Gallium LLVMpipe Driver ======================= Introduction ------------ The Gallium llvmpipe driver is a software rasterizer that uses LLVM to do runtime code generation. Shaders, point/line/triangle rasterization and vertex processing are implemented with LLVM IR which is translated to x86, x86-64, or ppc64le machine code. Also, the driver is multithreaded to take advantage of multiple CPU cores (up to 8 at this time). It's the fastest software rasterizer for Mesa. Requirements ------------ - For x86 or amd64 processors, 64-bit mode is recommended. Support for SSE2 is strongly encouraged. Support for SSE3 and SSE4.1 will yield the most efficient code. The fewer features the CPU has the more likely it is that you will run into underperforming, buggy, or incomplete code. For ppc64le processors, use of the Altivec feature (the Vector Facility) is recommended if supported; use of the VSX feature (the Vector-Scalar Facility) is recommended if supported AND Mesa is built with LLVM version 4.0 or later. See ``/proc/cpuinfo`` to know what your CPU supports. - Unless otherwise stated, LLVM version 3.4 is recommended; 3.3 or later is required. For Linux, on a recent Debian based distribution do: .. code-block:: console aptitude install llvm-dev If you want development snapshot builds of LLVM for Debian and derived distributions like Ubuntu, you can use the APT repository at `apt.llvm.org `__, which are maintained by Debian's LLVM maintainer. For a RPM-based distribution do: .. code-block:: console yum install llvm-devel For Windows you will need to build LLVM from source with MSVC or MINGW (either natively or through cross compilers) and CMake, and set the ``LLVM`` environment variable to the directory you installed it to. LLVM will be statically linked, so when building on MSVC it needs to be built with a matching CRT as Mesa, and you'll need to pass ``-DLLVM_USE_CRT_xxx=yyy`` as described below. +-----------------+----------------------------------------------------------------+ | LLVM build-type | Mesa build-type | | +--------------------------------+-------------------------------+ | | debug,checked | release,profile | +=================+================================+===============================+ | Debug | ``-DLLVM_USE_CRT_DEBUG=MTd`` | ``-DLLVM_USE_CRT_DEBUG=MT`` | +-----------------+--------------------------------+-------------------------------+ | Release | ``-DLLVM_USE_CRT_RELEASE=MTd`` | ``-DLLVM_USE_CRT_RELEASE=MT`` | +-----------------+--------------------------------+-------------------------------+ You can build only the x86 target by passing ``-DLLVM_TARGETS_TO_BUILD=X86`` to cmake. - scons (optional) Building -------- To build everything on Linux invoke scons as: .. code-block:: console scons build=debug libgl-xlib Alternatively, you can build it with meson with: .. code-block:: console mkdir build cd build meson -D glx=gallium-xlib -D gallium-drivers=swrast ninja but the rest of these instructions assume that scons is used. For Windows the procedure is similar except the target: .. code-block:: console scons platform=windows build=debug libgl-gdi Using ----- Linux ~~~~~ On Linux, building will create a drop-in alternative for ``libGL.so`` into :: build/foo/gallium/targets/libgl-xlib/libGL.so or :: lib/gallium/libGL.so To use it set the ``LD_LIBRARY_PATH`` environment variable accordingly. For performance evaluation pass ``build=release`` to scons, and use the corresponding lib directory without the ``-debug`` suffix. Windows ~~~~~~~ On Windows, building will create ``build/windows-x86-debug/gallium/targets/libgl-gdi/opengl32.dll`` which is a drop-in alternative for system's ``opengl32.dll``. To use it put it in the same directory as your application. It can also be used by replacing the native ICD driver, but it's quite an advanced usage, so if you need to ask, don't even try it. There is however an easy way to replace the OpenGL software renderer that comes with Microsoft Windows 7 (or later) with llvmpipe (that is, on systems without any OpenGL drivers): - copy ``build/windows-x86-debug/gallium/targets/libgl-gdi/opengl32.dll`` to ``C:\Windows\SysWOW64\mesadrv.dll`` - load this registry settings: :: REGEDIT4 ; https://technet.microsoft.com/en-us/library/cc749368.aspx ; https://www.msfn.org/board/topic/143241-portable-windows-7-build-from-winpe-30/page-5#entry942596 [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion\OpenGLDrivers\MSOGL] "DLL"="mesadrv.dll" "DriverVersion"=dword:00000001 "Flags"=dword:00000001 "Version"=dword:00000002 - Ditto for 64 bits drivers if you need them. Profiling --------- To profile llvmpipe you should build as :: scons build=profile This will ensure that frame pointers are used both in C and JIT functions, and that no tail call optimizations are done by gcc. Linux perf integration ~~~~~~~~~~~~~~~~~~~~~~ On Linux, it is possible to have symbol resolution of JIT code with `Linux perf `__: :: perf record -g /my/application perf report When run inside Linux perf, llvmpipe will create a ``/tmp/perf-XXXXX.map`` file with symbol address table. It also dumps assembly code to ``/tmp/perf-XXXXX.map.asm``, which can be used by the ``bin/perf-annotate-jit.py`` script to produce disassembly of the generated code annotated with the samples. You can obtain a call graph via `Gprof2Dot `__. Unit testing ------------ Building will also create several unit tests in ``build/linux-???-debug/gallium/drivers/llvmpipe``: - ``lp_test_blend``: blending - ``lp_test_conv``: SIMD vector conversion - ``lp_test_format``: pixel unpacking/packing Some of these tests can output results and benchmarks to a tab-separated file for later analysis, e.g.: :: build/linux-x86_64-debug/gallium/drivers/llvmpipe/lp_test_blend -o blend.tsv Development Notes ----------------- - When looking at this code for the first time, start in lp_state_fs.c, and then skim through the ``lp_bld_*`` functions called there, and the comments at the top of the ``lp_bld_*.c`` functions. - The driver-independent parts of the LLVM / Gallium code are found in ``src/gallium/auxiliary/gallivm/``. The filenames and function prefixes need to be renamed from ``lp_bld_`` to something else though. - We use LLVM-C bindings for now. They are not documented, but follow the C++ interfaces very closely, and appear to be complete enough for code generation. See `this stand-alone example `__. See the ``llvm-c/Core.h`` file for reference. .. _recommended_reading: Recommended Reading ------------------- - Rasterization - `Triangle Scan Conversion using 2D Homogeneous Coordinates `__ - `Rasterization on Larrabee `__ (`DevMaster copy `__) - `Rasterization using half-space functions `__ - `Advanced Rasterization `__ - `Optimizing Software Occlusion Culling `__ - Texture sampling - `Perspective Texture Mapping `__ - `Texturing As In Unreal `__ - `Run-Time MIP-Map Filtering `__ - `Will "brilinear" filtering persist? `__ - `Trilinear filtering `__ - `Texture Swizzling `__ - SIMD - `Whole-Function Vectorization `__ - Optimization - `Optimizing Pixomatic For Modern x86 Processors `__ - `Intel 64 and IA-32 Architectures Optimization Reference Manual `__ - `Software optimization resources `__ - `Intel Intrinsics Guide `__ - LLVM - `LLVM Language Reference Manual `__ - `The secret of LLVM C bindings `__ - General - `A trip through the Graphics Pipeline `__ - `WARP Architecture and Performance `__