path: root/psprint_config/configuration/ppds/LEX4039P.PS

*PPD-Adobe: "4.1"
*% Adobe PostScript(R) Printer Description File
*% For Lexmark 4039 LaserPrinter plus
*% Produced by Lexmark International, Inc.
*%
*% Copyright (c) 1993-1998 Lexmark International Inc.  All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the content
*% of the file is not altered in any way from its original form.
*%
*%
*% WARNING:  If you want to edit this PPD file and use it with Aldus
*%           PageMaker, be sure to use an editor (such as DOS Edit)
*%           that does NOT add an end-of-file marker (hex 1A) when
*%           it stores the file.
*%
*%

*FormatVersion: "4.1"
*FileVersion: "1.1"
*LanguageVersion: English
*PCFileName: "LEX4039P.PPD"
*Product: "(Lexmark 4039 LaserPrinter plus)"
*PSVersion: ""
*ModelName: "Lexmark 4039 LaserPrinter plus"
*ShortNickName: "Lexmark 4039 plus PS"
*NickName: "Lexmark 4039 plus PS"

*% === Options and Constraints ============

*OpenGroup: InstallableOptions/Options Installed

*OpenUI *Option1/Duplex - Option: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
*CloseUI: *Option1

*OpenUI *Option2/Lower Tray - Option: Boolean
*DefaultOption2: False
*Option2 True/Installed: ""
*Option2 False/Not Installed: ""
*CloseUI: *Option2

*OpenUI *Option3/Envelope Feeder - Option: Boolean
*DefaultOption3: False
*Option3 True/Installed: ""
*Option3 False/Not Installed: ""
*CloseUI: *Option3

*OpenUI *Option4/Flash Memory Card - Option: Boolean
*DefaultOption4: False
*Option4 True/Installed: ""
*Option4 False/Not Installed: ""
*CloseUI: *Option4

*OpenUI *Option5/Printer Hard Disk - Option: Boolean
*DefaultOption5: False
*Option5 False/Not Installed: ""
*Option5 True/Installed: ""
*CloseUI: *Option5

*OpenUI *Option6/Printer Memory - Option: PickOne
*DefaultOption6: 2Meg
*Option6 2Meg/2 MB Printer Memory: ""
*Option6 4Meg/4 MB Printer Memory: ""
*Option6 6Meg/6 MB Printer Memory: ""
*Option6 8Meg/8 MB Printer Memory: ""
*Option6 10Meg/10 MB Printer Memory: ""
*Option6 12Meg/12 MB Printer Memory: ""
*Option6 16Meg/16 MB Printer Memory: ""
*CloseUI: *Option6

*CloseGroup: InstallableOptions

*UIConstraints: *Option1 False *Duplex
*UIConstraints: *Option2 False *InputSlot Lower
*UIConstraints: *Option2 False *TraySwitch True
*UIConstraints: *Option3 False *InputSlot Envelope

*% === Basic Capabilities ============

*ColorDevice: False

*LanguageLevel: "2"
*Protocols: PJL
*FreeVM: "376000"
*ColorDevice: False
*DefaultColorSpace: Gray
*Throughput: "8"
*Password: "0"
*ExitServer: "
 count 0 eq   % is the password on the stack?
 { true }
 { dup        % potential password
   statusdict /checkpassword get exec not
 } ifelse
 {  %  if no password or not valid
   (WARNING : Cannot perform the exitserver command.) =
   (Password supplied is not valid.) =
   (Please contact the author of this software.) = flush
   quit
 } if
 serverdict /exitserver get exec
 "
*End
*Reset: "
 count 0 eq  % is the password on the stack?
 { true }
 { dup      % potential password
   statusdict /checkpassword get exec not
 } ifelse
 {  %  if no password or not valid
   (WARNING : Cannot reset printer.) =
   (Password supplied is not valid.) =
   (Please contact the author of this software.) = flush
   quit
 } if
 serverdict /exitserver get exec
 systemdict /quit get exec
 (WARNING : Printer Reset Failed.) = flush
 "
*End

*% === Job Control Language ==

*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>"
*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"

*% === Resolution ============

*OpenUI *Resolution/Resolution:  PickOne
*DefaultResolution: 300dpi
*OrderDependency: 10 AnySetup *Resolution
*Resolution 300dpi/300 dpi: "1 dict dup /HWResolution [300 300] put setpagedevice"
*Resolution 600dpi/600 dpi: "1 dict dup /HWResolution [600 600] put setpagedevice"
*?Resolution: "
 save
 currentpagedevice /HWResolution get 0 get
 (     ) cvs print (dpi) = flush
 restore
 "
*End
*CloseUI: *Resolution

*OpenUI *Smoothing/Smoothing: PickOne
*DefaultSmoothing: False
*OrderDependency: 40 AnySetup *Smoothing
*Smoothing True/On:  "
 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 2 put put setpagedevice"
*End
*Smoothing False/Off: "
 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 0 put put setpagedevice"
*End
*?Smoothing: "
 save
 currentpagedevice /PostRenderingEnhanceDetails get /REValue get
 dup 3 gt{pop 4}if [(False)(True)(True)(True)(Unknown)] exch get = flush
 restore
 "
*End
*CloseUI: *Smoothing

*% === Halftone Information ===============

*ScreenFreq: "60.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
 {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
 sub }{dup mul exch dup mul add 1 exch sub }ifelse }
 "
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"

*DefaultTransfer: Factory
*Transfer Factory: "
 { statusdict begin doenhancedhalftone resolution end 600 eq and
  { dup 0.28 lt
    { 0.6 exp 1.2 mul }
    { dup mul .478426 mul .521574 add }
    ifelse
  }
  { 0.85 exp }
  ifelse }"
*End
*Transfer Factory.Inverse: "
 { statusdict begin doenhancedhalftone resolution end 600 eq and
  { dup 0.28 lt
    { 0.6 exp 1.2 mul }
    { dup mul .478426 mul .521574 add }
    ifelse
  }
  { 0.85 exp }
  ifelse
  1 exch sub }"
*End

*% === Paper Handling ===================

*LandscapeOrientation: Plus90

*% These entries will set up the frame buffer.
*% Usually used with AutoSelect input slot.
*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
*% Other Envelope because C9, B5, and Other Envelope are not defined in
*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
*% dimensions are given. Translation strings give correct names.
*OpenUI *PageSize:  PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "
 2 dict dup /PageSize [612 792]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize Legal/Legal: "
 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
*End
*PageSize Executive/Executive: "
 2 dict dup /PageSize [522 756]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize A4/A4: "
 2 dict dup /PageSize [595 842]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize A5/A5: "
 2 dict dup /PageSize [419 595]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize B5/B5: "
 2 dict dup /PageSize [516 729]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize Monarch/Monarch Envelope: "
 2 dict dup /PageSize [279 540]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize C4/C9 Envelope: "
 2 dict dup /PageSize [279 639]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize Comm10/C10 Envelope: "
 2 dict dup /PageSize [297 684]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize DL/DL Envelope: "
 2 dict dup /PageSize [312 624]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize C5/C5 Envelope: "
 2 dict dup /PageSize [459 649]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize ISOB5/B5 Envelope: "
 2 dict dup /PageSize [499 709]  put dup /ImagingBBox null put setpagedevice"
*End
*PageSize C3/Other Envelope: "
 2 dict dup /PageSize [612 996] put dup /ImagingBBox null put setpagedevice"
*End
*?PageSize: "
 save
 13 dict
   dup /letter (Letter) put
   dup /legal (Legal) put
   dup /executivepage (Executive) put
   dup /a4 (A4) put
   dup /a5 (A5) put
   dup /b5 (B5) put
   dup /3.875x7.5envelope (Monarch) put
   dup /3.875x8.875envelope (C9) put
   dup /4.125x9.5envelope (Comm10) put
   dup /110x220envelope (DL) put
   dup /162x229envelope (C5) put
   dup /176x250envelope (Envelope.499.709) put
   dup /otherenvelope (Envelope.612.996) put
 statusdict /papersize get exec
 3 1 roll  {get} stopped {(Unknown)}if
 exch  not { print (.Transverse) }if
 = flush
 restore
 "
*End
*CloseUI: *PageSize

*% These entries will set up the frame buffer.
*% Usually used with input slots other than AutoSelect.
*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
*% Other Envelope because C9, B5, and Other Envelope are not defined in
*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
*% dimensions are given. Translation strings give correct names.
*OpenUI *PageRegion:  PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/Letter: "
 2 dict dup /PageSize [612 792]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion Legal/Legal: "
 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion Executive/Executive: "
 2 dict dup /PageSize [522 756]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion A4/A4: "
 2 dict dup /PageSize [595 842]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion A5/A5: "
 2 dict dup /PageSize [419 595]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion B5/B5: "
 2 dict dup /PageSize [516 729]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion Monarch/Monarch Envelope: "
 2 dict dup /PageSize [279 540]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion C4/C9 Envelope: "
 2 dict dup /PageSize [279 639]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion Comm10/C10 Envelope: "
 2 dict dup /PageSize [297 684]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion DL/DL Envelope: "
 2 dict dup /PageSize [312 624]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion C5/C5 Envelope: "
 2 dict dup /PageSize [459 649]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion ISOB5/B5 Envelope: "
 2 dict dup /PageSize [499 709]  put dup /ImagingBBox null put setpagedevice"
*End
*PageRegion C3/Other Envelope: "
 2 dict dup /PageSize [612 996] put dup /ImagingBBox null put setpagedevice"
*End
*CloseUI: *PageRegion

*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
*% Other Envelope because C9, B5, and Other Envelope are not defined in
*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
*% dimensions are given. Translation strings give correct names.
*DefaultImageableArea: Letter
*ImageableArea Letter:    "18 17 597 776"
*ImageableArea Legal:     "18 18 597 992"
*ImageableArea Executive: "18 18 505 740"
*ImageableArea A4:        "10 19 588 827"
*ImageableArea A5:        "18 13 405 580"
*ImageableArea B5:        "18 18 505 711"
*ImageableArea Monarch/Monarch Envelope: "18 13 260 526"
*ImageableArea C4/C9 Envelope:           "18 14 260 623"
*ImageableArea Comm10/C10 Envelope:      "18 15 278 668"
*ImageableArea DL/DL Envelope:           "18 14 293 608"
*ImageableArea C5/C5 Envelope:           "18 13 440 634"
*ImageableArea ISOB5/B5 Envelope:        "18 13 480 693"
*ImageableArea C3/Other Envelope:        "18 18 593 992"
*?ImageableArea: "
 save
 /cvp { cvi (            ) cvs print ( ) print } bind def
 newpath clippath pathbbox
 4 -2 roll exch 2 {ceiling cvp} repeat
 exch 2 {floor cvp} repeat flush
 restore
 "
*End

*% These provide the physical dimensions of the paper (by keyword)
*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
*% Other Envelope because C9, B5, and Other Envelope are not defined in
*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
*% dimensions are given. Translation strings give correct names.
*DefaultPaperDimension: Letter
*PaperDimension Letter:    "612 792"
*PaperDimension Legal:     "612 1008"
*PaperDimension Executive: "522 756"
*PaperDimension A4:        "595 842"
*PaperDimension A5:        "420 595"
*PaperDimension B5:        "516 729"
*PaperDimension Monarch/Monarch Envelope: "279 540"
*PaperDimension C4/C9 Envelope:           "279 639"
*PaperDimension Comm10/C10 Envelope:      "297 684"
*PaperDimension DL/DL Envelope:           "312 624"
*PaperDimension C5/C5 Envelope:           "459 649"
*PaperDimension ISOB5/B5 Envelope:        "499 709"
*PaperDimension C3/Other Envelope:        "612 996"

*RequiresPageRegion All: True
*OpenUI *InputSlot:  PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: AutoSelect
*InputSlot AutoSelect/Auto Select: "
 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"
*End
*InputSlot Upper/Upper Tray: "
 currentpagedevice /InputAttributes get 0 get setpagedevice
 1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice
 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
*End
*InputSlot Lower/Lower Tray: "
 userdict /lms statusdict /optionalfeeder get exec { 1 }{ 0 }ifelse put
 currentpagedevice /InputAttributes get lms get setpagedevice
 1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice
 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
*End
*InputSlot Envelope/Envelope Feeder: "
 statusdict /envelopefeeder get exec
 { 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice
   1 dict dup/InputAttributes 1 dict dup /Priority[2] put put setpagedevice }
 { 1 dict dup /ManualFeed true put setpagedevice }ifelse"
*End
*InputSlot EnvelopeManual/Manual Envelope: "
 1 dict dup /ManualFeed true  put setpagedevice
 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"
*End
*?InputSlot: "
 save
 [ (Upper) (Lower) (Envelope) (Manual) (ManualEnvelope) ] statusdict /papertray get exec
 {get exec} stopped { pop pop (Unknown) } if = flush
 restore
 "
*End
*CloseUI: *InputSlot

*OpenUI *ManualFeed/Manual Paper: Boolean
*OrderDependency: 15 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True/On:  "1 dict dup /ManualFeed true  put setpagedevice"
*ManualFeed False/Off: "1 dict dup /ManualFeed false put setpagedevice"
*?ManualFeed: "
 save
 currentpagedevice /ManualFeed get {(True)}{(False)}ifelse = flush
 restore
 "
*End
*CloseUI: *ManualFeed

*OpenUI *TraySwitch/Tray Linking: PickOne
*OrderDependency: 50 AnySetup *TraySwitch
*DefaultTraySwitch: False
*TraySwitch True/On:  "1 dict dup /TraySwitch true  put setpagedevice"
*TraySwitch False/Off: "1 dict dup /TraySwitch false put setpagedevice"
*?TraySwitch: "
 save
 currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush
 restore
 "
*End
*CloseUI: *TraySwitch

*DefaultOutputOrder: Normal
*OutputOrder Normal: ""
*OutputOrder Reverse: ""

*OpenUI *Duplex/Duplex: PickOne
*DefaultDuplex: None
*Duplex None/Simplex: "1 dict dup /Duplex false put setpagedevice"
*Duplex DuplexNoTumble/Duplex - Long Edge: "
 statusdict /duplexer get exec
  { 2 dict dup /Duplex true put dup /Tumble false put setpagedevice }
  { 1 dict dup /Duplex false put setpagedevice }
  ifelse
 "
*End
*Duplex DuplexTumble/Duplex - Short Edge: "
 statusdict /duplexer get exec
 { 2 dict dup /Duplex true put dup /Tumble true put setpagedevice }
 { 1 dict dup /Duplex false put setpagedevice }
 ifelse
 "
*End
*?Duplex: "
 save
 currentpagedevice /Duplex get {(True)}{(False)}ifelse = flush
 restore
 "
*End
*CloseUI: *Duplex

*% === Font Information ==========================================

*DefaultFont: Courier
*Font Courier: Standard "(001.000)" Standard ROM
*Font Courier-Bold: Standard "(001.000)" Standard ROM
*Font Courier-Oblique: Standard "(001.000)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.000)" Standard ROM
*Font Times-Roman: Standard "(001.000)" Standard ROM
*Font Times-Bold: Standard "(001.000)" Standard ROM
*Font Times-Italic: Standard "(001.000)" Standard ROM
*Font Times-BoldItalic: Standard "(001.000)" Standard ROM
*Font Helvetica: Standard "(001.000)" Standard ROM
*Font Helvetica-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.000)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
*Font Symbol: Special "(001.000)" Standard ROM
*Font AvantGarde-Book: Standard "(001.000)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.000)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM
*Font Bookman-Demi: Standard "(001.000)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM
*Font Bookman-Light: Standard "(001.000)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.000)" Standard ROM
*Font Helvetica-Light: Standard "(001.000)" Standard ROM
*Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM
*Font Helvetica-Black: Standard "(001.000)" Standard ROM
*Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM
*Font Palatino-Roman: Standard "(001.000)" Standard ROM
*Font Palatino-Bold: Standard "(001.000)" Standard ROM
*Font Palatino-Italic: Standard "(001.000)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM
*Font ZapfDingbats: Special "(001.000)" Special ROM
*?FontQuery: "
 save
 4 dict begin
  /sv exch def
  /str (fonts/                              ) def
  /st2 128 string def
  { count 0 gt
   { dup st2 cvs (/) print print (:) print dup FontDirectory exch known
    {pop (Yes)}
    { str exch st2 cvs dup length /len exch def
     6 exch putinterval str 0 len 6 add getinterval mark exch
     { } st2 filenameforall counttomark 0 gt
     { cleartomark (Yes)}{cleartomark (No)}ifelse
    }ifelse = flush
   }{ exit } ifelse
  } bind loop
  (*) = flush
  sv
 end
 restore
 "
*End

*?FontList: "
 save
 2 dict begin
  /sv exch def
  /str 128 string def
  FontDirectory { pop == } bind forall flush
  /filenameforall where
  { pop save (fonts/*)
   { dup length 6 sub 6 exch getinterval cvn == } bind
   str filenameforall flush restore
  } if
  (*) = flush
  sv
 end
 restore
 "
*End

*% Printer Messages (verbatim from printer):
*Message: "%%  exitserver: permanent state may be changed  %%"
*Message: "%%  Flushing: rest of job (to end-of-file) will be ignored  %%"
*Message: "\FontName\ not found, using Courier"

*% Status (format: %%  status: <one of these> %% )
*Status: "Printer Busy"
*Status: "Warming Up"
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "initializing"
*Status: "not ready"

*% Input Sources (format: %%  status: <stat>; source: <one of these>  %% )
*Source: "Serial"
*Source: "Parallel"
*Source: "Network"

*% Printer Error (format: %%  PrinterError: <one of these>  %%)
*PrinterError: "Paper Jam"
*PrinterError: "Wrong Paper Length"
*PrinterError: "Invalid Manual Insertion"
*PrinterError: "Change Size in Feeder"
*PrinterError: "Change Size in Tray 1"
*PrinterError: "Change Size in Tray 2"
*PrinterError: "Paper Out or Feed Failure - Feed"
*PrinterError: "Load Manual Envelope"
*PrinterError: "Paper Out or Feed Failure - Tray 1"
*PrinterError: "Paper Out or Feed Failure - Tray 2"
*PrinterError: "Load Manual Paper"
*PrinterError: "Output Bin Full"
*PrinterError: "Cover Open/Cartridge Not Installed"
*PrinterError: "Insufficient Memory"
*PrinterError: "Complex Page"
*PrinterError: "Default Storage Error"
*PrinterError: "Defective Font Card Installed"
*PrinterError: "Flash Full"
*PrinterError: "ioerror"
*PrinterError: "Flash Error"
*PrinterError: "Duplex Not Attached"
*PrinterError: "Duplex Cover Open"
*PrinterError: "Scheduled Maintenance"
*PrinterError: "Toner Low"
*PrinterError: "Service Error"

*%DeviceAdjustMatrix: " 1 0 0 1 0 0 "

*% === Color Separation Information =====================

*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi

*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow

*%  For 60 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"

*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"

*%  For 53 lpi / 300 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"

*%  For 85 lpi / 600 dpi  5,5,2,6,6,2,20/3,0) =====================

*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"

*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
 {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
 abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
 sub }{dup mul exch dup mul add 1 exch sub }ifelse }
 "
*End

*%  For 71 lpi / 600 dpi  ===============================

*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"

*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"

*% End of PPD file for Lexmark 4039 LaserPrinter plus