/************************************************************************* * * $RCSfile: trvlfrm.cxx,v $ * * $Revision: 1.5 $ * * last change: $Author: ama $ $Date: 2000-12-12 10:49:12 $ * * The Contents of this file are made available subject to the terms of * either of the following licenses * * - GNU Lesser General Public License Version 2.1 * - Sun Industry Standards Source License Version 1.1 * * Sun Microsystems Inc., October, 2000 * * GNU Lesser General Public License Version 2.1 * ============================================= * Copyright 2000 by Sun Microsystems, Inc. * 901 San Antonio Road, Palo Alto, CA 94303, USA * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software Foundation. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * * Sun Industry Standards Source License Version 1.1 * ================================================= * The contents of this file are subject to the Sun Industry Standards * Source License Version 1.1 (the "License"); You may not use this file * except in compliance with the License. You may obtain a copy of the * License at http://www.openoffice.org/license.html. * * Software provided under this License is provided on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. * See the License for the specific provisions governing your rights and * obligations concerning the Software. * * The Initial Developer of the Original Code is: Sun Microsystems, Inc. * * Copyright: 2000 by Sun Microsystems, Inc. * * All Rights Reserved. * * Contributor(s): _______________________________________ * * ************************************************************************/ #ifdef PRECOMPILED #include "core_pch.hxx" #endif #pragma hdrstop #ifndef _HINTIDS_HXX #include #endif #ifndef _BIGINT_HXX //autogen #include #endif #ifndef _SVX_PROTITEM_HXX //autogen #include #endif #ifndef _SV_SETTINGS_HXX //autogen #include #endif #ifndef _SV_OUTDEV_HXX //autogen #include #endif #ifndef _FMTPDSC_HXX //autogen #include #endif #ifndef _FMTSRND_HXX //autogen #include #endif #ifndef _PAGEFRM_HXX //autogen #include #endif #ifndef _ROOTFRM_HXX //autogen #include #endif #ifndef _CNTFRM_HXX //autogen #include #endif #ifndef _FTNFRM_HXX //autogen #include #endif #ifndef _FLYFRM_HXX //autogen #include #endif #ifndef _TABFRM_HXX //autogen #include #endif #ifndef _CELLFRM_HXX //autogen #include #endif #ifndef _TXTFRM_HXX //autogen #include #endif #ifndef _VIEWSH_HXX //autogen #include #endif #ifndef _DOC_HXX //autogen #include #endif #ifndef _VISCRS_HXX //autogen #include #endif #ifndef _PAM_HXX //autogen #include #endif #ifndef _NODE_HXX //autogen #include #endif #ifndef _FRMFMT_HXX //autogen #include #endif #ifndef _SWTABLE_HXX //autogen #include #endif #ifndef _DFLYOBJ_HXX //autogen #include #endif #ifndef _CRSTATE_HXX //autogen #include #endif #ifndef _FRMTOOL_HXX //autogen #include #endif #ifndef _HINTS_HXX //autogen #include #endif #ifndef _FRMSH_HXX #include #endif //Fuer SwFlyFrm::GetCrsrOfst class SwCrsrOszControl { public: // damit schon der Compiler die Klasse initialisieren kann, keinen // DTOR und member als publics: const SwFlyFrm *pEntry; const SwFlyFrm *pStk1; const SwFlyFrm *pStk2; //public: // SwCrsrOszControl() : pStk1( 0 ), pStk2( 0 ) {}; // ; <- ???? BOOL ChkOsz( const SwFlyFrm *pFly ) { BOOL bRet = TRUE; if ( pFly != pStk1 && pFly != pStk2 ) { pStk1 = pStk2; pStk2 = pFly; bRet = FALSE; } return bRet; } void Entry( const SwFlyFrm *pFly ) { if ( !pEntry ) pEntry = pStk1 = pFly; } void Exit( const SwFlyFrm *pFly ) { if ( pFly == pEntry ) pEntry = pStk1 = pStk2 = 0; } }; static SwCrsrOszControl aOszCtrl = { 0, 0, 0 }; /************************************************************************* |* |* SwLayoutFrm::GetCrsrOfst() |* |* Beschreibung: Sucht denjenigen CntntFrm, innerhalb dessen |* PrtArea der Point liegt. |* Ersterstellung MA 20. Jul. 92 |* Letzte Aenderung MA 23. May. 95 |* |*************************************************************************/ BOOL SwLayoutFrm::GetCrsrOfst( SwPosition *pPos, Point &rPoint, const SwCrsrMoveState* pCMS ) const { BOOL bRet = FALSE; const SwFrm *pFrm = Lower(); while ( !bRet && pFrm ) { pFrm->Calc(); SwRect aPaintRect( pFrm->PaintArea() ); if ( aPaintRect.IsInside( rPoint ) && pFrm->GetCrsrOfst( pPos, rPoint, pCMS ) ) bRet = TRUE; else pFrm = pFrm->GetNext(); if ( pCMS && pCMS->bStop ) return FALSE; } return bRet; } /************************************************************************* |* |* SwPageFrm::GetCrsrOfst() |* |* Beschreibung: Sucht die Seite, innerhalb der der gesuchte Point |* liegt. |* Ersterstellung MA 20. Jul. 92 |* Letzte Aenderung MA 18. Jul. 96 |* |*************************************************************************/ #pragma optimize("e",off) BOOL SwPageFrm::GetCrsrOfst( SwPosition *pPos, Point &rPoint, const SwCrsrMoveState* pCMS ) const { BOOL bRet = FALSE; const SwPageFrm *pPage = this; const PtPtr pFix = pFIXPOS; const PtPtr pVar = pVARPOS; Point aStPoint( rPoint ); Point aPoint; while ( !bRet && pPage ) { aPoint = aStPoint; //Wenn der Point in der VarRichtung zwischen zwei Seiten liegt //erhaelt die Seite die dem Point naeher steht den Zuschlag. SwTwips nTmp = bVarHeight ? pPage->Frm().Top() : pPage->Frm().Left(); if ( pPage->GetPrev() ) { const SwTwips nPreTmp = bVarHeight ? pPage->GetPrev()->Frm().Bottom() : pPage->GetPrev()->Frm().Right(); if ( (aPoint.*pVar > nPreTmp) && (aPoint.*pVar < nTmp) && ((aPoint.*pVar - nPreTmp) >= (nTmp - aPoint.*pVar)) ) aPoint.*pVar = nTmp; } else if ( aPoint.*pVar < nTmp ) aPoint.*pVar = nTmp; nTmp = bVarHeight ? pPage->Frm().Bottom() : pPage->Frm().Right(); if ( pPage->GetNext() ) { const SwTwips nNxtTmp = bVarHeight ? pPage->GetNext()->Frm().Top() : pPage->GetNext()->Frm().Left(); if ( (aPoint.*pVar > nTmp) && (aPoint.*pVar < nNxtTmp) && ((nNxtTmp - aPoint.*pVar) >= (aPoint.*pVar - nTmp)) ) aPoint.*pVar = nTmp; } else if ( aPoint.*pVar > nTmp ) aPoint.*pVar = nTmp; //Wenn der Punkt in der Fix-Richtung neben der Seite liegt wird er //hineingezogen. const SwTwips nVarA = pPage->Frm().Pos().*pFix; const SwTwips nVarB = bVarHeight ? pPage->Frm().Right() : pPage->Frm().Bottom(); if ( nVarA > aPoint.*pFix ) aPoint.*pFix = nVarA; else if ( nVarB < aPoint.*pFix ) aPoint.*pFix = nVarB; //Weitere versuche mit der aktuellen Seite nur dann, wenn sich der //Point innerhalb der Seite befindet. const BOOL bInside = pPage->Frm().IsInside( aPoint ); //Koennte ein Freifliegender gemeint sein? //Wenn sein Inhalt geschuetzt werden soll, so ist nix mit Crsr //hineinsetzen, dadurch sollten alle Aenderungen unmoeglich sein. if ( bInside && pPage->GetSortedObjs() ) { SwOrderIter aIter( pPage ); aIter.Top(); while ( aIter() ) { SwVirtFlyDrawObj *pObj = (SwVirtFlyDrawObj*)aIter(); SwFlyFrm *pFly = pObj ? pObj->GetFlyFrm() : 0; if ( pFly && ((pCMS?pCMS->bSetInReadOnly:FALSE) || !pFly->IsProtected()) && pFly->GetCrsrOfst( pPos, aPoint, pCMS ) ) { bRet = TRUE; break; } if ( pCMS && pCMS->bStop ) return FALSE; aIter.Prev(); } } if ( !bRet && bInside ) { //Wenn kein Cntnt unterhalb der Seite 'antwortet', so korrigieren //wir den StartPoint und fangen nochmal eine Seite vor der //aktuellen an. Mit Flys ist es dann allerdings vorbei. if ( pPage->SwLayoutFrm::GetCrsrOfst( pPos, aPoint, pCMS ) ) bRet = TRUE; else { if ( pCMS && (pCMS->bStop || pCMS->bExactOnly) ) { ((SwCrsrMoveState*)pCMS)->bStop = TRUE; return FALSE; } const SwCntntFrm *pCnt = pPage->GetCntntPos( aPoint, FALSE, FALSE, FALSE, pCMS, FALSE ); if ( pCMS && pCMS->bStop ) return FALSE; ASSERT( pCnt, "Crsr is gone to a Black hole" ); if( pCMS && pCMS->pFill && pCnt->IsTxtFrm() ) pCnt->GetCrsrOfst( pPos, rPoint, pCMS ); else pCnt->GetCrsrOfst( pPos, aPoint, pCMS ); bRet = TRUE; } } pPage = (const SwPageFrm*)pPage->GetNext(); } if ( bRet ) rPoint = aPoint; return bRet; } #pragma optimize("",on) /************************************************************************* |* |* SwRootFrm::GetCrsrOfst() |* |* Beschreibung: Reicht Primaer den Aufruf an die erste Seite weiter. |* Wenn der 'reingereichte Point veraendert wird, |* so wird FALSE zurueckgegeben. |* Ersterstellung MA 01. Jun. 92 |* Letzte Aenderung MA 30. Nov. 94 |* |*************************************************************************/ BOOL SwRootFrm::GetCrsrOfst( SwPosition *pPos, Point &rPoint, const SwCrsrMoveState* pCMS ) const { ASSERT( (Lower() && Lower()->IsPageFrm()), "Keinen PageFrm gefunden." ); if( pCMS && pCMS->pFill ) ((SwCrsrMoveState*)pCMS)->bFillRet = FALSE; Point aOldPoint = rPoint; const SwPageFrm *pPage = (SwPageFrm*)Lower(); pPage->SwPageFrm::GetCrsrOfst( pPos, rPoint, pCMS ); if( pCMS ) { if( pCMS->bStop ) return FALSE; if( pCMS->pFill ) return pCMS->bFillRet; } return aOldPoint == rPoint; } /************************************************************************* |* |* SwCellFrm::GetCrsrOfst() |* |* Beschreibung Wenn es sich um eine Cntnt-tragende Cell handelt wird |* der Crsr notfalls mit Gewalt in einen der CntntFrms |* gesetzt. |* In geschuetzte Zellen gibt es hier keinen Eingang. |* Ersterstellung MA 04. Jun. 93 |* Letzte Aenderung MA 23. May. 95 |* |*************************************************************************/ BOOL SwCellFrm::GetCrsrOfst( SwPosition *pPos, Point &rPoint, const SwCrsrMoveState* pCMS ) const { ASSERT( Lower(), "Zelle ohne Inhalt." ); if ( !(pCMS?pCMS->bSetInReadOnly:FALSE) && GetFmt()->GetProtect().IsCntntProtected() ) return FALSE; if ( pCMS && pCMS->eState == MV_TBLSEL ) { const SwTabFrm *pTab = FindTabFrm(); if ( pTab->IsFollow() && pTab->GetTable()->IsHeadlineRepeat() && ((SwLayoutFrm*)pTab->Lower())->IsAnLower( this ) ) { ((SwCrsrMoveState*)pCMS)->bStop = TRUE; return FALSE; } } if ( Lower()->IsLayoutFrm() ) return SwLayoutFrm::GetCrsrOfst( pPos, rPoint, pCMS ); else { Calc(); BOOL bRet = FALSE; const SwFrm *pFrm = Lower(); while ( pFrm && !bRet ) { pFrm->Calc(); if ( pFrm->Frm().IsInside( rPoint ) ) { bRet = pFrm->GetCrsrOfst( pPos, rPoint, pCMS ); if ( pCMS && pCMS->bStop ) return FALSE; } pFrm = pFrm->GetNext(); } if ( !bRet ) { Point *pPoint = pCMS && pCMS->pFill ? new Point( rPoint ) : NULL; const SwCntntFrm *pCnt = GetCntntPos( rPoint, TRUE ); if( pPoint && pCnt->IsTxtFrm() ) { pCnt->GetCrsrOfst( pPos, *pPoint, pCMS ); rPoint = *pPoint; } else pCnt->GetCrsrOfst( pPos, rPoint, pCMS ); delete pPoint; } return TRUE; } } /************************************************************************* |* |* SwFlyFrm::GetCrsrOfst() |* |* Ersterstellung MA 15. Dec. 92 |* Letzte Aenderung MA 23. May. 95 |* |*************************************************************************/ //Problem: Wenn zwei Flys genau gleich gross sind und auf derselben //Position stehen, so liegt jeder innerhalb des anderen. //Da jeweils geprueft wird, ob der Point nicht zufaellig innerhalb eines //anderen Flys liegt, der sich vollstaendig innerhalb des aktuellen befindet //und ggf. ein rekursiver Aufruf erfolgt wuerde o.g. Situation zu einer //endlosen Rekursion fuehren. //Mit der Hilfsklasse SwCrsrOszControl unterbinden wir die Rekursion. Das //GetCrsrOfst entscheidet sich bei einer Rekursion fuer denjenigen der //am weitesten oben liegt. BOOL SwFlyFrm::GetCrsrOfst( SwPosition *pPos, Point &rPoint, const SwCrsrMoveState* pCMS ) const { aOszCtrl.Entry( this ); //Wenn der Point innerhalb des Fly sitzt wollen wir energisch //versuchen den Crsr hineinzusetzen. //Wenn der Point allerdings in einem Flys sitzt, der sich vollstaendig //innerhalb des aktuellen befindet, so wird fuer diesen das //GetCrsrOfst gerufen. Calc(); BOOL bInside = Frm().IsInside( rPoint ) && Lower(), bRet = FALSE; //Wenn der Frm eine Grafik enthaelt, aber nur Text gewuenscht ist, so //nimmt er den Crsr grundsaetzlich nicht an. if ( bInside && pCMS && pCMS->eState == MV_SETONLYTEXT && (!Lower() || Lower()->IsNoTxtFrm()) ) bInside = FALSE; const SwPageFrm *pPage = FindPageFrm(); if ( bInside && pPage && pPage->GetSortedObjs() ) { SwOrderIter aIter( pPage ); aIter.Top(); while ( aIter() && !bRet ) { SwVirtFlyDrawObj *pObj = (SwVirtFlyDrawObj*)aIter(); SwFlyFrm *pFly = pObj ? pObj->GetFlyFrm() : 0; if ( pFly && pFly->Frm().IsInside( rPoint ) && Frm().IsInside( pFly->Frm() ) ) { if ( aOszCtrl.ChkOsz( pFly ) || TRUE == (bRet = pFly->GetCrsrOfst( pPos, rPoint, pCMS ))) break; if ( pCMS && pCMS->bStop ) return FALSE; } aIter.Next(); } } while ( bInside && !bRet ) { const SwFrm *pFrm = Lower(); while ( pFrm && !bRet ) { pFrm->Calc(); if ( pFrm->Frm().IsInside( rPoint ) ) { bRet = pFrm->GetCrsrOfst( pPos, rPoint, pCMS ); if ( pCMS && pCMS->bStop ) return FALSE; } pFrm = pFrm->GetNext(); } if ( !bRet ) { Point *pPoint = pCMS && pCMS->pFill ? new Point( rPoint ) : NULL; const SwCntntFrm *pCnt = GetCntntPos( rPoint, TRUE, FALSE, FALSE, pCMS ); if ( pCMS && pCMS->bStop ) return FALSE; if( pPoint && pCnt->IsTxtFrm() ) { pCnt->GetCrsrOfst( pPos, *pPoint, pCMS ); rPoint = *pPoint; } else pCnt->GetCrsrOfst( pPos, rPoint, pCMS ); delete pPoint; bRet = TRUE; } } aOszCtrl.Exit( this ); return bRet; } /************************************************************************* |* |* Beschreibung Layoutabhaengiges Cursortravelling |* Ersterstellung MA 23. Jul. 92 |* Letzte Aenderung MA 06. Sep. 93 |* |*************************************************************************/ BOOL SwCntntFrm::LeftMargin(SwPaM *pPam) const { if( pPam->GetNode() != (SwCntntNode*)GetNode() ) return FALSE; ((SwCntntNode*)GetNode())-> MakeStartIndex((SwIndex *) &pPam->GetPoint()->nContent); return TRUE; } BOOL SwCntntFrm::RightMargin(SwPaM *pPam, BOOL) const { if( pPam->GetNode() != (SwCntntNode*)GetNode() ) return FALSE; ((SwCntntNode*)GetNode())-> MakeEndIndex((SwIndex *) &pPam->GetPoint()->nContent); return TRUE; } const SwCntntFrm *lcl_GetNxtCnt( const SwCntntFrm* pCnt ) { return pCnt->GetNextCntntFrm(); } const SwCntntFrm *lcl_GetPrvCnt( const SwCntntFrm* pCnt ) { return pCnt->GetPrevCntntFrm(); } typedef const SwCntntFrm *(*GetNxtPrvCnt)( const SwCntntFrm* ); //Frame in wiederholter Headline? FASTBOOL lcl_IsInRepeatedHeadline( const SwFrm *pFrm ) { const SwTabFrm *pTab; return 0 != (pTab = pFrm->FindTabFrm()) && pTab->IsFollow() && pTab->GetTable()->IsHeadlineRepeat() && ((SwLayoutFrm*)pTab->Lower())->IsAnLower( pFrm ); } //Ueberspringen geschuetzter Tabellenzellen. Optional auch //Ueberspringen von wiederholten Headlines. //MA 26. Jan. 98: Chg auch andere Geschuetzte Bereiche ueberspringen. const SwCntntFrm * MA_FASTCALL lcl_MissProtectedFrames( const SwCntntFrm *pCnt, GetNxtPrvCnt fnNxtPrv, FASTBOOL bMissHeadline, FASTBOOL bInReadOnly ) { if ( pCnt && pCnt->IsInTab() ) { BOOL bProtect = TRUE; while ( pCnt && bProtect ) { const SwLayoutFrm *pCell = pCnt->GetUpper(); while ( pCell && !pCell->IsCellFrm() ) pCell = pCell->GetUpper(); if ( !pCell || ((bInReadOnly || !pCell->GetFmt()->GetProtect().IsCntntProtected()) && (!bMissHeadline || !lcl_IsInRepeatedHeadline( pCell ) ))) bProtect = FALSE; else pCnt = (*fnNxtPrv)( pCnt ); } } else if ( !bInReadOnly ) while ( pCnt && pCnt->IsProtected() ) pCnt = (*fnNxtPrv)( pCnt ); return pCnt; } BOOL MA_FASTCALL lcl_UpDown( SwPaM *pPam, const SwCntntFrm *pStart, GetNxtPrvCnt fnNxtPrv, BOOL bInReadOnly ) { ASSERT( pPam->GetNode() == (SwCntntNode*)pStart->GetNode(), "lcl_UpDown arbeitet nicht fuer andere." ); const SwCntntFrm *pCnt = 0; //Wenn gerade eine Tabellenselection laeuft muss ein bischen getricktst //werden: Beim hochlaufen an den Anfang der Zelle gehen, beim runterlaufen //an das Ende der Zelle gehen. if ( pStart->IsInTab() && pPam->GetNode( TRUE )->StartOfSectionNode() != pPam->GetNode( FALSE )->StartOfSectionNode() ) { const SwLayoutFrm *pCell = pStart->GetUpper(); while ( !pCell->IsCellFrm() ) pCell = pCell->GetUpper(); const SwCntntFrm *pNxt = pCnt = pStart; while ( pCell->IsAnLower( pNxt ) ) { pCnt = pNxt; pNxt = (*fnNxtPrv)( pNxt ); } } pCnt = (*fnNxtPrv)( pCnt ? pCnt : pStart ); pCnt = ::lcl_MissProtectedFrames( pCnt, fnNxtPrv, TRUE, bInReadOnly ); const SwTabFrm *pStTab = pStart->FindTabFrm(); const SwTabFrm *pTable; const BOOL bTab = pStTab || (pCnt && pCnt->IsInTab()) ? TRUE : FALSE; BOOL bEnd = bTab ? FALSE : TRUE; SwTwips nX; if ( bTab ) { SwRect aRect( pStart->Frm() ); pStart->GetCharRect( aRect, *pPam->GetPoint() ); nX = aRect.Center().X(); const SwTabFrm *pTab = pCnt ? pCnt->FindTabFrm() : 0; if ( !pTab ) pTab = pStTab; pTable = pTab; if ( pStTab ) { //Der Fluss fuehrt von einer Tabelle in die nachste. Der X-Wert //muss ausgehend von der Mitte der Startzelle um die Verschiebung //der Tabellen korrigiert werden. const SwFrm *pCell = pStart->GetUpper(); while ( pCell && !pCell->IsCellFrm() ) pCell = pCell->GetUpper(); ASSERT( pCell, "Zelle nicht gefunden." ); nX = pCell->Frm().Left() + pCell->Frm().Width() / 2; nX += pTab->Frm().Left() - pStTab->Frm().Left(); } const SwCntntFrm *pTmp = pTab->ContainsCntnt(); if ( nX < (pTmp->Frm().Left() + pTmp->Prt().Left()) ) nX = pTmp->Frm().Left() + pTmp->Prt().Left(); else { pTmp = pTab->FindLastCntnt(); if ( nX > (pTmp->Frm().Left() + pTmp->Prt().Right()) ) nX = pTmp->Frm().Left() + pTmp->Prt().Right(); } } do { //Wenn ich im DokumentBody bin, so will ich da auch bleiben if ( pStart->IsInDocBody() ) while ( pCnt && (!pCnt->IsInDocBody() || (pCnt->IsTxtFrm() && ((SwTxtFrm*)pCnt)->IsHiddenNow()))) { pCnt = (*fnNxtPrv)( pCnt ); pCnt = ::lcl_MissProtectedFrames( pCnt, fnNxtPrv, TRUE, bInReadOnly ); } //Wenn ich im Fussnotenbereich bin, so versuche ich notfalls den naechsten //Fussnotenbereich zu erreichen. else if ( pStart->IsInFtn() ) while ( pCnt && !pCnt->IsInFtn() ) { pCnt = (*fnNxtPrv)( pCnt ); pCnt = ::lcl_MissProtectedFrames( pCnt, fnNxtPrv, TRUE, bInReadOnly ); } //In Flys kann es Blind weitergehen solange ein Cntnt //gefunden wird. else if ( pStart->IsInFly() ) { if ( pCnt && pCnt->IsTxtFrm() && ((SwTxtFrm*)pCnt)->IsHiddenNow() ) { pCnt = (*fnNxtPrv)( pCnt ); pCnt = ::lcl_MissProtectedFrames( pCnt, fnNxtPrv, TRUE, bInReadOnly ); } } //Andernfalls weigere ich mich einfach den derzeitigen Bereich zu //verlassen. else if ( pCnt ) { const SwFrm *pUp = pStart->GetUpper(); //Head/Foot while ( pUp && pUp->GetUpper() && !(pUp->GetType() & 0x0018 ) ) pUp = pUp->GetUpper(); BOOL bSame = FALSE; const SwFrm *pCntUp = pCnt->GetUpper(); while ( pCntUp && !bSame ) { if ( pUp == pCntUp ) bSame = TRUE; else pCntUp = pCntUp->GetUpper(); } if ( !bSame ) pCnt = 0; } if ( bTab ) { if ( !pCnt ) bEnd = TRUE; else { const SwTabFrm *pTab = pCnt->FindTabFrm(); if( !pTab ) bEnd = TRUE; else { if ( pTab != pTable ) { //Der Fluss fuehrt von einer Tabelle in die nachste. Der //X-Wert muss um die Verschiebung der Tabellen korrigiert //werden. if ( pTable ) nX += pTab->Frm().Left() - pTable->Frm().Left(); pTable = pTab; } const SwLayoutFrm *pCell = pTab ? pCnt->GetUpper() : 0; while ( pCell && !pCell->IsCellFrm() ) pCell = pCell->GetUpper(); if ( pCell && pCell->Frm().IsInside( Point( nX, pCell->Frm().Top())) ) { bEnd = TRUE; //Jetzt noch schnell den richtigen Cntnt in der Zelle //greifen. if ( !pCnt->Frm().IsInside( Point( nX, pCnt->Frm().Top()))) { pCnt = pCell->ContainsCntnt(); if ( fnNxtPrv == lcl_GetPrvCnt ) while ( pCell->IsAnLower(pCnt->GetNextCntntFrm()) ) pCnt = pCnt->GetNextCntntFrm(); } } else if ( pCnt->Frm().IsInside( Point( nX, pCnt->Frm().Top()))) bEnd = TRUE; } } if ( !bEnd ) { pCnt = (*fnNxtPrv)( pCnt ); pCnt = ::lcl_MissProtectedFrames( pCnt, fnNxtPrv, TRUE, bInReadOnly ); } } } while ( !bEnd || (pCnt && pCnt->IsTxtFrm() && ((SwTxtFrm*)pCnt)->IsHiddenNow())); if( pCnt ) { // setze den Point auf den Content-Node SwCntntNode *pCNd = (SwCntntNode*)pCnt->GetNode(); pPam->GetPoint()->nNode = *pCNd; if ( fnNxtPrv == lcl_GetPrvCnt ) pCNd->MakeEndIndex( (SwIndex*)&pPam->GetPoint()->nContent ); else pCNd->MakeStartIndex( (SwIndex*)&pPam->GetPoint()->nContent ); return TRUE; } return FALSE; } BOOL SwCntntFrm::UnitUp( SwPaM* pPam, const SwTwips, BOOL bInReadOnly ) const { return ::lcl_UpDown( pPam, this, lcl_GetPrvCnt, bInReadOnly ); } BOOL SwCntntFrm::UnitDown( SwPaM* pPam, const SwTwips, BOOL bInReadOnly ) const { return ::lcl_UpDown( pPam, this, lcl_GetNxtCnt, bInReadOnly ); } /************************************************************************* |* |* SwRootFrm::GetCurrPage() |* |* Beschreibung: Liefert die Nummer der aktuellen Seite. |* Wenn die Methode einen PaM bekommt, so ist die aktuelle Seite |* diejenige in der der PaM sitzt. Anderfalls ist die aktuelle |* Seite die erste Seite innerhalb der VisibleArea. |* Es wird nur auf den vorhandenen Seiten gearbeitet! |* Ersterstellung MA 20. May. 92 |* Letzte Aenderung MA 09. Oct. 97 |* |*************************************************************************/ USHORT SwRootFrm::GetCurrPage( const SwPaM *pActualCrsr ) const { ASSERT( pActualCrsr, "Welche Seite soll's denn sein?" ); const SwFrm *pActFrm = GetFmt()->GetDoc()->GetNodes()[pActualCrsr->GetPoint()->nNode]-> GetCntntNode()->GetFrm( 0, pActualCrsr->GetPoint(), FALSE ); return pActFrm->FindPageFrm()->GetPhyPageNum(); } /************************************************************************* |* |* SwRootFrm::SetCurrPage() |* |* Beschreibung: Liefert einen PaM der am Anfang der gewuenschten |* Seite sitzt. |* Formatiert wird soweit notwendig |* Liefert Null, wenn die Operation nicht moeglich ist. |* Der PaM sitzt in der letzten Seite, wenn die Seitenzahl zu gross |* gewaehlt wurde. |* Ersterstellung MA 20. May. 92 |* Letzte Aenderung MA 09. Oct. 97 |* |*************************************************************************/ USHORT SwRootFrm::SetCurrPage( SwCursor* pToSet, USHORT nPageNum ) { ASSERT( Lower() && Lower()->IsPageFrm(), "Keine Seite vorhanden." ); SwPageFrm *pPage = (SwPageFrm*)Lower(); BOOL bEnd =FALSE; while ( !bEnd && pPage->GetPhyPageNum() != nPageNum ) { if ( pPage->GetNext() ) pPage = (SwPageFrm*)pPage->GetNext(); else { //Ersten CntntFrm Suchen, und solange Formatieren bis //eine neue Seite angefangen wird oder bis die CntntFrm's alle //sind. const SwCntntFrm *pCntnt = pPage->ContainsCntnt(); while ( pCntnt && pPage->IsAnLower( pCntnt ) ) { pCntnt->Calc(); pCntnt = pCntnt->GetNextCntntFrm(); } //Jetzt ist entweder eine neue Seite da, oder die letzte Seite //ist gefunden. if ( pPage->GetNext() ) pPage = (SwPageFrm*)pPage->GetNext(); else bEnd = TRUE; } } //pPage zeigt jetzt auf die 'gewuenschte' Seite. Jetzt muss noch der //PaM auf den Anfang des ersten CntntFrm im Body-Text erzeugt werden. //Wenn es sich um eine Fussnotenseite handelt, wird der PaM in die erste //Fussnote gesetzt. const SwCntntFrm *pCntnt = pPage->ContainsCntnt(); if ( pPage->IsFtnPage() ) while ( pCntnt && !pCntnt->IsInFtn() ) pCntnt = pCntnt->GetNextCntntFrm(); else while ( pCntnt && !pCntnt->IsInDocBody() ) pCntnt = pCntnt->GetNextCntntFrm(); if ( pCntnt ) { SwCntntNode* pCNd = (SwCntntNode*)pCntnt->GetNode(); pToSet->GetPoint()->nNode = *pCNd; pCNd->MakeStartIndex( (SwIndex*)&pToSet->GetPoint()->nContent ); pToSet->GetPoint()->nContent = ((SwTxtFrm*)pCntnt)->GetOfst(); SwShellCrsr* pSCrsr = (SwShellCrsr*)*pToSet; if( pSCrsr ) { Point &rPt = pSCrsr->GetPtPos(); rPt = pCntnt->Frm().Pos(); rPt += pCntnt->Prt().Pos(); } return pPage->GetPhyPageNum(); } return 0; } /************************************************************************* |* |* SwCntntFrm::StartxxPage(), EndxxPage() |* |* Beschreibung Cursor an Anfang/Ende der aktuellen/vorherigen/ |* naechsten Seite. Alle sechs Methoden rufen GetFrmInPage() mit der |* entsprechenden Parametrisierung. |* Zwei Parameter steuern die Richtung: einer bestimmt die Seite, der |* andere Anfang/Ende. |* Fuer die Bestimmung der Seite und des Cntnt (Anfang/Ende) werden |* die im folgenden definierten Funktionen benutzt. |* Ersterstellung MA 15. Oct. 92 |* Letzte Aenderung MA 28. Feb. 93 |* |*************************************************************************/ SwCntntFrm *GetFirstSub( const SwLayoutFrm *pLayout ) { return ((SwPageFrm*)pLayout)->FindFirstBodyCntnt(); } SwCntntFrm *GetLastSub( const SwLayoutFrm *pLayout ) { return ((SwPageFrm*)pLayout)->FindLastBodyCntnt(); } SwLayoutFrm *GetNextFrm( const SwLayoutFrm *pFrm ) { return (pFrm->GetNext() && pFrm->GetNext()->IsLayoutFrm()) ? (SwLayoutFrm*)pFrm->GetNext() : 0; } SwLayoutFrm *GetThisFrm( const SwLayoutFrm *pFrm ) { return (SwLayoutFrm*)pFrm; } SwLayoutFrm *GetPrevFrm( const SwLayoutFrm *pFrm ) { return (pFrm->GetPrev() && pFrm->GetPrev()->IsLayoutFrm()) ? (SwLayoutFrm*)pFrm->GetPrev() : 0; } //Jetzt koennen auch die Funktionspointer initalisiert werden; //sie sind in cshtyp.hxx declariert. SwPosPage fnPageStart = GetFirstSub; SwPosPage fnPageEnd = GetLastSub; SwWhichPage fnPagePrev = GetPrevFrm; SwWhichPage fnPageCurr = GetThisFrm; SwWhichPage fnPageNext = GetNextFrm; //Liefert den ersten/den letzten Contentframe (gesteuert ueber //den Parameter fnPosPage) in der //aktuellen/vorhergehenden/folgenden Seite (gesteuert durch den //Parameter fnWhichPage). BOOL GetFrmInPage( const SwCntntFrm *pCnt, SwWhichPage fnWhichPage, SwPosPage fnPosPage, SwPaM *pPam ) { //Erstmal die gewuenschte Seite besorgen, anfangs die aktuelle, dann //die die per fnWichPage gewuenscht wurde const SwLayoutFrm *pLayoutFrm = pCnt->FindPageFrm(); if ( !pLayoutFrm || (0 == (pLayoutFrm = (*fnWhichPage)(pLayoutFrm))) ) return FALSE; //Jetzt den gewuenschen CntntFrm unterhalb der Seite if( 0 == (pCnt = (*fnPosPage)(pLayoutFrm)) ) return FALSE; else { SwCntntNode *pCNd = (SwCntntNode*)pCnt->GetNode(); pPam->GetPoint()->nNode = *pCNd; xub_StrLen nIdx; if( fnPosPage == GetFirstSub ) nIdx = ((SwTxtFrm*)pCnt)->GetOfst(); else nIdx = pCnt->GetFollow() ? ((SwTxtFrm*)pCnt)->GetFollow()->GetOfst()-1 : pCNd->Len(); pPam->GetPoint()->nContent.Assign( pCNd, nIdx ); return TRUE; } } /************************************************************************* |* |* SwLayoutFrm::GetCntntPos() |* |* Beschreibung Es wird der nachstliegende Cntnt zum uebergebenen |* gesucht. Betrachtet werden die vorhergehende, die |* aktuelle und die folgende Seite. |* Wenn kein Inhalt gefunden wird, so wird der Bereich * erweitert bis einer gefunden wird. |* Zurueckgegeben wird die 'Semantisch richtige' Position |* innerhalb der PrtArea des gefundenen CntntFrm |* Ersterstellung MA 15. Jul. 92 |* Letzte Aenderung MA 09. Jan. 97 |* |*************************************************************************/ ULONG CalcDiff( const Point &rPt1, const Point &rPt2 ) { //Jetzt die Entfernung zwischen den beiden Punkten berechnen. //'Delta' X^2 + 'Delta'Y^2 = 'Entfernung'^2 ULONG dX = Max( rPt1.X(), rPt2.X() ) - Min( rPt1.X(), rPt2.X() ), dY = Max( rPt1.Y(), rPt2.Y() ) - Min( rPt1.Y(), rPt2.Y() ); BigInt dX1( dX ), dY1( dY ); dX1 *= dX1; dY1 *= dY1; return ::SqRt( dX1 + dY1 ); } // lcl_Inside ueberprueft, ob der Punkt innerhalb des Seitenteils liegt, in dem // auch der CntntFrame liegt. Als Seitenteile gelten in diesem Zusammenhang // Kopfzeile, Seitenbody, Fusszeile und FussnotenContainer. // Dies dient dazu, dass ein CntntFrm, der im "richtigen" Seitenteil liegt, // eher akzeptiert wird als ein anderer, der nicht dort liegt, auch wenn // dessen Abstand zum Punkt geringer ist. const SwLayoutFrm* lcl_Inside( const SwCntntFrm *pCnt, Point& rPt ) { const SwLayoutFrm* pUp = pCnt->GetUpper(); while( pUp ) { if( pUp->IsPageBodyFrm() || pUp->IsFooterFrm() || pUp->IsHeaderFrm() ) { if( rPt.Y() >= pUp->Frm().Top() && rPt.Y() <= pUp->Frm().Bottom() ) return pUp; return NULL; } if( pUp->IsFtnContFrm() ) return pUp->Frm().IsInside( rPt ) ? pUp : NULL; pUp = pUp->GetUpper(); } return NULL; } //Fuer MSC keine Optimierung mit e (enable register...) hier, sonst gibts //einen Bug (ID: 2857) #pragma optimize("e",off) const SwCntntFrm *SwLayoutFrm::GetCntntPos( Point& rPoint, const BOOL bDontLeave, const BOOL bBodyOnly, const BOOL bCalc, const SwCrsrMoveState *pCMS, const BOOL bDefaultExpand ) const { //Ersten CntntFrm ermitteln. const SwLayoutFrm *pStart = (!bDontLeave && bDefaultExpand && GetPrev()) ? (SwLayoutFrm*)GetPrev() : this; const SwCntntFrm *pCntnt = pStart->ContainsCntnt(); if ( !pCntnt && (GetPrev() && !bDontLeave) ) pCntnt = ContainsCntnt(); if ( bBodyOnly && pCntnt && !pCntnt->IsInDocBody() ) while ( pCntnt && !pCntnt->IsInDocBody() ) pCntnt = pCntnt->GetNextCntntFrm(); const SwCntntFrm *pActual= pCntnt; const SwLayoutFrm *pInside = NULL; USHORT nMaxPage = GetPhyPageNum() + (bDefaultExpand ? 1 : 0); Point aPoint = rPoint; ULONG nDistance = ULONG_MAX; while ( TRUE ) //Sicherheitsschleifchen, damit immer einer gefunden wird. { while ( pCntnt && ((!bDontLeave || IsAnLower( pCntnt )) && (pCntnt->GetPhyPageNum() <= nMaxPage)) ) { if ( ( bCalc || pCntnt->Frm().Width() ) && ( !bBodyOnly || pCntnt->IsInDocBody() ) ) { //Wenn der Cntnt in einem geschuetzen Bereich (Zelle, Ftn, Section) //liegt, wird der nachste Cntnt der nicht geschuetzt ist gesucht. const SwCntntFrm *pComp = pCntnt; pCntnt = ::lcl_MissProtectedFrames( pCntnt, lcl_GetNxtCnt, FALSE, pCMS ? pCMS->bSetInReadOnly : FALSE ); if ( pComp != pCntnt ) continue; if ( !pCntnt->IsTxtFrm() || !((SwTxtFrm*)pCntnt)->IsHiddenNow() ) { if ( bCalc ) pCntnt->Calc(); SwRect aCntFrm( pCntnt->UnionFrm() ); if ( aCntFrm.IsInside( rPoint ) ) { pActual = pCntnt; aPoint = rPoint; break; } //Die Strecke von rPoint zum dichtesten Punkt von pCntnt wird //jetzt berechnet. Point aCntntPoint( rPoint ); //Erst die Vertikale Position einstellen if ( aCntFrm.Top() > aCntntPoint.Y() ) aCntntPoint.Y() = aCntFrm.Top(); else if ( aCntFrm.Bottom() < aCntntPoint.Y() ) aCntntPoint.Y() = aCntFrm.Bottom(); //Jetzt die Horizontale Position if ( aCntFrm.Left() > aCntntPoint.X() ) aCntntPoint.X() = aCntFrm.Left(); else if ( aCntFrm.Right() < aCntntPoint.X() ) aCntntPoint.X() = aCntFrm.Right(); // pInside ist ein Seitenbereich, in dem der Punkt liegt, // sobald pInside!=0 ist, werden nur noch Frames akzeptiert, // die innerhalb liegen. if( !pInside || ( pInside->IsAnLower( pCntnt ) && ( !pCntnt->IsInFtn() || pInside->IsFtnContFrm() ) ) ) { const ULONG nDiff = ::CalcDiff( aCntntPoint, rPoint ); BOOL bBetter = nDiff < nDistance; // Dichter dran if( !pInside ) { pInside = lcl_Inside( pCntnt, rPoint ); if( pInside ) // Im "richtigen" Seitenteil bBetter = TRUE; } if( bBetter ) { aPoint = aCntntPoint; nDistance = nDiff; pActual = pCntnt; } } } } pCntnt = pCntnt->GetNextCntntFrm(); if ( bBodyOnly ) while ( pCntnt && !pCntnt->IsInDocBody() ) pCntnt = pCntnt->GetNextCntntFrm(); } if ( !pActual ) { //Wenn noch keiner gefunden wurde muss der Suchbereich erweitert //werden, irgenwann muessen wir einen Finden! //MA 09. Jan. 97: Opt fuer viele leere Seiten, wenn wir nur im //Body suchen, koennen wir den Suchbereich gleich in einem //Schritt hinreichend erweitern. if ( bBodyOnly ) { while ( !pCntnt && pStart->GetPrev() ) { ++nMaxPage; if( !pStart->GetPrev()->IsLayoutFrm() ) return 0; pStart = (SwLayoutFrm*)pStart->GetPrev(); pCntnt = pStart->IsInDocBody() ? pStart->ContainsCntnt() : pStart->FindPageFrm()->FindFirstBodyCntnt(); } if ( !pCntnt ) //irgendwann muessen wir mit irgendeinem Anfangen! { pCntnt = pStart->FindPageFrm()->GetUpper()->ContainsCntnt(); while ( pCntnt && !pCntnt->IsInDocBody() ) pCntnt = pCntnt->GetNextCntntFrm(); if ( !pCntnt ) return 0; //Es gibt noch keine Dokumentinhalt! } } else { ++nMaxPage; if ( pStart->GetPrev() ) { if( !pStart->GetPrev()->IsLayoutFrm() ) return 0; pStart = (SwLayoutFrm*)pStart->GetPrev(); pCntnt = pStart->ContainsCntnt(); } else //irgendwann muessen wir mit irgendeinem Anfangen! pCntnt = pStart->FindPageFrm()->GetUpper()->ContainsCntnt(); } pActual = pCntnt; } else break; } #ifndef PRODUCT ASSERT( pActual, "Keinen Cntnt gefunden." ); if ( bBodyOnly ) ASSERT( pActual->IsInDocBody(), "Cnt nicht im Body." ); #endif //Spezialfall fuer das selektieren von Tabellen, nicht in wiederholte //TblHedlines. if ( pActual->IsInTab() && pCMS && pCMS->eState == MV_TBLSEL ) { const SwTabFrm *pTab = pActual->FindTabFrm(); if ( pTab->IsFollow() && pTab->GetTable()->IsHeadlineRepeat() && ((SwLayoutFrm*)pTab->Lower())->IsAnLower( pActual ) ) { ((SwCrsrMoveState*)pCMS)->bStop = TRUE; return 0; } } //Jetzt noch eine kleine Korrektur beim ersten/letzten Size aActualSize( pActual->Prt().SSize() ); if ( aActualSize.Height() > pActual->GetUpper()->Prt().Height() ) aActualSize.Height() = pActual->GetUpper()->Prt().Height(); if ( !pActual->GetPrev() && ((pActual->Frm().Top() + pActual->Prt().Top()) > rPoint.Y()) ) aPoint = pActual->Frm().Pos() + pActual->Prt().Pos(); else if ( !pActual->GetNext() && ((pActual->Frm().Top() + pActual->Prt().Bottom()) < rPoint.Y()) ) { aPoint.Y() = pActual->Frm().Top() + pActual->Prt().Bottom(); aPoint.X() = pActual->Frm().Left() + pActual->Prt().Right(); } //Und den Point in die PrtArea bringen if ( bCalc ) pActual->Calc(); const SwRect aRect( pActual->Frm().Pos() + pActual->Prt().Pos(), aActualSize ); if ( aPoint.Y() < aRect.Top() ) aPoint.Y() = aRect.Top(); else if ( aPoint.Y() > aRect.Bottom() ) aPoint.Y() = aRect.Bottom(); if ( aPoint.X() < aRect.Left() ) aPoint.X() = aRect.Left(); else if ( aPoint.X() > aRect.Right() ) aPoint.X() = aRect.Right(); rPoint = aPoint; return pActual; } #pragma optimize("",on) /************************************************************************* |* |* SwPageFrm::GetCntntPosition() |* |* Beschreibung Analog zu SwLayoutFrm::GetCntntPos(). |* Spezialisiert fuer Felder in Rahmen. |* |* Ersterstellung MA 22. Mar. 95 |* Letzte Aenderung MA 07. Nov. 95 |* |*************************************************************************/ void SwPageFrm::GetCntntPosition( const Point &rPt, SwPosition &rPos ) const { //Ersten CntntFrm ermitteln. const SwCntntFrm *pCntnt = ContainsCntnt(); if ( pCntnt ) { //Einen weiter zurueck schauen (falls moeglich). const SwCntntFrm *pTmp = pCntnt->GetPrevCntntFrm(); while ( pTmp && !pTmp->IsInDocBody() ) pTmp = pTmp->GetPrevCntntFrm(); if ( pTmp ) pCntnt = pTmp; } else pCntnt = GetUpper()->ContainsCntnt(); const SwCntntFrm *pAct = pCntnt; Point aAct = rPt; ULONG nDist = ULONG_MAX; while ( pCntnt ) { SwRect aCntFrm( pCntnt->UnionFrm() ); if ( aCntFrm.IsInside( rPt ) ) { //dichter gehts nimmer. pAct = pCntnt; break; } //Die Strecke von rPt zum dichtesten Punkt von pCntnt berechnen. Point aPoint( rPt ); //Erst die vertikale Position einstellen if ( aCntFrm.Top() > rPt.Y() ) aPoint.Y() = aCntFrm.Top(); else if ( aCntFrm.Bottom() < rPt.Y() ) aPoint.Y() = aCntFrm.Bottom(); //Jetzt die horizontale Position if ( aCntFrm.Left() > rPt.X() ) aPoint.X() = aCntFrm.Left(); else if ( aCntFrm.Right() < rPt.X() ) aPoint.X() = aCntFrm.Right(); const ULONG nDiff = ::CalcDiff( aPoint, rPt ); if ( nDiff < nDist ) { aAct = aPoint; nDist = nDiff; pAct = pCntnt; } else if ( aCntFrm.Top() > Frm().Bottom() ) //Dichter wirds im Sinne der Felder nicht mehr! break; pCntnt = pCntnt->GetNextCntntFrm(); while ( pCntnt && !pCntnt->IsInDocBody() ) pCntnt = pCntnt->GetNextCntntFrm(); } //Und den Point in die PrtArea bringen const SwRect aRect( pAct->Frm().Pos() + pAct->Prt().Pos(), pAct->Prt().SSize() ); if ( aAct.Y() < aRect.Top() ) aAct.Y() = aRect.Top(); else if ( aAct.Y() > aRect.Bottom() ) aAct.Y() = aRect.Bottom(); if ( aAct.X() < aRect.Left() ) aAct.X() = aRect.Left(); else if ( aAct.X() > aRect.Right() ) aAct.X() = aRect.Right(); if( !pAct->IsValid() ) { // CntntFrm nicht formatiert -> immer auf Node-Anfang SwCntntNode* pCNd = (SwCntntNode*)pAct->GetNode(); ASSERT( pCNd, "Wo ist mein CntntNode?" ); rPos.nNode = *pCNd; rPos.nContent.Assign( pCNd, 0 ); } else { SwCrsrMoveState aTmpState( MV_SETONLYTEXT ); pAct->GetCrsrOfst( &rPos, aAct, &aTmpState ); } } /************************************************************************* |* |* SwRootFrm::GetNextCntntPos() |* |* Beschreibung Es wird der naechstliegende Cntnt zum uebergebenen |* Point gesucht. Es wird nur im BodyText gesucht. |* Ersterstellung MA 15. Jul. 92 |* Letzte Aenderung MA 20. Dec. 93 |* |*************************************************************************/ //!!!!! Es wird nur der vertikal naechstliegende gesucht. Point SwRootFrm::GetNextCntntPos( const Point& rPoint, BOOL bIgnoreTblHdln ) const { //Ersten CntntFrm und seinen Nachfolger im Body-Bereich suchen //Damit wir uns nicht tot suchen (und vor allem nicht zuviel formatieren) //gehen wir schon mal von der richtigen Seite aus. SwLayoutFrm *pPage = (SwLayoutFrm*)Lower(); while ( pPage && pPage->Frm().Bottom() < rPoint.Y() ) pPage = (SwLayoutFrm*)pPage->GetNext(); const SwCntntFrm *pCnt = pPage ? pPage->ContainsCntnt() : ContainsCntnt(); while ( pCnt && !pCnt->IsInDocBody() ) pCnt = pCnt->GetNextCntntFrm(); if ( !pCnt ) return Point( 0, 0 ); //Liegt der Point ueber dem ersten CntntFrm? pCnt->Calc(); if ( rPoint.Y() < pCnt->Frm().Top() && !lcl_IsInRepeatedHeadline( pCnt ) ) return pCnt->Frm().Pos(); while ( pCnt ) { //Liegt der Point mitten im aktuellen CntntFrm? SwRect aCntFrm( pCnt->UnionFrm() ); if ( aCntFrm.IsInside( rPoint ) && !lcl_IsInRepeatedHeadline( pCnt ) ) return rPoint; const SwCntntFrm *pNxt = pCnt->GetNextCntntFrm(); while ( pNxt && !pNxt->IsInDocBody() ) pNxt = pNxt->GetNextCntntFrm(); //Liegt der Point hinter dem letzten CntntFrm? if ( !pNxt ) return Point( aCntFrm.Right(), aCntFrm.Bottom() ); //Wenn der naechste CntntFrm hinter dem Point liegt ist er der //gesuchte. pNxt->Calc(); if ( pNxt->Frm().Top() > rPoint.Y() && !lcl_IsInRepeatedHeadline( pCnt ) ) return pNxt->Frm().Pos(); pCnt = pNxt; } return Point( 0, 0 ); } /************************************************************************* |* |* SwRootFrm::GetPrevCntntPos() |* |* Beschreibung Es wird der vorhergehende Cntnt zum uebergebenen |* Point gesucht. Es wird nur im BodyTextGesucht |* Ersterstellung MA 13. Jul. 92 |* Letzte Aenderung MA 19. Apr. 94 |* |*************************************************************************/ //!!!!! Es wird nur der vertikal naechstliegende gesucht. Point SwRootFrm::GetPrevCntntPos( const Point& rPoint ) const { //Ersten CntntFrm und seinen Nachfolger im Body-Bereich suchen //Damit wir uns nicht tot suchen (und vor allem nicht zuviel formatieren) //gehen wir schon mal von der richtigen Seite aus. SwLayoutFrm *pPage = (SwLayoutFrm*)Lower(); while ( pPage && pPage->Frm().Bottom() < rPoint.Y() ) pPage = (SwLayoutFrm*)pPage->GetNext(); const SwCntntFrm *pCnt = pPage ? pPage->ContainsCntnt() : ContainsCntnt(); while ( pCnt && !pCnt->IsInDocBody() ) pCnt = pCnt->GetNextCntntFrm(); if ( !pCnt ) return Point( 0, 0 ); //Solange der Point vor dem ersten CntntFrm liegt und es noch vorhergehende //Seiten gibt gehe ich jeweils eine Seite nach vorn. pCnt->Calc(); while ( rPoint.Y() < pCnt->Frm().Top() && pPage->GetPrev() ) { pPage = (SwLayoutFrm*)pPage->GetPrev(); pCnt = pPage->ContainsCntnt(); while ( !pCnt ) { pPage = (SwLayoutFrm*)pPage->GetPrev(); if ( pPage ) pCnt = pPage->ContainsCntnt(); else return ContainsCntnt()->UnionFrm().Pos(); } pCnt->Calc(); } if ( rPoint.Y() < pCnt->Frm().Top() ) return pCnt->UnionFrm().Pos(); while ( pCnt ) { //Liegt der Point im aktuellen CntntFrm? SwRect aCntFrm( pCnt->UnionFrm() ); if ( aCntFrm.IsInside( rPoint ) ) return rPoint; //Ist der aktuelle der letzte CntntFrm? || //Wenn der naechste CntntFrm hinter dem Point liegt, ist der //aktuelle der gesuchte. const SwCntntFrm *pNxt = pCnt->GetNextCntntFrm(); while ( pNxt && !pNxt->IsInDocBody() ) pNxt = pNxt->GetNextCntntFrm(); if ( pNxt ) pNxt->Calc(); if ( !pNxt || pNxt->Frm().Top() > rPoint.Y() ) return Point( aCntFrm.Right(), aCntFrm.Bottom() ); pCnt = pNxt; } return Point( 0, 0 ); } /************************************************************************* |* |* SwRootFrm::GetPagePos() |* |* Beschreibung: Liefert die absolute Dokumentpositon der gewuenschten |* Seite. |* Formatiert wird nur soweit notwendig und nur dann wenn bFormat=TRUE |* Liefert Null, wenn die Operation nicht moeglich ist. |* Die Pos ist die der letzten Seite, wenn die Seitenzahl zu gross |* gewaehlt wurde. |* Ersterstellung MA 01. Jun. 92 |* Letzte Aenderung MA 09. Oct. 97 |* |*************************************************************************/ Point SwRootFrm::GetPagePos( USHORT nPageNum ) const { ASSERT( Lower() && Lower()->IsPageFrm(), "Keine Seite vorhanden." ); const SwPageFrm *pPage = (const SwPageFrm*)Lower(); while ( TRUE ) { if ( pPage->GetPhyPageNum() >= nPageNum || !pPage->GetNext() ) break; pPage = (const SwPageFrm*)pPage->GetNext(); } return pPage->Frm().Pos(); } /************************************************************************* |* |* SwFrm::IsProtected() |* |* Beschreibung Ist der Frm bzw. die Section in der er steht |* geschuetzt? |* Auch Fly in Fly in ... und Fussnoten |* |* Ersterstellung MA 28. Jul. 93 |* Letzte Aenderung MA 06. Nov. 97 |* |*************************************************************************/ BOOL SwFrm::IsProtected() const { //Der Frm kann in Rahmen, Zellen oder Bereichen geschuetzt sein. //Geht auch FlyFrms rekursiv hoch. Geht auch von Fussnoten zum Anker. const SwFrm *pFrm = this; do { if ( pFrm->IsCntntFrm() ) { if ( ((SwCntntFrm*)pFrm)->GetNode()->IsInProtectSect() ) return TRUE; } else if ( ((SwLayoutFrm*)pFrm)->GetFmt()->GetProtect().IsCntntProtected() ) return TRUE; if ( pFrm->IsFlyFrm() ) { //Der Schutz des Inhaltes kann bei Verkettung vom Master der Kette //vorgegeben werden. if ( ((SwFlyFrm*)pFrm)->GetPrevLink() ) { SwFlyFrm *pMaster = (SwFlyFrm*)pFrm; do { pMaster = pMaster->GetPrevLink(); } while ( pMaster->GetPrevLink() ); if ( pMaster->IsProtected() ) return TRUE; } pFrm = ((SwFlyFrm*)pFrm)->GetAnchor(); } else if ( pFrm->IsFtnFrm() ) pFrm = ((SwFtnFrm*)pFrm)->GetRef(); else pFrm = pFrm->GetUpper(); } while ( pFrm ); return FALSE; } /************************************************************************* |* |* SwFrm::GetPhyPageNum() |* Beschreibung: Liefert die physikalische Seitennummer |* |* Ersterstellung OK 06.07.93 08:35 |* Letzte Aenderung MA 30. Nov. 94 |* |*************************************************************************/ USHORT SwFrm::GetPhyPageNum() const { const SwPageFrm *pPage = FindPageFrm(); return pPage ? pPage->GetPhyPageNum() : 0; } /************************************************************************* |* |* SwFrm::GetVirtPageNum() |* Beschreibung: Liefert die virtuelle Seitennummer mit Offset |* |* Ersterstellung OK 06.07.93 08:35 |* Letzte Aenderung MA 30. Nov. 94 |* |*************************************************************************/ USHORT SwFrm::GetVirtPageNum() const { const SwPageFrm *pPage = FindPageFrm(); if ( !pPage || !pPage->GetUpper() ) return 0; USHORT nPhyPage = pPage->GetPhyPageNum(); if ( !((SwRootFrm*)pPage->GetUpper())->IsVirtPageNum() ) return nPhyPage; //Den am naechsten stehenden Absatz mit virtueller Seitennummer suchen. //Da das rueckwaertsuchen insgesamt sehr viel Zeit verschlingt suchen //wir jetzt gezielt ueber die Abhaengigkeiten. //von den PageDescs bekommen wir die Attribute, von den Attributen //wiederum bekommen wir die Absaetze. const SwPageFrm *pVirtPage = 0; const SwFrm *pFrm = 0; const SfxItemPool &rPool = pPage->GetFmt()->GetDoc()->GetAttrPool(); const SfxPoolItem* pItem; USHORT nMaxItems = rPool.GetItemCount( RES_PAGEDESC ); for( USHORT n = 0; n < nMaxItems; ++n ) { if( 0 == (pItem = rPool.GetItem( RES_PAGEDESC, n ) )) continue; const SwFmtPageDesc *pDesc = (SwFmtPageDesc*)pItem; if ( pDesc->GetNumOffset() && pDesc->GetDefinedIn() ) { const SwModify *pMod = pDesc->GetDefinedIn(); SwVirtPageNumInfo aInfo( pPage ); pMod->GetInfo( aInfo ); if ( aInfo.GetPage() ) { if ( !pVirtPage || (pVirtPage && aInfo.GetPage()->GetPhyPageNum() > pVirtPage->GetPhyPageNum())) { pVirtPage = aInfo.GetPage(); pFrm = aInfo.GetFrm(); } } } } if ( pVirtPage ) return nPhyPage - pFrm->GetPhyPageNum() + pFrm->GetAttrSet()->GetPageDesc().GetNumOffset(); return nPhyPage; } /************************************************************************* |* |* SwRootFrm::MakeTblCrsrs() |* |* Ersterstellung MA 14. May. 93 |* Letzte Aenderung MA 02. Feb. 94 |* |*************************************************************************/ //Ermitteln und einstellen derjenigen Zellen die von der Selektion //eingeschlossen sind. void SwRootFrm::MakeTblCrsrs( SwTableCursor& rTblCrsr ) { //Union-Rects und Tabellen (Follows) der Selektion besorgen. ASSERT( rTblCrsr.GetCntntNode() && rTblCrsr.GetCntntNode( FALSE ), "Tabselection nicht auf Cnt." ); Point aPtPt, aMkPt; { SwShellCrsr* pShCrsr = rTblCrsr.operator SwShellCrsr*(); // Aufgrund eines CompilerBugs von Linux muss // der Zeigeroperator explizit gerufen werden if( pShCrsr ) { aPtPt = pShCrsr->GetPtPos(); aMkPt = pShCrsr->GetMkPos(); } } const SwLayoutFrm *pStart = rTblCrsr.GetCntntNode()->GetFrm( &aPtPt, 0, FALSE )->GetUpper(), *pEnd = rTblCrsr.GetCntntNode(FALSE)->GetFrm( &aMkPt, 0, FALSE )->GetUpper(); SwSelUnions aUnions; ::MakeSelUnions( aUnions, pStart, pEnd ); SwSelBoxes aNew; const FASTBOOL bReadOnlyAvailable = rTblCrsr.IsReadOnlyAvailable(); for ( USHORT i = 0; i < aUnions.Count(); ++i ) { SwSelUnion *pUnion = aUnions[i]; const SwTabFrm *pTable = pUnion->GetTable(); SwLayoutFrm *pRow = (SwLayoutFrm*)pTable->Lower(); if ( pRow && pTable->IsFollow() && pTable->GetTable()->IsHeadlineRepeat() ) pRow = (SwLayoutFrm*)pRow->GetNext(); while ( pRow ) { if ( pRow->Frm().IsOver( pUnion->GetUnion() ) ) { const SwLayoutFrm *pCell = pRow->FirstCell(); while ( pCell && pRow->IsAnLower( pCell ) ) { ASSERT( pCell->IsCellFrm(), "Frame ohne Celle" ); if( IsFrmInTblSel( pUnion->GetUnion(), pCell ) && (bReadOnlyAvailable || !pCell->GetFmt()->GetProtect().IsCntntProtected()) ) { SwTableBox* pInsBox = (SwTableBox*)((SwCellFrm*)pCell)->GetTabBox(); aNew.Insert( pInsBox ); } if ( pCell->GetNext() ) { pCell = (const SwLayoutFrm*)pCell->GetNext(); if ( pCell->Lower()->IsRowFrm() ) pCell = pCell->FirstCell(); } else { const SwLayoutFrm* pLastCell = pCell; do { pCell = pCell->GetNextLayoutLeaf(); } while ( pCell && pLastCell->IsAnLower( pCell ) ); // Fuer (spaltige) Bereiche... if( pCell && pCell->IsInTab() ) { while( !pCell->IsCellFrm() ) { pCell = pCell->GetUpper(); ASSERT( pCell, "Where's my cell?" ); } } } } } pRow = (SwLayoutFrm*)pRow->GetNext(); } } SwSelBoxes& rOld = (SwSelBoxes&)rTblCrsr.GetBoxes(); USHORT nOld = 0, nNew = 0; while ( nOld < rOld.Count() && nNew < aNew.Count() ) { const SwTableBox* pPOld = *( rOld.GetData() + nOld ); const SwTableBox* pPNew = *( aNew.GetData() + nNew ); if( pPOld == pPNew ) { // diese Box bleibt erhalten ++nOld; aNew.Remove( nNew ); } else if( pPOld->GetSttIdx() < pPNew->GetSttIdx() ) rTblCrsr.DeleteBox( nOld ); else { rTblCrsr.InsertBox( *pPNew ); ++nOld; ++nNew; } } while( nOld < rOld.Count() ) rTblCrsr.DeleteBox( nOld ); for( ; nNew < aNew.Count(); ++nNew ) rTblCrsr.InsertBox( **( aNew.GetData() + nNew ) ); } /************************************************************************* |* |* SwRootFrm::CalcFrmRects |* |* Ersterstellung MA 24. Aug. 92 |* Letzte Aenderung MA 24. Aug. 93 |* |*************************************************************************/ /* * nun koennen folgende Situationen auftreten: * 1. Start und Ende liegen in einer Bildschirm - Zeile und im * gleichen Node * -> aus Start und End ein Rectangle, dann Ok * 2. Start und Ende liegen in einem Frame (dadurch im gleichen Node!) * -> Start nach rechts, End nach links erweitern, * und bei mehr als 2 Bildschirm - Zeilen, das dazwischen * liegende berechnen * 3. Start und Ende liegen in verschiedenen Frames * -> Start nach rechts erweitern, bis Frame-Ende Rect berechnen * Ende nach links erweitern, bis Frame-Start Rect berechnen * und bei mehr als 2 Frames von allen dazwischen liegenden * Frames die PrtArea dazu. * 4. Wenn es sich um eine Tabellenselektion handelt wird fuer jeden * PaM im Ring der CellFrm besorgt, dessen PrtArea wird zu den * Rechtecken addiert. * * Grosser Umbau wg. der FlyFrm; denn diese muessen ausgespart werden. * Ausnahmen: - Der Fly in dem die Selektion stattfindet (wenn sie in einem Fly * stattfindet). * - Die Flys, die vom Text unterlaufen werden. * Arbeitsweise: Zuerst wird eine SwRegion mit der Root initialisiert. * Aus der Region werden die zu invertierenden Bereiche * ausgestantzt. Die Region wird Komprimiert und letztlich * invertiert. Damit liegen dann die zu invertierenden * Rechtecke vor. * Am Ende werden die Flys aus der Region ausgestanzt. */ inline void Sub( SwRegionRects& rRegion, const SwRect& rRect ) { if( rRect.Width() > 1 && rRect.Height() > 1 && rRect.IsOver( rRegion.GetOrigin() )) rRegion -= rRect; } void SwRootFrm::CalcFrmRects( SwShellCrsr &rCrsr, BOOL bIsTblMode ) { ViewShell *pSh = GetShell(); SwRegionRects aRegion( pSh ? pSh->VisArea() : Frm() ); const SwNodes &rNds = GetFmt()->GetDoc()->GetNodes(); //Erstmal die CntntFrms zum Start und End besorgen, die brauch ich auf //jedenfall. SwPosition *pStartPos = rCrsr.Start(), *pEndPos = rCrsr.GetPoint() == pStartPos ? rCrsr.GetMark() : rCrsr.GetPoint(); const SwCntntFrm *pStartFrm = rNds[ pStartPos->nNode ]-> GetCntntNode()->GetFrm( &rCrsr.GetSttPos(), pStartPos ); const SwCntntFrm *pEndFrm = rNds[ pEndPos->nNode ]-> GetCntntNode()->GetFrm( &rCrsr.GetEndPos(), pEndPos ); ASSERT( (pStartFrm && pEndFrm), "Keine CntntFrms gefunden." ); //Damit die FlyFrms, in denen selektierte Frames stecken, nicht //abgezogen werden SwSortDrawObjs aSortObjs; if ( pStartFrm->IsInFly() ) { const SdrObjectPtr pObj = (SdrObject*)pStartFrm->FindFlyFrm()->GetVirtDrawObj(); aSortObjs.Insert( pObj ); const SdrObjectPtr pObj2 = (SdrObject*)pEndFrm->FindFlyFrm()->GetVirtDrawObj(); aSortObjs.Insert( pObj2 ); } //Fall 4: Tabellenselection if( bIsTblMode ) { const SwFrm *pCell = pStartFrm->GetUpper(); while ( !pCell->IsCellFrm() ) pCell = pCell->GetUpper(); SwRect aTmp( pCell->Prt() ); aTmp.Pos() += pCell->Frm().Pos(); aRegion.ChangeOrigin( aTmp ); aRegion.Remove( 0, aRegion.Count() ); aRegion.Insert( aTmp, 0 ); } else { // falls eine nicht erlaubte Selection besteht, dann korrigiere das // nicht erlaubt ist Header/Footer/TableHeadline ueber 2 Seiten do { // middle check loop const SwLayoutFrm* pSttLFrm = pStartFrm->GetUpper(); const USHORT cHdFtTblHd = FRM_HEADER | FRM_FOOTER | FRM_TAB; while( pSttLFrm && ! (cHdFtTblHd & pSttLFrm->GetType() )) pSttLFrm = pSttLFrm->GetUpper(); if( !pSttLFrm ) break; const SwLayoutFrm* pEndLFrm = pEndFrm->GetUpper(); while( pEndLFrm && ! (cHdFtTblHd & pEndLFrm->GetType() )) pEndLFrm = pEndLFrm->GetUpper(); if( !pEndLFrm ) break; ASSERT( pEndLFrm->GetType() == pSttLFrm->GetType(), "Selection ueber unterschiedliche Inhalte" ); switch( pSttLFrm->GetType() ) { case FRM_HEADER: case FRM_FOOTER: // auf unterschiedlichen Seiten ?? // dann immer auf die Start-Seite if( pEndLFrm->FindPageFrm() != pSttLFrm->FindPageFrm() ) { // End- auf den Start-CntntFrame setzen if( pStartPos == rCrsr.GetPoint() ) pEndFrm = pStartFrm; else pStartFrm = pEndFrm; } break; case FRM_TAB: // auf unterschiedlichen Seiten ?? // existiert // dann teste auf Tabelle-Headline { const SwTabFrm* pTabFrm = (SwTabFrm*)pSttLFrm; if( ( pTabFrm->GetFollow() || ((SwTabFrm*)pEndLFrm)->GetFollow() ) && pTabFrm->GetTable()->IsHeadlineRepeat() && pTabFrm->GetLower() != ((SwTabFrm*)pEndLFrm)->GetLower() ) { // End- auf den Start-CntntFrame setzen if( pStartPos == rCrsr.GetPoint() ) pEndFrm = pStartFrm; else pStartFrm = pEndFrm; } } break; } } while( FALSE ); SwCrsrMoveState aTmpState( MV_NONE ); aTmpState.b2Lines = sal_True; //CntntRects zu Start- und EndFrms. SwRect aStRect, aEndRect; pStartFrm->GetCharRect( aStRect, *pStartPos, &aTmpState ); Sw2LinesPos *pSt2Pos = aTmpState.p2Lines; aTmpState.p2Lines = NULL; pEndFrm->GetCharRect ( aEndRect, *pEndPos, &aTmpState ); Sw2LinesPos *pEnd2Pos = aTmpState.p2Lines; SwRect aStFrm ( pStartFrm->UnionFrm( sal_True ) ); aStFrm.Intersection( pStartFrm->PaintArea() ); SwRect aEndFrm( pStartFrm == pEndFrm ? aStFrm : pEndFrm->UnionFrm( sal_True ) ); if( pStartFrm != pEndFrm ) aEndFrm.Intersection( pEndFrm->PaintArea() ); // If there's no doubleline portion involved or start and end are both // in the same doubleline portion, all works fine, but otherwise // we need the following... if( pSt2Pos != pEnd2Pos && ( !pSt2Pos || !pEnd2Pos || pSt2Pos->aPortion != pEnd2Pos->aPortion ) ) { // If we have a start(end) position inside a doubleline portion // the surrounded part of the doubleline portion is subtracted // from the region and the aStRect(aEndRect) is set to the // end(start) of the doubleline portion. if( pSt2Pos ) { SwRect aTmp( aStRect.Pos(), Point( pSt2Pos->aPortion.Right(), aStRect.Bottom() ) ); if( pSt2Pos->aPortion.Top() == aStRect.Top() ) aTmp.Top( pSt2Pos->aLine.Top() ); aTmp.Intersection( aStFrm ); Sub( aRegion, aTmp ); if( aStRect.Bottom() < pSt2Pos->aLine.Bottom() ) { aTmp.Top( aTmp.Bottom() ); aTmp.Bottom( pSt2Pos->aLine.Bottom() ); if( aStRect.Bottom() < pSt2Pos->aPortion.Bottom() ) aTmp.Left( pSt2Pos->aPortion.Left() ); aTmp.Intersection( aStFrm ); Sub( aRegion, aTmp ); } aStRect = SwRect( Point( pSt2Pos->aPortion.Right(), pSt2Pos->aLine.Top() ), Size( 1, pSt2Pos->aLine.Height() )); } if( pEnd2Pos ) { SwRect aTmp( Point( pEnd2Pos->aPortion.Left(), aEndRect.Top() ), Point( aEndRect.Left() + aEndRect.Width(), aEndRect.Top() + aEndRect.Height() ) ); if( pEnd2Pos->aPortion.Bottom() == aEndRect.Bottom() ) aTmp.Bottom( pEnd2Pos->aLine.Bottom() ); aTmp.Intersection( aEndFrm ); Sub( aRegion, aTmp ); if( aEndRect.Top() > pEnd2Pos->aLine.Top() ) { aTmp.Bottom( aTmp.Top() ); aTmp.Top( pEnd2Pos->aLine.Top() ); if( aEndRect.Top() > pEnd2Pos->aPortion.Top() ) aTmp.Right( pEnd2Pos->aPortion.Right() ); aTmp.Intersection( aEndFrm ); Sub( aRegion, aTmp ); } aEndRect = SwRect( Point( pEnd2Pos->aPortion.Left(), pEnd2Pos->aLine.Top()), Size( 1, pEnd2Pos->aLine.Height())); } } // The charrect may be outside the paintarea (for cursortravelling) // but the selection has to be restricted to the paintarea if( aStRect.Left() < aStFrm.Left() ) aStRect.Left( aStFrm.Left() ); else if( aStRect.Left() > aStFrm.Right() ) aStRect.Left( aStFrm.Right() ); SwTwips nTmp = aStRect.Right(); if( nTmp < aStFrm.Left() ) aStRect.Right( aStFrm.Left() ); else if( nTmp > aStFrm.Right() ) aStRect.Right( aStFrm.Right() ); if( aEndRect.Left() < aEndFrm.Left() ) aEndRect.Left( aEndFrm.Left() ); else if( aEndRect.Left() > aEndFrm.Right() ) aEndRect.Left( aEndFrm.Right() ); nTmp = aEndRect.Right(); if( nTmp < aEndFrm.Left() ) aEndRect.Right( aEndFrm.Left() ); else if( nTmp > aEndFrm.Right() ) aEndRect.Right( aEndFrm.Right() ); //Fall 1: (Gleicher Frame und gleiche Zeile) if( pStartFrm == pEndFrm && aStRect.Top() == aEndRect.Top() ) { SwRect aTmp( aStRect.Pos(), Point( aEndRect.Left(), aEndRect.Bottom() )); // Bug 34888: falls Inhalt selektiert ist, der keinen Platz // einnimmt (z.B. PostIts,RefMarks, TOXMarks), // dann mindestens die Breite des Crsr setzen. if( 1 == aTmp.Width() && pStartPos->nContent.GetIndex() != pEndPos->nContent.GetIndex() ) { OutputDevice* pOut = pSh->GetOut(); long nCrsrWidth = pOut->GetSettings().GetStyleSettings(). GetCursorSize(); aTmp.Width( pOut->PixelToLogic( Size( nCrsrWidth, 0 ) ).Width() ); } aTmp.Intersection( aStFrm ); Sub( aRegion, aTmp ); } //Fall 2: (Gleicher Frame ueber mehr als eine Zeile) else if( pStartFrm == pEndFrm ) { SwTwips lLeft, lRight; if( pSt2Pos && pEnd2Pos && pSt2Pos->aPortion == pEnd2Pos->aPortion ) { lLeft = pSt2Pos->aPortion.Left(); lRight = pSt2Pos->aPortion.Right(); } else { lLeft = pStartFrm->Frm().Left() + pStartFrm->Prt().Left(); lRight = pStartFrm->Frm().Left() + pStartFrm->Prt().Right(); } if( lLeft < aStFrm.Left() ) lLeft = aStFrm.Left(); if( lRight > aStFrm.Right() ) lRight = aStFrm.Right(); //Erste Zeile Sub( aRegion, SwRect( aStRect.Pos(),Point( lRight, aStRect.Bottom()))); //Wenn mindestens ein Twips zwischen Start- und Endzeile liegt, //so wird halt alles dazwischenliegende mit aufgenommen. if( (aStRect.Pos().Y()+aStRect.SSize().Height()) != aEndRect.Top() ) Sub( aRegion, SwRect( Point( lLeft, (aStRect.Pos().Y()+aStRect.SSize().Height()) ), Point( lRight, aEndRect.Top()-1 ))); //und die letzte Zeile Sub( aRegion, SwRect( Point( lLeft, aEndRect.Top() ), Point( aEndRect.Left(), aEndRect.Bottom() ))); } //Fall 3: (Unterschiedliche Frm's, moeglicherweise auch welche // dazwischen) else { //Erst den StartFrm verknurpseln... Sub( aRegion, SwRect( aStRect.Pos(), Point( aStFrm.Right(), aStRect.Bottom()))); if( aStFrm.Bottom() != aStRect.Bottom() ) Sub( aRegion, SwRect( Point( aStFrm.Left(), (aStRect.Pos().Y()+aStRect.SSize().Height()) ), Point( aStFrm.Right(), aStFrm.Bottom() ))); //Nun alles dazwischenliegende (kann auch nix sein)... BOOL bBody = pStartFrm->IsInDocBody(); const SwCntntFrm *pCntnt = pStartFrm->GetNextCntntFrm(); SwRect aPrvRect; // JP - 24.11.93: // wie kann man die Schleife noch optimieren, damit nur die Frames, die // in der VisArea liegen, beachtet werden while ( pCntnt != pEndFrm ) { if ( pCntnt->IsInFly() ) { const SdrObjectPtr pObj = (SdrObject*)pCntnt->FindFlyFrm()->GetVirtDrawObj(); aSortObjs.Insert( pObj ); } //Wenn ich im DocumentBody war, so beachte ich nur Frm's //die im Body liegen und umgekehrt. if ( bBody == pCntnt->IsInDocBody() ) { SwRect aCRect( pCntnt->UnionFrm( sal_True ) ); aCRect.Intersection( pCntnt->PaintArea() ); if( aCRect.IsOver( aRegion.GetOrigin() )) { SwRect aTmp( aPrvRect ); aTmp.Union( aCRect ); if ( (aPrvRect.Height() * aPrvRect.Width() + aCRect.Height() * aCRect.Width()) == (aTmp.Height() * aTmp.Width()) ) { aPrvRect.Union( aCRect ); } else { if ( aPrvRect.HasArea() ) Sub( aRegion, aPrvRect ); aPrvRect = aCRect; } } } pCntnt = pCntnt->GetNextCntntFrm(); } if ( aPrvRect.HasArea() ) Sub( aRegion, aPrvRect ); //Jetzt den EndFrm... if ( aEndFrm.Top() != aEndRect.Top() ) Sub( aRegion, SwRect( aEndFrm.Pos(), Point( aEndFrm.Right(), aEndRect.Top()-1 ) )); Sub( aRegion, SwRect( aEndFrm.Pos(), Point( aEndRect.Left(), aEndRect.Bottom() ))); } // aRegion.Compress( FALSE ); aRegion.Invert(); delete pSt2Pos; delete pEnd2Pos; } //Flys mit Durchlauf ausstanzen. Nicht ausgestanzt werden Flys: //- die Lower des StartFrm/EndFrm sind (FlyInCnt und alle Flys die wiederum // darin sitzen) //- in der Z-Order ueber denjenigen Flys stehen in denen sich der StartFrm // befindet. const SwPageFrm *pPage = pStartFrm->FindPageFrm(); const SwPageFrm *pEndPage = pEndFrm->FindPageFrm(); const SwFlyFrm *pStartFly = pStartFrm->FindFlyFrm(); const SwFlyFrm *pEndFly = pEndFrm->FindFlyFrm(); while ( pPage ) { if ( pPage->GetSortedObjs() ) { const SwSortDrawObjs &rObjs = *pPage->GetSortedObjs(); for ( USHORT i = 0; i < rObjs.Count(); ++i ) { SdrObject *pO = rObjs[i]; if ( !pO->IsWriterFlyFrame() ) continue; const SwVirtFlyDrawObj *pObj = (SwVirtFlyDrawObj*)pO; const SwLayoutFrm *pFly = pObj->GetFlyFrm(); const SwFmtSurround &rSur = pFly->GetFmt()->GetSurround(); if ( !pFly->IsAnLower( pStartFrm ) && (rSur.GetSurround() != SURROUND_THROUGHT && !rSur.IsContour()) ) { if ( USHRT_MAX != aSortObjs.Seek_Entry( pO ) ) continue; FASTBOOL bSub = TRUE; const UINT32 nPos = pObj->GetOrdNum(); for ( USHORT k = 0; bSub && k < aSortObjs.Count(); ++k ) { SwFlyFrm *pTmp = ((SwVirtFlyDrawObj*)aSortObjs[k])->GetFlyFrm(); do { if ( nPos < pTmp->GetVirtDrawObj()->GetOrdNumDirect() ) bSub = FALSE; else pTmp = pTmp->GetAnchor()->FindFlyFrm(); } while ( bSub && pTmp ); } if ( bSub ) Sub( aRegion, pFly->Frm() ); } } } if ( pPage == pEndPage ) break; else pPage = (SwPageFrm*)pPage->GetNext(); } //Weil's besser aussieht noch die DropCaps ausschliessen. SwRect aDropRect; if ( pStartFrm->IsTxtFrm() ) { if ( ((SwTxtFrm*)pStartFrm)->GetDropRect( aDropRect ) ) Sub( aRegion, aDropRect ); } if ( pEndFrm != pStartFrm && pEndFrm->IsTxtFrm() ) { if ( ((SwTxtFrm*)pEndFrm)->GetDropRect( aDropRect ) ) Sub( aRegion, aDropRect ); } rCrsr.Remove( 0, rCrsr.Count() ); rCrsr.Insert( &aRegion, 0 ); }