/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace com::sun::star; void SwTextBoxHelper::create(SwFrmFmt* pShape) { // If TextBox wasn't enabled previously if (!pShape->GetAttrSet().HasItem(RES_CNTNT)) { // Create the associated TextFrame and insert it into the document. uno::Reference xTextFrame(SwXServiceProvider::MakeInstance(SW_SERVICE_TYPE_TEXTFRAME, *pShape->GetDoc()), uno::UNO_QUERY); uno::Reference xTextDocument(pShape->GetDoc()->GetDocShell()->GetBaseModel(), uno::UNO_QUERY); uno::Reference xTextContentAppend(xTextDocument->getText(), uno::UNO_QUERY); xTextContentAppend->appendTextContent(xTextFrame, uno::Sequence()); // Initialize properties. uno::Reference xPropertySet(xTextFrame, uno::UNO_QUERY); uno::Any aEmptyBorder = uno::makeAny(table::BorderLine2()); xPropertySet->setPropertyValue(UNO_NAME_TOP_BORDER, aEmptyBorder); xPropertySet->setPropertyValue(UNO_NAME_BOTTOM_BORDER, aEmptyBorder); xPropertySet->setPropertyValue(UNO_NAME_LEFT_BORDER, aEmptyBorder); xPropertySet->setPropertyValue(UNO_NAME_RIGHT_BORDER, aEmptyBorder); xPropertySet->setPropertyValue(UNO_NAME_FILL_TRANSPARENCE, uno::makeAny(sal_Int32(100))); xPropertySet->setPropertyValue(UNO_NAME_SIZE_TYPE, uno::makeAny(text::SizeType::FIX)); uno::Reference xNamed(xTextFrame, uno::UNO_QUERY); xNamed->setName(pShape->GetDoc()->GetUniqueFrameName()); // Link its text range to the original shape. uno::Reference xTextBox(xTextFrame, uno::UNO_QUERY_THROW); SwUnoInternalPaM aInternalPaM(*pShape->GetDoc()); if (sw::XTextRangeToSwPaM(aInternalPaM, xTextBox)) { SwAttrSet aSet(pShape->GetAttrSet()); SwFmtCntnt aCntnt(aInternalPaM.GetNode().StartOfSectionNode()); aSet.Put(aCntnt); pShape->SetFmtAttr(aSet); } // Also initialize the properties, which are not constant, but inherited from the shape's ones. uno::Reference xShape(pShape->FindRealSdrObject()->getUnoShape(), uno::UNO_QUERY); syncProperty(pShape, RES_FRM_SIZE, MID_FRMSIZE_SIZE, uno::makeAny(xShape->getSize())); uno::Reference xShapePropertySet(xShape, uno::UNO_QUERY); syncProperty(pShape, RES_HORI_ORIENT, MID_HORIORIENT_ORIENT, xShapePropertySet->getPropertyValue(UNO_NAME_HORI_ORIENT)); syncProperty(pShape, RES_HORI_ORIENT, MID_HORIORIENT_RELATION, xShapePropertySet->getPropertyValue(UNO_NAME_HORI_ORIENT_RELATION)); syncProperty(pShape, RES_VERT_ORIENT, MID_VERTORIENT_ORIENT, xShapePropertySet->getPropertyValue(UNO_NAME_VERT_ORIENT)); syncProperty(pShape, RES_VERT_ORIENT, MID_VERTORIENT_RELATION, xShapePropertySet->getPropertyValue(UNO_NAME_VERT_ORIENT_RELATION)); syncProperty(pShape, RES_HORI_ORIENT, MID_HORIORIENT_POSITION, xShapePropertySet->getPropertyValue(UNO_NAME_HORI_ORIENT_POSITION)); syncProperty(pShape, RES_VERT_ORIENT, MID_VERTORIENT_POSITION, xShapePropertySet->getPropertyValue(UNO_NAME_VERT_ORIENT_POSITION)); syncProperty(pShape, RES_FRM_SIZE, MID_FRMSIZE_IS_AUTO_HEIGHT, xShapePropertySet->getPropertyValue(UNO_NAME_TEXT_AUTOGROWHEIGHT)); syncProperty(pShape, RES_TEXT_VERT_ADJUST, 0, xShapePropertySet->getPropertyValue(UNO_NAME_TEXT_VERT_ADJUST)); } } void SwTextBoxHelper::destroy(SwFrmFmt* pShape) { // If a TextBox was enabled previously if (pShape->GetAttrSet().HasItem(RES_CNTNT)) { SwFrmFmt* pFmt = findTextBox(pShape); // Unlink the TextBox's text range from the original shape. pShape->ResetFmtAttr(RES_CNTNT); // Delete the associated TextFrame. if (pFmt) pShape->GetDoc()->getIDocumentLayoutAccess().DelLayoutFmt(pFmt); } } std::set SwTextBoxHelper::findTextBoxes(const SwDoc* pDoc) { std::set aRet; const SwFrmFmts& rSpzFrmFmts = *pDoc->GetSpzFrmFmts(); for (SwFrmFmts::const_iterator it = rSpzFrmFmts.begin(); it != rSpzFrmFmts.end(); ++it) { SwFrmFmt* pTextBox = findTextBox(*it); if (pTextBox) aRet.insert(pTextBox); } return aRet; } std::set SwTextBoxHelper::findTextBoxes(const SwNode& rNode) { const SwDoc* pDoc = rNode.GetDoc(); const SwCntntNode* pCntntNode = 0; const SwCntntFrm* pCntntFrm = 0; bool bHaveViewShell = pDoc->getIDocumentLayoutAccess().GetCurrentViewShell(); if (bHaveViewShell && (pCntntNode = rNode.GetCntntNode()) && (pCntntFrm = pCntntNode->getLayoutFrm(pDoc->getIDocumentLayoutAccess().GetCurrentLayout()))) { // We can use the layout information to iterate over only the frames which are anchored to us. std::set aRet; const SwSortedObjs* pSortedObjs = pCntntFrm->GetDrawObjs(); if (pSortedObjs) { for (size_t i = 0; i < pSortedObjs->size(); ++i) { SwAnchoredObject* pAnchoredObject = (*pSortedObjs)[i]; SwFrmFmt* pTextBox = findTextBox(&pAnchoredObject->GetFrmFmt()); if (pTextBox) aRet.insert(pTextBox); } } return aRet; } else // If necessary, here we could manually limit the returned set to the // ones which are anchored to rNode, but currently no need to do so. return findTextBoxes(pDoc); } std::map SwTextBoxHelper::findShapes(const SwDoc* pDoc) { std::map aRet; const SwFrmFmts& rSpzFrmFmts = *pDoc->GetSpzFrmFmts(); for (SwFrmFmts::const_iterator it = rSpzFrmFmts.begin(); it != rSpzFrmFmts.end(); ++it) { SwFrmFmt* pTextBox = findTextBox(*it); if (pTextBox) aRet[pTextBox] = *it; } return aRet; } /// If the passed SdrObject is in fact a TextFrame, that is used as a TextBox. bool lcl_isTextBox(SdrObject* pSdrObject, std::set& rTextBoxes) { SwVirtFlyDrawObj* pObject = PTR_CAST(SwVirtFlyDrawObj, pSdrObject); return pObject && rTextBoxes.find(pObject->GetFmt()) != rTextBoxes.end(); } bool SwTextBoxHelper::isTextBox(const SdrObject* pObject) { const SwVirtFlyDrawObj* pVirtFlyDrawObj = PTR_CAST(SwVirtFlyDrawObj, pObject); if (!pVirtFlyDrawObj) return false; std::set aTextBoxes = findTextBoxes(pVirtFlyDrawObj->GetFmt()->GetDoc()); return aTextBoxes.find(pVirtFlyDrawObj->GetFmt()) != aTextBoxes.end(); } sal_Int32 SwTextBoxHelper::getCount(SdrPage* pPage, std::set& rTextBoxes) { sal_Int32 nRet = 0; for (size_t i = 0; i < pPage->GetObjCount(); ++i) { if (lcl_isTextBox(pPage->GetObj(i), rTextBoxes)) continue; ++nRet; } return nRet; } uno::Any SwTextBoxHelper::getByIndex(SdrPage* pPage, sal_Int32 nIndex, std::set& rTextBoxes) throw(lang::IndexOutOfBoundsException) { if (nIndex < 0 || nIndex >= getCount(pPage, rTextBoxes)) throw lang::IndexOutOfBoundsException(); SdrObject* pRet = 0; sal_Int32 nCount = 0; // Current logical index. for (size_t i = 0; i < pPage->GetObjCount(); ++i) { if (lcl_isTextBox(pPage->GetObj(i), rTextBoxes)) continue; if (nCount == nIndex) { pRet = pPage->GetObj(i); break; } ++nCount; } assert(pRet); return pRet ? uno::makeAny(uno::Reference(pRet->getUnoShape(), uno::UNO_QUERY)) : uno::Any(); } sal_Int32 SwTextBoxHelper::getOrdNum(const SdrObject* pObject, std::set& rTextBoxes) { if (const SdrPage* pPage = pObject->GetPage()) { sal_Int32 nOrder = 0; // Current logical order. for (size_t i = 0; i < pPage->GetObjCount(); ++i) { if (lcl_isTextBox(pPage->GetObj(i), rTextBoxes)) continue; if (pPage->GetObj(i) == pObject) return nOrder; ++nOrder; } } SAL_WARN("sw.core", "SwTextBoxHelper::getOrdNum: no page or page doesn't contain the object"); return pObject->GetOrdNum(); } SwFrmFmt* SwTextBoxHelper::findTextBox(uno::Reference xShape) { SwXShape* pShape = dynamic_cast(xShape.get()); if (!pShape) return 0; return findTextBox(pShape->GetFrmFmt()); } SwFrmFmt* SwTextBoxHelper::findTextBox(const SwFrmFmt* pShape) { SwFrmFmt* pRet = 0; // Only draw frames can have TextBoxes. if (pShape && pShape->Which() == RES_DRAWFRMFMT && pShape->GetAttrSet().HasItem(RES_CNTNT)) { const SwFmtCntnt& rCntnt = pShape->GetCntnt(); const SwFrmFmts& rSpzFrmFmts = *pShape->GetDoc()->GetSpzFrmFmts(); for (SwFrmFmts::const_iterator it = rSpzFrmFmts.begin(); it != rSpzFrmFmts.end(); ++it) { SwFrmFmt* pFmt = *it; // Only a fly frame can be a TextBox. if (pFmt->Which() == RES_FLYFRMFMT && pFmt->GetAttrSet().HasItem(RES_CNTNT) && pFmt->GetCntnt() == rCntnt) { pRet = pFmt; break; } } } return pRet; } template < typename T > void lcl_queryInterface(SwFrmFmt* pShape, uno::Any& rAny) { if (SwFrmFmt* pFmt = SwTextBoxHelper::findTextBox(pShape)) { uno::Reference const xInterface( SwXTextFrame::CreateXTextFrame(*pFmt->GetDoc(), pFmt), uno::UNO_QUERY); rAny <<= xInterface; } } uno::Any SwTextBoxHelper::queryInterface(SwFrmFmt* pShape, const uno::Type& rType) { uno::Any aRet; if (rType == cppu::UnoType::get()) { lcl_queryInterface(pShape, aRet); } else if (rType == cppu::UnoType::get()) { lcl_queryInterface(pShape, aRet); } else if (rType == cppu::UnoType::get()) { lcl_queryInterface(pShape, aRet); } return aRet; } Rectangle SwTextBoxHelper::getTextRectangle(SwFrmFmt* pShape, bool bAbsolute) { Rectangle aRet; aRet.SetEmpty(); SdrObjCustomShape* pCustomShape = dynamic_cast(pShape->FindRealSdrObject()); if (pCustomShape) { // Need to temporarily release the lock acquired in // SdXMLShapeContext::AddShape(), otherwise we get an empty rectangle, // see EnhancedCustomShapeEngine::getTextBounds(). uno::Reference xLockable(pCustomShape->getUnoShape(), uno::UNO_QUERY); sal_Int16 nLocks = 0; if (xLockable.is()) nLocks = xLockable->resetActionLocks(); pCustomShape->GetTextBounds(aRet); if (nLocks) xLockable->setActionLocks(nLocks); } if (!bAbsolute && pCustomShape) { // Relative, so count the logic (reference) rectangle, see the EnhancedCustomShape2d ctor. Point aPoint(pCustomShape->GetSnapRect().Center()); Size aSize(pCustomShape->GetLogicRect().GetSize()); aPoint.X() -= aSize.Width() / 2; aPoint.Y() -= aSize.Height() / 2; Rectangle aLogicRect(aPoint, aSize); aRet.Move(-1 * aLogicRect.Left(), -1 * aLogicRect.Top()); } return aRet; } void SwTextBoxHelper::syncProperty(SwFrmFmt* pShape, const OUString& rPropertyName, const css::uno::Any& rValue) { if (rPropertyName == "CustomShapeGeometry") { // CustomShapeGeometry changes the textbox position offset and size, so adjust both. syncProperty(pShape, RES_FRM_SIZE, MID_FRMSIZE_SIZE, uno::Any()); SdrObject* pObject = pShape->FindRealSdrObject(); if (pObject) { Rectangle aRectangle(pObject->GetSnapRect()); syncProperty(pShape, RES_HORI_ORIENT, MID_HORIORIENT_POSITION, uno::makeAny(static_cast(convertTwipToMm100(aRectangle.Left())))); syncProperty(pShape, RES_VERT_ORIENT, MID_VERTORIENT_POSITION, uno::makeAny(static_cast(convertTwipToMm100(aRectangle.Top())))); } if (SwFrmFmt* pFmt = findTextBox(pShape)) { comphelper::SequenceAsHashMap aCustomShapeGeometry(rValue); // That would be the btLr text direction which we don't support at a frame level, so do it at a character level. if (aCustomShapeGeometry.find("TextPreRotateAngle") != aCustomShapeGeometry.end() && aCustomShapeGeometry["TextPreRotateAngle"].get() == -270) { if (const SwNodeIndex* pNodeIndex = pFmt->GetCntnt().GetCntntIdx()) { SwPaM aPaM(*pFmt->GetDoc()->GetNodes()[pNodeIndex->GetIndex() + 1], 0); aPaM.SetMark(); if (SwTxtNode* pMark = pFmt->GetDoc()->GetNodes()[pNodeIndex->GetNode().EndOfSectionIndex() - 1]->GetTxtNode()) { aPaM.GetMark()->nNode = *pMark; aPaM.GetMark()->nContent.Assign(pMark, pMark->GetTxt().getLength()); SvxCharRotateItem aItem(900, false, RES_CHRATR_ROTATE); pFmt->GetDoc()->getIDocumentContentOperations().InsertPoolItem(aPaM, aItem, 0); } } } } } else if (rPropertyName == UNO_NAME_TEXT_VERT_ADJUST) syncProperty(pShape, RES_TEXT_VERT_ADJUST, 0, rValue); else if (rPropertyName == UNO_NAME_TEXT_AUTOGROWHEIGHT) syncProperty(pShape, RES_FRM_SIZE, MID_FRMSIZE_IS_AUTO_HEIGHT, rValue); } void SwTextBoxHelper::getProperty(SwFrmFmt* pShape, sal_uInt16 nWID, sal_uInt8 nMemberId, css::uno::Any& rValue) { if (!pShape) return; nMemberId &= ~CONVERT_TWIPS; if (SwFrmFmt* pFmt = findTextBox(pShape)) { if (nWID == RES_CHAIN) { switch (nMemberId) { case MID_CHAIN_PREVNAME: case MID_CHAIN_NEXTNAME: { const SwFmtChain& rChain = pFmt->GetChain(); rChain.QueryValue(rValue, nMemberId); } break; case MID_CHAIN_NAME: rValue = uno::makeAny(pFmt->GetName()); break; } } } } void SwTextBoxHelper::syncProperty(SwFrmFmt* pShape, sal_uInt16 nWID, sal_uInt8 nMemberId, const css::uno::Any& rValue) { // No shape yet? Then nothing to do, initial properties are set by create(). if (!pShape) return; uno::Any aValue(rValue); nMemberId &= ~CONVERT_TWIPS; if (SwFrmFmt* pFmt = findTextBox(pShape)) { OUString aPropertyName; bool bAdjustX = false; bool bAdjustY = false; bool bAdjustSize = false; switch (nWID) { case RES_HORI_ORIENT: switch (nMemberId) { case MID_HORIORIENT_ORIENT: aPropertyName = UNO_NAME_HORI_ORIENT; break; case MID_HORIORIENT_RELATION: aPropertyName = UNO_NAME_HORI_ORIENT_RELATION; break; case MID_HORIORIENT_POSITION: aPropertyName = UNO_NAME_HORI_ORIENT_POSITION; bAdjustX = true; break; } break; case RES_VERT_ORIENT: switch (nMemberId) { case MID_VERTORIENT_ORIENT: aPropertyName = UNO_NAME_VERT_ORIENT; break; case MID_VERTORIENT_RELATION: aPropertyName = UNO_NAME_VERT_ORIENT_RELATION; break; case MID_VERTORIENT_POSITION: aPropertyName = UNO_NAME_VERT_ORIENT_POSITION; bAdjustY = true; break; } break; case RES_FRM_SIZE: switch (nMemberId) { case MID_FRMSIZE_IS_AUTO_HEIGHT: aPropertyName = UNO_NAME_FRAME_ISAUTOMATIC_HEIGHT; break; default: aPropertyName = UNO_NAME_SIZE; bAdjustSize = true; break; } break; case RES_ANCHOR: switch (nMemberId) { case MID_ANCHOR_ANCHORTYPE: if (aValue.get() == text::TextContentAnchorType_AS_CHARACTER) { uno::Reference const xPropertySet( SwXTextFrame::CreateXTextFrame(*pFmt->GetDoc(), pFmt), uno::UNO_QUERY); xPropertySet->setPropertyValue(UNO_NAME_SURROUND, uno::makeAny(text::WrapTextMode_THROUGHT)); return; } break; } break; case FN_TEXT_RANGE: { uno::Reference xRange; rValue >>= xRange; SwUnoInternalPaM aInternalPaM(*pFmt->GetDoc()); if (sw::XTextRangeToSwPaM(aInternalPaM, xRange)) { SwFmtAnchor aAnchor(pFmt->GetAnchor()); aAnchor.SetAnchor(aInternalPaM.Start()); pFmt->SetFmtAttr(aAnchor); } } break; case RES_CHAIN: switch (nMemberId) { case MID_CHAIN_PREVNAME: aPropertyName = UNO_NAME_CHAIN_PREV_NAME; break; case MID_CHAIN_NEXTNAME: aPropertyName = UNO_NAME_CHAIN_NEXT_NAME; break; } break; case RES_TEXT_VERT_ADJUST: aPropertyName = UNO_NAME_TEXT_VERT_ADJUST; break; } if (!aPropertyName.isEmpty()) { // Position/size should be the text position/size, not the shape one as-is. if (bAdjustX || bAdjustY || bAdjustSize) { Rectangle aRect = getTextRectangle(pShape, /*bAbsolute=*/false); if (!aRect.IsEmpty()) { if (bAdjustX || bAdjustY) { sal_Int32 nValue; if (aValue >>= nValue) { if (bAdjustX) nValue += TWIPS_TO_MM(aRect.getX()); else if (bAdjustY) nValue += TWIPS_TO_MM(aRect.getY()); aValue <<= nValue; } } else if (bAdjustSize) { awt::Size aSize(TWIPS_TO_MM(aRect.getWidth()), TWIPS_TO_MM(aRect.getHeight())); aValue <<= aSize; } } } uno::Reference const xPropertySet( SwXTextFrame::CreateXTextFrame(*pFmt->GetDoc(), pFmt), uno::UNO_QUERY); xPropertySet->setPropertyValue(aPropertyName, aValue); } } } void SwTextBoxHelper::saveLinks(const SwFrmFmts& rFormats, std::map& rLinks) { for (size_t i = 0; i < rFormats.size(); ++i) { const SwFrmFmt* pFmt = rFormats[i]; if (pFmt->Which() != RES_DRAWFRMFMT) continue; if (SwFrmFmt* pTextBox = findTextBox(pFmt)) rLinks[pFmt] = pTextBox; } } void SwTextBoxHelper::resetLink(SwFrmFmt* pShape, std::map& rMap) { if (pShape->Which() == RES_DRAWFRMFMT) { if (pShape->GetCntnt().GetCntntIdx()) rMap.insert(std::make_pair(pShape, pShape->GetCntnt())); pShape->ResetFmtAttr(RES_CNTNT); } } void SwTextBoxHelper::restoreLinks(std::set<_ZSortFly>& rOld, std::vector& rNew, SavedLink& rSavedLinks, SavedContent& rOldContent) { size_t i = 0; for (std::set<_ZSortFly>::iterator aSetIt = rOld.begin(); aSetIt != rOld.end(); ++aSetIt, ++i) { SavedLink::iterator aTextBoxIt = rSavedLinks.find(aSetIt->GetFmt()); if (aTextBoxIt != rSavedLinks.end()) { size_t j = 0; for (std::set<_ZSortFly>::iterator aSetJt = rOld.begin(); aSetJt != rOld.end(); ++aSetJt, ++j) { if (aSetJt->GetFmt() == aTextBoxIt->second) rNew[i]->SetFmtAttr(rNew[j]->GetCntnt()); } } if (rOldContent.find(aSetIt->GetFmt()) != rOldContent.end()) const_cast(aSetIt->GetFmt())->SetFmtAttr(rOldContent[aSetIt->GetFmt()]); } } void SwTextBoxHelper::syncFlyFrmAttr(SwFrmFmt& rShape, SfxItemSet& rSet) { if (SwFrmFmt* pFmt = findTextBox(&rShape)) { SfxItemSet aTextBoxSet(pFmt->GetDoc()->GetAttrPool(), aFrmFmtSetRange); SfxItemIter aIter(rSet); sal_uInt16 nWhich = aIter.GetCurItem()->Which(); do { switch (nWhich) { case RES_VERT_ORIENT: { const SwFmtVertOrient& rOrient = static_cast(*aIter.GetCurItem()); SwFmtVertOrient aOrient(rOrient); Rectangle aRect = getTextRectangle(&rShape, /*bAbsolute=*/false); if (!aRect.IsEmpty()) aOrient.SetPos(aOrient.GetPos() + aRect.getY()); aTextBoxSet.Put(aOrient); } break; case RES_HORI_ORIENT: { const SwFmtHoriOrient& rOrient = static_cast(*aIter.GetCurItem()); SwFmtHoriOrient aOrient(rOrient); Rectangle aRect = getTextRectangle(&rShape, /*bAbsolute=*/false); if (!aRect.IsEmpty()) aOrient.SetPos(aOrient.GetPos() + aRect.getX()); aTextBoxSet.Put(aOrient); } break; case RES_FRM_SIZE: { // In case the shape got resized, then we need to adjust both // the position and the size of the textbox (e.g. larger // rounded edges of a rectangle -> need to push right/down the // textbox). SwFmtVertOrient aVertOrient(rShape.GetVertOrient()); SwFmtHoriOrient aHoriOrient(rShape.GetHoriOrient()); SwFmtFrmSize aSize(pFmt->GetFrmSize()); Rectangle aRect = getTextRectangle(&rShape, /*bAbsolute=*/false); if (!aRect.IsEmpty()) { aVertOrient.SetPos(aVertOrient.GetPos() + aRect.getY()); aTextBoxSet.Put(aVertOrient); aHoriOrient.SetPos(aHoriOrient.GetPos() + aRect.getX()); aTextBoxSet.Put(aHoriOrient); aSize.SetWidth(aRect.getWidth()); aSize.SetHeight(aRect.getHeight()); aTextBoxSet.Put(aSize); } } break; default: SAL_WARN("sw.core", "SwTextBoxHelper::syncFlyFrmAttr: unhandled which-id: " << nWhich); break; } if (aIter.IsAtEnd()) break; } while (0 != (nWhich = aIter.NextItem()->Which())); if (aTextBoxSet.Count()) pFmt->GetDoc()->SetFlyFrmAttr(*pFmt, aTextBoxSet); } } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */