1 files changed, 0 insertions, 124 deletions
diff --git a/docs/README.D3D b/docs/README.D3D
deleted file mode 100644
index b41fcb62085..00000000000
--- a/docs/README.D3D
+++ /dev/null
@@ -1,124 +0,0 @@
-
-                     DirectX 6 Driver for Mesa 3.0
-
-
-This software is distributed under the terms of the GNU Library
-General Public License, see the LICENSE file for details.
-
-
-
-What do you need ?
-------------------
-
-	- A PC with a DirectX 6 video driver installed.
-
-	- Mesa 3.0
-
-	- The 3Dfx Glide library 2.3 or later for your OS (the 2.4 works fine).
-	  The Voodoo2 requires the Glide library 2.51. The Glide 3.0 is not
-	  compatible with the Glide 2.x so it doesn't work with the current
-	  version of the driver;
-
-	- Visual C++ 5.0 is only compiler test but others should be ok with
-       changes to the makefiles (CFLAGS/LFLAGS).
-
-	- DirectX 6 SDK (was a MS download but not sure if still available).
-
-	- SoftIce or another debugger that will get DPF's is nice.
-
-
-Tested on:
-----------
-	Windows 95
-  	Windows 98
-	Windows NT 5.0 (beta 2)
-
-
-What is able to do ?
---------------------
-
-	- the driver will try and use DirectX to rasterize the OpenGL primitives
-	that are sent to the driver.  The driver will fall back to SW  if the rendering 
-	context is too big.  The fallback to SW still uses DirectDraw.  If the driver
-	fails to support and operation (accum, stencil, etc) then it will try and get
-	Mesa to render it in SW.  DirectX 6 features that are unsupported by the 
-	installed DirectX 6 driver will be mapped to some other best fit feature.
-
-
-How to compile:
----------------
-
-	These instructions assume you have Visual C++ installed.
-
-	  You might need to increase you enviroment space.  You can do this by 
-	adding the following statement to you config.sys.
-
-	shell=C:\COMMAND.COM C:\ /p /e:8198
-
-	  Next setup you compiler enviroment by running vcvars32.bat in the Visual C++
- 	'bin' directoy.
-
-	c:\DevStudio\VC\bin\vcvars32.bat
-
-	  Modify the D3D makefile to point at your SDK install.  Example has the SDK
-	installed on my 'f' drive in the root.
-
-	file: \Mesa-3.0\src\makefile.d3d
-
-	SDKROOT=f:\mssdk
-
-	  Now you can simply make the project.  If you look in the makefile you can see
-	I have some different targets like 'install'.  
-
-	nmake /f makefile.d3d
-
-
-FAQ:
-----
-
-	1) I don't think the driver is using my DirectX driver.
-
- 	  This maybe true as the current version will only select the Primary D3D driver
-	installed.  If you 3D card is the secondary (3dfx) then your out of luck for this
-	release.
-
-	2) The driver seems like its not HW accelerated.
-
-	  If you have a video card with limited memory then you might want to try and 
-	change your destop resolution to a low setting (640x480x16) so that the 3D part
-	of the card has more resources.  Remeber the driver can't make the card better...
-
-	3) Nothing works.
-
-	  Make sure you have a DirectX '6' driver installed.  Check you driver docs for this
-	info or use the SDK info utilities.
-	  The final 'dll' is named opengl32.dll and is either in the same directory as the 
-	OpenGL program or in your system directory (x:\windows\system or x:\winnt\system32).
-	  Check your destop resolution.  Most DirectX 6 drivers will only support 16bit and
-	32bit color depth.  To find out for sure you can check the DirectX Info Viewer in
-	the SDK.
-	  
-
-	4) Rendering doesn't look right.
-
-	  Sometimes this is because the card doesn't support a feature that that is required.
-	This is usually due to unsupported alpha functions (test/blend) or texture mapping.
-	Some cards suffer from too small of an alpha channel.  The driver does its best to
-	fallback on unsupported features.  This is not to say the driver may not have a bug(s).
-
-	5) Textures look bad.
-
-	  No mipmapping in this release.
-
-
-Thanks to:
-----------
-
-Brian Paul
-
-
-
-
-Leigh McRae (leigh@altsoftware.com)
-February 9, 1999
-