/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <cassert>

#include <sal/types.h>

#include <basegfx/matrix/b2dhommatrix.hxx>
#include <basegfx/polygon/b2dpolygontools.hxx>
#include <basegfx/polygon/b2dlinegeometry.hxx>
#include <vcl/gdimtf.hxx>
#include <vcl/metaact.hxx>
#include <vcl/outdev.hxx>
#include <vcl/settings.hxx>
#include <vcl/virdev.hxx>
#include <vcl/window.hxx>

#include <salgdi.hxx>

void OutputDevice::DrawPolyLine( const tools::Polygon& rPoly )
{
    assert(!is_double_buffered_window());

    if( mpMetaFile )
        mpMetaFile->AddAction( new MetaPolyLineAction( rPoly ) );

    sal_uInt16 nPoints = rPoly.GetSize();

    if ( !IsDeviceOutputNecessary() || !mbLineColor || (nPoints < 2) || ImplIsRecordLayout() )
        return;

    // we need a graphics
    if ( !mpGraphics && !AcquireGraphics() )
        return;

    if ( mbInitClipRegion )
        InitClipRegion();

    if ( mbOutputClipped )
        return;

    if ( mbInitLineColor )
        InitLineColor();

    // use b2dpolygon drawing if possible
    if ( DrawPolyLineDirect( rPoly.getB2DPolygon() ) )
    {
        basegfx::B2DPolygon aB2DPolyLine(rPoly.getB2DPolygon());
        const basegfx::B2DHomMatrix aTransform = ImplGetDeviceTransformation();
        const basegfx::B2DVector aB2DLineWidth( 1.0, 1.0 );

        // transform the polygon
        aB2DPolyLine.transform( aTransform );

        if(mnAntialiasing & AntialiasingFlags::PixelSnapHairline)
        {
            aB2DPolyLine = basegfx::utils::snapPointsOfHorizontalOrVerticalEdges(aB2DPolyLine);
        }

        if(mpGraphics->DrawPolyLine(
            aB2DPolyLine,
            0.0,
            aB2DLineWidth,
            basegfx::B2DLineJoin::NONE,
            css::drawing::LineCap_BUTT,
            15.0 * F_PI180 /*default fMiterMinimumAngle, not used*/,
            this))
        {
            return;
        }
    }

    tools::Polygon aPoly = ImplLogicToDevicePixel( rPoly );
    SalPoint* pPtAry = reinterpret_cast<SalPoint*>(aPoly.GetPointAry());

    // #100127# Forward beziers to sal, if any
    if( aPoly.HasFlags() )
    {
        const PolyFlags* pFlgAry = aPoly.GetConstFlagAry();
        if( !mpGraphics->DrawPolyLineBezier( nPoints, pPtAry, pFlgAry, this ) )
        {
            aPoly = tools::Polygon::SubdivideBezier(aPoly);
            pPtAry = reinterpret_cast<SalPoint*>(aPoly.GetPointAry());
            mpGraphics->DrawPolyLine( aPoly.GetSize(), pPtAry, this );
        }
    }
    else
    {
        mpGraphics->DrawPolyLine( nPoints, pPtAry, this );
    }

    if( mpAlphaVDev )
        mpAlphaVDev->DrawPolyLine( rPoly );
}

void OutputDevice::DrawPolyLine( const tools::Polygon& rPoly, const LineInfo& rLineInfo )
{
    assert(!is_double_buffered_window());

    if ( rLineInfo.IsDefault() )
    {
        DrawPolyLine( rPoly );
        return;
    }

    // #i101491#
    // Try direct Fallback to B2D-Version of DrawPolyLine
    if((mnAntialiasing & AntialiasingFlags::EnableB2dDraw) &&
       LineStyle::Solid == rLineInfo.GetStyle())
    {
        DrawPolyLine(
            rPoly.getB2DPolygon(),
            static_cast< double >(rLineInfo.GetWidth()),
            rLineInfo.GetLineJoin(),
            rLineInfo.GetLineCap(),
            15.0 * F_PI180 /* default fMiterMinimumAngle, value not available in LineInfo */);
        return;
    }

    if ( mpMetaFile )
        mpMetaFile->AddAction( new MetaPolyLineAction( rPoly, rLineInfo ) );

    drawPolyLine(rPoly, rLineInfo);
}

void OutputDevice::DrawPolyLine( const basegfx::B2DPolygon& rB2DPolygon,
                                 double fLineWidth,
                                 basegfx::B2DLineJoin eLineJoin,
                                 css::drawing::LineCap eLineCap,
                                 double fMiterMinimumAngle)
{
    assert(!is_double_buffered_window());

    if( mpMetaFile )
    {
        LineInfo aLineInfo;
        if( fLineWidth != 0.0 )
            aLineInfo.SetWidth( static_cast<long>(fLineWidth+0.5) );

        const tools::Polygon aToolsPolygon( rB2DPolygon );
        mpMetaFile->AddAction( new MetaPolyLineAction( aToolsPolygon, aLineInfo ) );
    }

    // Do not paint empty PolyPolygons
    if(!rB2DPolygon.count() || !IsDeviceOutputNecessary())
        return;

    // we need a graphics
    if( !mpGraphics && !AcquireGraphics() )
        return;

    if( mbInitClipRegion )
        InitClipRegion();

    if( mbOutputClipped )
        return;

    if( mbInitLineColor )
        InitLineColor();

    // use b2dpolygon drawing if possible
    if ( DrawPolyLineDirect(rB2DPolygon, fLineWidth, 0.0, eLineJoin, eLineCap, fMiterMinimumAngle) )
        return;

    // #i101491#
    // no output yet; fallback to geometry decomposition and use filled polygon paint
    // when line is fat and not too complex. ImplDrawPolyPolygonWithB2DPolyPolygon
    // will do internal needed AA checks etc.
    if(fLineWidth >= 2.5 &&
       rB2DPolygon.count() &&
       rB2DPolygon.count() <= 1000)
    {
        const double fHalfLineWidth((fLineWidth * 0.5) + 0.5);
        const basegfx::B2DPolyPolygon aAreaPolyPolygon(
                basegfx::utils::createAreaGeometry( rB2DPolygon,
                                                    fHalfLineWidth,
                                                    eLineJoin,
                                                    eLineCap,
                                                    fMiterMinimumAngle));
        const Color aOldLineColor(maLineColor);
        const Color aOldFillColor(maFillColor);

        SetLineColor();
        InitLineColor();
        SetFillColor(aOldLineColor);
        InitFillColor();

        // draw using a loop; else the topology will paint a PolyPolygon
        for(sal_uInt32 a(0); a < aAreaPolyPolygon.count(); a++)
        {
            ImplDrawPolyPolygonWithB2DPolyPolygon(
                basegfx::B2DPolyPolygon(aAreaPolyPolygon.getB2DPolygon(a)));
        }

        SetLineColor(aOldLineColor);
        InitLineColor();
        SetFillColor(aOldFillColor);
        InitFillColor();

        const bool bTryAA((mnAntialiasing & AntialiasingFlags::EnableB2dDraw) &&
                          mpGraphics->supportsOperation(OutDevSupportType::B2DDraw) &&
                          RasterOp::OverPaint == GetRasterOp() &&
                          IsLineColor());

        // when AA it is necessary to also paint the filled polygon's outline
        // to avoid optical gaps
        for(sal_uInt32 a(0); a < aAreaPolyPolygon.count(); a++)
        {
            (void)DrawPolyLineDirect( aAreaPolyPolygon.getB2DPolygon(a), 0.0, 0.0, basegfx::B2DLineJoin::NONE, css::drawing::LineCap_BUTT, 15.0 * F_PI180 /*default, not used*/, bTryAA);
        }
    }
    else
    {
        // fallback to old polygon drawing if needed
        const tools::Polygon aToolsPolygon( rB2DPolygon );
        LineInfo aLineInfo;
        if( fLineWidth != 0.0 )
            aLineInfo.SetWidth( static_cast<long>(fLineWidth+0.5) );

        drawPolyLine( aToolsPolygon, aLineInfo );
    }
}

void OutputDevice::drawPolyLine(const tools::Polygon& rPoly, const LineInfo& rLineInfo)
{
    sal_uInt16 nPoints(rPoly.GetSize());

    if ( !IsDeviceOutputNecessary() || !mbLineColor || ( nPoints < 2 ) || ( LineStyle::NONE == rLineInfo.GetStyle() ) || ImplIsRecordLayout() )
        return;

    tools::Polygon aPoly = ImplLogicToDevicePixel( rPoly );

    // we need a graphics
    if ( !mpGraphics && !AcquireGraphics() )
        return;

    if ( mbInitClipRegion )
        InitClipRegion();

    if ( mbOutputClipped )
        return;

    if ( mbInitLineColor )
        InitLineColor();

    const LineInfo aInfo( ImplLogicToDevicePixel( rLineInfo ) );
    const bool bDashUsed(LineStyle::Dash == aInfo.GetStyle());
    const bool bLineWidthUsed(aInfo.GetWidth() > 1);

    if(bDashUsed || bLineWidthUsed)
    {
        drawLine ( basegfx::B2DPolyPolygon(aPoly.getB2DPolygon()), aInfo );
    }
    else
    {
        // #100127# the subdivision HAS to be done here since only a pointer
        // to an array of points is given to the DrawPolyLine method, there is
        // NO way to find out there that it's a curve.
        if( aPoly.HasFlags() )
        {
            aPoly = tools::Polygon::SubdivideBezier( aPoly );
            nPoints = aPoly.GetSize();
        }

        mpGraphics->DrawPolyLine(nPoints, reinterpret_cast<SalPoint*>(aPoly.GetPointAry()), this);
    }

    if( mpAlphaVDev )
        mpAlphaVDev->DrawPolyLine( rPoly, rLineInfo );
}

bool OutputDevice::DrawPolyLineDirect( const basegfx::B2DPolygon& rB2DPolygon,
                                       double fLineWidth,
                                       double fTransparency,
                                       basegfx::B2DLineJoin eLineJoin,
                                       css::drawing::LineCap eLineCap,
                                       double fMiterMinimumAngle,
                                       bool bBypassAACheck)
{
    assert(!is_double_buffered_window());

    // AW: Do NOT paint empty PolyPolygons
    if(!rB2DPolygon.count())
        return true;

    // we need a graphics
    if( !mpGraphics && !AcquireGraphics() )
        return false;

    if( mbInitClipRegion )
        InitClipRegion();

    if( mbOutputClipped )
        return true;

    if( mbInitLineColor )
        InitLineColor();

    const bool bTryAA( bBypassAACheck ||
                      ((mnAntialiasing & AntialiasingFlags::EnableB2dDraw) &&
                      mpGraphics->supportsOperation(OutDevSupportType::B2DDraw) &&
                      RasterOp::OverPaint == GetRasterOp() &&
                      IsLineColor()));

    if(bTryAA)
    {
        const basegfx::B2DHomMatrix aTransform = ImplGetDeviceTransformation();
        basegfx::B2DVector aB2DLineWidth(1.0, 1.0);

        // transform the line width if used
        if( fLineWidth != 0.0 )
        {
            aB2DLineWidth = aTransform * basegfx::B2DVector( fLineWidth, fLineWidth );
        }

        // transform the polygon
        basegfx::B2DPolygon aB2DPolygon(rB2DPolygon);
        aB2DPolygon.transform(aTransform);

        if((mnAntialiasing & AntialiasingFlags::PixelSnapHairline) &&
           aB2DPolygon.count() < 1000)
        {
            // #i98289#, #i101491#
            // better to remove doubles on device coordinates. Also assume from a given amount
            // of points that the single edges are not long enough to smooth
            aB2DPolygon.removeDoublePoints();
            aB2DPolygon = basegfx::utils::snapPointsOfHorizontalOrVerticalEdges(aB2DPolygon);
        }

        // draw the polyline
        bool bDrawSuccess = mpGraphics->DrawPolyLine( aB2DPolygon,
                                                      fTransparency,
                                                      aB2DLineWidth,
                                                      eLineJoin,
                                                      eLineCap,
                                                      fMiterMinimumAngle,
                                                      this );

        if( bDrawSuccess )
        {
            // worked, add metafile action (if recorded) and return true
            if( mpMetaFile )
            {
                LineInfo aLineInfo;
                if( fLineWidth != 0.0 )
                    aLineInfo.SetWidth( static_cast<long>(fLineWidth+0.5) );
                // Transport known information, might be needed
                aLineInfo.SetLineJoin(eLineJoin);
                aLineInfo.SetLineCap(eLineCap);
                // MiterMinimumAngle does not exist yet in LineInfo
                const tools::Polygon aToolsPolygon( rB2DPolygon );
                mpMetaFile->AddAction( new MetaPolyLineAction( aToolsPolygon, aLineInfo ) );
            }
            return true;
        }
    }
    return false;
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */