/*************************************************************************
 *
 *  $RCSfile: prtopt.cxx,v $
 *
 *  $Revision: 1.2 $
 *
 *  last change: $Author: os $ $Date: 2000-10-10 08:29:28 $
 *
 *  The Contents of this file are made available subject to the terms of
 *  either of the following licenses
 *
 *         - GNU Lesser General Public License Version 2.1
 *         - Sun Industry Standards Source License Version 1.1
 *
 *  Sun Microsystems Inc., October, 2000
 *
 *  GNU Lesser General Public License Version 2.1
 *  =============================================
 *  Copyright 2000 by Sun Microsystems, Inc.
 *  901 San Antonio Road, Palo Alto, CA 94303, USA
 *
 *  This library is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU Lesser General Public
 *  License version 2.1, as published by the Free Software Foundation.
 *
 *  This library is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *  Lesser General Public License for more details.
 *
 *  You should have received a copy of the GNU Lesser General Public
 *  License along with this library; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 *  MA  02111-1307  USA
 *
 *
 *  Sun Industry Standards Source License Version 1.1
 *  =================================================
 *  The contents of this file are subject to the Sun Industry Standards
 *  Source License Version 1.1 (the "License"); You may not use this file
 *  except in compliance with the License. You may obtain a copy of the
 *  License at http://www.openoffice.org/license.html.
 *
 *  Software provided under this License is provided on an "AS IS" basis,
 *  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
 *  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
 *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
 *  See the License for the specific provisions governing your rights and
 *  obligations concerning the Software.
 *
 *  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
 *
 *  Copyright: 2000 by Sun Microsystems, Inc.
 *
 *  All Rights Reserved.
 *
 *  Contributor(s): _______________________________________
 *
 *
 ************************************************************************/

#ifdef PRECOMPILED
#include "ui_pch.hxx"
#endif

#pragma hdrstop

#ifndef _UTL_CONFIGMGR_HXX_
#include <unotools/configmgr.hxx>
#endif
#ifndef _PRTOPT_HXX
#include <prtopt.hxx>
#endif
#ifndef _SWPRTOPT_HXX
#include <swprtopt.hxx>
#endif

#ifndef _TOOLS_DEBUG_HXX
#include <tools/debug.hxx>
#endif
#ifndef _COM_SUN_STAR_UNO_ANY_HXX_
#include <com/sun/star/uno/Any.hxx>
#endif
#ifndef _COM_SUN_STAR_UNO_SEQUENCE_HXX_
#include <com/sun/star/uno/Sequence.hxx>
#endif

using namespace utl;
using namespace rtl;
using namespace com::sun::star::uno;

#define C2U(cChar) OUString::createFromAscii(cChar)
/*--------------------------------------------------------------------
     Beschreibung: Ctor
 --------------------------------------------------------------------*/

Sequence<OUString> SwPrintOptions::GetPropertyNames()
{
    static const char* aPropNames[] =
    {
        "Content/Graphic",              //  0
        "Content/Table",                //  1
        "Content/Control",              //  2
        "Content/Background",           //  3
        "Content/PrintBlack",           //  4
        "Content/Note",                 //  5
        "Page/Reversed",                //  6
        "Page/Brochure",                //  7
        "Output/SinglePrintJob",        //  8
        "Output/Fax",                   //  9
        "Papertray/FromPrinterSetup",   // 10
        "Content/Drawing",              // 11 not in SW/Web
        "Page/LeftPage",                // 12 not in SW/Web
        "Page/RightPage"                // 13 not in SW/Web
    };
    const int nCount = bIsWeb ? 11 : 14;
    Sequence<OUString> aNames(nCount);
    OUString* pNames = aNames.getArray();
    for(int i = 0; i < nCount; i++)
    {
        pNames[i] = OUString::createFromAscii(aPropNames[i]);
    }
    return aNames;
}
/* -----------------------------06.09.00 16:44--------------------------------

 ---------------------------------------------------------------------------*/
SwPrintOptions::SwPrintOptions(sal_Bool bWeb) :
    ConfigItem(bWeb ? C2U("Office.WriterWeb/Print") :  C2U("Office.Writer/Print")),
    bPrintGraphic(sal_True),
    bPrintTable(sal_True),
    bPrintDraw(sal_True),
    bPrintControl(sal_True),
    bPrintLeftPage(sal_True),
    bPrintRightPage(sal_True),
    bReverse(sal_False),
    bPaperFromSetup(sal_False),
    bPrintProspect(sal_False),
    bPrintSingleJobs(sal_False),
    bPrintPageBackground(!bWeb),
    bPrintBlackFont(bWeb),
    nPrintPostIts(POSTITS_NONE),
    bIsWeb(bWeb)
{
    Sequence<OUString> aNames = GetPropertyNames();
    Sequence<Any> aValues = GetProperties(aNames);
    EnableNotification(aNames);
    const Any* pValues = aValues.getConstArray();
    DBG_ASSERT(aValues.getLength() == aNames.getLength(), "GetProperties failed")
    if(aValues.getLength() == aNames.getLength())
    {
        for(int nProp = 0; nProp < aNames.getLength(); nProp++)
        {
            if(pValues[nProp].hasValue())
            {
                switch(nProp)
                {
                    case  0: bPrintGraphic      = *(sal_Bool*)pValues[nProp].getValue(); break;
                    case  1: bPrintTable            = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  2: bPrintControl      = *(sal_Bool*)pValues[nProp].getValue() ;  break;
                    case  3: bPrintPageBackground= *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  4: bPrintBlackFont        = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  5: pValues[nProp] >>=  nPrintPostIts       ;  break;
                    case  6: bReverse           = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  7: bPrintProspect      = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  8: bPrintSingleJobs   = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  9: pValues[nProp] >>= sFaxName;  break;
                    case 10: bPaperFromSetup    = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case 11: bPrintDraw         = *(sal_Bool*)pValues[nProp].getValue() ;  break;
                    case 12: bPrintLeftPage     = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case 13: bPrintRightPage        = *(sal_Bool*)pValues[nProp].getValue();  break;
                }
            }
        }
    }
}
/* -----------------------------06.09.00 16:50--------------------------------

 ---------------------------------------------------------------------------*/
SwPrintOptions::~SwPrintOptions()
{
}
/* -----------------------------06.09.00 16:43--------------------------------

 ---------------------------------------------------------------------------*/
void    SwPrintOptions::Commit()
{
    Sequence<OUString> aNames = GetPropertyNames();

    OUString* pNames = aNames.getArray();
    Sequence<Any> aValues(aNames.getLength());
    Any* pValues = aValues.getArray();

    const Type& rType = ::getBooleanCppuType();
    BOOL bVal;
    for(int nProp = 0; nProp < aNames.getLength(); nProp++)
    {
        switch(nProp)
        {
            case  0: bVal = bPrintGraphic; pValues[nProp].setValue(&bVal, rType);break;
            case  1: bVal = bPrintTable         ;pValues[nProp].setValue(&bVal, rType);  break;
            case  2: bVal = bPrintControl        ; pValues[nProp].setValue(&bVal, rType);  break;
            case  3: bVal = bPrintPageBackground; pValues[nProp].setValue(&bVal, rType);  break;
            case  4: bVal = bPrintBlackFont     ; pValues[nProp].setValue(&bVal, rType);  break;
            case  5: pValues[nProp] <<=  nPrintPostIts       ; break;
            case  6: bVal = bReverse             ; pValues[nProp].setValue(&bVal, rType);  break;
            case  7: bVal = bPrintProspect      ; pValues[nProp].setValue(&bVal, rType);  break;
            case  8: bVal = bPrintSingleJobs     ; pValues[nProp].setValue(&bVal, rType);  break;
            case  9: pValues[nProp] <<= sFaxName;  break;
            case 10: bVal = bPaperFromSetup     ; pValues[nProp].setValue(&bVal, rType);  break;
            case 11: bVal = bPrintDraw           ; pValues[nProp].setValue(&bVal, rType);  break;
            case 12: bVal = bPrintLeftPage       ; pValues[nProp].setValue(&bVal, rType);  break;
            case 13: bVal = bPrintRightPage     ; pValues[nProp].setValue(&bVal, rType);  break;
        }
    }
    PutProperties(aNames, aValues);
}
/* -----------------------------06.09.00 16:46--------------------------------

 ---------------------------------------------------------------------------*/
void SwPrintOptions::Notify( const Sequence<rtl::OUString>& aPropertyNames)
{
    DBG_ERROR("properties have been changed")
}