polling if the kernel tells us we're fully charged, not if we guessed it (Richard Hughes) - Make the remove logic much cleaner to try to fix bugs where removing the mouse kills the session (Richard Hughes) - Fix up some small memory leaks (Richard Hughes) - Freeze and thaw the device during initial coldplug (Richard Hughes) - Fix up a few potential problems spotted by clang (Richard Hughes) - Fix a tiny memory leak when we collect the properties from the interface multiple times (Richard Hughes) - Use voltage_now as a fallback to the design voltage (Enrico Zini, Richard Hughes) Version 010 ~~~~~~~~~~~ Released: 2009-07-22 Note: - The DBus interface of DeviceKit-power may be subject to change in future versions of this daemon. - This project now depends on GUdev and PolicyKit1 New Features: - Port to GUdev (Richard Hughes) - Port to PolicyKit1 (Richard Hughes) Bugfixes: - Add a notify flag to set_lid_is_closed to fix the initial state (Loïc Minier) - Correct a description string from one of the new enums (Richard Hughes) - Only guess the battery status if we have > 1 battery in the system (Richard Hughes) - Use the global battery state as a metric for single battery machines (Richard Hughes) - Query the kernel to decide if we have hibernate and suspend support (Richard Hughes) - If we don't have enough swap available, don't advertise hibernate. Fixes rh#513015 (Richard Hughes) - Force a refresh all battery devices when the ac-adaptor changes. Fixes rh#512995 (Richard Hughes) Version 009 ~~~~~~~~~~~ Released: 2009-07-06 Note: - The DBus interface of DeviceKit-power may be subject to change in future versions of this daemon. - The experimental devkit-power-gobject library has no API or ABI guarantees. - This is the first version of DeviceKit-power where multiple laptop batteries are officially supported. New Features: - Interface with pm-powersave as external vendors are using this (Richard Hughes) - Enable pretty compiler output with new automake versions (Richard Hughes) - udev rules files now live in /lib/udev/rules.d, not /etc/udev/rules.d (Richard Hughes) - Add battery recall data rules (Richard Hughes) - Export the recall-notice, recall-vendor and recall-url properties on power devices (Richard Hughes) - Protect the non-GObject accessors with DKP_DISABLE_DEPRECATED (Richard Hughes) - Add two new state enums, pending-discharge and pending-charge (Richard Hughes) - Use the global state to fix the unknown battery status (Richard Hughes) Bugfixes: - Suppress lid change event on startup (Martin Pitt) - Fix two issues with the pm-powersave code (Roland Dreier) - Mark batteries as empty if they have unknown state and a very low energy (Richard Hughes) - For power_supply, unknown is a valid state from the kernel (Richard Hughes) - Don't assume all batteries have positive energy_full values (Richard Hughes) - Add one more variation of lithium-poly (Richard Hughes) - Don't show empty vendor, model or serials in the debug outputs (Richard Hughes) - Fix a small memory leak on supply coldplugging (Richard Hughes) - Hardcode pm-powersave like we do pm-suspend and pm-hibernate (Richard Hughes) - Initial refresh after coldplug is not fatal if it fails (Richard Hughes) - Set the GObject properties correctly in the DkpDeviceHid class (Richard Hughes) - The UPS can't expose empty or fully-charged, so fixup these states (Richard Hughes) - Fix detecting the USB UPS devices (Richard Hughes) - Add a lid-is-present property (Richard Hughes) - Be less asserty when enum values are added in newer versions of the spec (Richard Hughes) - Add a DKP_CHECK_VERSION macro which we can use in client tools (Richard Hughes) - Move the udev rules to their own directory (Richard Hughes) - Move a small rule about the fully charged level from g-p-m (Richard Hughes) Version 008 ~~~~~~~~~~~ Released: 2009-06-01 Note: - The DBus interface of DeviceKit-power may be subject to change in future versions of this daemon. - The experimental devkit-power-gobject library has no API or ABI guarantees. New Features: - Allow the daemon to get the global online state for all devices (Matthew Garrett) - Add a has-capability to the org.freedesktop.DeviceKit.Power.Wakeups interface (Richard Hughes) - Add a property lid-is-closed for g-p-m and x-p-m to use (Richard Hughes) Bugfixes: - Fix up some issues in DkpClient, and expose GObject properties (Ali Abdallah) - Remove the 0x prefix from some rule matches (Ronald) - Allow all DBus properties to be read with the new DBus (Richard Hughes) - Only reset the update-time if the read was successful (Richard Hughes) - Optimise the udev rules to skip non-usb devices (Richard Hughes) - Ensure we get properties on devices correctly that have not yet been changed (Richard Hughes) - Make the suspend and hibernate scripts execute synchronously. Fixes rh#497563 (Richard Hughes) - Ignore method timeouts when we suspend and hibernate (Richard Hughes) - Add two missing files to the last commit (Richard Hughes) - Don't overwrite energy-full-design with zero after coldplug (Richard Hughes) - Only get the device state for the poll after the refresh (Richard Hughes) - Continue to poll when power supply device is marked unknown. Fixes rh#495493 (Richard Hughes) - Correct a debugging statement (Richard Hughes) - Never overwrite ID_PRODUCT or ID_VENDOR (Richard Hughes) - Don't return history data relative to the earliest point (Richard Hughes) - Setup different polls based on the battery state (Matthew Garrett) - Don't poll on unknown forever. Based on a patch from Matthew Garrett (Richard Hughes) - Fix up the return statuses from coldplug and refresh (Richard Hughes) - Only attempt to print history if the device is capable (Richard Hughes) - Allow properties in DkpDevice (client) to be set (Richard Hughes) Version 007 ~~~~~~~~~~~ Released: 2009-03-30 Note: - The DBus interface of DeviceKit-power may be subject to change in future versions of this daemon. - The experimental devkit-power-gobject library has no API or ABI guarantees. New Features: - Get rid of internal Object and instead use the GObject property system (Richard Hughes) - Move the library directory from libdevkit-power to devkit-power-gobject (Richard Hughes) - Ship a shared library. There are now three external projects using copies of this, which is rediculous (Richard Hughes) - Require I_KNOW_THE_DEVICEKIT_POWER_API_IS_SUBJECT_TO_CHANGE (Richard Hughes) Bugfixes: - Fix up DBus interface for CVE-2008-4311 (Stanislav Brabec) - Fix g-p-m and DeviceKit-power when running with a permissive dbus. Fixes fd#20882 (Frederic Crozat) - Remove use of EggObjList, and make the library more sane (Richard Hughes) - Fix compile error in dkp-power. Fixes #20749 (Richard Hughes) Version 006 ~~~~~~~~~~~ Released: 2009-02-10 Bugfixes: - Fix compile failure with gcc-4.4.0 and old versions of glib2 (Richard Hughes) - Only enable the wakeups polling if a client requires the data (Richard Hughes) - Correctly set the power-supply property (David Zeuthen) - Don't crash when we limit the resolution of a small dataset (Richard Hughes) - Don't sync to disk every 5 seconds, do it every 10 minutes (Richard Hughes) - Fix the QoS interface with the proper signature (Richard Hughes) Version 005 ~~~~~~~~~~~ Released: 2009-02-02 New Features: - Add a wakeups interface so we can get data from the system over DBus (Richard Hughes) - Allow showing the wakeup data in the devkit-power command line tool (Richard Hughes) Version 004 ~~~~~~~~~~~ Released: 2009-01-23 Bugfixes: - Fix the battery capacity calculation. Fixes fd#19165 (Richard Hughes) - Special case machines where the kernel does not convert charge to power (Richard Hughes) - Check all the power supply fields for valid data (Richard Hughes) Version 003 ~~~~~~~~~~~ Released: 2008-12-09 New Features: - Implement the .QoS interface -- still proof of concept (Richard Hughes) Bugfixes: - Enable the low power saving code in DkpHistory (Richard Hughes) - Don't keep putting off the profile saving in DkpHistory (Richard Hughes) - Allow DeviceKit-power to run with the 'fixed' DBus (Richard Hughes) Version 002 ~~~~~~~~~~~ Released: 2008-11-13 New Features: - add in CanSuspend and CanHibernate into API (Richard Hughes) - add two new properties, has-history and has-statistics (Richard Hughes) - add voltage property of a power device (Richard Hughes) - all logging for all the other device types too (Richard Hughes) - Move object paths so things are rooted under /org/freedesktop/DeviceKit/Power (David Zeuthen) - Add functionality to monitor a Watts Up Pro device (Richard Hughes) - Turn some methods into properties (David Zeuthen) Bugfixes: - Also rename configure.in to configure.ac in autogen.sh (David Zeuthen) - Fix up deps and build system (David Zeuthen) - We're a fd.o project (David Zeuthen) - Update my email address (David Zeuthen) - Update mailing list reference in man pages (David Zeuthen) - Update bug report URL to point to our mailing list (David Zeuthen) - Nuke devkit-power-on-battery for now (David Zeuthen) - Don't report negative rate when charging (Richard Hughes) - Remove the battery- and line-power- prefix from the device properties (Richard Hughes) - Add DkpStatsObj convenience helpers (Richard Hughes) - Save the time to full and time to empty too (Richard Hughes) - Don't clear the list when we print it (Richard Hughes) - Support getting stats from DkpSupply devices (Richard Hughes) - Poll every 10 seconds to get better stats results (Richard Hughes) - Work out the statistics by binning them into percentage sized holes (Richard Hughes) - Add two remove functions to the generic object list (Richard Hughes) - Don't unconditionally set the energy_full to energy_full_design if larger (Richard Hughes) - Add a first approximation of a time resolution limiter (Richard Hughes) - Expand the client helper library to cover all the base API for gnome-power-manager (Richard Hughes) - Use 0 for unknown, not -1 as some values like rate and voltage are valid when negative (Richard Hughes) - Use a better resolution limiting function for getting the history to reduce CPU load (Richard Hughes) - Match the WUP device on the tty device, not the USB device (Richard Hughes) - Fix the include headers for DeviceKit 002 (Richard Hughes) - Document how to access the D-Bus service with examples (David Zeuthen) Version 001 ~~~~~~~~~~~ Released: 2008-09-02 - Initial proof of concept version