/* * Copyright © 2014 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #include "brw_fs.h" #include "brw_cfg.h" #include "brw_eu.h" /** @file brw_fs_cmod_propagation.cpp * * Implements a pass that propagates the conditional modifier from a CMP x 0.0 * instruction into the instruction that generated x. For instance, in this * sequence * * add(8) g70<1>F g69<8,8,1>F 4096F * cmp.ge.f0(8) null g70<8,8,1>F 0F * * we can do the comparison as part of the ADD instruction directly: * * add.ge.f0(8) g70<1>F g69<8,8,1>F 4096F * * If there had been a use of the flag register and another CMP using g70 * * add.ge.f0(8) g70<1>F g69<8,8,1>F 4096F * (+f0) sel(8) g71 g72<8,8,1>F g73<8,8,1>F * cmp.ge.f0(8) null g70<8,8,1>F 0F * * we can recognize that the CMP is generating the flag value that already * exists and therefore remove the instruction. */ static bool cmod_propagate_cmp_to_add(const gen_device_info *devinfo, bblock_t *block, fs_inst *inst) { bool read_flag = false; foreach_inst_in_block_reverse_starting_from(fs_inst, scan_inst, inst) { if (scan_inst->opcode == BRW_OPCODE_ADD && !scan_inst->is_partial_write() && scan_inst->exec_size == inst->exec_size) { bool negate; /* A CMP is basically a subtraction. The result of the * subtraction must be the same as the result of the addition. * This means that one of the operands must be negated. So (a + * b) vs (a == -b) or (a + -b) vs (a == b). */ if ((inst->src[0].equals(scan_inst->src[0]) && inst->src[1].negative_equals(scan_inst->src[1])) || (inst->src[0].equals(scan_inst->src[1]) && inst->src[1].negative_equals(scan_inst->src[0]))) { negate = false; } else if ((inst->src[0].negative_equals(scan_inst->src[0]) && inst->src[1].equals(scan_inst->src[1])) || (inst->src[0].negative_equals(scan_inst->src[1]) && inst->src[1].equals(scan_inst->src[0]))) { negate = true; } else { goto not_match; } /* From the Sky Lake PRM Vol. 7 "Assigning Conditional Mods": * * * Note that the [post condition signal] bits generated at * the output of a compute are before the .sat. * * So we don't have to bail if scan_inst has saturate. */ /* Otherwise, try propagating the conditional. */ const enum brw_conditional_mod cond = negate ? brw_swap_cmod(inst->conditional_mod) : inst->conditional_mod; if (scan_inst->can_do_cmod() && ((!read_flag && scan_inst->conditional_mod == BRW_CONDITIONAL_NONE) || scan_inst->conditional_mod == cond)) { scan_inst->conditional_mod = cond; inst->remove(block); return true; } break; } not_match: if (scan_inst->flags_written()) break; read_flag = read_flag || scan_inst->flags_read(devinfo); } return false; } /** * Propagate conditional modifiers from NOT instructions * * Attempt to convert sequences like * * or(8) g78<8,8,1> g76<8,8,1>UD g77<8,8,1>UD * ... * not.nz.f0(8) null g78<8,8,1>UD * * into * * or.z.f0(8) g78<8,8,1> g76<8,8,1>UD g77<8,8,1>UD */ static bool cmod_propagate_not(const gen_device_info *devinfo, bblock_t *block, fs_inst *inst) { const enum brw_conditional_mod cond = brw_negate_cmod(inst->conditional_mod); bool read_flag = false; if (cond != BRW_CONDITIONAL_Z && cond != BRW_CONDITIONAL_NZ) return false; foreach_inst_in_block_reverse_starting_from(fs_inst, scan_inst, inst) { if (regions_overlap(scan_inst->dst, scan_inst->size_written, inst->src[0], inst->size_read(0))) { if (scan_inst->opcode != BRW_OPCODE_OR && scan_inst->opcode != BRW_OPCODE_AND) break; if (scan_inst->is_partial_write() || scan_inst->dst.offset != inst->src[0].offset || scan_inst->exec_size != inst->exec_size) break; if (scan_inst->can_do_cmod() && ((!read_flag && scan_inst->conditional_mod == BRW_CONDITIONAL_NONE) || scan_inst->conditional_mod == cond)) { scan_inst->conditional_mod = cond; inst->remove(block); return true; } break; } if (scan_inst->flags_written()) break; read_flag = read_flag || scan_inst->flags_read(devinfo); } return false; } static bool opt_cmod_propagation_local(const gen_device_info *devinfo, bblock_t *block) { bool progress = false; int ip = block->end_ip + 1; foreach_inst_in_block_reverse_safe(fs_inst, inst, block) { ip--; if ((inst->opcode != BRW_OPCODE_AND && inst->opcode != BRW_OPCODE_CMP && inst->opcode != BRW_OPCODE_MOV && inst->opcode != BRW_OPCODE_NOT) || inst->predicate != BRW_PREDICATE_NONE || !inst->dst.is_null() || (inst->src[0].file != VGRF && inst->src[0].file != ATTR && inst->src[0].file != UNIFORM)) continue; /* An ABS source modifier can only be handled when processing a compare * with a value other than zero. */ if (inst->src[0].abs && (inst->opcode != BRW_OPCODE_CMP || inst->src[1].is_zero())) continue; /* Only an AND.NZ can be propagated. Many AND.Z instructions are * generated (for ir_unop_not in fs_visitor::emit_bool_to_cond_code). * Propagating those would require inverting the condition on the CMP. * This changes both the flag value and the register destination of the * CMP. That result may be used elsewhere, so we can't change its value * on a whim. */ if (inst->opcode == BRW_OPCODE_AND && !(inst->src[1].is_one() && inst->conditional_mod == BRW_CONDITIONAL_NZ && !inst->src[0].negate)) continue; if (inst->opcode == BRW_OPCODE_MOV && inst->conditional_mod != BRW_CONDITIONAL_NZ) continue; /* A CMP with a second source of zero can match with anything. A CMP * with a second source that is not zero can only match with an ADD * instruction. * * Only apply this optimization to float-point sources. It can fail for * integers. For inputs a = 0x80000000, b = 4, int(0x80000000) < 4, but * int(0x80000000) - 4 overflows and results in 0x7ffffffc. that's not * less than zero, so the flags get set differently than for (a < b). */ if (inst->opcode == BRW_OPCODE_CMP && !inst->src[1].is_zero()) { if (brw_reg_type_is_floating_point(inst->src[0].type) && cmod_propagate_cmp_to_add(devinfo, block, inst)) progress = true; continue; } if (inst->opcode == BRW_OPCODE_NOT) { progress = cmod_propagate_not(devinfo, block, inst) || progress; continue; } bool read_flag = false; foreach_inst_in_block_reverse_starting_from(fs_inst, scan_inst, inst) { if (regions_overlap(scan_inst->dst, scan_inst->size_written, inst->src[0], inst->size_read(0))) { if (scan_inst->is_partial_write() || scan_inst->dst.offset != inst->src[0].offset || scan_inst->exec_size != inst->exec_size) break; /* CMP's result is the same regardless of dest type. */ if (inst->conditional_mod == BRW_CONDITIONAL_NZ && scan_inst->opcode == BRW_OPCODE_CMP && (inst->dst.type == BRW_REGISTER_TYPE_D || inst->dst.type == BRW_REGISTER_TYPE_UD)) { inst->remove(block); progress = true; break; } /* If the AND wasn't handled by the previous case, it isn't safe * to remove it. */ if (inst->opcode == BRW_OPCODE_AND) break; /* Comparisons operate differently for ints and floats */ if (scan_inst->dst.type != inst->dst.type && (scan_inst->dst.type == BRW_REGISTER_TYPE_F || inst->dst.type == BRW_REGISTER_TYPE_F)) break; /* If the instruction generating inst's source also wrote the * flag, and inst is doing a simple .nz comparison, then inst * is redundant - the appropriate value is already in the flag * register. Delete inst. */ if (inst->conditional_mod == BRW_CONDITIONAL_NZ && !inst->src[0].negate && scan_inst->flags_written()) { inst->remove(block); progress = true; break; } /* The conditional mod of the CMP/CMPN instructions behaves * specially because the flag output is not calculated from the * result of the instruction, but the other way around, which * means that even if the condmod to propagate and the condmod * from the CMP instruction are the same they will in general give * different results because they are evaluated based on different * inputs. */ if (scan_inst->opcode == BRW_OPCODE_CMP || scan_inst->opcode == BRW_OPCODE_CMPN) break; /* From the Sky Lake PRM Vol. 7 "Assigning Conditional Mods": * * * Note that the [post condition signal] bits generated at * the output of a compute are before the .sat. */ if (scan_inst->saturate) break; /* From the Sky Lake PRM, Vol 2a, "Multiply": * * "When multiplying integer data types, if one of the sources * is a DW, the resulting full precision data is stored in * the accumulator. However, if the destination data type is * either W or DW, the low bits of the result are written to * the destination register and the remaining high bits are * discarded. This results in undefined Overflow and Sign * flags. Therefore, conditional modifiers and saturation * (.sat) cannot be used in this case." * * We just disallow cmod propagation on all integer multiplies. */ if (!brw_reg_type_is_floating_point(scan_inst->dst.type) && scan_inst->opcode == BRW_OPCODE_MUL) break; /* Otherwise, try propagating the conditional. */ enum brw_conditional_mod cond = inst->src[0].negate ? brw_swap_cmod(inst->conditional_mod) : inst->conditional_mod; if (scan_inst->can_do_cmod() && ((!read_flag && scan_inst->conditional_mod == BRW_CONDITIONAL_NONE) || scan_inst->conditional_mod == cond)) { scan_inst->conditional_mod = cond; inst->remove(block); progress = true; } break; } if (scan_inst->flags_written()) break; read_flag = read_flag || scan_inst->flags_read(devinfo); } } return progress; } bool fs_visitor::opt_cmod_propagation() { bool progress = false; foreach_block_reverse(block, cfg) { progress = opt_cmod_propagation_local(devinfo, block) || progress; } if (progress) invalidate_live_intervals(); return progress; }