path: root/svx/source/sdr/contact/viewcontactofe3dscene.cxx

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <svx/sdr/contact/viewcontactofe3dscene.hxx>
#include <svx/sdr/contact/displayinfo.hxx>
#include <svx/sdr/contact/viewobjectcontact.hxx>
#include <basegfx/polygon/b2dpolygontools.hxx>
#include <basegfx/color/bcolor.hxx>
#include <drawinglayer/primitive2d/polygonprimitive2d.hxx>
#include <svx/sdr/primitive2d/sdrattributecreator.hxx>
#include <sdr/contact/viewobjectcontactofe3dscene.hxx>
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <basegfx/range/b3drange.hxx>
#include <drawinglayer/primitive3d/baseprimitive3d.hxx>
#include <svx/sdr/contact/viewcontactofe3d.hxx>
#include <drawinglayer/primitive2d/sceneprimitive2d.hxx>
#include <drawinglayer/primitive3d/transformprimitive3d.hxx>
#include <drawinglayer/primitive2d/sdrdecompositiontools2d.hxx>

using namespace com::sun::star;

namespace {

// pActiveVC is only true if ghosted is still activated and maybe needs to be switched off in this path
void createSubPrimitive3DVector(
    const sdr::contact::ViewContact& rCandidate,
    drawinglayer::primitive3d::Primitive3DContainer& o_rAllTarget,
    drawinglayer::primitive3d::Primitive3DContainer* o_pVisibleTarget,
    const SdrLayerIDSet* pVisibleSdrLayerIDSet,
    const bool bTestSelectedVisibility)
{
    const sdr::contact::ViewContactOfE3dScene* pViewContactOfE3dScene = dynamic_cast< const sdr::contact::ViewContactOfE3dScene* >(&rCandidate);

    if(pViewContactOfE3dScene)
    {
        const sal_uInt32 nChildrenCount(rCandidate.GetObjectCount());

        if(nChildrenCount)
        {
            // provide new collection sequences
            drawinglayer::primitive3d::Primitive3DContainer aNewAllTarget;
            drawinglayer::primitive3d::Primitive3DContainer aNewVisibleTarget;

            // add children recursively
            for(sal_uInt32 a(0); a < nChildrenCount; a++)
            {
                createSubPrimitive3DVector(
                    rCandidate.GetViewContact(a),
                    aNewAllTarget,
                    o_pVisibleTarget ? &aNewVisibleTarget : nullptr,
                    pVisibleSdrLayerIDSet,
                    bTestSelectedVisibility);
            }

            // create transform primitive for the created content combining content and transformtion
            const drawinglayer::primitive3d::Primitive3DReference xReference(new drawinglayer::primitive3d::TransformPrimitive3D(
                pViewContactOfE3dScene->GetE3dScene().GetTransform(),
                aNewAllTarget));

            // add created content to all target
            o_rAllTarget.push_back(xReference);

            // add created content to visible target if exists
            if(o_pVisibleTarget)
            {
                o_pVisibleTarget->push_back(xReference);
            }
        }
    }
    else
    {
        // access view independent representation of rCandidate
        const sdr::contact::ViewContactOfE3d* pViewContactOfE3d = dynamic_cast< const sdr::contact::ViewContactOfE3d* >(&rCandidate);

        if(pViewContactOfE3d)
        {
            drawinglayer::primitive3d::Primitive3DContainer xPrimitive3DSeq(pViewContactOfE3d->getViewIndependentPrimitive3DContainer());

            if(!xPrimitive3DSeq.empty())
            {
                // add to all target vector
                o_rAllTarget.append(xPrimitive3DSeq);

                if(o_pVisibleTarget)
                {
                    // test visibility. Primitive is visible when both tests are true (AND)
                    bool bVisible(true);

                    if(pVisibleSdrLayerIDSet)
                    {
                        // test layer visibility
                        const E3dObject& rE3dObject = pViewContactOfE3d->GetE3dObject();
                        const SdrLayerID aLayerID(rE3dObject.GetLayer());

                        bVisible = pVisibleSdrLayerIDSet->IsSet(aLayerID);
                    }

                    if(bVisible && bTestSelectedVisibility)
                    {
                        // test selected visibility (see 3D View's DrawMarkedObj implementation)
                        const E3dObject& rE3dObject = pViewContactOfE3d->GetE3dObject();

                        bVisible = rE3dObject.GetSelected();
                    }

                    if(bVisible && o_pVisibleTarget)
                    {
                        // add to visible target vector
                        o_pVisibleTarget->append(xPrimitive3DSeq);
                    }
                }
            }
        }
    }
}

}

namespace sdr { namespace contact {

// Create a Object-Specific ViewObjectContact, set ViewContact and
// ObjectContact. Always needs to return something.
ViewObjectContact& ViewContactOfE3dScene::CreateObjectSpecificViewObjectContact(ObjectContact& rObjectContact)
{
    ViewObjectContact* pRetval = new ViewObjectContactOfE3dScene(rObjectContact, *this);
    DBG_ASSERT(pRetval, "ViewContactOfE3dScene::CreateObjectSpecificViewObjectContact() failed (!)");

    return *pRetval;
}

ViewContactOfE3dScene::ViewContactOfE3dScene(E3dScene& rScene)
:   ViewContactOfSdrObj(rScene),
    maViewInformation3D(),
    maObjectTransformation(),
    maSdrSceneAttribute(),
    maSdrLightingAttribute()
{
}

void ViewContactOfE3dScene::createViewInformation3D(const basegfx::B3DRange& rContentRange)
{
    basegfx::B3DHomMatrix aTransformation;
    basegfx::B3DHomMatrix aOrientation;
    basegfx::B3DHomMatrix aProjection;
    basegfx::B3DHomMatrix aDeviceToView;

    // create transformation (scene as group's transformation)
    // For historical reasons, the outmost scene's transformation is handles as part of the
    // view transformation. This means that the BoundRect of the contained 3D Objects is
    // without that transformation and makes it necessary to NOT add the first scene to the
    // Primitive3DContainer of contained objects.
    {
        aTransformation = GetE3dScene().GetTransform();
    }

    // create orientation (world to camera coordinate system)
    {
        // calculate orientation from VRP, VPN and VUV
        const B3dCamera& rSceneCamera = GetE3dScene().GetCameraSet();
        const basegfx::B3DPoint& aVRP(rSceneCamera.GetVRP());
        const basegfx::B3DVector& aVPN(rSceneCamera.GetVPN());
        const basegfx::B3DVector& aVUV(rSceneCamera.GetVUV());

        aOrientation.orientation(aVRP, aVPN, aVUV);
    }

    // create projection (camera coordinate system to relative 2d where X,Y and Z are [0.0 .. 1.0])
    {
        const basegfx::B3DHomMatrix aWorldToCamera(aOrientation * aTransformation);
        basegfx::B3DRange aCameraRange(rContentRange);
        aCameraRange.transform(aWorldToCamera);

        // remember Z-Values, but change orientation
        const double fMinZ(-aCameraRange.getMaxZ());
        const double fMaxZ(-aCameraRange.getMinZ());

        // construct temporary matrix from world to device. Use unit values here to measure expansion
        basegfx::B3DHomMatrix aWorldToDevice(aWorldToCamera);
        const drawinglayer::attribute::SdrSceneAttribute& rSdrSceneAttribute = getSdrSceneAttribute();

        if(css::drawing::ProjectionMode_PERSPECTIVE == rSdrSceneAttribute.getProjectionMode())
        {
            aWorldToDevice.frustum(-1.0, 1.0, -1.0, 1.0, fMinZ, fMaxZ);
        }
        else
        {
            aWorldToDevice.ortho(-1.0, 1.0, -1.0, 1.0, fMinZ, fMaxZ);
        }

        // create B3DRange in device. This will create the real used ranges
        // in camera space. Do not use the Z-Values, though.
        basegfx::B3DRange aDeviceRange(rContentRange);
        aDeviceRange.transform(aWorldToDevice);

        // set projection
        if(css::drawing::ProjectionMode_PERSPECTIVE == rSdrSceneAttribute.getProjectionMode())
        {
            aProjection.frustum(
                aDeviceRange.getMinX(), aDeviceRange.getMaxX(),
                aDeviceRange.getMinY(), aDeviceRange.getMaxY(),
                fMinZ, fMaxZ);
        }
        else
        {
            aProjection.ortho(
                aDeviceRange.getMinX(), aDeviceRange.getMaxX(),
                aDeviceRange.getMinY(), aDeviceRange.getMaxY(),
                fMinZ, fMaxZ);
        }
    }

    // create device to view transform
    {
        // create standard deviceToView projection for geometry
        // input is [-1.0 .. 1.0] in X,Y and Z. bring to [0.0 .. 1.0]. Also
        // necessary to flip Y due to screen orientation
        // Z is not needed, but will also be brought to [0.0 .. 1.0]
        aDeviceToView.scale(0.5, -0.5, 0.5);
        aDeviceToView.translate(0.5, 0.5, 0.5);
    }

    const uno::Sequence< beans::PropertyValue > aEmptyProperties;
    maViewInformation3D = drawinglayer::geometry::ViewInformation3D(
        aTransformation, aOrientation, aProjection,
        aDeviceToView, 0.0, aEmptyProperties);
}

void ViewContactOfE3dScene::createObjectTransformation()
{
    // create 2d Object Transformation from relative point in 2d scene to world
    const tools::Rectangle aRectangle(GetE3dScene().GetSnapRect());

    maObjectTransformation.set(0, 0, aRectangle.getWidth());
    maObjectTransformation.set(1, 1, aRectangle.getHeight());
    maObjectTransformation.set(0, 2, aRectangle.Left());
    maObjectTransformation.set(1, 2, aRectangle.Top());
}

void ViewContactOfE3dScene::createSdrSceneAttribute()
{
    const SfxItemSet& rItemSet = GetE3dScene().GetMergedItemSet();
    maSdrSceneAttribute = drawinglayer::primitive2d::createNewSdrSceneAttribute(rItemSet);
}

void ViewContactOfE3dScene::createSdrLightingAttribute()
{
    const SfxItemSet& rItemSet = GetE3dScene().GetMergedItemSet();
    maSdrLightingAttribute = drawinglayer::primitive2d::createNewSdrLightingAttribute(rItemSet);
}

drawinglayer::primitive2d::Primitive2DContainer ViewContactOfE3dScene::createScenePrimitive2DSequence(
    const SdrLayerIDSet* pLayerVisibility) const
{
    drawinglayer::primitive2d::Primitive2DContainer xRetval;
    const sal_uInt32 nChildrenCount(GetObjectCount());

    if(nChildrenCount)
    {
        // create 3d scene primitive with visible content tested against rLayerVisibility
        drawinglayer::primitive3d::Primitive3DContainer aAllSequence;
        drawinglayer::primitive3d::Primitive3DContainer aVisibleSequence;
        const bool bTestLayerVisibility(nullptr != pLayerVisibility);
        const bool bTestSelectedVisibility(GetE3dScene().GetDrawOnlySelected());
        const bool bTestVisibility(bTestLayerVisibility || bTestSelectedVisibility);

        // add children recursively. Do NOT start with (*this), this would create
        // a 3D transformPrimitive for the start scene. While this is theoretically not
        // a bad thing, for historical reasons the transformation of the outmost scene
        // is seen as part of the ViewTransformation (see text in createViewInformation3D)
        for(sal_uInt32 a(0); a < nChildrenCount; a++)
        {
            createSubPrimitive3DVector(
                GetViewContact(a),
                aAllSequence,
                bTestLayerVisibility ? &aVisibleSequence : nullptr,
                bTestLayerVisibility ? pLayerVisibility : nullptr,
                bTestSelectedVisibility);
        }

        const size_t nAllSize(!aAllSequence.empty() ? aAllSequence.size() : 0);
        const size_t nVisibleSize(!aVisibleSequence.empty() ? aVisibleSequence.size() : 0);

        if((bTestVisibility && nVisibleSize) || nAllSize)
        {
            // for getting the 3D range using getB3DRangeFromPrimitive3DContainer a ViewInformation3D
            // needs to be given for evtl. decompositions. At the same time createViewInformation3D
            // currently is based on creating the target-ViewInformation3D using a given range. To
            // get the true range, use a neutral ViewInformation3D here. This leaves all matrices
            // on identity and the time on 0.0.
            const uno::Sequence< beans::PropertyValue > aEmptyProperties;
            const drawinglayer::geometry::ViewInformation3D aNeutralViewInformation3D(aEmptyProperties);
            const basegfx::B3DRange aContentRange(aAllSequence.getB3DRange(aNeutralViewInformation3D));

            // create 2d primitive 3dscene with generated sub-list from collector
            const drawinglayer::primitive2d::Primitive2DReference xReference(
                new drawinglayer::primitive2d::ScenePrimitive2D(
                    bTestVisibility ? aVisibleSequence : aAllSequence,
                    getSdrSceneAttribute(),
                    getSdrLightingAttribute(),
                    getObjectTransformation(),
                    getViewInformation3D(aContentRange)));

            xRetval = drawinglayer::primitive2d::Primitive2DContainer{ xReference };
        }
    }

    // always append an invisible outline for the cases where no visible content exists
    xRetval.push_back(
        drawinglayer::primitive2d::createHiddenGeometryPrimitives2D(
            getObjectTransformation()));

    return xRetval;
}

drawinglayer::primitive2d::Primitive2DContainer ViewContactOfE3dScene::createViewIndependentPrimitive2DSequence() const
{
    drawinglayer::primitive2d::Primitive2DContainer xRetval;

    if(GetObjectCount())
    {
        // create a default ScenePrimitive2D (without visibility test of members)
        xRetval = createScenePrimitive2DSequence(nullptr);
    }

    return xRetval;
}

void ViewContactOfE3dScene::ActionChanged()
{
    // call parent
    ViewContactOfSdrObj::ActionChanged();

    // mark locally cached values as invalid
    maViewInformation3D = drawinglayer::geometry::ViewInformation3D();
    maObjectTransformation.identity();
    maSdrSceneAttribute = drawinglayer::attribute::SdrSceneAttribute();
    maSdrLightingAttribute = drawinglayer::attribute::SdrLightingAttribute();
}

const drawinglayer::geometry::ViewInformation3D& ViewContactOfE3dScene::getViewInformation3D() const
{
    if(maViewInformation3D.isDefault())
    {
        // this version will create the content range on demand locally and thus is less
        // performant than the other one. Since the information is buffered the planned
        // behaviour is that the version with the given range is used initially.
        basegfx::B3DRange aContentRange(getAllContentRange3D());

        if(aContentRange.isEmpty())
        {
            // empty scene, no 3d action should be necessary. Prepare some
            // fallback size
            OSL_FAIL("No need to get ViewInformation3D from an empty scene (!)");
            aContentRange.expand(basegfx::B3DPoint(-100.0, -100.0, -100.0));
            aContentRange.expand(basegfx::B3DPoint( 100.0,  100.0,  100.0));
        }

        const_cast < ViewContactOfE3dScene* >(this)->createViewInformation3D(aContentRange);
    }

    return maViewInformation3D;
}

const drawinglayer::geometry::ViewInformation3D& ViewContactOfE3dScene::getViewInformation3D(const basegfx::B3DRange& rContentRange) const
{
    if(maViewInformation3D.isDefault())
    {
        const_cast < ViewContactOfE3dScene* >(this)->createViewInformation3D(rContentRange);
    }

    return maViewInformation3D;
}

const basegfx::B2DHomMatrix& ViewContactOfE3dScene::getObjectTransformation() const
{
    if(maObjectTransformation.isIdentity())
    {
        const_cast < ViewContactOfE3dScene* >(this)->createObjectTransformation();
    }

    return maObjectTransformation;
}

const drawinglayer::attribute::SdrSceneAttribute& ViewContactOfE3dScene::getSdrSceneAttribute() const
{
    if(maSdrSceneAttribute.isDefault())
    {
        const_cast < ViewContactOfE3dScene* >(this)->createSdrSceneAttribute();
    }

    return maSdrSceneAttribute;
}

const drawinglayer::attribute::SdrLightingAttribute& ViewContactOfE3dScene::getSdrLightingAttribute() const
{
    if(maSdrLightingAttribute.isDefault())
    {
        const_cast < ViewContactOfE3dScene* >(this)->createSdrLightingAttribute();
    }

    return maSdrLightingAttribute;
}

drawinglayer::primitive3d::Primitive3DContainer ViewContactOfE3dScene::getAllPrimitive3DContainer() const
{
    drawinglayer::primitive3d::Primitive3DContainer aAllPrimitive3DContainer;
    const sal_uInt32 nChildrenCount(GetObjectCount());

    // add children recursively. Do NOT start with (*this), this would create
    // a 3D transformPrimitive for the start scene. While this is theoretically not
    // a bad thing, for historical reasons the transformation of the outmost scene
    // is seen as part of the ViewTransformation (see text in createViewInformation3D)
    for(sal_uInt32 a(0); a < nChildrenCount; a++)
    {
        createSubPrimitive3DVector(GetViewContact(a), aAllPrimitive3DContainer, nullptr, nullptr, false);
    }

    return aAllPrimitive3DContainer;
}

basegfx::B3DRange ViewContactOfE3dScene::getAllContentRange3D() const
{
    const drawinglayer::primitive3d::Primitive3DContainer xAllSequence(getAllPrimitive3DContainer());
    basegfx::B3DRange aAllContentRange3D;

    if(!xAllSequence.empty())
    {
        // for getting the 3D range using getB3DRangeFromPrimitive3DContainer a ViewInformation3D
        // needs to be given for evtl. decompositions. Use a neutral ViewInformation3D here. This
        // leaves all matrices on identity and the time on 0.0.
        const uno::Sequence< beans::PropertyValue > aEmptyProperties;
        const drawinglayer::geometry::ViewInformation3D aNeutralViewInformation3D(aEmptyProperties);

        aAllContentRange3D = xAllSequence.getB3DRange(aNeutralViewInformation3D);
    }

    return aAllContentRange3D;
}

}}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */