/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <hintids.hxx>

#include <memory>
#include <com/sun/star/i18n/ScriptType.hpp>
#include <editeng/lspcitem.hxx>
#include <txtflcnt.hxx>
#include <txtftn.hxx>
#include <flyfrms.hxx>
#include <fmtflcnt.hxx>
#include <fmtftn.hxx>
#include <ftninfo.hxx>
#include <charfmt.hxx>
#include <editeng/charrotateitem.hxx>
#include <layfrm.hxx>
#include <viewsh.hxx>
#include <viewopt.hxx>
#include <paratr.hxx>
#include "itrform2.hxx"
#include "porrst.hxx"
#include "portab.hxx"
#include "porfly.hxx"
#include "portox.hxx"
#include "porref.hxx"
#include "porfld.hxx"
#include "porftn.hxx"
#include "porhyph.hxx"
#include "pordrop.hxx"
#include "redlnitr.hxx"
#include <pagefrm.hxx>
#include <tgrditem.hxx>
#include <doc.hxx>
#include "pormulti.hxx"
#include <unotools/charclass.hxx>
#include <xmloff/odffields.hxx>
#include <IDocumentSettingAccess.hxx>
#include <IMark.hxx>
#include <IDocumentMarkAccess.hxx>

#include <vector>

using namespace ::com::sun::star;

namespace {
    //! Calculates and sets optimal repaint offset for the current line
    tools::Long lcl_CalcOptRepaint( SwTextFormatter &rThis,
                                    SwLineLayout const &rCurr,
                                    TextFrameIndex nOldLineEnd,
                                    const std::vector<tools::Long> &rFlyStarts );
    //! Determine if we need to build hidden portions
    bool lcl_BuildHiddenPortion(const SwTextSizeInfo& rInf, TextFrameIndex &rPos);

    // Check whether the two font has the same border
    bool lcl_HasSameBorder(const SwFont& rFirst, const SwFont& rSecond);
}

static void ClearFly( SwTextFormatInfo &rInf )
{
    delete rInf.GetFly();
    rInf.SetFly(nullptr);
}

void SwTextFormatter::CtorInitTextFormatter( SwTextFrame *pNewFrame, SwTextFormatInfo *pNewInf )
{
    CtorInitTextPainter( pNewFrame, pNewInf );
    m_pInf = pNewInf;
    m_pDropFormat = GetInfo().GetDropFormat();
    m_pMulti = nullptr;

    m_bOnceMore = false;
    m_bFlyInContentBase = false;
    m_bTruncLines = false;
    m_nContentEndHyph = 0;
    m_nContentMidHyph = 0;
    m_nLeftScanIdx = TextFrameIndex(COMPLETE_STRING);
    m_nRightScanIdx = TextFrameIndex(0);
    m_pByEndIter.reset();
    m_pFirstOfBorderMerge = nullptr;

    if (m_nStart > TextFrameIndex(GetInfo().GetText().getLength()))
    {
        OSL_ENSURE( false, "+SwTextFormatter::CTOR: bad offset" );
        m_nStart = TextFrameIndex(GetInfo().GetText().getLength());
    }

}

SwTextFormatter::~SwTextFormatter()
{
    // Extremely unlikely, but still possible
    // e.g.: field splits up, widows start to matter
    if( GetInfo().GetRest() )
    {
        delete GetInfo().GetRest();
        GetInfo().SetRest(nullptr);
    }
}

void SwTextFormatter::Insert( SwLineLayout *pLay )
{
    // Insert BEHIND the current element
    if ( m_pCurr )
    {
        pLay->SetNext( m_pCurr->GetNext() );
        m_pCurr->SetNext( pLay );
    }
    else
        m_pCurr = pLay;
}

sal_uInt16 SwTextFormatter::GetFrameRstHeight() const
{
    // We want the rest height relative to the page.
    // If we're in a table, then pFrame->GetUpper() is not the page.

    // GetFrameRstHeight() is being called with Footnote.
    // Wrong: const SwFrame *pUpper = pFrame->GetUpper();
    const SwFrame *pPage = m_pFrame->FindPageFrame();
    const SwTwips nHeight = pPage->getFrameArea().Top()
                          + pPage->getFramePrintArea().Top()
                          + pPage->getFramePrintArea().Height() - Y();
    if( 0 > nHeight )
        return m_pCurr->Height();
    else
        return sal_uInt16( nHeight );
}

SwLinePortion *SwTextFormatter::Underflow( SwTextFormatInfo &rInf )
{
    // Save values and initialize rInf
    SwLinePortion *pUnderflow = rInf.GetUnderflow();
    if( !pUnderflow )
        return nullptr;

    // We format backwards, i.e. attribute changes can happen the next
    // line again.
    // Can be seen in 8081.sdw, if you enter text in the first line

    TextFrameIndex const nSoftHyphPos = rInf.GetSoftHyphPos();
    TextFrameIndex const nUnderScorePos = rInf.GetUnderScorePos();

    // Save flys and set to 0, or else segmentation fault
    // Not ClearFly(rInf) !
    SwFlyPortion *pFly = rInf.GetFly();
    rInf.SetFly( nullptr );

    FeedInf( rInf );
    rInf.SetLast( m_pCurr );
    // pUnderflow does not need to be deleted, because it will drown in the following
    // Truncate()
    rInf.SetUnderflow(nullptr);
    rInf.SetSoftHyphPos( nSoftHyphPos );
    rInf.SetUnderScorePos( nUnderScorePos );
    rInf.SetPaintOfst( GetLeftMargin() );

    // We look for the portion with the under-flow position
    SwLinePortion *pPor = m_pCurr->GetFirstPortion();
    if( pPor != pUnderflow )
    {
        // pPrev will be the last portion before pUnderflow,
        // which still has a real width.
        // Exception: SoftHyphPortion must not be forgotten, of course!
        // Although they don't have a width.
        SwLinePortion *pTmpPrev = pPor;
        while( pPor && pPor != pUnderflow )
        {
            if( !pPor->IsKernPortion() &&
                ( pPor->Width() || pPor->IsSoftHyphPortion() ) )
            {
                while( pTmpPrev != pPor )
                {
                    pTmpPrev->Move( rInf );
                    rInf.SetLast( pTmpPrev );
                    pTmpPrev = pTmpPrev->GetNextPortion();
                    OSL_ENSURE( pTmpPrev, "Underflow: losing control!" );
                };
            }
            pPor = pPor->GetNextPortion();
        }
        pPor = pTmpPrev;
        if( pPor && // Skip flys and initials when underflow.
            ( pPor->IsFlyPortion() || pPor->IsDropPortion() ||
              pPor->IsFlyCntPortion() ) )
        {
            pPor->Move( rInf );
            rInf.SetLast( pPor );
            rInf.SetStopUnderflow( true );
            pPor = pUnderflow;
        }
    }

    // What? The under-flow portion is not in the portion chain?
    OSL_ENSURE( pPor, "SwTextFormatter::Underflow: overflow but underflow" );

    // Snapshot
    if ( pPor==rInf.GetLast() )
    {
        // We end up here, if the portion triggering the under-flow
        // spans over the whole line. E.g. if a word spans across
        // multiple lines and flows into a fly in the second line.
        rInf.SetFly( pFly );
        pPor->Truncate();
        return pPor; // Is that enough?
    }
    // End the snapshot

    // X + Width == 0 with SoftHyph > Line?!
    if( !pPor || !(rInf.X() + pPor->Width()) )
    {
        delete pFly;
        return nullptr;
    }

    // Preparing for Format()
    // We need to chip off the chain behind pLast, because we Insert after the Format()
    SeekAndChg( rInf );

    // line width is adjusted, so that pPor does not fit to current
    // line anymore
    rInf.Width( static_cast<sal_uInt16>(rInf.X() + (pPor->Width() ? pPor->Width() - 1 : 0)) );
    rInf.SetLen( pPor->GetLen() );
    rInf.SetFull( false );
    if( pFly )
    {
        // We need to recalculate the FlyPortion due to the following reason:
        // If the base line is lowered by a big font in the middle of the line,
        // causing overlapping with a fly, the FlyPortion has a wrong size/fixed
        // size.
        rInf.SetFly( pFly );
        CalcFlyWidth( rInf );
    }
    rInf.GetLast()->SetNextPortion(nullptr);

    // The SwLineLayout is an exception to this, which splits at the first
    // portion change.
    // Here only the other way around:
    if( rInf.GetLast() == m_pCurr )
    {
        if( pPor->InTextGrp() && !pPor->InExpGrp() )
        {
            const PortionType nOldWhich = m_pCurr->GetWhichPor();
            *static_cast<SwLinePortion*>(m_pCurr) = *pPor;
            m_pCurr->SetNextPortion( pPor->GetNextPortion() );
            m_pCurr->SetWhichPor( nOldWhich );
            pPor->SetNextPortion( nullptr );
            delete pPor;
            pPor = m_pCurr;
        }
    }

    // Make sure that m_pFirstOfBorderMerge does not point to a portion which
    // will be deleted by Truncate() below.
    SwLinePortion* pNext = pPor->GetNextPortion();
    while (pNext)
    {
        if (pNext == m_pFirstOfBorderMerge)
        {
            m_pFirstOfBorderMerge = nullptr;
            break;
        }
        pNext = pNext->GetNextPortion();
    }
    pPor->Truncate();
    SwLinePortion *const pRest( rInf.GetRest() );
    if (pRest && pRest->InFieldGrp() &&
        static_cast<SwFieldPortion*>(pRest)->IsNoLength())
    {
        // HACK: decrement again, so we pick up the suffix in next line!
        m_pByEndIter->PrevAttr();
    }
    delete pRest;
    rInf.SetRest(nullptr);
    return pPor;
}

void SwTextFormatter::InsertPortion( SwTextFormatInfo &rInf,
                                    SwLinePortion *pPor )
{
    SwLinePortion *pLast = nullptr;
    // The new portion is inserted, but everything's different for
    // LineLayout...
    if( pPor == m_pCurr )
    {
        if ( m_pCurr->GetNextPortion() )
        {
            pLast = pPor;
            pPor = m_pCurr->GetNextPortion();
        }

        // i#112181 - Prevent footnote anchor being wrapped to next line
        // without preceding word
        rInf.SetOtherThanFootnoteInside( rInf.IsOtherThanFootnoteInside() || !pPor->IsFootnotePortion() );
    }
    else
    {
        pLast = rInf.GetLast();
        if( pLast->GetNextPortion() )
        {
            while( pLast->GetNextPortion() )
                pLast = pLast->GetNextPortion();
            rInf.SetLast( pLast );
        }
        pLast->Insert( pPor );

        rInf.SetOtherThanFootnoteInside( rInf.IsOtherThanFootnoteInside() || !pPor->IsFootnotePortion() );

        // Adjust maxima
        if( m_pCurr->Height() < pPor->Height() )
            m_pCurr->Height( pPor->Height(), pPor->IsTextPortion() );
        if( m_pCurr->GetAscent() < pPor->GetAscent() )
            m_pCurr->SetAscent( pPor->GetAscent() );

        if (GetTextFrame()->GetDoc().getIDocumentSettingAccess().get(DocumentSettingId::MS_WORD_COMP_MIN_LINE_HEIGHT_BY_FLY))
        {
            // For DOCX with compat=14 the only shape in line defines height of the line in spite of used font
            if (pLast->IsFlyCntPortion() && pPor->IsTextPortion() && pPor->GetLen() == TextFrameIndex(0))
            {
                m_pCurr->SetAscent(pLast->GetAscent());
                m_pCurr->Height(pLast->Height());
            }
        }
    }

    // Sometimes chains are constructed (e.g. by hyphenate)
    rInf.SetLast( pPor );
    while( pPor )
    {
        if (!pPor->IsDropPortion())
            MergeCharacterBorder(*pPor, pLast, rInf);

        pPor->Move( rInf );
        rInf.SetLast( pPor );
        pLast = pPor;
        pPor = pPor->GetNextPortion();
    }
}

void SwTextFormatter::BuildPortions( SwTextFormatInfo &rInf )
{
    OSL_ENSURE( rInf.GetText().getLength() < COMPLETE_STRING,
            "SwTextFormatter::BuildPortions: bad text length in info" );

    rInf.ChkNoHyph( CntEndHyph(), CntMidHyph() );

    // First NewTextPortion() decides whether pCurr ends up in pPor.
    // We need to make sure that the font is being set in any case.
    // This is done automatically in CalcAscent.
    rInf.SetLast( m_pCurr );
    rInf.ForcedLeftMargin( 0 );

    OSL_ENSURE( m_pCurr->FindLastPortion() == m_pCurr, "pLast supposed to equal pCurr" );

    if( !m_pCurr->GetAscent() && !m_pCurr->Height() )
        CalcAscent( rInf, m_pCurr );

    SeekAndChg( rInf );

    // Width() is shortened in CalcFlyWidth if we have a FlyPortion
    OSL_ENSURE( !rInf.X() || m_pMulti, "SwTextFormatter::BuildPortion X=0?" );
    CalcFlyWidth( rInf );
    SwFlyPortion *pFly = rInf.GetFly();
    if( pFly )
    {
        if ( 0 < pFly->GetFix() )
            ClearFly( rInf );
        else
            rInf.SetFull(true);
    }

    SwLinePortion *pPor = NewPortion( rInf );

    // Asian grid stuff
    SwTextGridItem const*const pGrid(GetGridItem(m_pFrame->FindPageFrame()));
    const bool bHasGrid = pGrid && rInf.SnapToGrid() &&
                              GRID_LINES_CHARS == pGrid->GetGridType();


    const SwDoc & rDoc = rInf.GetTextFrame()->GetDoc();
    const sal_uInt16 nGridWidth = bHasGrid ? GetGridWidth(*pGrid, rDoc) : 0;

    // used for grid mode only:
    // the pointer is stored, because after formatting of non-asian text,
    // the width of the kerning portion has to be adjusted
    // Inserting a SwKernPortion before a SwTabPortion isn't necessary
    // and will break the SwTabPortion.
    SwKernPortion* pGridKernPortion = nullptr;

    bool bFull = false;
    SwTwips nUnderLineStart = 0;
    rInf.Y( Y() );

    while( pPor && !rInf.IsStop() )
    {
        OSL_ENSURE(rInf.GetLen() < TextFrameIndex(COMPLETE_STRING) &&
                rInf.GetIdx() <= TextFrameIndex(rInf.GetText().getLength()),
                "SwTextFormatter::BuildPortions: bad length in info" );

        // We have to check the script for fields in order to set the
        // correct nActual value for the font.
        if( pPor->InFieldGrp() )
            static_cast<SwFieldPortion*>(pPor)->CheckScript( rInf );

        if( ! bHasGrid && rInf.HasScriptSpace() &&
            rInf.GetLast() && rInf.GetLast()->InTextGrp() &&
            rInf.GetLast()->Width() && !rInf.GetLast()->InNumberGrp() )
        {
            SwFontScript nNxtActual = rInf.GetFont()->GetActual();
            SwFontScript nLstActual = nNxtActual;
            sal_uInt16 nLstHeight = static_cast<sal_uInt16>(rInf.GetFont()->GetHeight());
            bool bAllowBehind = false;
            const CharClass& rCC = GetAppCharClass();

            // are there any punctuation characters on both sides
            // of the kerning portion?
            if ( pPor->InFieldGrp() )
            {
                OUString aAltText;
                if ( static_cast<SwFieldPortion*>(pPor)->GetExpText( rInf, aAltText ) &&
                        !aAltText.isEmpty() )
                {
                    bAllowBehind = rCC.isLetterNumeric( aAltText, 0 );

                    const SwFont* pTmpFnt = static_cast<SwFieldPortion*>(pPor)->GetFont();
                    if ( pTmpFnt )
                        nNxtActual = pTmpFnt->GetActual();
                }
            }
            else
            {
                const OUString& rText = rInf.GetText();
                sal_Int32 nIdx = sal_Int32(rInf.GetIdx());
                bAllowBehind = nIdx < rText.getLength() && rCC.isLetterNumeric(rText, nIdx);
            }

            const SwLinePortion* pLast = rInf.GetLast();
            if ( bAllowBehind && pLast )
            {
                bool bAllowBefore = false;

                if ( pLast->InFieldGrp() )
                {
                    OUString aAltText;
                    if ( static_cast<const SwFieldPortion*>(pLast)->GetExpText( rInf, aAltText ) &&
                         !aAltText.isEmpty() )
                    {
                        bAllowBefore = rCC.isLetterNumeric( aAltText, aAltText.getLength() - 1 );

                        const SwFont* pTmpFnt = static_cast<const SwFieldPortion*>(pLast)->GetFont();
                        if ( pTmpFnt )
                        {
                            nLstActual = pTmpFnt->GetActual();
                            nLstHeight = static_cast<sal_uInt16>(pTmpFnt->GetHeight());
                        }
                    }
                }
                else if ( rInf.GetIdx() )
                {
                    bAllowBefore = rCC.isLetterNumeric(rInf.GetText(), sal_Int32(rInf.GetIdx()) - 1);
                    // Note: ScriptType returns values in [1,4]
                    if ( bAllowBefore )
                        nLstActual = SwFontScript(m_pScriptInfo->ScriptType(rInf.GetIdx() - TextFrameIndex(1)) - 1);
                }

                nLstHeight /= 5;
                // does the kerning portion still fit into the line?
                if( bAllowBefore && ( nLstActual != nNxtActual ) &&
                    nLstHeight && rInf.X() + nLstHeight <= rInf.Width() &&
                    ! pPor->InTabGrp() )
                {
                    SwKernPortion* pKrn =
                        new SwKernPortion( *rInf.GetLast(), nLstHeight,
                                           pLast->InFieldGrp() && pPor->InFieldGrp() );
                    rInf.GetLast()->SetNextPortion( nullptr );
                    InsertPortion( rInf, pKrn );
                }
            }
        }
        else if ( bHasGrid && pGrid->IsSnapToChars() && ! pGridKernPortion && ! m_pMulti && ! pPor->InTabGrp() )
        {
            // insert a grid kerning portion
            pGridKernPortion = pPor->IsKernPortion() ?
                               static_cast<SwKernPortion*>(pPor) :
                               new SwKernPortion( *m_pCurr );

            // if we have a new GridKernPortion, we initially calculate
            // its size so that its ends on the grid
            const SwPageFrame* pPageFrame = m_pFrame->FindPageFrame();
            const SwLayoutFrame* pBody = pPageFrame->FindBodyCont();
            SwRectFnSet aRectFnSet(pPageFrame);

            const tools::Long nGridOrigin = pBody ?
                                    aRectFnSet.GetPrtLeft(*pBody) :
                                    aRectFnSet.GetPrtLeft(*pPageFrame);

            SwTwips nStartX = rInf.X() + GetLeftMargin();
            if ( aRectFnSet.IsVert() )
            {
                Point aPoint( nStartX, 0 );
                m_pFrame->SwitchHorizontalToVertical( aPoint );
                nStartX = aPoint.Y();
            }

            const SwTwips nOfst = nStartX - nGridOrigin;
            if ( nOfst )
            {
                const sal_uLong i = ( nOfst > 0 ) ?
                                ( ( nOfst - 1 ) / nGridWidth + 1 ) :
                                0;
                const SwTwips nKernWidth = i * nGridWidth - nOfst;
                const SwTwips nRestWidth = rInf.Width() - rInf.X();

                if ( nKernWidth <= nRestWidth )
                    pGridKernPortion->Width( static_cast<sal_uInt16>(nKernWidth) );
            }

            if ( pGridKernPortion != pPor )
                InsertPortion( rInf, pGridKernPortion );
        }

        if( pPor->IsDropPortion() )
            MergeCharacterBorder(*static_cast<SwDropPortion*>(pPor));

        // the multi-portion has its own format function
        if( pPor->IsMultiPortion() && ( !m_pMulti || m_pMulti->IsBidi() ) )
            bFull = BuildMultiPortion( rInf, *static_cast<SwMultiPortion*>(pPor) );
        else
            bFull = pPor->Format( rInf );

        if( rInf.IsRuby() && !rInf.GetRest() )
            bFull = true;

        // if we are underlined, we store the beginning of this underlined
        // segment for repaint optimization
        if ( LINESTYLE_NONE != m_pFont->GetUnderline() && ! nUnderLineStart )
            nUnderLineStart = GetLeftMargin() + rInf.X();

        if ( pPor->IsFlyPortion() )
            m_pCurr->SetFly( true );
        // some special cases, where we have to take care for the repaint
        // offset:
        // 1. Underlined portions due to special underline feature
        // 2. Right Tab
        // 3. BidiPortions
        // 4. other Multiportions
        // 5. DropCaps
        // 6. Grid Mode
        else if ( ( ! rInf.GetPaintOfst() || nUnderLineStart < rInf.GetPaintOfst() ) &&
                  // 1. Underlined portions
                  nUnderLineStart &&
                     // reformat is at end of an underlined portion and next portion
                     // is not underlined
                  ( ( rInf.GetReformatStart() == rInf.GetIdx() &&
                      LINESTYLE_NONE == m_pFont->GetUnderline()
                    ) ||
                     // reformat is inside portion and portion is underlined
                    ( rInf.GetReformatStart() >= rInf.GetIdx() &&
                      rInf.GetReformatStart() <= rInf.GetIdx() + pPor->GetLen() &&
                      LINESTYLE_NONE != m_pFont->GetUnderline() ) ) )
            rInf.SetPaintOfst( nUnderLineStart );
        else if (  ! rInf.GetPaintOfst() &&
                   // 2. Right Tab
                   ( ( pPor->InTabGrp() && !pPor->IsTabLeftPortion() ) ||
                   // 3. BidiPortions
                     ( pPor->IsMultiPortion() && static_cast<SwMultiPortion*>(pPor)->IsBidi() ) ||
                   // 4. Multi Portion and 5. Drop Caps
                     ( ( pPor->IsDropPortion() || pPor->IsMultiPortion() ) &&
                       rInf.GetReformatStart() >= rInf.GetIdx() &&
                       rInf.GetReformatStart() <= rInf.GetIdx() + pPor->GetLen() )
                   // 6. Grid Mode
                     || ( bHasGrid && SwFontScript::CJK != m_pFont->GetActual() )
                   )
                )
            // we store the beginning of the critical portion as our
            // paint offset
            rInf.SetPaintOfst( GetLeftMargin() + rInf.X() );

        // under one of these conditions we are allowed to delete the
        // start of the underline portion
        if ( IsUnderlineBreak( *pPor, *m_pFont ) )
            nUnderLineStart = 0;

        if( pPor->IsFlyCntPortion() || ( pPor->IsMultiPortion() &&
            static_cast<SwMultiPortion*>(pPor)->HasFlyInContent() ) )
            SetFlyInCntBase();
        // bUnderflow needs to be reset or we wrap again at the next softhyphen
        if ( !bFull )
        {
            rInf.ClrUnderflow();
            if( ! bHasGrid && rInf.HasScriptSpace() && pPor->InTextGrp() &&
                pPor->GetLen() && !pPor->InFieldGrp() )
            {
                // The distance between two different scripts is set
                // to 20% of the fontheight.
                TextFrameIndex const nTmp = rInf.GetIdx() + pPor->GetLen();
                if (nTmp == m_pScriptInfo->NextScriptChg(nTmp - TextFrameIndex(1)) &&
                    nTmp != TextFrameIndex(rInf.GetText().getLength()) &&
                    (m_pScriptInfo->ScriptType(nTmp - TextFrameIndex(1)) == css::i18n::ScriptType::ASIAN ||
                     m_pScriptInfo->ScriptType(nTmp) == css::i18n::ScriptType::ASIAN) )
                {
                    const sal_uInt16 nDist = static_cast<sal_uInt16>(rInf.GetFont()->GetHeight()/5);

                    if( nDist )
                    {
                        // we do not want a kerning portion if any end
                        // would be a punctuation character
                        const CharClass& rCC = GetAppCharClass();
                        if (rCC.isLetterNumeric(rInf.GetText(), sal_Int32(nTmp) - 1)
                            && rCC.isLetterNumeric(rInf.GetText(), sal_Int32(nTmp)))
                        {
                            // does the kerning portion still fit into the line?
                            if ( rInf.X() + pPor->Width() + nDist <= rInf.Width() )
                                new SwKernPortion( *pPor, nDist );
                            else
                                bFull = true;
                        }
                    }
                }
            }
        }

        if ( bHasGrid && pGrid->IsSnapToChars() && pPor != pGridKernPortion && ! m_pMulti && ! pPor->InTabGrp() )
        {
            TextFrameIndex const nTmp = rInf.GetIdx() + pPor->GetLen();
            const SwTwips nRestWidth = rInf.Width() - rInf.X() - pPor->Width();

            const SwFontScript nCurrScript = m_pFont->GetActual(); // pScriptInfo->ScriptType( rInf.GetIdx() );
            const SwFontScript nNextScript =
                nTmp >= TextFrameIndex(rInf.GetText().getLength())
                    ? SwFontScript::CJK
                    : m_pScriptInfo->WhichFont(nTmp);

            // snap non-asian text to grid if next portion is ASIAN or
            // there are no more portions in this line
            // be careful when handling an underflow event: the gridkernportion
            // could have been deleted
            if ( nRestWidth > 0 && SwFontScript::CJK != nCurrScript &&
                ! rInf.IsUnderflow() && ( bFull || SwFontScript::CJK == nNextScript ) )
            {
                OSL_ENSURE( pGridKernPortion, "No GridKernPortion available" );

                // calculate size
                SwLinePortion* pTmpPor = pGridKernPortion->GetNextPortion();
                sal_uInt16 nSumWidth = pPor->Width();
                while ( pTmpPor )
                {
                    nSumWidth = nSumWidth + pTmpPor->Width();
                    pTmpPor = pTmpPor->GetNextPortion();
                }

                const SwTwips i = nSumWidth ?
                                 ( nSumWidth - 1 ) / nGridWidth + 1 :
                                 0;
                const SwTwips nTmpWidth = i * nGridWidth;
                const SwTwips nKernWidth = std::min(nTmpWidth - nSumWidth, nRestWidth);
                const sal_uInt16 nKernWidth_1 = static_cast<sal_uInt16>(nKernWidth / 2);

                OSL_ENSURE( nKernWidth <= nRestWidth,
                        "Not enough space left for adjusting non-asian text in grid mode" );

                pGridKernPortion->Width( pGridKernPortion->Width() + nKernWidth_1 );
                rInf.X( rInf.X() + nKernWidth_1 );

                if ( ! bFull )
                    new SwKernPortion( *pPor, static_cast<short>(nKernWidth - nKernWidth_1),
                                       false, true );

                pGridKernPortion = nullptr;
            }
            else if ( pPor->IsMultiPortion() || pPor->InFixMargGrp() ||
                      pPor->IsFlyCntPortion() || pPor->InNumberGrp() ||
                      pPor->InFieldGrp() || nCurrScript != nNextScript )
                // next portion should snap to grid
                pGridKernPortion = nullptr;
        }

        rInf.SetFull( bFull );

        // Restportions from fields with multiple lines don't yet have the right ascent
        if ( !pPor->GetLen() && !pPor->IsFlyPortion()
            && !pPor->IsGrfNumPortion() && ! pPor->InNumberGrp()
            && !pPor->IsMultiPortion() )
            CalcAscent( rInf, pPor );

        InsertPortion( rInf, pPor );
        if (pPor->IsMultiPortion() && (!m_pMulti || m_pMulti->IsBidi()))
        {
            (void) rInf.CheckCurrentPosBookmark(); // bookmark was already created inside MultiPortion!
        }
        pPor = NewPortion( rInf );
    }

    if( !rInf.IsStop() )
    {
        // The last right centered, decimal tab
        SwTabPortion *pLastTab = rInf.GetLastTab();
        if( pLastTab )
            pLastTab->FormatEOL( rInf );
        else if( rInf.GetLast() && rInf.LastKernPortion() )
            rInf.GetLast()->FormatEOL( rInf );
    }
    if( m_pCurr->GetNextPortion() && m_pCurr->GetNextPortion()->InNumberGrp()
        && static_cast<SwNumberPortion*>(m_pCurr->GetNextPortion())->IsHide() )
        rInf.SetNumDone( false );

    // Delete fly in any case
    ClearFly( rInf );

    // Reinit the tab overflow flag after the line
    rInf.SetTabOverflow( false );
}

void SwTextFormatter::CalcAdjustLine( SwLineLayout *pCurrent )
{
    if( SvxAdjust::Left != GetAdjust() && !m_pMulti)
    {
        pCurrent->SetFormatAdj(true);
        if( IsFlyInCntBase() )
        {
            CalcAdjLine( pCurrent );
            // For e.g. centered fly we need to switch the RefPoint
            // That's why bAlways = true
            UpdatePos( pCurrent, GetTopLeft(), GetStart(), true );
        }
    }
}

void SwTextFormatter::CalcAscent( SwTextFormatInfo &rInf, SwLinePortion *pPor )
{
    bool bCalc = false;
    if ( pPor->InFieldGrp() && static_cast<SwFieldPortion*>(pPor)->GetFont() )
    {
        // Numbering + InterNetFields can keep an own font, then their size is
        // independent from hard attribute values
        SwFont* pFieldFnt = static_cast<SwFieldPortion*>(pPor)->m_pFont.get();
        SwFontSave aSave( rInf, pFieldFnt );
        pPor->Height( rInf.GetTextHeight() );
        pPor->SetAscent( rInf.GetAscent() );
        bCalc = true;
    }
    // i#89179
    // tab portion representing the list tab of a list label gets the
    // same height and ascent as the corresponding number portion
    else if ( pPor->InTabGrp() && pPor->GetLen() == TextFrameIndex(0) &&
              rInf.GetLast() && rInf.GetLast()->InNumberGrp() &&
              static_cast<const SwNumberPortion*>(rInf.GetLast())->HasFont() )
    {
        const SwLinePortion* pLast = rInf.GetLast();
        pPor->Height( pLast->Height() );
        pPor->SetAscent( pLast->GetAscent() );
    }
    else if (pPor->GetWhichPor() == PortionType::Bookmark
            && rInf.GetIdx() == TextFrameIndex(rInf.GetText().getLength()))
    {
        // bookmark at end of paragraph: *don't* advance iterator, use the
        // current font instead; it's possible that there's a font size on the
        // paragraph and it's overridden on the last line of the paragraph and
        // we don't want to apply it via SwBookmarkPortion and grow the line
        // height (example: n758883.docx)
        SwLinePortion const*const pLast = rInf.GetLast();
        assert(pLast);
        pPor->Height( pLast->Height(), false );
        pPor->SetAscent( pLast->GetAscent() );
    }
    else
    {
        const SwLinePortion *pLast = rInf.GetLast();
        bool bChg = false;

        // In empty lines the attributes are switched on via SeekStart
        const bool bFirstPor = rInf.GetLineStart() == rInf.GetIdx();
        if ( pPor->IsQuoVadisPortion() )
            bChg = SeekStartAndChg( rInf, true );
        else
        {
            if( bFirstPor )
            {
                if( !rInf.GetText().isEmpty() )
                {
                    if ( pPor->GetLen() || !rInf.GetIdx()
                         || ( m_pCurr != pLast && !pLast->IsFlyPortion() )
                         || !m_pCurr->IsRest() ) // instead of !rInf.GetRest()
                        bChg = SeekAndChg( rInf );
                    else
                        bChg = SeekAndChgBefore( rInf );
                }
                else if ( m_pMulti )
                    // do not open attributes starting at 0 in empty multi
                    // portions (rotated numbering followed by a footnote
                    // can cause trouble, because the footnote attribute
                    // starts at 0, but if we open it, the attribute handler
                    // cannot handle it.
                    bChg = false;
                else
                    bChg = SeekStartAndChg( rInf );
            }
            else
                bChg = SeekAndChg( rInf );
        }
        if( bChg || bFirstPor || !pPor->GetAscent()
            || !rInf.GetLast()->InTextGrp() )
        {
            pPor->SetAscent( rInf.GetAscent()  );
            pPor->Height( rInf.GetTextHeight() );
            bCalc = true;
        }
        else
        {
            pPor->Height( pLast->Height() );
            pPor->SetAscent( pLast->GetAscent() );
        }
    }

    if( pPor->InTextGrp() && bCalc )
    {
        pPor->SetAscent(pPor->GetAscent() +
            rInf.GetFont()->GetTopBorderSpace());
        pPor->Height(pPor->Height() +
            rInf.GetFont()->GetTopBorderSpace() +
            rInf.GetFont()->GetBottomBorderSpace() );
    }
}

namespace {

class SwMetaPortion : public SwTextPortion
{
public:
    SwMetaPortion() { SetWhichPor( PortionType::Meta ); }
    virtual void Paint( const SwTextPaintInfo &rInf ) const override;
};

}

void SwMetaPortion::Paint( const SwTextPaintInfo &rInf ) const
{
    if ( Width() )
    {
        rInf.DrawViewOpt( *this, PortionType::Meta );
        SwTextPortion::Paint( rInf );
    }
}

namespace sw::mark {
    OUString ExpandFieldmark(IFieldmark* pBM)
    {
        const IFieldmark::parameter_map_t* const pParameters = pBM->GetParameters();
        sal_Int32 nCurrentIdx = 0;
        const IFieldmark::parameter_map_t::const_iterator pResult = pParameters->find(OUString(ODF_FORMDROPDOWN_RESULT));
        if(pResult != pParameters->end())
            pResult->second >>= nCurrentIdx;

        const IFieldmark::parameter_map_t::const_iterator pListEntries = pParameters->find(OUString(ODF_FORMDROPDOWN_LISTENTRY));
        if (pListEntries != pParameters->end())
        {
            uno::Sequence< OUString > vListEntries;
            pListEntries->second >>= vListEntries;
            if (nCurrentIdx < vListEntries.getLength())
                return vListEntries[nCurrentIdx];
        }

        static constexpr OUStringLiteral vEnSpaces = u"\u2002\u2002\u2002\u2002\u2002";
        return vEnSpaces;
    }
}

SwTextPortion *SwTextFormatter::WhichTextPor( SwTextFormatInfo &rInf ) const
{
    SwTextPortion *pPor = nullptr;
    if( GetFnt()->IsTox() )
    {
        pPor = new SwToxPortion;
    }
    else if ( GetFnt()->IsInputField() )
    {
        if (rInf.GetOpt().IsFieldName())
        {
            OUString aFieldName = SwFieldType::GetTypeStr(SwFieldTypesEnum::Input);
            // assume this is only the *first* portion and follows will be created elsewhere => input field must start at Idx
            assert(rInf.GetText()[sal_Int32(rInf.GetIdx())] == CH_TXT_ATR_INPUTFIELDSTART);
            TextFrameIndex nFieldLen(-1);
            for (TextFrameIndex i = rInf.GetIdx() + TextFrameIndex(1); ; ++i)
            {
                assert(rInf.GetText()[sal_Int32(i)] != CH_TXT_ATR_INPUTFIELDSTART); // can't nest
                if (rInf.GetText()[sal_Int32(i)] == CH_TXT_ATR_INPUTFIELDEND)
                {
                    nFieldLen = i + TextFrameIndex(1) - rInf.GetIdx();
                    break;
                }
            }
            assert(2 <= sal_Int32(nFieldLen));
            pPor = new SwFieldPortion(aFieldName, nullptr, false, nFieldLen);
        }
        else
        {
            pPor = new SwTextInputFieldPortion();
        }
    }
    else
    {
        if( GetFnt()->IsRef() )
            pPor = new SwRefPortion;
        else if (GetFnt()->IsMeta())
        {
            pPor = new SwMetaPortion;
        }
        else
        {
            // Only at the End!
            // If pCurr does not have a width, it can however already have content.
            // E.g. for non-displayable characters

            auto const ch(rInf.GetText()[sal_Int32(rInf.GetIdx())]);
            SwTextFrame const*const pFrame(rInf.GetTextFrame());
            SwPosition aPosition(pFrame->MapViewToModelPos(rInf.GetIdx()));
            sw::mark::IFieldmark *pBM = pFrame->GetDoc().getIDocumentMarkAccess()->getFieldmarkFor(aPosition);
            if(pBM != nullptr && pBM->GetFieldname( ) == ODF_FORMDATE)
            {
                if (ch == CH_TXT_ATR_FIELDSTART)
                    pPor = new SwFieldFormDatePortion(pBM, true);
                else if (ch == CH_TXT_ATR_FIELDSEP)
                    pPor = new SwFieldMarkPortion(); // it's added in DateFieldmark?
                else if (ch == CH_TXT_ATR_FIELDEND)
                    pPor = new SwFieldFormDatePortion(pBM, false);
            }
            else if (ch == CH_TXT_ATR_FIELDSTART)
                pPor = new SwFieldMarkPortion();
            else if (ch == CH_TXT_ATR_FIELDSEP)
                pPor = new SwFieldMarkPortion();
            else if (ch == CH_TXT_ATR_FIELDEND)
                pPor = new SwFieldMarkPortion();
            else if (ch == CH_TXT_ATR_FORMELEMENT)
            {
                OSL_ENSURE(pBM != nullptr, "Where is my form field bookmark???");
                if (pBM != nullptr)
                {
                    if (pBM->GetFieldname( ) == ODF_FORMCHECKBOX)
                    {
                        pPor = new SwFieldFormCheckboxPortion();
                    }
                    else if (pBM->GetFieldname( ) == ODF_FORMDROPDOWN)
                    {
                        pPor = new SwFieldFormDropDownPortion(pBM, sw::mark::ExpandFieldmark(pBM));
                    }
                    /* we need to check for ODF_FORMTEXT for scenario having FormFields inside FORMTEXT.
                     * Otherwise file will crash on open.
                     */
                    else if (pBM->GetFieldname( ) == ODF_FORMTEXT)
                    {
                        pPor = new SwFieldMarkPortion();
                    }
                }
            }
            if( !pPor )
            {
                if( !rInf.X() && !m_pCurr->GetNextPortion() && !m_pCurr->GetLen() )
                    pPor = m_pCurr;
                else
                    pPor = new SwTextPortion;
            }
        }
    }
    return pPor;
}

// We calculate the length, the following portion limits are defined:
// 1) Tabs
// 2) Linebreaks
// 3) CH_TXTATR_BREAKWORD / CH_TXTATR_INWORD
// 4) next attribute change

SwTextPortion *SwTextFormatter::NewTextPortion( SwTextFormatInfo &rInf )
{
    // If we're at the line's beginning, we take pCurr
    // If pCurr is not derived from SwTextPortion, we need to duplicate
    Seek( rInf.GetIdx() );
    SwTextPortion *pPor = WhichTextPor( rInf );

    // until next attribute change:
    const TextFrameIndex nNextAttr = GetNextAttr();
    TextFrameIndex nNextChg = std::min(nNextAttr, TextFrameIndex(rInf.GetText().getLength()));

    // end of script type:
    const TextFrameIndex nNextScript = m_pScriptInfo->NextScriptChg(rInf.GetIdx());
    nNextChg = std::min( nNextChg, nNextScript );

    // end of direction:
    const TextFrameIndex nNextDir = m_pScriptInfo->NextDirChg(rInf.GetIdx());
    nNextChg = std::min( nNextChg, nNextDir );

    // hidden change (potentially via bookmark):
    const TextFrameIndex nNextHidden = m_pScriptInfo->NextHiddenChg(rInf.GetIdx());
    nNextChg = std::min( nNextChg, nNextHidden );

    // bookmarks
    const TextFrameIndex nNextBookmark = m_pScriptInfo->NextBookmark(rInf.GetIdx());
    nNextChg = std::min(nNextChg, nNextBookmark);

    // Turbo boost:
    // We assume that font characters are not larger than twice
    // as wide as height.
    // Very crazy: we need to take the ascent into account.

    // Mind the trap! GetSize() contains the wished-for height, the real height
    // is only known in CalcAscent!

    // The ratio is even crazier: a blank in Times New Roman has an ascent of
    // 182, a height of 200 and a width of 53!
    // It follows that a line with a lot of blanks is processed incorrectly.
    // Therefore we increase from factor 2 to 8 (due to negative kerning).

    pPor->SetLen(TextFrameIndex(1));
    CalcAscent( rInf, pPor );

    const SwFont* pTmpFnt = rInf.GetFont();
    sal_Int32 nExpect = std::min( sal_Int32( pTmpFnt->GetHeight() ),
                             sal_Int32( pPor->GetAscent() ) ) / 8;
    if ( !nExpect )
        nExpect = 1;
    nExpect = sal_Int32(rInf.GetIdx()) + (rInf.GetLineWidth() / nExpect);
    if (TextFrameIndex(nExpect) > rInf.GetIdx() && nNextChg > TextFrameIndex(nExpect))
        nNextChg = TextFrameIndex(std::min(nExpect, rInf.GetText().getLength()));

    // we keep an invariant during method calls:
    // there are no portion ending characters like hard spaces
    // or tabs in [ nLeftScanIdx, nRightScanIdx ]
    if ( m_nLeftScanIdx <= rInf.GetIdx() && rInf.GetIdx() <= m_nRightScanIdx )
    {
        if ( nNextChg > m_nRightScanIdx )
            nNextChg = m_nRightScanIdx =
                rInf.ScanPortionEnd( m_nRightScanIdx, nNextChg );
    }
    else
    {
        m_nLeftScanIdx = rInf.GetIdx();
        nNextChg = m_nRightScanIdx =
                rInf.ScanPortionEnd( rInf.GetIdx(), nNextChg );
    }

    pPor->SetLen( nNextChg - rInf.GetIdx() );
    rInf.SetLen( pPor->GetLen() );
    return pPor;
}

// first portions have no length
SwLinePortion *SwTextFormatter::WhichFirstPortion(SwTextFormatInfo &rInf)
{
    SwLinePortion *pPor = nullptr;

    if( rInf.GetRest() )
    {
        // Tabs and fields
        if( '\0' != rInf.GetHookChar() )
            return nullptr;

        pPor = rInf.GetRest();
        if( pPor->IsErgoSumPortion() )
            rInf.SetErgoDone(true);
        else
            if( pPor->IsFootnoteNumPortion() )
                rInf.SetFootnoteDone(true);
            else
                if( pPor->InNumberGrp() )
                    rInf.SetNumDone(true);

        rInf.SetRest(nullptr);
        m_pCurr->SetRest( true );
        return pPor;
    }

    // We can stand in the follow, it's crucial that
    // pFrame->GetOffset() == 0!
    if( rInf.GetIdx() )
    {
        // We now too can elongate FootnotePortions and ErgoSumPortions

        // 1. The ErgoSumTexts
        if( !rInf.IsErgoDone() )
        {
            if( m_pFrame->IsInFootnote() && !m_pFrame->GetIndPrev() )
                pPor = NewErgoSumPortion( rInf );
            rInf.SetErgoDone( true );
        }

        // 2. Arrow portions
        if( !pPor && !rInf.IsArrowDone() )
        {
            if( m_pFrame->GetOffset() && !m_pFrame->IsFollow() &&
                rInf.GetIdx() == m_pFrame->GetOffset() )
                pPor = new SwArrowPortion( *m_pCurr );
            rInf.SetArrowDone( true );
        }

        // 3. Kerning portions at beginning of line in grid mode
        if ( ! pPor && ! m_pCurr->GetNextPortion() )
        {
            SwTextGridItem const*const pGrid(
                    GetGridItem(GetTextFrame()->FindPageFrame()));
            if ( pGrid )
                pPor = new SwKernPortion( *m_pCurr );
        }

        // 4. The line rests (multiline fields)
        if( !pPor )
        {
            pPor = rInf.GetRest();
            // Only for pPor of course
            if( pPor )
            {
                m_pCurr->SetRest( true );
                rInf.SetRest(nullptr);
            }
        }
    }
    else
    {
        // 5. The foot note count
        if( !rInf.IsFootnoteDone() )
        {
            OSL_ENSURE( ( ! rInf.IsMulti() && ! m_pMulti ) || m_pMulti->HasRotation(),
                     "Rotated number portion trouble" );

            const bool bFootnoteNum = m_pFrame->IsFootnoteNumFrame();
            rInf.GetParaPortion()->SetFootnoteNum( bFootnoteNum );
            if( bFootnoteNum )
                pPor = NewFootnoteNumPortion( rInf );
            rInf.SetFootnoteDone( true );
        }

        // 6. The ErgoSumTexts of course also exist in the TextMaster,
        // it's crucial whether the SwFootnoteFrame is aFollow
        if( !rInf.IsErgoDone() && !pPor && ! rInf.IsMulti() )
        {
            if( m_pFrame->IsInFootnote() && !m_pFrame->GetIndPrev() )
                pPor = NewErgoSumPortion( rInf );
            rInf.SetErgoDone( true );
        }

        // 7. The numbering
        if( !rInf.IsNumDone() && !pPor )
        {
            OSL_ENSURE( ( ! rInf.IsMulti() && ! m_pMulti ) || m_pMulti->HasRotation(),
                     "Rotated number portion trouble" );

            // If we're in the follow, then of course not
            if (GetTextFrame()->GetTextNodeForParaProps()->GetNumRule())
                pPor = NewNumberPortion( rInf );
            rInf.SetNumDone( true );
        }
        // 8. The DropCaps
        if( !pPor && GetDropFormat() && ! rInf.IsMulti() )
            pPor = NewDropPortion( rInf );

        // 9. Kerning portions at beginning of line in grid mode
        if ( !pPor && !m_pCurr->GetNextPortion() )
        {
            SwTextGridItem const*const pGrid(
                    GetGridItem(GetTextFrame()->FindPageFrame()));
            if ( pGrid )
                pPor = new SwKernPortion( *m_pCurr );
        }
    }

    // 10. Decimal tab portion at the beginning of each line in table cells
    if ( !pPor && !m_pCurr->GetNextPortion() &&
             GetTextFrame()->IsInTab() &&
             GetTextFrame()->GetDoc().getIDocumentSettingAccess().get(DocumentSettingId::TAB_COMPAT))
    {
        pPor = NewTabPortion( rInf, true );
    }

    // 11. suffix of meta-field
    if (!pPor)
    {
        pPor = TryNewNoLengthPortion(rInf);
    }

    // 12. bookmarks
    // check this *last* so that BuildMultiPortion() can find it!
    if (!pPor && rInf.CheckCurrentPosBookmark())
    {
        auto const bookmark(m_pScriptInfo->GetBookmark(rInf.GetIdx()));
        if (static_cast<bool>(bookmark))
        {
            sal_Unicode mark;
            if ((bookmark & (SwScriptInfo::MarkKind::Start|SwScriptInfo::MarkKind::End))
                        == (SwScriptInfo::MarkKind::Start|SwScriptInfo::MarkKind::End))
            {
                //mark = u'\u2336'; // not in OpenSymbol :(
                mark = '|';
                // hmm ... paint U+2345 over U+2346 should be same width?
                // and U+237F // or U+2E20/U+2E21
            }
            else if (bookmark & SwScriptInfo::MarkKind::Start)
            {
                mark = '[';
            }
            else if (bookmark & SwScriptInfo::MarkKind::End)
            {
                mark = ']';
            }
            else
            {
                assert(bookmark & SwScriptInfo::MarkKind::Point);
                mark = '|';
            }
            pPor = new SwBookmarkPortion(mark);
        }
    }

    return pPor;
}

static bool lcl_OldFieldRest( const SwLineLayout* pCurr )
{
    if( !pCurr->GetNext() )
        return false;
    const SwLinePortion *pPor = pCurr->GetNext()->GetNextPortion();
    bool bRet = false;
    while( pPor && !bRet )
    {
        bRet = (pPor->InFieldGrp() && static_cast<const SwFieldPortion*>(pPor)->IsFollow()) ||
            (pPor->IsMultiPortion() && static_cast<const SwMultiPortion*>(pPor)->IsFollowField());
        if( !pPor->GetLen() )
            break;
        pPor = pPor->GetNextPortion();
    }
    return bRet;
}

/* NewPortion sets rInf.nLen
 * A SwTextPortion is limited by a tab, break, txtatr or attr change
 * We can have three cases:
 * 1) The line is full and the wrap was not emulated
 *    -> return 0;
 * 2) The line is full and a wrap was emulated
 *    -> Reset width and return new FlyPortion
 * 3) We need to construct a new portion
 *    -> CalcFlyWidth emulates the width and return portion, if needed
 */

SwLinePortion *SwTextFormatter::NewPortion( SwTextFormatInfo &rInf )
{
    // Underflow takes precedence
    rInf.SetStopUnderflow( false );
    if( rInf.GetUnderflow() )
    {
        OSL_ENSURE( rInf.IsFull(), "SwTextFormatter::NewPortion: underflow but not full" );
        return Underflow( rInf );
    }

    // If the line is full, flys and Underflow portions could be waiting ...
    if( rInf.IsFull() )
    {
        // LineBreaks and Flys (bug05.sdw)
        // IsDummy()
        if( rInf.IsNewLine() && (!rInf.GetFly() || !m_pCurr->IsDummy()) )
            return nullptr;

        // When the text bumps into the Fly, or when the Fly comes first because
        // it juts out over the left edge, GetFly() is returned.
        // When IsFull() and no GetFly() is available, naturally zero is returned.
        if( rInf.GetFly() )
        {
            if( rInf.GetLast()->IsBreakPortion() )
            {
                delete rInf.GetFly();
                rInf.SetFly( nullptr );
            }

            return rInf.GetFly();
        }

        // A nasty special case: A frame without wrap overlaps the Footnote area.
        // We must declare the Footnote portion as rest of line, so that
        // SwTextFrame::Format doesn't abort (the text mass already was formatted).
        if( rInf.GetRest() )
            rInf.SetNewLine( true );
        else
        {
            // When the next line begins with a rest of a field, but now no
            // rest remains, the line must definitely be formatted anew!
            if( lcl_OldFieldRest( GetCurr() ) )
                rInf.SetNewLine( true );
            else
            {
                SwLinePortion *pFirst = WhichFirstPortion( rInf );
                if( pFirst )
                {
                    rInf.SetNewLine( true );
                    if( pFirst->InNumberGrp() )
                        rInf.SetNumDone( false) ;
                    delete pFirst;
                }
            }
        }

        return nullptr;
    }

    SwLinePortion *pPor = WhichFirstPortion( rInf );

    // Check for Hidden Portion:
    if ( !pPor )
    {
        TextFrameIndex nEnd = rInf.GetIdx();
        if ( ::lcl_BuildHiddenPortion( rInf, nEnd ) )
            pPor = new SwHiddenTextPortion( nEnd - rInf.GetIdx() );
    }

    if( !pPor )
    {
        if( ( !m_pMulti || m_pMulti->IsBidi() ) &&
            // i#42734
            // No multi portion if there is a hook character waiting:
            ( !rInf.GetRest() || '\0' == rInf.GetHookChar() ) )
        {
            // We open a multiportion part, if we enter a multi-line part
            // of the paragraph.
            TextFrameIndex nEnd = rInf.GetIdx();
            std::unique_ptr<SwMultiCreator> pCreate = rInf.GetMultiCreator( nEnd, m_pMulti );
            if( pCreate )
            {
                SwMultiPortion* pTmp = nullptr;

                if ( SwMultiCreatorId::Bidi == pCreate->nId )
                    pTmp = new SwBidiPortion( nEnd, pCreate->nLevel );
                else if ( SwMultiCreatorId::Ruby == pCreate->nId )
                {
                    pTmp = new SwRubyPortion( *pCreate, *rInf.GetFont(),
                          GetTextFrame()->GetDoc().getIDocumentSettingAccess(),
                          nEnd, TextFrameIndex(0), rInf );
                }
                else if( SwMultiCreatorId::Rotate == pCreate->nId )
                {
                    pTmp = new SwRotatedPortion( *pCreate, nEnd,
                                                 GetTextFrame()->IsRightToLeft() );
                    GetTextFrame()->SetHasRotatedPortions(true);
                }
                else
                    pTmp = new SwDoubleLinePortion( *pCreate, nEnd );

                pCreate.reset();
                CalcFlyWidth( rInf );

                return pTmp;
            }
        }
        // Tabs and Fields
        sal_Unicode cChar = rInf.GetHookChar();

        if( cChar )
        {
            /* We fetch cChar again to be sure that the tab is pending now and
             * didn't move to the next line (as happens behind frames).
             * However, when a FieldPortion is in the rest, we must naturally fetch
             * the cChar from the field content, e.g. DecimalTabs and fields (22615)
             */
            if( !rInf.GetRest() || !rInf.GetRest()->InFieldGrp() )
                cChar = rInf.GetChar( rInf.GetIdx() );
            rInf.ClearHookChar();
        }
        else
        {
            if (rInf.GetIdx() >= TextFrameIndex(rInf.GetText().getLength()))
            {
                rInf.SetFull(true);
                CalcFlyWidth( rInf );
                return pPor;
            }
            cChar = rInf.GetChar( rInf.GetIdx() );
        }

        switch( cChar )
        {
            case CH_TAB:
                pPor = NewTabPortion( rInf, false ); break;

            case CH_BREAK:
                pPor = new SwBreakPortion( *rInf.GetLast() ); break;

            case CHAR_SOFTHYPHEN:                   // soft hyphen
                pPor = new SwSoftHyphPortion; break;

            case CHAR_HARDBLANK:                    // no-break space
                // Please check tdf#115067 if you want to edit the char
                pPor = new SwBlankPortion( cChar ); break;

            case CHAR_HARDHYPHEN:               // non-breaking hyphen
                pPor = new SwBlankPortion( '-' ); break;

            case CHAR_ZWSP:                     // zero width space
            case CHAR_ZWNBSP :                  // word joiner
                pPor = new SwControlCharPortion( cChar ); break;

            case CH_TXTATR_BREAKWORD:
            case CH_TXTATR_INWORD:
                if( rInf.HasHint( rInf.GetIdx() ) )
                {
                    pPor = NewExtraPortion( rInf );
                    break;
                }
                [[fallthrough]];
            default        :
                {
                    SwTabPortion* pLastTabPortion = rInf.GetLastTab();
                    if ( pLastTabPortion && cChar == rInf.GetTabDecimal() )
                    {
                        // Abandon dec. tab position if line is full
                        // We have a decimal tab portion in the line and the next character has to be
                        // aligned at the tab stop position. We store the width from the beginning of
                        // the tab stop portion up to the portion containing the decimal separator:
                        if (GetTextFrame()->GetDoc().getIDocumentSettingAccess().get(DocumentSettingId::TAB_COMPAT) /*rInf.GetVsh()->IsTabCompat();*/ &&
                             PortionType::TabDecimal == pLastTabPortion->GetWhichPor() )
                        {
                            OSL_ENSURE( rInf.X() >= pLastTabPortion->GetFix(), "Decimal tab stop position cannot be calculated" );
                            const sal_uInt16 nWidthOfPortionsUpToDecimalPosition = static_cast<sal_uInt16>(rInf.X() - pLastTabPortion->GetFix() );
                            static_cast<SwTabDecimalPortion*>(pLastTabPortion)->SetWidthOfPortionsUpToDecimalPosition( nWidthOfPortionsUpToDecimalPosition );
                            rInf.SetTabDecimal( 0 );
                        }
                        else
                            rInf.SetFull( rInf.GetLastTab()->Format( rInf ) );
                    }

                    if( rInf.GetRest() )
                    {
                        if( rInf.IsFull() )
                        {
                            rInf.SetNewLine(true);
                            return nullptr;
                        }
                        pPor = rInf.GetRest();
                        rInf.SetRest(nullptr);
                    }
                    else
                    {
                        if( rInf.IsFull() )
                            return nullptr;
                        pPor = NewTextPortion( rInf );
                    }
                    break;
                }
        }

        // if a portion is created despite there being a pending RestPortion,
        // then it is a field which has been split (e.g. because it contains a Tab)
        if( pPor && rInf.GetRest() )
            pPor->SetLen(TextFrameIndex(0));

        // robust:
        if( !pPor || rInf.IsStop() )
        {
            delete pPor;
            return nullptr;
        }
    }

    assert(pPor && "can only reach here with pPor existing");

    // Special portions containing numbers (footnote anchor, footnote number,
    // numbering) can be contained in a rotated portion, if the user
    // choose a rotated character attribute.
    if (!m_pMulti)
    {
        if ( pPor->IsFootnotePortion() )
        {
            const SwTextFootnote* pTextFootnote = static_cast<SwFootnotePortion*>(pPor)->GetTextFootnote();

            if ( pTextFootnote )
            {
                SwFormatFootnote& rFootnote = const_cast<SwFormatFootnote&>(pTextFootnote->GetFootnote());
                const SwDoc *const pDoc = &rInf.GetTextFrame()->GetDoc();
                const SwEndNoteInfo* pInfo;
                if( rFootnote.IsEndNote() )
                    pInfo = &pDoc->GetEndNoteInfo();
                else
                    pInfo = &pDoc->GetFootnoteInfo();
                const SwAttrSet& rSet = pInfo->GetAnchorCharFormat(const_cast<SwDoc&>(*pDoc))->GetAttrSet();

                const SfxPoolItem* pItem;
                Degree10 nDir(0);
                if( SfxItemState::SET == rSet.GetItemState( RES_CHRATR_ROTATE,
                    true, &pItem ))
                    nDir = static_cast<const SvxCharRotateItem*>(pItem)->GetValue();

                if ( nDir )
                {
                    delete pPor;
                    pPor = new SwRotatedPortion(rInf.GetIdx() + TextFrameIndex(1),
                                                900_deg10 == nDir
                                                    ? DIR_BOTTOM2TOP
                                                    : DIR_TOP2BOTTOM );
                }
            }
        }
        else if ( pPor->InNumberGrp() )
        {
            const SwFont* pNumFnt = static_cast<SwFieldPortion*>(pPor)->GetFont();

            if ( pNumFnt )
            {
                Degree10 nDir = pNumFnt->GetOrientation( rInf.GetTextFrame()->IsVertical() );
                if ( nDir )
                {
                    delete pPor;
                    pPor = new SwRotatedPortion(TextFrameIndex(0), 900_deg10 == nDir
                                                    ? DIR_BOTTOM2TOP
                                                    : DIR_TOP2BOTTOM );

                    rInf.SetNumDone( false );
                    rInf.SetFootnoteDone( false );
                }
            }
        }
    }

    // The font is set in output device,
    // the ascent and the height will be calculated.
    if( !pPor->GetAscent() && !pPor->Height() )
        CalcAscent( rInf, pPor );
    rInf.SetLen( pPor->GetLen() );

    // In CalcFlyWidth Width() will be shortened if a FlyPortion is present.
    CalcFlyWidth( rInf );

    // One must not forget that pCurr as GetLast() must provide reasonable values:
    if( !m_pCurr->Height() )
    {
        OSL_ENSURE( m_pCurr->Height(), "SwTextFormatter::NewPortion: limbo dance" );
        m_pCurr->Height( pPor->Height(), false );
        m_pCurr->SetAscent( pPor->GetAscent() );
    }

    OSL_ENSURE(pPor->Height(), "SwTextFormatter::NewPortion: something went wrong");
    if( pPor->IsPostItsPortion() && rInf.X() >= rInf.Width() && rInf.GetFly() )
    {
        delete pPor;
        pPor = rInf.GetFly();
    }
    return pPor;
}

TextFrameIndex SwTextFormatter::FormatLine(TextFrameIndex const nStartPos)
{
    OSL_ENSURE( ! m_pFrame->IsVertical() || m_pFrame->IsSwapped(),
            "SwTextFormatter::FormatLine( nStartPos ) with unswapped frame" );

    // For the formatting routines, we set pOut to the reference device.
    SwHookOut aHook( GetInfo() );
    if (GetInfo().GetLen() < TextFrameIndex(GetInfo().GetText().getLength()))
        GetInfo().SetLen(TextFrameIndex(GetInfo().GetText().getLength()));

    bool bBuild = true;
    SetFlyInCntBase( false );
    GetInfo().SetLineHeight( 0 );
    GetInfo().SetLineNetHeight( 0 );

    // Recycling must be suppressed by changed line height and also
    // by changed ascent (lowering of baseline).
    const sal_uInt16 nOldHeight = m_pCurr->Height();
    const sal_uInt16 nOldAscent = m_pCurr->GetAscent();

    m_pCurr->SetEndHyph( false );
    m_pCurr->SetMidHyph( false );

    // fly positioning can make it necessary format a line several times
    // for this, we have to keep a copy of our rest portion
    SwLinePortion* pField = GetInfo().GetRest();
    std::unique_ptr<SwFieldPortion> xSaveField;

    if ( pField && pField->InFieldGrp() && !pField->IsFootnotePortion() )
        xSaveField.reset(new SwFieldPortion( *static_cast<SwFieldPortion*>(pField) ));

    // for an optimal repaint rectangle, we want to compare fly portions
    // before and after the BuildPortions call
    const bool bOptimizeRepaint = AllowRepaintOpt();
    TextFrameIndex const nOldLineEnd = nStartPos + m_pCurr->GetLen();
    std::vector<tools::Long> flyStarts;

    // these are the conditions for a fly position comparison
    if ( bOptimizeRepaint && m_pCurr->IsFly() )
    {
        SwLinePortion* pPor = m_pCurr->GetFirstPortion();
        tools::Long nPOfst = 0;
        while ( pPor )
        {
            if ( pPor->IsFlyPortion() )
                // insert start value of fly portion
                flyStarts.push_back( nPOfst );

            nPOfst += pPor->Width();
            pPor = pPor->GetNextPortion();
        }
    }

    // Here soon the underflow check follows.
    while( bBuild )
    {
        GetInfo().SetFootnoteInside( false );
        GetInfo().SetOtherThanFootnoteInside( false );

        // These values must not be reset by FormatReset();
        const bool bOldNumDone = GetInfo().IsNumDone();
        const bool bOldArrowDone = GetInfo().IsArrowDone();
        const bool bOldErgoDone = GetInfo().IsErgoDone();

        // besides other things, this sets the repaint offset to 0
        FormatReset( GetInfo() );

        GetInfo().SetNumDone( bOldNumDone );
        GetInfo().SetArrowDone( bOldArrowDone );
        GetInfo().SetErgoDone( bOldErgoDone );

        // build new portions for this line
        BuildPortions( GetInfo() );

        if( GetInfo().IsStop() )
        {
            m_pCurr->SetLen(TextFrameIndex(0));
            m_pCurr->Height( GetFrameRstHeight() + 1, false );
            m_pCurr->SetRealHeight( GetFrameRstHeight() + 1 );
            m_pCurr->Width(0);
            m_pCurr->Truncate();
            return nStartPos;
        }
        else if( GetInfo().IsDropInit() )
        {
            DropInit();
            GetInfo().SetDropInit( false );
        }

        m_pCurr->CalcLine( *this, GetInfo() );
        CalcRealHeight( GetInfo().IsNewLine() );

        //i#120864 For Special case that at the first calculation couldn't get
        //correct height. And need to recalculate for the right height.
        SwLinePortion* pPorTmp = m_pCurr->GetNextPortion();
        if ( IsFlyInCntBase() && (!IsQuick() || (pPorTmp && pPorTmp->IsFlyCntPortion() && !pPorTmp->GetNextPortion() &&
            m_pCurr->Height() > pPorTmp->Height())))
        {
            sal_uInt16 nTmpAscent, nTmpHeight;
            CalcAscentAndHeight( nTmpAscent, nTmpHeight );
            AlignFlyInCntBase( Y() + tools::Long( nTmpAscent ) );
            m_pCurr->CalcLine( *this, GetInfo() );
            CalcRealHeight();
        }

        // bBuild decides if another lap of honor is done
        if ( m_pCurr->GetRealHeight() <= GetInfo().GetLineHeight() )
        {
            m_pCurr->SetRealHeight( GetInfo().GetLineHeight() );
            bBuild = false;
        }
        else
        {
            bBuild = ( GetInfo().GetTextFly().IsOn() && ChkFlyUnderflow(GetInfo()) )
                     || GetInfo().CheckFootnotePortion(m_pCurr);
            if( bBuild )
            {
                GetInfo().SetNumDone( bOldNumDone );
                GetInfo().ResetMaxWidthDiff();

                // delete old rest
                if ( GetInfo().GetRest() )
                {
                    delete GetInfo().GetRest();
                    GetInfo().SetRest( nullptr );
                }

                // set original rest portion
                if ( xSaveField )
                    GetInfo().SetRest( new SwFieldPortion( *xSaveField ) );

                m_pCurr->SetLen(TextFrameIndex(0));
                m_pCurr->Width(0);
                m_pCurr->Truncate();
            }
        }
    }

    // In case of compat mode, it's possible that a tab portion is wider after
    // formatting than before. If this is the case, we also have to make sure
    // the SwLineLayout is wider as well.
    if (GetInfo().GetTextFrame()->GetDoc().getIDocumentSettingAccess().get(DocumentSettingId::TAB_OVER_MARGIN))
    {
        sal_uInt16 nSum = 0;
        SwLinePortion* pPor = m_pCurr->GetFirstPortion();

        while (pPor)
        {
            nSum += pPor->Width();
            pPor = pPor->GetNextPortion();
        }

        if (nSum > m_pCurr->Width())
            m_pCurr->Width(nSum);
    }

    // calculate optimal repaint rectangle
    if ( bOptimizeRepaint )
    {
        GetInfo().SetPaintOfst( ::lcl_CalcOptRepaint( *this, *m_pCurr, nOldLineEnd, flyStarts ) );
        flyStarts.clear();
    }
    else
        // Special case: we do not allow an optimization of the repaint
        // area, but during formatting the repaint offset is set to indicate
        // a maximum value for the offset. This value has to be reset:
        GetInfo().SetPaintOfst( 0 );

    // This corrects the start of the reformat range if something has
    // moved to the next line. Otherwise IsFirstReformat in AllowRepaintOpt
    // will give us a wrong result if we have to reformat another line
    GetInfo().GetParaPortion()->GetReformat().LeftMove( GetInfo().GetIdx() );

    // delete master copy of rest portion
    xSaveField.reset();

    TextFrameIndex const nNewStart = nStartPos + m_pCurr->GetLen();

    // adjust text if kana compression is enabled
    if ( GetInfo().CompressLine() )
    {
        SwTwips nRepaintOfst = CalcKanaAdj( m_pCurr );

        // adjust repaint offset
        if ( nRepaintOfst < GetInfo().GetPaintOfst() )
            GetInfo().SetPaintOfst( nRepaintOfst );
    }

    CalcAdjustLine( m_pCurr );

    if( nOldHeight != m_pCurr->Height() || nOldAscent != m_pCurr->GetAscent() )
    {
        SetFlyInCntBase();
        GetInfo().SetPaintOfst( 0 ); // changed line height => no recycling
        // all following line must be painted and when Flys are around,
        // also formatted
        GetInfo().SetShift( true );
    }

    if ( IsFlyInCntBase() && !IsQuick() )
        UpdatePos( m_pCurr, GetTopLeft(), GetStart() );

    return nNewStart;
}

void SwTextFormatter::RecalcRealHeight()
{
    do
    {
        CalcRealHeight();
    } while (Next());
}

void SwTextFormatter::CalcRealHeight( bool bNewLine )
{
    sal_uInt16 nLineHeight = m_pCurr->Height();
    m_pCurr->SetClipping( false );

    SwTextGridItem const*const pGrid(GetGridItem(m_pFrame->FindPageFrame()));
    if ( pGrid && GetInfo().SnapToGrid() )
    {
        const sal_uInt16 nGridWidth = pGrid->GetBaseHeight();
        const sal_uInt16 nRubyHeight = pGrid->GetRubyHeight();
        const bool bRubyTop = ! pGrid->GetRubyTextBelow();

        nLineHeight = nGridWidth + nRubyHeight;
        const sal_uInt16 nAmpRatio = (m_pCurr->Height() + nLineHeight - 1)/nLineHeight;
        nLineHeight *= nAmpRatio;

        const sal_uInt16 nAsc = m_pCurr->GetAscent() +
                      ( bRubyTop ?
                       ( nLineHeight - m_pCurr->Height() + nRubyHeight ) / 2 :
                       ( nLineHeight - m_pCurr->Height() - nRubyHeight ) / 2 );

        m_pCurr->Height( nLineHeight, false );
        m_pCurr->SetAscent( nAsc );
        m_pInf->GetParaPortion()->SetFixLineHeight();

        // we ignore any line spacing options except from ...
        const SvxLineSpacingItem* pSpace = m_aLineInf.GetLineSpacing();
        if ( ! IsParaLine() && pSpace &&
             SvxInterLineSpaceRule::Prop == pSpace->GetInterLineSpaceRule() )
        {
            sal_uLong nTmp = pSpace->GetPropLineSpace();

            if( nTmp < 100 )
                nTmp = 100;

            nTmp *= nLineHeight;
            nLineHeight = static_cast<sal_uInt16>(nTmp / 100);
        }

        m_pCurr->SetRealHeight( nLineHeight );
        return;
    }

    // The dummy flag is set on lines that only contain flyportions, these shouldn't
    // consider register-true and so on. Unfortunately an empty line can be at
    // the end of a paragraph (empty paragraphs or behind a Shift-Return),
    // which should consider the register.
    if (!m_pCurr->IsDummy() || (!m_pCurr->GetNext()
            && GetStart() >= TextFrameIndex(GetTextFrame()->GetText().getLength())
            && !bNewLine))
    {
        const SvxLineSpacingItem *pSpace = m_aLineInf.GetLineSpacing();
        if( pSpace )
        {
            switch( pSpace->GetLineSpaceRule() )
            {
                case SvxLineSpaceRule::Auto:
                    // shrink first line of paragraph too on spacing < 100%
                    if (IsParaLine() &&
                        pSpace->GetInterLineSpaceRule() == SvxInterLineSpaceRule::Prop
                        && GetTextFrame()->GetDoc().getIDocumentSettingAccess().get(DocumentSettingId::PROP_LINE_SPACING_SHRINKS_FIRST_LINE))
                    {
                        tools::Long nTmp = pSpace->GetPropLineSpace();
                        // Word will render < 50% too but it's just not readable
                        if( nTmp < 50 )
                            nTmp = nTmp ? 50 : 100;
                        if (nTmp<100) { // code adapted from fixed line height
                            nTmp *= nLineHeight;
                            nTmp /= 100;
                            if( !nTmp )
                                ++nTmp;
                            nLineHeight = static_cast<sal_uInt16>(nTmp);
                            sal_uInt16 nAsc = ( 4 * nLineHeight ) / 5;  // 80%
#if 0
                            // could do clipping here (like Word does)
                            // but at 0.5 its unreadable either way...
                            if( nAsc < pCurr->GetAscent() ||
                                nLineHeight - nAsc < pCurr->Height() -
                                pCurr->GetAscent() )
                                pCurr->SetClipping( true );
#endif
                            m_pCurr->SetAscent( nAsc );
                            m_pCurr->Height( nLineHeight, false );
                            m_pInf->GetParaPortion()->SetFixLineHeight();
                        }
                    }
                break;
                case SvxLineSpaceRule::Min:
                {
                    if( nLineHeight < pSpace->GetLineHeight() )
                        nLineHeight = pSpace->GetLineHeight();
                    break;
                }
                case SvxLineSpaceRule::Fix:
                {
                    nLineHeight = pSpace->GetLineHeight();
                    const sal_uInt16 nAsc = ( 4 * nLineHeight ) / 5;  // 80%
                    if( nAsc < m_pCurr->GetAscent() ||
                        nLineHeight - nAsc < m_pCurr->Height() - m_pCurr->GetAscent() )
                        m_pCurr->SetClipping( true );
                    m_pCurr->Height( nLineHeight, false );
                    m_pCurr->SetAscent( nAsc );
                    m_pInf->GetParaPortion()->SetFixLineHeight();
                }
                break;
                default: OSL_FAIL( ": unknown LineSpaceRule" );
            }
            // Note: for the _first_ line the line spacing of the previous
            // paragraph is applied in SwFlowFrame::CalcUpperSpace()
            if( !IsParaLine() )
                switch( pSpace->GetInterLineSpaceRule() )
                {
                    case SvxInterLineSpaceRule::Off:
                    break;
                    case SvxInterLineSpaceRule::Prop:
                    {
                        tools::Long nTmp = pSpace->GetPropLineSpace();
                        // 50% is the minimum, if 0% we switch to the
                        // default value 100% ...
                        if( nTmp < 50 )
                            nTmp = nTmp ? 50 : 100;

                        // extend line height by (nPropLineSpace - 100) percent of the font height
                        nTmp -= 100;
                        nTmp *= m_pCurr->GetTextHeight();
                        nTmp /= 100;
                        nTmp += nLineHeight;
                        if (nTmp < 1)
                            nTmp = 1;
                        nLineHeight = static_cast<sal_uInt16>(nTmp);
                        break;
                    }
                    case SvxInterLineSpaceRule::Fix:
                    {
                        nLineHeight = nLineHeight + pSpace->GetInterLineSpace();
                        break;
                    }
                    default: OSL_FAIL( ": unknown InterLineSpaceRule" );
                }
        }

        if( IsRegisterOn() )
        {
            SwTwips nTmpY = Y() + m_pCurr->GetAscent() + nLineHeight - m_pCurr->Height();
            SwRectFnSet aRectFnSet(m_pFrame);
            if ( aRectFnSet.IsVert() )
                nTmpY = m_pFrame->SwitchHorizontalToVertical( nTmpY );
            nTmpY = aRectFnSet.YDiff( nTmpY, RegStart() );
            const sal_uInt16 nDiff = sal_uInt16( nTmpY % RegDiff() );
            if( nDiff )
                nLineHeight += RegDiff() - nDiff;
        }
    }
    m_pCurr->SetRealHeight( nLineHeight );
}

void SwTextFormatter::FeedInf( SwTextFormatInfo &rInf ) const
{
    // delete Fly in any case!
    ClearFly( rInf );
    rInf.Init();

    rInf.ChkNoHyph( CntEndHyph(), CntMidHyph() );
    rInf.SetRoot( m_pCurr );
    rInf.SetLineStart( m_nStart );
    rInf.SetIdx( m_nStart );
    rInf.Left( Left() );
    rInf.Right( Right() );
    rInf.First( FirstLeft() );
    rInf.LeftMargin(GetLeftMargin());

    rInf.RealWidth( sal_uInt16(rInf.Right() - GetLeftMargin()) );
    rInf.Width( rInf.RealWidth() );
    if( const_cast<SwTextFormatter*>(this)->GetRedln() )
    {
        const_cast<SwTextFormatter*>(this)->GetRedln()->Clear( const_cast<SwTextFormatter*>(this)->GetFnt() );
        const_cast<SwTextFormatter*>(this)->GetRedln()->Reset();
    }
}

void SwTextFormatter::FormatReset( SwTextFormatInfo &rInf )
{
    m_pFirstOfBorderMerge = nullptr;
    m_pCurr->Truncate();
    m_pCurr->Init();

    // delete pSpaceAdd and pKanaComp
    m_pCurr->FinishSpaceAdd();
    m_pCurr->FinishKanaComp();
    m_pCurr->ResetFlags();
    FeedInf( rInf );
}

bool SwTextFormatter::CalcOnceMore()
{
    if( m_pDropFormat )
    {
        const sal_uInt16 nOldDrop = GetDropHeight();
        CalcDropHeight( m_pDropFormat->GetLines() );
        m_bOnceMore = nOldDrop != GetDropHeight();
    }
    else
        m_bOnceMore = false;
    return m_bOnceMore;
}

SwTwips SwTextFormatter::CalcBottomLine() const
{
    SwTwips nRet = Y() + GetLineHeight();
    SwTwips nMin = GetInfo().GetTextFly().GetMinBottom();
    if( nMin && ++nMin > nRet )
    {
        SwTwips nDist = m_pFrame->getFrameArea().Height() - m_pFrame->getFramePrintArea().Height()
                        - m_pFrame->getFramePrintArea().Top();
        if( nRet + nDist < nMin )
        {
            const bool bRepaint = HasTruncLines() &&
                GetInfo().GetParaPortion()->GetRepaint().Bottom() == nRet-1;
            nRet = nMin - nDist;
            if( bRepaint )
            {
                const_cast<SwRepaint&>(GetInfo().GetParaPortion()
                    ->GetRepaint()).Bottom( nRet-1 );
                const_cast<SwTextFormatInfo&>(GetInfo()).SetPaintOfst( 0 );
            }
        }
    }
    return nRet;
}

// FME/OD: This routine does a limited text formatting.
SwTwips SwTextFormatter::CalcFitToContent_()
{
    FormatReset( GetInfo() );
    BuildPortions( GetInfo() );
    m_pCurr->CalcLine( *this, GetInfo() );
    return m_pCurr->Width();
}

// determines if the calculation of a repaint offset is allowed
// otherwise each line is painted from 0 (this is a copy of the beginning
// of the former SwTextFormatter::Recycle() function
bool SwTextFormatter::AllowRepaintOpt() const
{
    // reformat position in front of current line? Only in this case
    // we want to set the repaint offset
    bool bOptimizeRepaint = m_nStart < GetInfo().GetReformatStart() &&
                                m_pCurr->GetLen();

    // a special case is the last line of a block adjusted paragraph:
    if ( bOptimizeRepaint )
    {
        switch( GetAdjust() )
        {
        case SvxAdjust::Block:
        {
            if( IsLastBlock() || IsLastCenter() )
                bOptimizeRepaint = false;
            else
            {
                // ????: blank in the last master line (blocksat.sdw)
                bOptimizeRepaint = nullptr == m_pCurr->GetNext() && !m_pFrame->GetFollow();
                if ( bOptimizeRepaint )
                {
                    SwLinePortion *pPos = m_pCurr->GetFirstPortion();
                    while ( pPos && !pPos->IsFlyPortion() )
                        pPos = pPos->GetNextPortion();
                    bOptimizeRepaint = !pPos;
                }
            }
            break;
        }
        case SvxAdjust::Center:
        case SvxAdjust::Right:
            bOptimizeRepaint = false;
            break;
        default: ;
        }
    }

    // Again another special case: invisible SoftHyphs
    const TextFrameIndex nReformat = GetInfo().GetReformatStart();
    if (bOptimizeRepaint && TextFrameIndex(COMPLETE_STRING) != nReformat)
    {
        const sal_Unicode cCh = nReformat >= TextFrameIndex(GetInfo().GetText().getLength())
            ? 0
            : GetInfo().GetText()[ sal_Int32(nReformat) ];
        bOptimizeRepaint = ( CH_TXTATR_BREAKWORD != cCh && CH_TXTATR_INWORD != cCh )
                            || ! GetInfo().HasHint( nReformat );
    }

    return bOptimizeRepaint;
}

void SwTextFormatter::CalcUnclipped( SwTwips& rTop, SwTwips& rBottom )
{
    OSL_ENSURE( ! m_pFrame->IsVertical() || m_pFrame->IsSwapped(),
            "SwTextFormatter::CalcUnclipped with unswapped frame" );

    SwTwips nFlyAsc, nFlyDesc;
    m_pCurr->MaxAscentDescent( rTop, rBottom, nFlyAsc, nFlyDesc );
    rTop = Y() + GetCurr()->GetAscent();
    rBottom = rTop + nFlyDesc;
    rTop -= nFlyAsc;
}

void SwTextFormatter::UpdatePos( SwLineLayout *pCurrent, Point aStart,
    TextFrameIndex const nStartIdx, bool bAlways) const
{
    OSL_ENSURE( ! m_pFrame->IsVertical() || m_pFrame->IsSwapped(),
            "SwTextFormatter::UpdatePos with unswapped frame" );

    if( GetInfo().IsTest() )
        return;
    SwLinePortion *pFirst = pCurrent->GetFirstPortion();
    SwLinePortion *pPos = pFirst;
    SwTextPaintInfo aTmpInf( GetInfo() );
    aTmpInf.SetpSpaceAdd( pCurrent->GetpLLSpaceAdd() );
    aTmpInf.ResetSpaceIdx();
    aTmpInf.SetKanaComp( pCurrent->GetpKanaComp() );
    aTmpInf.ResetKanaIdx();

    // The frame's size
    aTmpInf.SetIdx( nStartIdx );
    aTmpInf.SetPos( aStart );

    SwTwips nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc;
    pCurrent->MaxAscentDescent( nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc );

    const sal_uInt16 nTmpHeight = pCurrent->GetRealHeight();
    sal_uInt16 nAscent = pCurrent->GetAscent() + nTmpHeight - pCurrent->Height();
    AsCharFlags nFlags = AsCharFlags::UlSpace;
    if( GetMulti() )
    {
        aTmpInf.SetDirection( GetMulti()->GetDirection() );
        if( GetMulti()->HasRotation() )
        {
            nFlags |= AsCharFlags::Rotate;
            if( GetMulti()->IsRevers() )
            {
                nFlags |= AsCharFlags::Reverse;
                aTmpInf.X( aTmpInf.X() - nAscent );
            }
            else
                aTmpInf.X( aTmpInf.X() + nAscent );
        }
        else
        {
            if ( GetMulti()->IsBidi() )
                nFlags |= AsCharFlags::Bidi;
            aTmpInf.Y( aTmpInf.Y() + nAscent );
        }
    }
    else
        aTmpInf.Y( aTmpInf.Y() + nAscent );

    while( pPos )
    {
        // We only know one case where changing the position (caused by the
        // adjustment) could be relevant for a portion: We need to SetRefPoint
        // for FlyCntPortions.
        if( ( pPos->IsFlyCntPortion() || pPos->IsGrfNumPortion() )
            && ( bAlways || !IsQuick() ) )
        {
            pCurrent->MaxAscentDescent( nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc, pPos );

            if( pPos->IsGrfNumPortion() )
            {
                if( !nFlyAsc && !nFlyDesc )
                {
                    nTmpAscent = nAscent;
                    nFlyAsc = nAscent;
                    nTmpDescent = nTmpHeight - nAscent;
                    nFlyDesc = nTmpDescent;
                }
                static_cast<SwGrfNumPortion*>(pPos)->SetBase( nTmpAscent, nTmpDescent,
                                                   nFlyAsc, nFlyDesc );
            }
            else
            {
                Point aBase( aTmpInf.GetPos() );
                if ( GetInfo().GetTextFrame()->IsVertical() )
                    GetInfo().GetTextFrame()->SwitchHorizontalToVertical( aBase );

                static_cast<SwFlyCntPortion*>(pPos)->SetBase( *aTmpInf.GetTextFrame(),
                    aBase, nTmpAscent, nTmpDescent, nFlyAsc,
                    nFlyDesc, nFlags );
            }
        }
        if( pPos->IsMultiPortion() && static_cast<SwMultiPortion*>(pPos)->HasFlyInContent() )
        {
            OSL_ENSURE( !GetMulti(), "Too much multi" );
            const_cast<SwTextFormatter*>(this)->m_pMulti = static_cast<SwMultiPortion*>(pPos);
            SwLineLayout *pLay = &GetMulti()->GetRoot();
            Point aSt( aTmpInf.X(), aStart.Y() );

            if ( GetMulti()->HasBrackets() )
            {
                OSL_ENSURE( GetMulti()->IsDouble(), "Brackets only for doubles");
                aSt.AdjustX(static_cast<SwDoubleLinePortion*>(GetMulti())->PreWidth() );
            }
            else if( GetMulti()->HasRotation() )
            {
                aSt.AdjustY(pCurrent->GetAscent() - GetMulti()->GetAscent() );
                if( GetMulti()->IsRevers() )
                    aSt.AdjustX(GetMulti()->Width() );
                else
                    aSt.AdjustY(GetMulti()->Height() );
               }
            else if ( GetMulti()->IsBidi() )
                // jump to end of the bidi portion
                aSt.AdjustX(pLay->Width() );

            TextFrameIndex nStIdx = aTmpInf.GetIdx();
            do
            {
                UpdatePos( pLay, aSt, nStIdx, bAlways );
                nStIdx = nStIdx + pLay->GetLen();
                aSt.AdjustY(pLay->Height() );
                pLay = pLay->GetNext();
            } while ( pLay );
            const_cast<SwTextFormatter*>(this)->m_pMulti = nullptr;
        }
        pPos->Move( aTmpInf );
        pPos = pPos->GetNextPortion();
    }
}

void SwTextFormatter::AlignFlyInCntBase( tools::Long nBaseLine ) const
{
    OSL_ENSURE( ! m_pFrame->IsVertical() || m_pFrame->IsSwapped(),
            "SwTextFormatter::AlignFlyInCntBase with unswapped frame" );

    if( GetInfo().IsTest() )
        return;
    SwLinePortion *pFirst = m_pCurr->GetFirstPortion();
    SwLinePortion *pPos = pFirst;
    AsCharFlags nFlags = AsCharFlags::None;
    if( GetMulti() && GetMulti()->HasRotation() )
    {
        nFlags |= AsCharFlags::Rotate;
        if( GetMulti()->IsRevers() )
            nFlags |= AsCharFlags::Reverse;
    }

    SwTwips nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc;

    while( pPos )
    {
        if( pPos->IsFlyCntPortion() || pPos->IsGrfNumPortion() )
        {
            m_pCurr->MaxAscentDescent( nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc, pPos );

            if( pPos->IsGrfNumPortion() )
                static_cast<SwGrfNumPortion*>(pPos)->SetBase( nTmpAscent, nTmpDescent,
                                                   nFlyAsc, nFlyDesc );
            else
            {
                Point aBase;
                if ( GetInfo().GetTextFrame()->IsVertical() )
                {
                    nBaseLine = GetInfo().GetTextFrame()->SwitchHorizontalToVertical( nBaseLine );
                    aBase = Point( nBaseLine, static_cast<SwFlyCntPortion*>(pPos)->GetRefPoint().Y() );
                }
                else
                    aBase = Point( static_cast<SwFlyCntPortion*>(pPos)->GetRefPoint().X(), nBaseLine );

                static_cast<SwFlyCntPortion*>(pPos)->SetBase( *GetInfo().GetTextFrame(), aBase, nTmpAscent, nTmpDescent,
                    nFlyAsc, nFlyDesc, nFlags );
            }
        }
        pPos = pPos->GetNextPortion();
    }
}

bool SwTextFormatter::ChkFlyUnderflow( SwTextFormatInfo &rInf ) const
{
    OSL_ENSURE( rInf.GetTextFly().IsOn(), "SwTextFormatter::ChkFlyUnderflow: why?" );
    if( GetCurr() )
    {
        // First we check, whether a fly overlaps with the line.
        // = GetLineHeight()
        const sal_uInt16 nHeight = GetCurr()->GetRealHeight();
        SwRect aLine( GetLeftMargin(), Y(), rInf.RealWidth(), nHeight );

        SwRect aLineVert( aLine );
        if ( m_pFrame->IsVertical() )
            m_pFrame->SwitchHorizontalToVertical( aLineVert );
        SwRect aInter( rInf.GetTextFly().GetFrame( aLineVert ) );
        if ( m_pFrame->IsVertical() )
            m_pFrame->SwitchVerticalToHorizontal( aInter );

        if( !aInter.HasArea() )
            return false;

        // We now check every portion that could have lowered for overlapping
        // with the fly.
        const SwLinePortion *pPos = GetCurr()->GetFirstPortion();
        aLine.Pos().setY( Y() + GetCurr()->GetRealHeight() - GetCurr()->Height() );
        aLine.Height( GetCurr()->Height() );

        while( pPos )
        {
            aLine.Width( pPos->Width() );

            aLineVert = aLine;
            if ( m_pFrame->IsVertical() )
                m_pFrame->SwitchHorizontalToVertical( aLineVert );
            aInter = rInf.GetTextFly().GetFrame( aLineVert );
            if ( m_pFrame->IsVertical() )
                m_pFrame->SwitchVerticalToHorizontal( aInter );

            // New flys from below?
            if( !pPos->IsFlyPortion() )
            {
                if( aInter.IsOver( aLine ) )
                {
                    aInter.Intersection_( aLine );
                    if( aInter.HasArea() )
                    {
                        // To be evaluated during reformat of this line:
                        // RealHeight including spacing
                        rInf.SetLineHeight( nHeight );
                        // Height without extra spacing
                        rInf.SetLineNetHeight( m_pCurr->Height() );
                        return true;
                    }
                }
            }
            else
            {
                // The fly portion is not intersected by a fly anymore
                if ( ! aInter.IsOver( aLine ) )
                {
                    rInf.SetLineHeight( nHeight );
                    rInf.SetLineNetHeight( m_pCurr->Height() );
                    return true;
                }
                else
                {
                    aInter.Intersection_( aLine );

                    // No area means a fly has become invalid because of
                    // lowering the line => reformat the line
                    // we also have to reformat the line, if the fly size
                    // differs from the intersection interval's size.
                    if( ! aInter.HasArea() ||
                        static_cast<const SwFlyPortion*>(pPos)->GetFixWidth() != aInter.Width() )
                    {
                        rInf.SetLineHeight( nHeight );
                        rInf.SetLineNetHeight( m_pCurr->Height() );
                        return true;
                    }
                }
            }

            aLine.Left( aLine.Left() + pPos->Width() );
            pPos = pPos->GetNextPortion();
        }
    }
    return false;
}

void SwTextFormatter::CalcFlyWidth( SwTextFormatInfo &rInf )
{
    if( GetMulti() || rInf.GetFly() )
        return;

    SwTextFly& rTextFly = rInf.GetTextFly();
    if( !rTextFly.IsOn() || rInf.IsIgnoreFly() )
        return;

    const SwLinePortion *pLast = rInf.GetLast();

    tools::Long nAscent;
    tools::Long nTop = Y();
    tools::Long nHeight;

    if( rInf.GetLineHeight() )
    {
        // Real line height has already been calculated, we only have to
        // search for intersections in the lower part of the strip
        nAscent = m_pCurr->GetAscent();
        nHeight = rInf.GetLineNetHeight();
        nTop += rInf.GetLineHeight() - nHeight;
    }
    else
    {
        // We make a first guess for the lines real height
        if ( ! m_pCurr->GetRealHeight() )
            CalcRealHeight();

        nAscent = pLast->GetAscent();
        nHeight = pLast->Height();

        if ( m_pCurr->GetRealHeight() > nHeight )
            nTop += m_pCurr->GetRealHeight() - nHeight;
        else
            // Important for fixed space between lines
            nHeight = m_pCurr->GetRealHeight();
    }

    const tools::Long nLeftMar = GetLeftMargin();
    const tools::Long nLeftMin = (rInf.X() || GetDropLeft()) ? nLeftMar : GetLeftMin();

    SwRect aLine( rInf.X() + nLeftMin, nTop, rInf.RealWidth() - rInf.X()
                  + nLeftMar - nLeftMin , nHeight );

    // tdf#116486: consider also the upper margin from getFramePrintArea because intersections
    //             with this additional space should lead to repositioning of paragraphs
    //             For compatibility we grab a related compat flag:
    if (GetTextFrame()->GetDoc().getIDocumentSettingAccess().get(DocumentSettingId::ADD_VERTICAL_FLY_OFFSETS)
        && IsFirstTextLine())
    {
        const tools::Long nUpper = m_pFrame->getFramePrintArea().Top();
        // Increase the rectangle
        if( nUpper > 0 && nTop >= nUpper  )
            aLine.SubTop( nUpper );
    }
    SwRect aLineVert( aLine );
    if ( m_pFrame->IsRightToLeft() )
        m_pFrame->SwitchLTRtoRTL( aLineVert );

    if ( m_pFrame->IsVertical() )
        m_pFrame->SwitchHorizontalToVertical( aLineVert );

    // GetFrame(...) determines and returns the intersection rectangle
    SwRect aInter( rTextFly.GetFrame( aLineVert ) );

    if ( m_pFrame->IsRightToLeft() )
        m_pFrame->SwitchRTLtoLTR( aInter );

    if ( m_pFrame->IsVertical() )
        m_pFrame->SwitchVerticalToHorizontal( aInter );

    if (!aInter.IsEmpty() && aInter.Bottom() < nTop)
    {
        // Intersects with the frame area (with upper margin), but not with the print area (without
        // upper margin). Don't reserve space for the fly portion in this case, text is allowed to
        // flow there.
        aInter.Height(0);
    }

    if( !aInter.IsOver( aLine ) )
        return;

    aLine.Left( rInf.X() + nLeftMar );
    bool bForced = false;
    if( aInter.Left() <= nLeftMin )
    {
        SwTwips nFrameLeft = GetTextFrame()->getFrameArea().Left();
        if( GetTextFrame()->getFramePrintArea().Left() < 0 )
            nFrameLeft += GetTextFrame()->getFramePrintArea().Left();
        if( aInter.Left() < nFrameLeft )
            aInter.Left( nFrameLeft );

        tools::Long nAddMar = 0;
        if ( m_pFrame->IsRightToLeft() )
        {
            nAddMar = m_pFrame->getFrameArea().Right() - Right();
            if ( nAddMar < 0 )
                nAddMar = 0;
        }
        else
            nAddMar = nLeftMar - nFrameLeft;

        aInter.Width( aInter.Width() + nAddMar );
        // For a negative first line indent, we set this flag to show
        // that the indentation/margin has been moved.
        // This needs to be respected by the DefaultTab at the zero position.
        if( IsFirstTextLine() && HasNegFirst() )
            bForced = true;
    }
    aInter.Intersection( aLine );
    if( !aInter.HasArea() )
        return;

    const bool bFullLine =  aLine.Left()  == aInter.Left() &&
                            aLine.Right() == aInter.Right();

    // Although no text is left, we need to format another line,
    // because also empty lines need to avoid a Fly with no wrapping.
    if (bFullLine && rInf.GetIdx() == TextFrameIndex(rInf.GetText().getLength()))
    {
        rInf.SetNewLine( true );
        // We know that for dummies, it holds ascent == height
        m_pCurr->SetDummy(true);
    }

    // aInter becomes frame-local
    aInter.Pos().AdjustX( -nLeftMar );
    SwFlyPortion *pFly = new SwFlyPortion( aInter );
    if( bForced )
    {
        m_pCurr->SetForcedLeftMargin();
        rInf.ForcedLeftMargin( static_cast<sal_uInt16>(aInter.Width()) );
    }

    if( bFullLine )
    {
        // In order to properly flow around Flys with different
        // wrapping attributes, we need to increase by units of line height.
        // The last avoiding line should be adjusted in height, so that
        // we don't get a frame spacing effect.
        // It is important that ascent == height, because the FlyPortion
        // values are transferred to pCurr in CalcLine and IsDummy() relies
        // on this behaviour.
        // To my knowledge we only have two places where DummyLines can be
        // created: here and in MakeFlyDummies.
        // IsDummy() is evaluated in IsFirstTextLine(), when moving lines
        // and in relation with DropCaps.
        pFly->Height( sal_uInt16(aInter.Height()) );

        // nNextTop now contains the margin's bottom edge, which we avoid
        // or the next margin's top edge, which we need to respect.
        // That means we can comfortably grow up to this value; that's how
        // we save a few empty lines.
        tools::Long nNextTop = rTextFly.GetNextTop();
        if ( m_pFrame->IsVertical() )
            nNextTop = m_pFrame->SwitchVerticalToHorizontal( nNextTop );
        if( nNextTop > aInter.Bottom() )
        {
            SwTwips nH = nNextTop - aInter.Top();
            if( nH < SAL_MAX_UINT16 )
                pFly->Height( sal_uInt16( nH ) );
        }
        if( nAscent < pFly->Height() )
            pFly->SetAscent( sal_uInt16(nAscent) );
        else
            pFly->SetAscent( pFly->Height() );
    }
    else
    {
        if (rInf.GetIdx() == TextFrameIndex(rInf.GetText().getLength()))
        {
            // Don't use nHeight, or we have a huge descent
            pFly->Height( pLast->Height() );
            pFly->SetAscent( pLast->GetAscent() );
        }
        else
        {
            pFly->Height( sal_uInt16(aInter.Height()) );
            if( nAscent < pFly->Height() )
                pFly->SetAscent( sal_uInt16(nAscent) );
            else
                pFly->SetAscent( pFly->Height() );
        }
    }

    rInf.SetFly( pFly );

    if( pFly->GetFix() < rInf.Width() )
        rInf.Width( pFly->GetFix() );

    SwTextGridItem const*const pGrid(GetGridItem(m_pFrame->FindPageFrame()));
    if ( !pGrid )
        return;

    const SwPageFrame* pPageFrame = m_pFrame->FindPageFrame();
    const SwLayoutFrame* pBody = pPageFrame->FindBodyCont();

    SwRectFnSet aRectFnSet(pPageFrame);

    const tools::Long nGridOrigin = pBody ?
                            aRectFnSet.GetPrtLeft(*pBody) :
                            aRectFnSet.GetPrtLeft(*pPageFrame);

    const SwDoc & rDoc = rInf.GetTextFrame()->GetDoc();
    const sal_uInt16 nGridWidth = GetGridWidth(*pGrid, rDoc);

    SwTwips nStartX = GetLeftMargin();
    if ( aRectFnSet.IsVert() )
    {
        Point aPoint( nStartX, 0 );
        m_pFrame->SwitchHorizontalToVertical( aPoint );
        nStartX = aPoint.Y();
    }

    const SwTwips nOfst = nStartX - nGridOrigin;
    const SwTwips nTmpWidth = rInf.Width() + nOfst;

    const sal_uLong i = nTmpWidth / nGridWidth + 1;

    const tools::Long nNewWidth = ( i - 1 ) * nGridWidth - nOfst;
    if ( nNewWidth > 0 )
        rInf.Width( static_cast<sal_uInt16>(nNewWidth) );
    else
        rInf.Width( 0 );


}

SwFlyCntPortion *SwTextFormatter::NewFlyCntPortion( SwTextFormatInfo &rInf,
                                                   SwTextAttr *pHint ) const
{
    const SwFrame *pFrame = m_pFrame;

    SwFlyInContentFrame *pFly;
    SwFrameFormat* pFrameFormat = static_cast<SwTextFlyCnt*>(pHint)->GetFlyCnt().GetFrameFormat();
    if( RES_FLYFRMFMT == pFrameFormat->Which() )
        pFly = static_cast<SwTextFlyCnt*>(pHint)->GetFlyFrame(pFrame);
    else
        pFly = nullptr;
    // aBase is the document-global position, from which the new extra portion is placed
    // aBase.X() = Offset in the line after the current position
    // aBase.Y() = LineIter.Y() + Ascent of the current position

    SwTwips nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc;
    // i#11859 - use new method <SwLineLayout::MaxAscentDescent(..)>
    // to change line spacing behaviour at paragraph - Compatibility to MS Word
    //SwLinePortion *pPos = pCurr->GetFirstPortion();
    //lcl_MaxAscDescent( pPos, nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc );
    m_pCurr->MaxAscentDescent( nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc );

    // If the ascent of the frame is larger than the ascent of the current position,
    // we use this one when calculating the base, or the frame would be positioned
    // too much to the top, sliding down after all causing a repaint in an area
    // he actually never was in.
    sal_uInt16 nAscent = 0;

    const bool bTextFrameVertical = GetInfo().GetTextFrame()->IsVertical();

    const bool bUseFlyAscent = pFly && pFly->isFrameAreaPositionValid() &&
                               0 != ( bTextFrameVertical ?
                                      pFly->GetRefPoint().X() :
                                      pFly->GetRefPoint().Y() );

    if ( bUseFlyAscent )
         nAscent = static_cast<sal_uInt16>( std::abs( int( bTextFrameVertical ?
                                                  pFly->GetRelPos().X() :
                                                  pFly->GetRelPos().Y() ) ) );

    // Check if be prefer to use the ascent of the last portion:
    if ( IsQuick() ||
         !bUseFlyAscent ||
         nAscent < rInf.GetLast()->GetAscent() )
    {
        nAscent = rInf.GetLast()->GetAscent();
    }
    else if( nAscent > nFlyAsc )
        nFlyAsc = nAscent;

    Point aBase( GetLeftMargin() + rInf.X(), Y() + nAscent );
    AsCharFlags nMode = IsQuick() ? AsCharFlags::Quick : AsCharFlags::None;
    if( GetMulti() && GetMulti()->HasRotation() )
    {
        nMode |= AsCharFlags::Rotate;
        if( GetMulti()->IsRevers() )
            nMode |= AsCharFlags::Reverse;
    }

    Point aTmpBase( aBase );
    if ( GetInfo().GetTextFrame()->IsVertical() )
        GetInfo().GetTextFrame()->SwitchHorizontalToVertical( aTmpBase );

    SwFlyCntPortion* pRet(nullptr);
    if( pFly )
    {
        pRet = sw::FlyContentPortion::Create(*GetInfo().GetTextFrame(), pFly, aTmpBase, nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc, nMode);
        // We need to make sure that our font is set again in the OutputDevice
        // It could be that the FlyInCnt was added anew and GetFlyFrame() would
        // in turn cause, that it'd be created anew again.
        // This one's frames get formatted right away, which change the font.
        rInf.SelectFont();
        if( pRet->GetAscent() > nAscent )
        {
            aBase.setY( Y() + pRet->GetAscent() );
            nMode |= AsCharFlags::UlSpace;
            if( !rInf.IsTest() )
            {
                aTmpBase = aBase;
                if ( GetInfo().GetTextFrame()->IsVertical() )
                    GetInfo().GetTextFrame()->SwitchHorizontalToVertical( aTmpBase );

                pRet->SetBase( *rInf.GetTextFrame(), aTmpBase, nTmpAscent,
                               nTmpDescent, nFlyAsc, nFlyDesc, nMode );
            }
        }
    }
    else
    {
        pRet = sw::DrawFlyCntPortion::Create(*rInf.GetTextFrame(), *pFrameFormat, aTmpBase, nTmpAscent, nTmpDescent, nFlyAsc, nFlyDesc, nMode);
    }
    return pRet;
}

/* Drop portion is a special case, because it has parts which aren't portions
   but we have handle them just like portions */
void SwTextFormatter::MergeCharacterBorder( SwDropPortion const & rPortion )
{
    if( rPortion.GetLines() <= 1 )
        return;

    SwDropPortionPart* pCurrPart = rPortion.GetPart();
    while( pCurrPart )
    {
        if( pCurrPart->GetFollow() &&
            ::lcl_HasSameBorder(pCurrPart->GetFont(), pCurrPart->GetFollow()->GetFont()) )
        {
            pCurrPart->SetJoinBorderWithNext(true);
            pCurrPart->GetFollow()->SetJoinBorderWithPrev(true);
        }
        pCurrPart = pCurrPart->GetFollow();
    }
}

void SwTextFormatter::MergeCharacterBorder( SwLinePortion& rPortion, SwLinePortion const *pPrev, SwTextFormatInfo& rInf )
{
    const SwFont aCurFont = *rInf.GetFont();
    if( !aCurFont.HasBorder() )
        return;

    if (pPrev && pPrev->GetJoinBorderWithNext() )
    {
        // In some case border merge is called twice to the portion
        if( !rPortion.GetJoinBorderWithPrev() )
        {
            rPortion.SetJoinBorderWithPrev(true);
            if( rPortion.InTextGrp() && rPortion.Width() > aCurFont.GetLeftBorderSpace() )
                rPortion.Width(rPortion.Width() - aCurFont.GetLeftBorderSpace());
        }
    }
    else
    {
        rPortion.SetJoinBorderWithPrev(false);
        m_pFirstOfBorderMerge = &rPortion;
    }

    // Get next portion's font
    bool bSeek = false;
    if (!rInf.IsFull() && // Not the last portion of the line (in case of line break)
        rInf.GetIdx() + rPortion.GetLen() != TextFrameIndex(rInf.GetText().getLength())) // Not the last portion of the paragraph
    {
        bSeek = Seek(rInf.GetIdx() + rPortion.GetLen());
    }
    // Don't join the next portion if SwKernPortion sits between two different boxes.
    bool bDisconnect = rPortion.IsKernPortion() && !rPortion.GetJoinBorderWithPrev();
    // If next portion has the same border then merge
    if( bSeek && GetFnt()->HasBorder() && ::lcl_HasSameBorder(aCurFont, *GetFnt()) && !bDisconnect )
    {
        // In some case border merge is called twice to the portion
        if( !rPortion.GetJoinBorderWithNext() )
        {
            rPortion.SetJoinBorderWithNext(true);
            if( rPortion.InTextGrp() && rPortion.Width() > aCurFont.GetRightBorderSpace() )
                rPortion.Width(rPortion.Width() - aCurFont.GetRightBorderSpace());
        }
    }
    // If this is the last portion of the merge group then make the real height merge
    else
    {
        rPortion.SetJoinBorderWithNext(false);
        if( m_pFirstOfBorderMerge != &rPortion )
        {
            // Calculate maximum height and ascent
            SwLinePortion* pActPor = m_pFirstOfBorderMerge;
            sal_uInt16 nMaxAscent = 0;
            sal_uInt16 nMaxHeight = 0;
            bool bReachCurrent = false;
            while( pActPor )
            {
                if( nMaxHeight < pActPor->Height() )
                    nMaxHeight = pActPor->Height();
                if( nMaxAscent < pActPor->GetAscent() )
                    nMaxAscent = pActPor->GetAscent();

                pActPor = pActPor->GetNextPortion();
                if( !pActPor && !bReachCurrent )
                {
                    pActPor = &rPortion;
                    bReachCurrent = true;
                }
            }

            // Change all portion's height and ascent
            pActPor = m_pFirstOfBorderMerge;
            bReachCurrent = false;
            while( pActPor )
            {
                if( nMaxHeight > pActPor->Height() )
                    pActPor->Height(nMaxHeight);
                if( nMaxAscent > pActPor->GetAscent() )
                    pActPor->SetAscent(nMaxAscent);

                pActPor = pActPor->GetNextPortion();
                if( !pActPor && !bReachCurrent )
                {
                    pActPor = &rPortion;
                    bReachCurrent = true;
                }
            }
            m_pFirstOfBorderMerge = nullptr;
        }
    }
    Seek(rInf.GetIdx());
}

namespace {
    // calculates and sets optimal repaint offset for the current line
    tools::Long lcl_CalcOptRepaint( SwTextFormatter &rThis,
                         SwLineLayout const &rCurr,
                         TextFrameIndex const nOldLineEnd,
                         const std::vector<tools::Long> &rFlyStarts )
    {
        SwTextFormatInfo& txtFormatInfo = rThis.GetInfo();
        if ( txtFormatInfo.GetIdx() < txtFormatInfo.GetReformatStart() )
        // the reformat position is behind our new line, that means
        // something of our text has moved to the next line
            return 0;

        TextFrameIndex nReformat = std::min(txtFormatInfo.GetReformatStart(), nOldLineEnd);

        // in case we do not have any fly in our line, our repaint position
        // is the changed position - 1
        if ( rFlyStarts.empty() && ! rCurr.IsFly() )
        {
            // this is the maximum repaint offset determined during formatting
            // for example: the beginning of the first right tab stop
            // if this value is 0, this means that we do not have an upper
            // limit for the repaint offset
            const tools::Long nFormatRepaint = txtFormatInfo.GetPaintOfst();

            if (nReformat < txtFormatInfo.GetLineStart() + TextFrameIndex(3))
                return 0;

            // step back two positions for smoother repaint
            nReformat -= TextFrameIndex(2);

            // i#28795, i#34607, i#38388
            // step back more characters, this is required by complex scripts
            // e.g., for Khmer (thank you, Javier!)
            static const TextFrameIndex nMaxContext(10);
            if (nReformat > txtFormatInfo.GetLineStart() + nMaxContext)
                nReformat = nReformat - nMaxContext;
            else
            {
                nReformat = txtFormatInfo.GetLineStart();
                //reset the margin flag - prevent loops
                SwTextCursor::SetRightMargin(false);
            }

            // Weird situation: Our line used to end with a hole portion
            // and we delete some characters at the end of our line. We have
            // to take care for repainting the blanks which are not anymore
            // covered by the hole portion
            while ( nReformat > txtFormatInfo.GetLineStart() &&
                    CH_BLANK == txtFormatInfo.GetChar( nReformat ) )
                --nReformat;

            OSL_ENSURE( nReformat < txtFormatInfo.GetIdx(), "Reformat too small for me!" );
            SwRect aRect;

            // Note: GetChareRect is not const. It definitely changes the
            // bMulti flag. We have to save and restore the old value.
            bool bOldMulti = txtFormatInfo.IsMulti();
            rThis.GetCharRect( &aRect, nReformat );
            txtFormatInfo.SetMulti( bOldMulti );

            return nFormatRepaint ? std::min( aRect.Left(), nFormatRepaint ) :
                                    aRect.Left();
        }
        else
        {
            // nReformat may be wrong, if something around flys has changed:
            // we compare the former and the new fly positions in this line
            // if anything has changed, we carefully have to adjust the right
            // repaint position
            tools::Long nPOfst = 0;
            size_t nCnt = 0;
            tools::Long nX = 0;
            TextFrameIndex nIdx = rThis.GetInfo().GetLineStart();
            SwLinePortion* pPor = rCurr.GetFirstPortion();

            while ( pPor )
            {
                if ( pPor->IsFlyPortion() )
                {
                    // compare start of fly with former start of fly
                    if (nCnt < rFlyStarts.size() &&
                        nX == rFlyStarts[ nCnt ] &&
                        nIdx < nReformat
                    )
                        // found fix position, nothing has changed left from nX
                        nPOfst = nX + pPor->Width();
                    else
                        break;

                    nCnt++;
                }
                nX = nX + pPor->Width();
                nIdx = nIdx + pPor->GetLen();
                pPor = pPor->GetNextPortion();
            }

            return nPOfst + rThis.GetLeftMargin();
        }
    }

    // Determine if we need to build hidden portions
    bool lcl_BuildHiddenPortion(const SwTextSizeInfo& rInf, TextFrameIndex & rPos)
    {
        // Only if hidden text should not be shown:
    //    if ( rInf.GetVsh() && rInf.GetVsh()->GetWin() && rInf.GetOpt().IsShowHiddenChar() )
        const bool bShowInDocView = rInf.GetVsh() && rInf.GetVsh()->GetWin() && rInf.GetOpt().IsShowHiddenChar();
        const bool bShowForPrinting = rInf.GetOpt().IsShowHiddenChar( true ) && rInf.GetOpt().IsPrinting();
        if (bShowInDocView || bShowForPrinting)
            return false;

        const SwScriptInfo& rSI = rInf.GetParaPortion()->GetScriptInfo();
        TextFrameIndex nHiddenStart;
        TextFrameIndex nHiddenEnd;
        rSI.GetBoundsOfHiddenRange( rPos, nHiddenStart, nHiddenEnd );
        if ( nHiddenEnd )
        {
            rPos = nHiddenEnd;
            return true;
        }

        return false;
    }

    bool lcl_HasSameBorder(const SwFont& rFirst, const SwFont& rSecond)
    {
        return
            rFirst.GetTopBorder() == rSecond.GetTopBorder() &&
            rFirst.GetBottomBorder() == rSecond.GetBottomBorder() &&
            rFirst.GetLeftBorder() == rSecond.GetLeftBorder() &&
            rFirst.GetRightBorder() == rSecond.GetRightBorder() &&
            rFirst.GetTopBorderDist() == rSecond.GetTopBorderDist() &&
            rFirst.GetBottomBorderDist() == rSecond.GetBottomBorderDist() &&
            rFirst.GetLeftBorderDist() == rSecond.GetLeftBorderDist() &&
            rFirst.GetRightBorderDist() == rSecond.GetRightBorderDist() &&
            rFirst.GetOrientation() == rSecond.GetOrientation() &&
            rFirst.GetShadowColor() == rSecond.GetShadowColor() &&
            rFirst.GetShadowWidth() == rSecond.GetShadowWidth() &&
            rFirst.GetShadowLocation() == rSecond.GetShadowLocation();
    }

} //end unnamed namespace

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */