/************************************************************************* * * $RCSfile: doc.hxx,v $ * * $Revision: 1.13 $ * * last change: $Author: jp $ $Date: 2001-01-23 20:19:08 $ * * The Contents of this file are made available subject to the terms of * either of the following licenses * * - GNU Lesser General Public License Version 2.1 * - Sun Industry Standards Source License Version 1.1 * * Sun Microsystems Inc., October, 2000 * * GNU Lesser General Public License Version 2.1 * ============================================= * Copyright 2000 by Sun Microsystems, Inc. * 901 San Antonio Road, Palo Alto, CA 94303, USA * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software Foundation. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * * Sun Industry Standards Source License Version 1.1 * ================================================= * The contents of this file are subject to the Sun Industry Standards * Source License Version 1.1 (the "License"); You may not use this file * except in compliance with the License. You may obtain a copy of the * License at http://www.openoffice.org/license.html. * * Software provided under this License is provided on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. * See the License for the specific provisions governing your rights and * obligations concerning the Software. * * The Initial Developer of the Original Code is: Sun Microsystems, Inc. * * Copyright: 2000 by Sun Microsystems, Inc. * * All Rights Reserved. * * Contributor(s): _______________________________________ * * ************************************************************************/ #ifndef _DOC_HXX #define _DOC_HXX #define _SVSTDARR_STRINGSDTOR #include #ifndef _TIMER_HXX //autogen #include #endif #ifndef _SWTYPES_HXX #include #endif #ifndef _NDARR_HXX #include #endif #ifndef _SWATRSET_HXX #include #endif #ifndef _TOXE_HXX #include // enums #endif #ifndef _REDLENUM_HXX #include // enums #endif #ifndef _BKMRKE_HXX #include #endif #ifndef _FLYENUM_HXX #include #endif #ifndef _ITABENUM_HXX #include #endif #ifndef _COM_SUN_STAR_LINGUISTIC2_XSPELLCHECKER1_HPP_ #include #endif #ifndef _COM_SUN_STAR_LINGUISTIC2_XHYPHENATEDWORD_HPP_ #include #endif class SwExtTextInput; class DateTime; class EditFieldInfo; class JobSetup; class Color; class KeyCode; class Outliner; class OutputDevice; class Point; class SbxArray; class SdrModel; class SdrObject; class SdrUndoAction; class SfxDocumentInfo; class SfxPrinter; class SvData; class SvEmbeddedObjectRef; class SvNumberFormatter; class SvPersist; class SvPseudoObject; class SvStorage; class SvStrings; class SvStringsSort; class SvUShorts; class SvUShortsSort; class SvxAutoCorrDoc; class SvxLinkManager; class SvxMacro; class SvxMacroTableDtor; class SvxBorderLine; class SwAutoCompleteWord; class SwAutoCorrExceptWord; class SwBookmark; class SwBookmarks; class SwCalc; class SwCellFrm; class SwCharFmt; class SwCharFmts; class SwClient; class SwConditionTxtFmtColl; class SwCrsrShell; class SwCursor; class SwDBNameInfField; class SwDocShell; class SwDocUpdtFld; class SwDrawFrmFmt; class SwDrawView; class SwEditShell; class SwFieldType; class SwFldTypes; class SwFlyFrm; class SwFlyFrmFmt; class SwFmt; class SwFmtCol; class SwFmtINetFmt; class SwFmtRefMark; class SwForbiddenCharacterTable; class SwFrmFmt; class SwFrmFmts; class SwFtnIdxs; class SwFtnInfo; class SwEndNoteInfo; class GraphicObject; class SwGrfFmtColl; class SwGrfFmtColls; class SwLineNumberInfo; class SwNewDBMgr; class SwNoTxtNode; class SwNodeIndex; class SwNodeRange; class SwNumRule; class SwNumRuleTbl; class SwPageDesc; class SwPosFlyFrms; class SwPagePreViewPrtData; class SwRedline; class SwRedlineTbl; class SwRootFrm; class SwRubyList; class SwRubyListEntry; class SwSectionFmt; class SwSectionFmts; class SwSelBoxes; class SwSpzFrmFmts; class SwTOXBase; class SwTOXBaseSection; class SwTOXMark; class SwTOXMarks; class SwTOXType; class SwTOXTypes; class SwTabCols; class SwTable; class SwTableAutoFmt; class SwTableBox; class SwTableBoxFmt; class SwTableFmt; class SwTableLineFmt; class SwTableNode; class SwTextBlocks; class SwTxtFld; class SwTxtFmtColl; class SwTxtFmtColls; class SwURLStateChanged; class SwUndo; class SwUndoIds; class SwUndoIter; class SwUndos; class SwUnoCrsr; class SwUnoCrsrTbl; class ViewShell; class _SetGetExpFld; class SwDrawContact; class SwLayouter; class SdrView; class SdrMarkList; class SwAuthEntry; class SwUnoCallBack; struct SwCallMouseEvent; struct SwDocStat; struct SwHash; struct SwSortOptions; struct SwDefTOXBase_Impl; namespace com { namespace sun { namespace star { namespace i18n { struct ForbiddenCharacters; // comes from the I18N UNO interface }}}}; namespace utl { class TransliterationWrapper; }; //PageDescriptor-Schnittstelle, Array hier wegen inlines. typedef SwPageDesc* SwPageDescPtr; SV_DECL_PTRARR_DEL( SwPageDescs, SwPageDescPtr, 4, 4 ); enum SwMoveFlags { DOC_MOVEDEFAULT = 0x00, DOC_MOVEALLFLYS = 0x01, DOC_CREATEUNDOOBJ = 0x02, DOC_MOVEREDLINES = 0x04 }; #define DUMMY_PARASPACEMAX 0x04 #define DUMMY_PARASPACEMAX_AT_PAGES 0x20 #define SW_HYPH_ERROR 0 #define SW_HYPH_OK 1 #define SW_HYPH_ABORTED 2 #define SW_HYPH_CONTINUE 3 class SwDoc { friend class SwReader; // fuers Undo von Insert(SwDoc) friend class SwSwgReader; // Zugriff auf bDtor-Flag (wg. Loeschen v.Frames) friend class Sw3IoImp; // Zugriff u.a. auf den Drawing Layer friend class SwCompareData; // fuers Undo vom CompareDoc friend void _InitCore(); friend void _FinitCore(); //Fuer das Loeschen der Header-/Footer-Formate //Implementierung und Benutzung in frmatr.cxx friend void DelHFFormat( SwClient *, SwFrmFmt * ); #if !( defined(PRODUCT) || defined(MAC) || defined(PM2) ) friend class SwUndoWriter; // fuers Schreiben der Undo/Redo-History #endif //---------------- private Member -------------------------------- // ------------------------------------------------------------------- // die Objecte SwNodes aNodes; // Inhalt des Dokumentes SwNodes aUndoNodes; // Inhalt fuer das Undo SwAttrPool aAttrPool; // der Attribut Pool SwPageDescs aPageDescs; // PageDescriptoren Link aOle2Link; // OLE 2.0-Benachrichtigung AutoTimer aIdleTimer; // der eigene IdleTimer Timer aChartTimer; // der Timer fuers Update aller Charts Timer aOLEModifiedTimer; // Timer for update modified OLE-Objecs String aDBName; // logischer Datenbankname String sSectionPasswd; // Passwort fuer geschuetzte Bereiche String sTOIAutoMarkURL; // ::com::sun::star::util::URL of table of index AutoMark file SvStringsDtor aPatternNms; // Array fuer die Namen der Dokument-Vorlagen // ------------------------------------------------------------------- // die Pointer //Defaultformate SwFrmFmt *pDfltFrmFmt; SwFrmFmt *pEmptyPageFmt; // Format fuer die Default-Leerseite. SwFrmFmt *pColumnContFmt; // Format fuer Spaltencontainer SwCharFmt *pDfltCharFmt; SwTxtFmtColl *pDfltTxtFmtColl; // Defaultformatcollections SwGrfFmtColl *pDfltGrfFmtColl; SwFrmFmts *pFrmFmtTbl; // Formattabellen SwCharFmts *pCharFmtTbl; SwSpzFrmFmts *pSpzFrmFmtTbl; SwSectionFmts *pSectionFmtTbl; SwFrmFmts *pTblFrmFmtTbl; // spz. fuer Tabellen SwTxtFmtColls *pTxtFmtCollTbl; // FormatCollections SwGrfFmtColls *pGrfFmtCollTbl; SwBookmarks *pBookmarkTbl; //Bookmarks SwTOXTypes *pTOXTypes; // Verzeichnisse SwDefTOXBase_Impl * pDefTOXBases; // defaults of SwTOXBase's SwRootFrm *pLayout; // Rootframe des spezifischen Layouts. SdrModel *pDrawModel; // StarView Drawing SwUndos *pUndos; // Undo/Redo History SwDocUpdtFld *pUpdtFlds; // Struktur zum Field-Update SwFldTypes *pFldTypes; // Feldtypen SwNewDBMgr *pNewDBMgr; // Pointer auf den neuen DBMgr fuer // Evaluierung der DB-Fields SfxPrinter *pPrt; SwDoc *pGlossaryDoc; // Pointer auf das Glossary-Dokument. Dieses SwNumRule *pOutlineRule; SwFtnInfo *pFtnInfo; SwEndNoteInfo *pEndNoteInfo; SwLineNumberInfo *pLineNumberInfo; SwFtnIdxs *pFtnIdxs; SwDocStat *pDocStat; // Statistic Informationen SfxDocumentInfo *pSwgInfo; // Dokumentinformationen SvxMacroTableDtor *pMacroTable; // Tabelle der dokumentglobalen Macros SwDocShell *pDocShell; // Ptr auf die SfxDocShell vom Doc SvEmbeddedObjectRef* pDocShRef; // fuers Kopieren von OLE-Nodes (wenn keine // DocShell gesetzt ist, muss dieser // Ref-Pointer gesetzt sein!!!!) SvxLinkManager *pLinkMgr; // Liste von Verknuepften (Grafiken/DDE/OLE) SwAutoCorrExceptWord *pACEWord; // fuer die automatische Uebernahme von // autokorrigierten Woertern, die "zurueck" // verbessert werden SwURLStateChanged *pURLStateChgd; // SfxClient fuer Aenderungen in der // INetHistory SvNumberFormatter *pNumberFormatter; // NumFormatter fuer die Tabellen/Felder SwNumRuleTbl *pNumRuleTbl; // Liste aller benannten NumRules SwRedlineTbl *pRedlineTbl; // Liste aller Redlines String *pAutoFmtRedlnComment; // Kommentar fuer Redlines, die // uebers Autoformat eingefuegt werden SwUnoCrsrTbl *pUnoCrsrTbl; SwPagePreViewPrtData *pPgPViewPrtData; // Einzuege/Abstaende fuers // Drucken der Seitenansicht SwPaM *pExtInputRing; SwLayouter *pLayouter; // ::com::sun::star::frame::Controller for complex layout formatting // like footnote/endnote in sections SwUnoCallBack *pUnoCallBack; SwForbiddenCharacterTable* pForbiddenCharsTbl; // table of forbidden // characters of this document // ------------------------------------------------------------------- // sonstige sal_uInt16 nUndoPos; // akt. Undo-InsertPosition (fuers Redo!) sal_uInt16 nUndoSavePos; // Position im Undo-Array, ab der das Doc // nicht als modifiziert gilt sal_uInt16 nUndoCnt; // Anzahl von Undo Aktionen sal_uInt16 nUndoSttEnd; // != 0 -> innerhalb einer Klammerung sal_uInt16 nAutoFmtRedlnCommentNo; // SeqNo fuers UI-seitige zusammenfassen // von AutoFmt-Redlines. Wird vom SwAutoFmt // verwaltet! sal_uInt16 nLinkUpdMode; // UpdateMode fuer Links sal_uInt16 nFldUpdMode; // Mode fuer Felder/Charts automatisch aktualisieren sal_uInt16 nLatin_CJK; // distance between Latin- and CJK-script sal_uInt16 nLatin_CTL; // distance between Latin- and CTL-script sal_uInt16 nCJK_CTL; // distance between CJK- and CTL-script SwRedlineMode eRedlineMode; // aktueller Redline Modus sal_Int8 nLinkCt; // wieviele kennen das Dokument sal_Int8 nLockExpFld; // Wenn != 0 hat UpdateExpFlds() keine Wirkung sal_Int8 nHeaven; // LayerIds, Heaven == ueber dem Dokument sal_Int8 nHell; // Hell == unter dem Dokument sal_Int8 nControls; // Controls == ganz oben sal_Bool bGlossDoc : 1; //TRUE: ist ein Textbaustein Dokument sal_Bool bModified : 1; //TRUE: Dokument ist veraendert sal_Bool bDtor : 1; //TRUE: ist im SwDoc DTOR // leider auch temporaer von // SwSwgReader::InLayout(), wenn fehlerhafte //Frames geloescht werden muessen sal_Bool bUndo : 1; // TRUE: Undo eingeschaltet sal_Bool bGroupUndo : 1; // TRUE: Undos werden gruppiert sal_Bool bPageNums : 1; // TRUE: es gibt virtuelle Seitennummern sal_Bool bLoaded : 1; // TRUE: ein geladenes Doc sal_Bool bUpdateExpFld : 1; // TRUE: Expression-Felder updaten sal_Bool bNewDoc : 1; // TRUE: neues Doc sal_Bool bNewFldLst : 1; // TRUE: Felder-Liste neu aufbauen sal_Bool bCopyIsMove : 1; // TRUE: Copy ist ein verstecktes Move sal_Bool bNoDrawUndoObj : 1; // TRUE: keine DrawUndoObjecte speichern sal_Bool bVisibleLinks : 1; // TRUE: Links werden sichtbar eingefuegt sal_Bool bBrowseMode : 1; // TRUE: Dokument im BrowseModus anzeigen sal_Bool bInReading : 1; // TRUE: Dokument wird gerade gelesen sal_Bool bUpdateTOX : 1; // TRUE: nach Dokument laden die TOX Updaten sal_Bool bInLoadAsynchron: 1; // TRUE: Dokument wird gerade asynchron geladen sal_Bool bHTMLMode : 1; // TRUE: Dokument ist im HTMLMode sal_Bool bHeadInBrowse : 1; // TRUE: Header sind im BrowseMode aktiviert sal_Bool bFootInBrowse : 1; // TRUE: Footer sind im BrowseMode aktiviert sal_Bool bFrmBeepEnabled : 1; // TRUE: Frames beepen wenn der Inhalt zu gross wird sal_Bool bInCallModified : 1; // TRUE: im Set/Reset-Modified Link sal_Bool bIsGlobalDoc : 1; // TRUE: es ist ein GlobalDokument sal_Bool bGlblDocSaveLinks : 1; // TRUE: im GlobalDoc. gelinkte Sect. mit speichern sal_Bool bIsLabelDoc : 1; // TRUE: es ist ein Etiketten-Dokument sal_Bool bIsAutoFmtRedline : 1; // TRUE: die Redlines werden vom Autoformat aufgezeichnet sal_Bool bOLEPrtNotifyPending:1; // TRUE: Printer ist geaendert und beim // Erzeugen der ::com::sun::star::sdbcx::View ist eine Benachrichtigung // der OLE-Objekte PrtOLENotify() notwendig. sal_Bool bAllOLENotify :1; // True: Benachrichtigung aller Objekte ist notwendig sal_Bool bIsRedlineMove : 1; // True: die Redlines werden in/aus der Section verschoben sal_Bool bInsOnlyTxtGlssry : 1; // True: insert 'only text' glossary into doc sal_Bool bContains_MSVBasic : 1; // True: MS-VBasic exist is in our storage sal_Bool bPurgeOLE : 1; // TRUE: Purge OLE-Objects #ifndef PRODUCT sal_Bool bXMLExport : 1; // TRUE: during XML export #endif // ------------------------------------------------------------------- // static - Members static SvStringsDtor *pTextNmArray, // Array fuer alle *pListsNmArray, // Pool-Vorlagen-Namen *pExtraNmArray, *pRegisterNmArray, *pDocNmArray, *pHTMLNmArray; static SvStringsDtor *pFrmFmtNmArray, *pChrFmtNmArray, *pHTMLChrFmtNmArray; static SvStringsDtor *pPageDescNmArray; static SvStringsDtor *pNumRuleNmArray; static SwAutoCompleteWord *pACmpltWords; // Liste aller Worte fuers AutoComplete static sal_uInt16 nUndoActions; // anzahl von Undo ::com::sun::star::chaos::Action // ------------------------------------------------------------------- // Dummies Members fuers FileFormat String sDummy1; // Dummy-Member. String sDummy2; sal_uInt32 n32Dummy1; sal_uInt32 n32Dummy2; sal_Int8 n8Dummy1; sal_Int8 n8Dummy2; //---------------- private Methoden ------------------------------ void AppendUndo(SwUndo*); // interne Verkuerzung fuer Insert am Ende void ClearRedo(); // loescht alle UndoObjecte von nUndoPos // bis zum Ende des Undo-Arrays sal_Bool DelUndoObj( sal_uInt16 nEnde ); // loescht alle UndoObjecte vom Anfang // bis zum angegebenen Ende DECL_LINK( AddDrawUndo, SdrUndoAction * ); // DrawModel void DrawNotifyUndoHdl(); // wegen CLOOKs void DrawSetRefDevice(); // wegen CLOOKs // nur fuer den internen Gebrauch deshalb privat. // Kopieren eines Bereiches im oder in ein anderes Dokument ! // Die Position darf nicht im Bereich liegen !! sal_Bool _Copy( SwPaM&, SwPosition&, sal_Bool MakeNewFrms = sal_True, SwPaM* pCpyRng = 0 ) const; // in ndcopy.cxx SwFlyFrmFmt* _MakeFlySection( const SwPosition& rAnchPos, const SwCntntNode& rNode, RndStdIds eRequestId, const SfxItemSet* pFlyAttrSet, SwFrmFmt* = 0 ); SwFlyFrmFmt* _InsNoTxtNode( const SwPosition&rPos, SwNoTxtNode*, const SfxItemSet* pFlyAttrSet, const SfxItemSet* pGrfAttrSet, SwFrmFmt* = 0 ); void _CopyFlyInFly( const SwNodeRange& rRg, const SwNodeIndex& rSttIdx, sal_Bool bCopyFlyAtFly = sal_False ) const; // steht im ndcopy.cxx sal_Bool SetFlyFrmAnchor( SwFrmFmt& rFlyFmt, SfxItemSet& rSet, sal_Bool bNewFrms ); typedef SwFmt* (SwDoc:: *FNCopyFmt)( const String&, SwFmt* ); SwFmt* CopyFmt( const SwFmt& rFmt, const SvPtrarr& rFmtArr, FNCopyFmt fnCopyFmt, const SwFmt& rDfltFmt ); void CopyFmtArr( const SvPtrarr& rSourceArr, SvPtrarr& rDestArr, FNCopyFmt fnCopyFmt, SwFmt& rDfltFmt ); void _CopyPageDescHeaderFooter( sal_Bool bCpyHeader, const SwFrmFmt& rSrcFmt, SwFrmFmt& rDestFmt ); SwFmt* FindFmtByName( const SvPtrarr& rFmtArr, const String& rName ) const; SfxPrinter* _GetPrt() const; void PrtDataChanged(); //Printer oder JobSetup geandert, es muss //fuer entsprechende Invalidierungen und //Benachrichtigungen gesorgt werden. static SvStringsDtor* NewNmArray( SvStringsDtor*&, sal_uInt16 nStt, sal_uInt16 nEnd ); SvStringsDtor* NewTextNmArray() const; SvStringsDtor* NewListsNmArray() const; SvStringsDtor* NewExtraNmArray() const; SvStringsDtor* NewRegisterNmArray() const; SvStringsDtor* NewDocNmArray() const; SvStringsDtor* NewHTMLNmArray() const; SvStringsDtor* NewFrmFmtNmArray() const; SvStringsDtor* NewChrFmtNmArray() const; SvStringsDtor* NewHTMLChrFmtNmArray() const; SvStringsDtor* NewPageDescNmArray() const; SvStringsDtor* NewNumRuleNmArray() const; // gcc: aFtnInfo::CopyCtor ist private, also muessen wir uns auch schuetzen SwDoc( const SwDoc &); //wird nur von SwSwgReader::InlayoutFrames() verwendet! inline void SetInDtor( sal_Bool b ) { bDtor = b; } // fuer Felder: void _InitFieldTypes(); // wird vom CTOR gerufen!! void _MakeFldList( int eMode ); void RenameUserFld( const String& rOldName, const String& rNewName, String& rFormel ); // Datenbankfelder: void UpdateDBNumFlds( SwDBNameInfField& rDBFld, SwCalc& rCalc ); void AddUsedDBToList( SvStringsDtor& rDBNameList, const SvStringsDtor& rUsedDBNames ); void AddUsedDBToList( SvStringsDtor& rDBNameList, const String& rDBName ); sal_Bool IsNameInArray( const SvStringsDtor& rOldNames, const String& rName ); void GetAllDBNames( SvStringsDtor& rAllDBNames ); void ReplaceUsedDBs( const SvStringsDtor& rUsedDBNames, const String& rNewName, String& rFormel ); SvStringsDtor& FindUsedDBs( const SvStringsDtor& rAllDBNames, const String& rFormel, SvStringsDtor& rUsedDBNames ); void InitDrawModel(); void ReleaseDrawModel(); void _CreateNumberFormatter(); sal_Bool _UnProtectTblCells( SwTable& rTbl ); // erzeuge Anhand der vorgebenen Collection Teildokumente // falls keine angegeben ist, nehme die Kapitelvorlage der 1. Ebene sal_Bool SplitDoc( sal_uInt16 eDocType, const String& rPath, const SwTxtFmtColl* pSplitColl ); // Charts der angegebenen Tabelle updaten void _UpdateCharts( const SwTable& rTbl, ViewShell& rVSh ) const; BOOL _SelectNextRubyChars( SwPaM& rPam, SwRubyListEntry& rRubyEntry, USHORT nMode ); // unser eigener 'IdlTimer' ruft folgende Methode DECL_LINK( DoIdleJobs, Timer * ); // der CharTimer ruft diese Methode DECL_LINK( DoUpdateAllCharts, Timer * ); DECL_LINK( DoUpdateModifiedOLE, Timer * ); public: SwDoc(); ~SwDoc(); SwNodes& GetNodes() { return aNodes; } const SwNodes& GetNodes() const { return aNodes; } DECL_STATIC_LINK( SwDoc, BackgroundDone, SvxBrushItem *); DECL_LINK(CalcFieldValueHdl, EditFieldInfo*); // Links un-/sichtbar in LinkManager einfuegen (gelinkte Bereiche) sal_Bool IsVisibleLinks() const { return bVisibleLinks; } void SetVisibleLinks( sal_Bool bFlag ) { bVisibleLinks = bFlag; } SvxLinkManager& GetLinkManager() { return *pLinkMgr; } const SvxLinkManager& GetLinkManager() const { return *pLinkMgr; } // erfrage das spezifische Layout const SwRootFrm* GetRootFrm() const { return pLayout; } SwRootFrm* GetRootFrm() { return pLayout; } // der alte muss !! von der Shell geloescht werden !! void SetRootFrm( SwRootFrm* pNew ) { pLayout = pNew; } void StartIdleTimer() { aIdleTimer.Start(); } void StopIdleTimer() { aIdleTimer.Stop(); } sal_Bool IsIdleTimerActive() const { return aIdleTimer.IsActive(); } sal_Bool IsOLEPrtNotifyPending() const { return bOLEPrtNotifyPending; } void SetOLEPrtNotifyPending() { bOLEPrtNotifyPending = sal_True; } void PrtOLENotify( sal_Bool bAll ); //Alle oder nur Markierte sal_Bool IsPurgeOLE() const { return bPurgeOLE; } void SetPurgeOLE( sal_Bool bFlag ) { bPurgeOLE = bFlag; } #ifndef PRODUCT sal_Bool InXMLExport() const { return bXMLExport; } void SetXMLExport( sal_Bool bFlag ) { bXMLExport = bFlag; } #endif // das Dokument im Browse-Modus anzeigen void SetBrowseMode( sal_Bool bFlag = sal_True ) { bBrowseMode = bFlag; } sal_Bool IsBrowseMode() const { return bBrowseMode; } void SetHTMLMode( sal_Bool bFlag = sal_True ) { bHTMLMode = bFlag; } sal_Bool IsHTMLMode() const { return bHTMLMode; } void SetHeadInBrowse( sal_Bool bFlag = sal_True ) { bHeadInBrowse = bFlag; } sal_Bool IsHeadInBrowse() const { return bHeadInBrowse; } void SetFootInBrowse( sal_Bool bFlag = sal_True ) { bFootInBrowse = bFlag; } sal_Bool IsFootInBrowse() const { return bFootInBrowse; } void SetFrmBeepEnabled( sal_Bool bFlag = sal_True ) { bFrmBeepEnabled = bFlag; } sal_Bool IsFrmBeepEnabled() const { return bFrmBeepEnabled; } void SetGlobalDoc( sal_Bool bFlag = sal_True ) { bIsGlobalDoc = bFlag; } sal_Bool IsGlobalDoc() const { return bIsGlobalDoc; } void SetGlblDocSaveLinks( sal_Bool bFlag=sal_True ) { bGlblDocSaveLinks = bFlag; } sal_Bool IsGlblDocSaveLinks() const { return bGlblDocSaveLinks; } void SetLabelDoc( sal_Bool bFlag = sal_True ) { bIsLabelDoc = bFlag; } sal_Bool IsLabelDoc() const { return bIsLabelDoc; } sal_uInt16 GetLinkUpdMode() const; void SetLinkUpdMode( sal_uInt16 nMode ) { nLinkUpdMode = nMode; } // nur fuer den Writer, weil dieser das richtige Enum schreiben muss! sal_uInt16 _GetLinkUpdMode() const { return nLinkUpdMode; } sal_uInt16 GetLatin_CJK() const { return nLatin_CJK; } sal_uInt16 GetLatin_CTL() const { return nLatin_CTL; } sal_uInt16 GetCJK_CTL() const { return nCJK_CTL; } inline sal_Bool IsInDtor() const { return bDtor; } // SS fuer das Drawing, Model und LayerId's const SdrModel* GetDrawModel() const { return pDrawModel; } SdrModel* GetDrawModel() { return pDrawModel; } sal_Int8 GetHeavenId() const { return nHeaven; } sal_Int8 GetHellId() const { return nHell; } sal_Int8 GetControlsId() const { return nControls; } // liefert zu allen fliegenden Rahmen die Position im Dokument. // Wird ein Pam-Pointer uebergeben, muessen die absatzgebundenen // FlyFrames von der ::com::sun::star::awt::Selection vollstaendig umschlossen sein // ( Start < Pos < End ) !!! // (wird fuer die Writer benoetigt) void GetAllFlyFmts( SwPosFlyFrms& rPosFlyFmts, const SwPaM* = 0, sal_Bool bDrawAlso = sal_False ) const; // dokumentglobale Macros sal_Bool HasGlobalMacro(sal_uInt16 nEvent) const; const SvxMacro& GetGlobalMacro(sal_uInt16 nEvent) const; void SetGlobalMacro(sal_uInt16 nEvent, const SvxMacro&); sal_Bool DelGlobalMacro(sal_uInt16 nEvent); const SvxMacroTableDtor& GetMacroTable() const { return *pMacroTable; } // Fussnoten Informationen const SwFtnInfo& GetFtnInfo() const { return *pFtnInfo; } void SetFtnInfo(const SwFtnInfo& rInfo); const SwEndNoteInfo& GetEndNoteInfo() const { return *pEndNoteInfo; } void SetEndNoteInfo(const SwEndNoteInfo& rInfo); // Zeilennummerierung const SwLineNumberInfo& GetLineNumberInfo() const { return *pLineNumberInfo; } void SetLineNumberInfo(const SwLineNumberInfo& rInfo); SwFtnIdxs& GetFtnIdxs() { return *pFtnIdxs; } const SwFtnIdxs& GetFtnIdxs() const { return *pFtnIdxs; } // Fussnoten im Bereich aendern sal_Bool SetCurFtn( const SwPaM& rPam, const String& rNumStr, sal_uInt16 nNumber, sal_Bool bIsEndNote ); // wegen swrtf.cxx und define private public, jetzt hier SwFlyFrmFmt *MakeFlyFrmFmt (const String &rFmtName, SwFrmFmt *pDerivedFrom); SwDrawFrmFmt *MakeDrawFrmFmt(const String &rFmtName, SwFrmFmt *pDerivedFrom); SwLayouter* GetLayouter() { return pLayouter; } const SwLayouter* GetLayouter() const { return pLayouter; } void SetLayouter( SwLayouter* pNew ) { pLayouter = pNew; } ::com::sun::star::uno::Reference< ::com::sun::star::uno::XInterface > Spell( SwPaM&, ::com::sun::star::uno::Reference< ::com::sun::star::linguistic2::XSpellChecker1 > &, sal_uInt16* pPageCnt, sal_uInt16* pPageSt ) const; ::com::sun::star::uno::Reference< ::com::sun::star::linguistic2::XHyphenatedWord > Hyphenate( SwPaM *pPam, const Point &rCrsrPos, sal_uInt16* pPageCnt, sal_uInt16* pPageSt ); const SwBookmarks& GetBookmarks() const { return *pBookmarkTbl; } SwBookmark* MakeBookmark( const SwPaM& rPaM, const KeyCode&, const String& rName, const String& rShortName, BOOKMARK_TYPE eMark = BOOKMARK); void DelBookmark( sal_uInt16 nPos ); void DelBookmark( const String& rName ); sal_uInt16 FindBookmark( const String& rName ); // erzeugt einen eindeutigen Namen. Der Name selbst muss vorgegeben // werden, es wird dann bei gleichen Namen nur durchnumeriert. void MakeUniqueBookmarkName( String& rNm ); // Anzahl der ::com::sun::star::text::Bookmarks, gfs. nur "echte" sal_uInt16 GetBookmarkCnt(sal_Bool bBkmrk = sal_False) const; SwBookmark& GetBookmark( sal_uInt16, sal_Bool bBkmrk = sal_False); // Textbaustein Dokument? void SetGlossDoc( sal_Bool bGlssDc = sal_True ) { bGlossDoc = bGlssDc; } sal_Bool IsGlossDoc() const { return bGlossDoc; } sal_Bool IsInsOnlyTextGlossary() const { return bInsOnlyTxtGlssry; } //Bei Formataenderungen muss das zu Fuss gerufen werden! void SetModified(); void ResetModified(); sal_Bool IsModified() const { return bModified; } //Dokumentaenderungen? sal_Bool IsInCallModified() const { return bInCallModified; } void SetUndoNoResetModified() { nUndoSavePos = USHRT_MAX; } sal_Bool IsUndoNoResetModified() const { return USHRT_MAX == nUndoSavePos; } //Die neuen (hoffentlich bestaendigen) Schnittstellen fuer alles, //was mit dem Layout zu tun hat. SwFrmFmt *MakeLayoutFmt( RndStdIds eRequest, SwFrmFmt* = 0, const SfxItemSet* pSet = 0 ); // JP 08.05.98: fuer Flys muss jetzt diese Schnittstelle benutzt // werden. pAnchorPos muss gesetzt sein, wenn keine // Seitenbindung vorliegt UND der ::com::sun::star::chaos::Anchor nicht schon // im FlySet/FrmFmt mit gueltiger CntntPos gesetzt ist SwFlyFrmFmt* MakeFlySection( RndStdIds eAnchorType, const SwPosition* pAnchorPos, const SfxItemSet* pSet = 0, SwFrmFmt *pParent = 0 ); SwFlyFrmFmt* MakeFlyAndMove( const SwPaM& rPam, const SfxItemSet& rSet, const SwSelBoxes* pSelBoxes = 0, SwFrmFmt *pParent = 0 ); void DelLayoutFmt( SwFrmFmt *pFmt ); SwFrmFmt *CopyLayoutFmt( const SwFrmFmt& rSrc, const SwFmtAnchor& rNewAnchor, sal_Bool bSetTxtFlyAtt = sal_True, sal_Bool bMakeFrms = sal_True ); void CopyWithFlyInFly( const SwNodeRange& rRg, const SwNodeIndex& rInsPos, sal_Bool bMakeNewFrms = sal_True, sal_Bool bDelRedlines = sal_True, sal_Bool bCopyFlyAtFly = sal_False ) const; sal_Bool IsInHeaderFooter( const SwNodeIndex& rIdx ) const; sal_Bool SetFlyFrmAttr( SwFrmFmt& rFlyFmt, SfxItemSet& rSet ); sal_Bool SetFrmFmtToFly( SwFrmFmt& rFlyFmt, SwFrmFmt& rNewFmt, SfxItemSet* pSet = 0, sal_Bool bKeepOrient = sal_False ); // Abstakt fuellen void Summary( SwDoc* pExtDoc, sal_uInt8 nLevel, sal_uInt8 nPara, sal_Bool bImpress ); /* Verwaltet SwDoc::nLinkCt, sollte (paarig!) von allen benutzt werden, * die einen Pointer auf dieses Dokument halten, denn wenn Remove() 0 * liefert, wird das Dokument zerstoert! Oder anders: Jeder bei dem * Remove() 0 liefert, muss das Dokument zerstoeren. */ sal_Int8 AddLink() { return nLinkCt++; } sal_Int8 RemoveLink() { return nLinkCt ? --nLinkCt : nLinkCt; } sal_Int8 GetLinkCnt() const { return nLinkCt; } // UndoHistory am Dokument pflegen // bei Save, SaveAs, Create wird UndoHistory zurueckgesetzt ??? void DoUndo(sal_Bool bUn = sal_True) { bUndo = bUn; } sal_Bool DoesUndo() const { return bUndo; } // Zusammenfassen von Kontinuierlichen Insert/Delete/Overwrite von // Charaktern. Default ist ::com::sun::star::sdbcx::Group-Undo. void DoGroupUndo(sal_Bool bUn = sal_True) { bGroupUndo = bUn; } sal_Bool DoesGroupUndo() const { return bGroupUndo; } // macht rueckgaengig: // 0 letzte Aktion, sonst Aktionen bis zum Start der Klammerung nUndoId // In rUndoRange wird der restaurierte Bereich gesetzt. sal_Bool Undo( SwUndoIter& ); // setzt Undoklammerung auf, nUndoId kommt von der UI-Seite sal_uInt16 StartUndo( sal_uInt16 nUndoId = 0 ); // schliesst Klammerung der nUndoId sal_uInt16 EndUndo( sal_uInt16 nUndoId = 0 ); // loescht die gesamten UndoObjecte ( fuer Methoden die am Nodes // Array drehen ohne entsprechendes Undo !!) void DelAllUndoObj(); // liefert die Id der letzten undofaehigen Aktion zurueck // oder USHRT_MAX // fuellt ggf. VARARR mit ::com::sun::star::sdbcx::User-UndoIds sal_uInt16 GetUndoIds( String* pStr = 0, SwUndoIds *pUndoIds = 0) const; // gibt es Klammerung mit der Id? sal_Bool HasUndoId(sal_uInt16 nId) const; // die drei folgenden Methoden werden beim Undo und nur dort // benoetigt. Sollten sonst nicht aufgerufen werden. const SwNodes* GetUndoNds() const { return &aUndoNodes; } // bei einstufigem Undo muss die History und das Undo-Array geloescht // werden. Dabei ist aber zu beachten, das nur vollstaendige Gruppen // geloescht werden koennen. // Sind beide FLAGS auf sal_False, kann erfragt werden, ob sich in der // History eine offene Gruppe befindet. ( return = sal_True ) // bDelHisory = sal_True: loesche die Undo-History // bDelUndoNds = sal_True: loesche das Undo-Nodes-Arary sal_Bool DelUndoGroups( sal_Bool bDelUndoNds=sal_True, sal_Bool bDelHistory=sal_True ); SwUndo* RemoveLastUndo( sal_uInt16 nUndoId ); // abfragen/setzen der Anzahl von wiederherstellbaren Undo-Actions static sal_uInt16 GetUndoActionCount() { return nUndoActions; } static void SetUndoActionCount( sal_uInt16 nNew ) { nUndoActions = nNew; } // Redo // wiederholt sal_Bool Redo( SwUndoIter& ); // liefert die Id der letzten Redofaehigen Aktion zurueck // fuellt ggf. VARARR mit RedoIds sal_uInt16 GetRedoIds( String* pStr = 0, SwUndoIds *pRedoIds = 0) const; // Repeat // wiederholt sal_Bool Repeat( SwUndoIter&, sal_uInt16 nRepeatCnt = 1 ); // liefert die Id der letzten Repeatfaehigen Aktion zurueck // fuellt ggf. VARARR mit RedoIds sal_uInt16 GetRepeatIds( String* pStr = 0, SwUndoIds *pRedoIds = 0) const; /* Felder */ const SwFldTypes *GetFldTypes() const { return pFldTypes; } SwFieldType *InsertFldType(const SwFieldType &); SwFieldType *GetSysFldType( const sal_uInt16 eWhich ) const; SwFieldType* GetFldType(sal_uInt16 nResId, const String& rName) const; void RemoveFldType(sal_uInt16 nFld); void UpdateFlds( SfxPoolItem* pNewHt = 0, sal_Bool bCloseDB = sal_False ); void InsDeletedFldType( SwFieldType & ); sal_Bool RenameUserFields(const String& rOldName, const String& rNewName); // rufe das Update der Expression Felder auf; alle Ausdruecke werden // neu berechnet. void UpdateRefFlds( SfxPoolItem* pHt = 0); void UpdateTblFlds( SfxPoolItem* pHt = 0); void UpdateExpFlds( SwTxtFld* pFld = 0, sal_Bool bUpdateRefFlds = sal_True ); void UpdateUsrFlds(); void UpdatePageFlds( SfxPoolItem* ); void LockExpFlds() { ++nLockExpFld; } void UnlockExpFlds() { if( nLockExpFld ) --nLockExpFld; } sal_Bool IsExpFldsLocked() const { return 0 != nLockExpFld; } SwDocUpdtFld& GetUpdtFlds() const { return *pUpdtFlds; } sal_Bool SetFieldsDirty( sal_Bool b, const SwNode* pChk = 0, sal_uInt32 nLen = 0 ); void SetFixFields( sal_Bool bOnlyTimeDate = sal_False, const DateTime* pNewDateTime = 0 ); sal_uInt16 GetFldUpdateFlags() const; void SetFldUpdateFlags( sal_uInt16 eMode ) { nFldUpdMode = eMode; } // nur fuer den Writer, weil dieser das richtige Enum schreiben muss! sal_uInt16 _GetFldUpdateFlags() const { return nFldUpdMode; } void ChangeAuthorityData(const SwAuthEntry* pNewData); // Zustaende ueber Ladezustand // frueher DocInfo // sal_Bool IsPageNums() const { return bPageNums; } sal_Bool IsLoaded() const { return bLoaded; } sal_Bool IsUpdateExpFld() const { return bUpdateExpFld; } sal_Bool IsNewDoc() const { return bNewDoc; } void SetPageNums(sal_Bool b = sal_True) { bPageNums = b; } void SetNewDoc(sal_Bool b = sal_True) { bNewDoc = b; } void SetUpdateExpFldStat(sal_Bool b = sal_True) { bUpdateExpFld = b; } void SetLoaded(sal_Bool b = sal_True) { bLoaded = b; } // Setze im Calculator alle SetExpresion Felder, die bis zur // angegebenen Position (Node [ + ::com::sun::star::ucb::Content]) gueltig sind. Es kann // eine erzeugte Liste aller Felder mit uebergegeben werden. // (ist die Adresse != 0, und der Pointer == 0 wird eine neue // Liste returnt.) void FldsToCalc( SwCalc& rCalc, sal_uInt32 nLastNd = ULONG_MAX, sal_uInt16 nLastCntnt = USHRT_MAX ); void FldsToCalc( SwCalc& rCalc, const _SetGetExpFld& rToThisFld ); void FldsToExpand( SwHash**& ppTbl, sal_uInt16& rTblSize, const _SetGetExpFld& rToThisFld ); sal_Bool IsNewFldLst() const { return bNewFldLst; } void SetNewFldLst( sal_Bool bFlag = sal_True ) { bNewFldLst = bFlag; } void InsDelFldInFldLst( sal_Bool bIns, const SwTxtFld& rFld ); /* Datenbank && DB-Manager */ void SetNewDBMgr( SwNewDBMgr* pNewMgr ) { pNewDBMgr = pNewMgr; } SwNewDBMgr* GetNewDBMgr() const { return pNewDBMgr; } void ChangeDBFields( const SvStringsDtor& rOldNames, const String& rNewName ); void SetInitDBFields(sal_Bool b); // Von Feldern verwendete Datenbanken herausfinden void GetAllUsedDB( SvStringsDtor& rDBNameList, const SvStringsDtor* pAllDBNames = 0 ); void ChgDBName( const String& rNewName ); String GetDBName(); const String& GetDBDesc(); const String& _GetDBDesc() const { return aDBName; } // Kopieren eines Bereiches im oder in ein anderes Dokument ! // Die Position kann auch im Bereich liegen !! sal_Bool Copy( SwPaM&, SwPosition& ) const; // in ndcopy.cxx // Loesche die Section, in der der Node steht. void DeleteSection( SwNode *pNode ); sal_Bool Delete( SwPaM& ); //loeschen eines Bereiches sal_Bool DelFullPara( SwPaM& ); //loeschen gesamter Absaetze sal_Bool DeleteAndJoin( SwPaM& ); //komplett loeschen eines Bereiches sal_Bool Move( SwPaM&, SwPosition&, SwMoveFlags = DOC_MOVEDEFAULT ); //verschieben eines Bereiches sal_Bool Move( SwNodeRange&, SwNodeIndex&, SwMoveFlags = DOC_MOVEDEFAULT ); // verschieben ganzer Nodes sal_Bool MoveAndJoin( SwPaM&, SwPosition&, SwMoveFlags = DOC_MOVEDEFAULT ); //verschieben eines Bereiches //Ueberschreiben eines einzelnen Zeichens. rRg.Start() bezeichnet //den Node und die Position in dem Node, an der eingefuegt wird, sal_Bool Overwrite( const SwPaM &rRg, sal_Unicode c ); //Ueberschreiben eines Strings in einem bestehenden Textnode. sal_Bool Overwrite(const SwPaM &rRg, const String& rStr ); //Einfuegen eines einzelnen Zeichens. rRg.Start() bezeichnet //den Node und die Position in dem Node, an der eingefuegt wird. sal_Bool Insert(const SwPaM &rRg, sal_Unicode c ); //Einfuegen eines Strings in einen bestehenden //Textnode. Der Text wird kopiert. sal_Bool Insert( const SwPaM &rRg, const String &, sal_Bool bHintExpand = sal_True ); // change text to Upper/Lower/Hiragana/Katagana/... void TransliterateText( const SwPaM& rPaM, utl::TransliterationWrapper& ); //Einfuegen einer Grafik, Formel. Die XXXX werden kopiert. SwFlyFrmFmt* Insert(const SwPaM &rRg, const String& rGrfName, const String& rFltName, const Graphic* pGraphic = 0, const SfxItemSet* pFlyAttrSet = 0, const SfxItemSet* pGrfAttrSet = 0, SwFrmFmt* = 0 ); SwFlyFrmFmt* Insert(const SwPaM &rRg, const GraphicObject& rGrfObj, const SfxItemSet* pFlyAttrSet = 0, const SfxItemSet* pGrfAttrSet = 0, SwFrmFmt* = 0 ); // austauschen einer Grafik (mit Undo) void ReRead( SwPaM&, const String& rGrfName, const String& rFltName, const Graphic* pGraphic, const GraphicObject* pGrfObj ); //Einfuegen eines DrawObjectes. Das Object muss bereits im DrawModel // angemeldet sein. SwDrawFrmFmt* Insert( const SwPaM &rRg, SdrObject& rDrawObj, const SfxItemSet* pFlyAttrSet = 0, SwFrmFmt* = 0 ); String GetUniqueGrfName() const; //Einfuegen von OLE-Objecten. SwFlyFrmFmt* Insert( const SwPaM &rRg, SvInPlaceObject *, const SfxItemSet* pFlyAttrSet = 0, const SfxItemSet* pGrfAttrSet = 0, SwFrmFmt* = 0 ); SwFlyFrmFmt* InsertOLE( const SwPaM &rRg, String& rObjName, const SfxItemSet* pFlyAttrSet = 0, const SfxItemSet* pGrfAttrSet = 0, SwFrmFmt* = 0 ); String GetUniqueOLEName() const; // ein bischen wa fuer die benannten FlyFrames String GetUniqueFrameName() const; void SetFlyName( SwFlyFrmFmt& rFmt, const String& rName ); const SwFlyFrmFmt* FindFlyByName( const String& rName, sal_Int8 nNdTyp = 0 ) const; void GetGrfNms( const SwFlyFrmFmt& rFmt, String* pGrfName, String* pFltName ) const; // setze bei allen Flys ohne Namen einen gueltigen (Wird von den Readern // nach dem Einlesen gerufen ) void SetAllUniqueFlyNames(); //Aufspalten eines Nodes an rPos (nur fuer den TxtNode implementiert) sal_Bool SplitNode(const SwPosition &rPos, sal_Bool bChkTableStart = sal_False ); sal_Bool AppendTxtNode( SwPosition& rPos ); // nicht const! // Ersetz einen selektierten Bereich in einem TextNode mit dem // String. Ist fuers Suchen&Ersetzen gedacht. // bRegExpRplc - ersetze Tabs (\\t) und setze den gefundenen String // ein ( nicht \& ) // z.B.: Fnd: "zzz", Repl: "xx\t\\t..&..\&" // --> "xx\t..zzz..&" sal_Bool Replace( SwPaM& rPam, const String& rNewStr, sal_Bool bRegExpRplc = sal_False ); /* * Einfuegen eines Attributs. Erstreckt sich rRg ueber * mehrere Nodes, wird das Attribut aufgespaltet, sofern * dieses Sinn macht. Nodes, in denen dieses Attribut keinen * Sinn macht, werden ignoriert. In vollstaendig in der * Selektion eingeschlossenen Nodes wird das Attribut zu * harter Formatierung, in den anderen (Text-)Nodes wird das * Attribut in das Attributearray eingefuegt. Bei einem * Zeichenattribut wird ein "leerer" Hint eingefuegt, * wenn keine Selektion * vorliegt; andernfalls wird das Attribut als harte * Formatierung dem durch rRg.Start() bezeichneten Node * hinzugefuegt. Wenn das Attribut nicht eingefuegt werden * konnte, liefert die Methode sal_False. */ sal_Bool Insert( const SwPaM &rRg, const SfxPoolItem&, sal_uInt16 nFlags = 0 ); sal_Bool Insert( const SwPaM &rRg, const SfxItemSet&, sal_uInt16 nFlags = 0 ); //Zuruecksetzen der Attribute; es werden alle TxtHints und bei //vollstaendiger Selektion harte Formatierung (AUTO-Formate) entfernt void ResetAttr(const SwPaM &rRg, sal_Bool bTxtAttr = sal_True, const SvUShortsSort* = 0 ); void RstTxtAttr(const SwPaM &rRg, BOOL bInclRefToxMark = FALSE ); // Setze das Attribut im angegebenen Format. Ist Undo aktiv, wird // das alte in die Undo-History aufgenommen void SetAttr( const SfxPoolItem&, SwFmt& ); void SetAttr( const SfxItemSet&, SwFmt& ); // Setze das Attribut als neues default Attribut in diesem Dokument. // Ist Undo aktiv, wird das alte in die Undo-History aufgenommen void SetDefault( const SfxPoolItem& ); void SetDefault( const SfxItemSet& ); // Erfrage das Default Attribut in diesem Dokument. const SfxPoolItem& GetDefault( sal_uInt16 nFmtHint ) const; // TextAttribute nicht mehr aufspannen lassen sal_Bool DontExpandFmt( const SwPosition& rPos, sal_Bool bFlag = sal_True ); /* Formate */ const SwFrmFmts* GetFrmFmts() const { return pFrmFmtTbl; } SwFrmFmts* GetFrmFmts() { return pFrmFmtTbl; } const SwCharFmts* GetCharFmts() const { return pCharFmtTbl;} /* LayoutFormate (Rahmen, DrawObjecte), mal const mal nicht */ const SwSpzFrmFmts* GetSpzFrmFmts() const { return pSpzFrmFmtTbl; } SwSpzFrmFmts* GetSpzFrmFmts() { return pSpzFrmFmtTbl; } const SwFrmFmt *GetDfltFrmFmt() const { return pDfltFrmFmt; } SwFrmFmt *GetDfltFrmFmt() { return pDfltFrmFmt; } const SwFrmFmt *GetEmptyPageFmt() const { return pEmptyPageFmt; } SwFrmFmt *GetEmptyPageFmt() { return pEmptyPageFmt; } const SwFrmFmt *GetColumnContFmt() const{ return pColumnContFmt; } SwFrmFmt *GetColumnContFmt() { return pColumnContFmt; } const SwCharFmt *GetDfltCharFmt() const { return pDfltCharFmt;} SwCharFmt *GetDfltCharFmt() { return pDfltCharFmt;} SwFrmFmt *MakeFrmFmt(const String &rFmtName, SwFrmFmt *pDerivedFrom); void DelFrmFmt( SwFrmFmt *pFmt ); SwFrmFmt* FindFrmFmtByName( const String& rName ) const { return (SwFrmFmt*)FindFmtByName( (SvPtrarr&)*pFrmFmtTbl, rName ); } SwFrmFmt* FindSpzFrmFmtByName( const String& rName ) const { return (SwFrmFmt*)FindFmtByName( (SvPtrarr&)*pSpzFrmFmtTbl, rName ); } SwCharFmt *MakeCharFmt(const String &rFmtName, SwCharFmt *pDerivedFrom); void DelCharFmt(sal_uInt16 nFmt); void DelCharFmt(SwCharFmt* pFmt); SwCharFmt* FindCharFmtByName( const String& rName ) const { return (SwCharFmt*)FindFmtByName( (SvPtrarr&)*pCharFmtTbl, rName ); } /* Formatcollections (Vorlagen) */ // TXT const SwTxtFmtColl* GetDfltTxtFmtColl() const { return pDfltTxtFmtColl; } const SwTxtFmtColls *GetTxtFmtColls() const { return pTxtFmtCollTbl; } SwTxtFmtColl *MakeTxtFmtColl( const String &rFmtName, SwTxtFmtColl *pDerivedFrom ); SwConditionTxtFmtColl* MakeCondTxtFmtColl( const String &rFmtName, SwTxtFmtColl *pDerivedFrom ); void DelTxtFmtColl(sal_uInt16 nFmt); void DelTxtFmtColl( SwTxtFmtColl* pColl ); sal_Bool SetTxtFmtColl( const SwPaM &rRg, SwTxtFmtColl *pFmt, sal_Bool bReset = sal_True); SwTxtFmtColl* FindTxtFmtCollByName( const String& rName ) const { return (SwTxtFmtColl*)FindFmtByName( (SvPtrarr&)*pTxtFmtCollTbl, rName ); } // GRF const SwGrfFmtColl* GetDfltGrfFmtColl() const { return pDfltGrfFmtColl; } const SwGrfFmtColls *GetGrfFmtColls() const { return pGrfFmtCollTbl; } SwGrfFmtColl *MakeGrfFmtColl(const String &rFmtName, SwGrfFmtColl *pDerivedFrom); void DelGrfFmtColl(sal_uInt16 nFmt); void DelGrfFmtColl( SwGrfFmtColl* pColl ); SwGrfFmtColl* FindGrfFmtCollByName( const String& rName ) const { return (SwGrfFmtColl*)FindFmtByName( (SvPtrarr&)*pGrfFmtCollTbl, rName ); } // Tabellen-Formate const SwFrmFmts* GetTblFrmFmts() const { return pTblFrmFmtTbl; } SwFrmFmts* GetTblFrmFmts() { return pTblFrmFmtTbl; } sal_uInt16 GetTblFrmFmtCount( sal_Bool bUsed ) const; SwFrmFmt& GetTblFrmFmt(sal_uInt16 nFmt, sal_Bool bUsed ) const; SwTableFmt* MakeTblFrmFmt(const String &rFmtName, SwFrmFmt *pDerivedFrom); void DelTblFrmFmt( SwTableFmt* pFmt ); SwTableFmt* FindTblFmtByName( const String& rName, sal_Bool bAll = sal_False ) const; //Rahmenzugriff //iterieren ueber Flys - fuer Basic-Collections sal_uInt16 GetFlyCount(FlyCntType eType = FLYCNTTYPE_ALL) const; SwFrmFmt* GetFlyNum(sal_uInt16 nIdx, FlyCntType eType = FLYCNTTYPE_ALL); // kopiere die Formate in die eigenen Arrays und returne diese SwFrmFmt *CopyFrmFmt ( const SwFrmFmt& ); SwCharFmt *CopyCharFmt( const SwCharFmt& ); SwTxtFmtColl* CopyTxtColl( const SwTxtFmtColl& rColl ); SwGrfFmtColl* CopyGrfColl( const SwGrfFmtColl& rColl ); // ersetze alle Formate mit denen aus rSource void ReplaceStyles( SwDoc& rSource ); // Gebe die "Auto-Collection" mit der Id zurueck. Existiert // sie noch nicht, dann erzuege sie // Ist der String-Pointer definiert, dann erfrage nur die // Beschreibung der Attribute, !! es legt keine Vorlage an !! SwTxtFmtColl* GetTxtCollFromPool( sal_uInt16 nId, String* pDescription = 0, SfxItemPresentation ePres = SFX_ITEM_PRESENTATION_COMPLETE, SfxMapUnit eCoreMetric = SFX_MAPUNIT_TWIP, SfxMapUnit ePresMetric = SFX_MAPUNIT_TWIP ); // return das geforderte automatische Format - Basis-Klasse ! SwFmt* GetFmtFromPool( sal_uInt16 nId, String* pDescription = 0, SfxItemPresentation ePres = SFX_ITEM_PRESENTATION_COMPLETE, SfxMapUnit eCoreMetric = SFX_MAPUNIT_TWIP, SfxMapUnit ePresMetric = SFX_MAPUNIT_TWIP ); // returne das geforderte automatische Format SwFrmFmt* GetFrmFmtFromPool( sal_uInt16 nId, String* pDescription = 0 ) { return (SwFrmFmt*)GetFmtFromPool( nId, pDescription ); } SwCharFmt* GetCharFmtFromPool( sal_uInt16 nId, String* pDescription = 0 ) { return (SwCharFmt*)GetFmtFromPool( nId, pDescription ); } // returne die geforderte automatische Seiten-Vorlage SwPageDesc* GetPageDescFromPool( sal_uInt16 nId, String* pDescription = 0, SfxItemPresentation ePres = SFX_ITEM_PRESENTATION_COMPLETE, SfxMapUnit eCoreMetric = SFX_MAPUNIT_TWIP, SfxMapUnit ePresMetric = SFX_MAPUNIT_TWIP ); SwNumRule* GetNumRuleFromPool( sal_uInt16 nId, String* pDescription = 0, SfxItemPresentation ePres = SFX_ITEM_PRESENTATION_COMPLETE, SfxMapUnit eCoreMetric = SFX_MAPUNIT_TWIP, SfxMapUnit ePresMetric = SFX_MAPUNIT_TWIP ); // pruefe, ob diese "Auto-Collection" in Dokument schon/noch // benutzt wird sal_Bool IsPoolTxtCollUsed( sal_uInt16 nId ) const; sal_Bool IsPoolFmtUsed( sal_uInt16 nId ) const; sal_Bool IsPoolPageDescUsed( sal_uInt16 nId ) const; sal_Bool IsPoolNumRuleUsed( sal_uInt16 nId ) const; // erfrage ob die Absatz-/Zeichen-/Rahmen-/Seiten - Vorlage benutzt wird sal_Bool IsUsed( const SwModify& ) const; sal_Bool IsUsed( const SwNumRule& ) const; // ist der Name ein Pool-Vorlagen-Name, returne seine ID, // sonst USHRT_MAX static sal_uInt16 GetPoolId( const String& rName, SwGetPoolIdFromName ); const SvStringsDtor& GetTextNmArray() const { return pTextNmArray ? *pTextNmArray : *NewTextNmArray(); } const SvStringsDtor& GetListsNmArray() const { return pListsNmArray ? *pListsNmArray : *NewListsNmArray(); } const SvStringsDtor& GetExtraNmArray() const { return pExtraNmArray ? *pExtraNmArray : *NewExtraNmArray(); } const SvStringsDtor& GetRegisterNmArray() const { return pRegisterNmArray ? *pRegisterNmArray : *NewRegisterNmArray(); } const SvStringsDtor& GetDocNmArray() const { return pDocNmArray ? *pDocNmArray : *NewDocNmArray(); } const SvStringsDtor& GetHTMLNmArray() const { return pHTMLNmArray ? *pHTMLNmArray : *NewHTMLNmArray(); } const SvStringsDtor& GetFrmFmtNmArray() const { return pFrmFmtNmArray ? *pFrmFmtNmArray : *NewFrmFmtNmArray(); } const SvStringsDtor& GetChrFmtNmArray() const { return pChrFmtNmArray ? *pChrFmtNmArray : *NewChrFmtNmArray(); } const SvStringsDtor& GetHTMLChrFmtNmArray() const { return pHTMLChrFmtNmArray ? *pHTMLChrFmtNmArray : *NewHTMLChrFmtNmArray(); } const SvStringsDtor& GetPageDescNmArray() const { return pPageDescNmArray ? *pPageDescNmArray : *NewPageDescNmArray(); } const SvStringsDtor& GetNumRuleNmArray() const { return pNumRuleNmArray ? *pNumRuleNmArray : *NewNumRuleNmArray(); } // erfrage zu einer PoolId den Namen (steht im poolfmt.cxx) static String& GetPoolNm( sal_uInt16 nId, String& rFillNm ); // setze den Namen der neu geladenen Dokument-Vorlage sal_uInt16 SetDocPattern( const String& rPatternName ); // gebe die Anzahl von geladenen Dok-VorlagenNamen zurueck. // !! Die nicht mehr benutzten sind 0-Pointer !! sal_uInt16 GetDocPatternCnt() const { return aPatternNms.Count(); } // gebe den Dok-VorlagenNamen zurueck. !!! Kann auch 0 sein !!! String* GetDocPattern( sal_uInt16 nPos ) const { return aPatternNms[nPos]; } // loeche die nicht mehr benutzten Pattern-Namen aus dem Array. // alle nicht mehr referenzierten Namen werden durch 0-Pointer // ersetzt. Diese Positionen koennen wieder vergeben werden. void ReOrgPatternHelpIds(); // Loesche alle nicht referenzierten FeldTypen void GCFieldTypes(); // impl. in docfld.cxx // akt. Dokument mit Textbausteindokument verbinden/erfragen void SetGlossaryDoc( SwDoc* pDoc ) { pGlossaryDoc = pDoc; } SwDoc* GetGlossaryDoc() const { return pGlossaryDoc; } // jetzt mit einem verkappten Reader/Writer/Dokument // travel over PaM Ring sal_Bool InsertGlossary( SwTextBlocks& rBlock, const String& rEntry, SwPaM& rPaM, SwCrsrShell* pShell = 0); String GetCurWord(SwPaM&); // JobSetup und Freunde SfxPrinter* GetPrt( sal_Bool bCreate ) const { if( !bCreate || pPrt ) return pPrt; else return _GetPrt(); } SfxPrinter* GetPrt() const { return pPrt; } inline void _SetPrt( SfxPrinter *pP ) { pPrt = pP; } void SetPrt( SfxPrinter *pP ); const JobSetup* GetJobsetup() const; void SetJobsetup( const JobSetup& rJobSetup ); // Dokument - Info // legt sie auf jedenfall an! const SfxDocumentInfo* GetInfo(); // kann auch 0 sein !!! const SfxDocumentInfo* GetpInfo() const { return pSwgInfo; } // setze ueber die DocShell in den entsp. Storage-Stream. Hier wird // jetzt die DocInfo verwaltet. Fuer die Felder ist am Doc eine Kopie // der Info, um einen schnellen Zugriff zu ermoeglichen. // (impl. in docsh2.cxx) void SetInfo( const SfxDocumentInfo& rInfo ); // die DocInfo hat siche geaendert (Notify ueber die DocShell) // stosse die entsp. Felder zum Updaten an. void DocInfoChgd( const SfxDocumentInfo& rInfo ); // Dokument - Statistics inline const SwDocStat &GetDocStat() const { return *pDocStat; } void SetDocStat( const SwDocStat& rStat ); void UpdateDocStat( SwDocStat& rStat ); //PageDescriptor-Schnittstelle sal_uInt16 GetPageDescCnt() const { return aPageDescs.Count(); } const SwPageDesc& GetPageDesc( sal_uInt16 i ) const { return *aPageDescs[i]; } SwPageDesc* FindPageDescByName( const String& rName, sal_uInt16* pPos = 0 ) const; // kopiere den gesamten PageDesc - ueber Dokumentgrenzen und "tief"! // optional kann das kopieren der PoolFmtId, -HlpId verhindert werden void CopyPageDesc( const SwPageDesc& rSrcDesc, SwPageDesc& rDstDesc, sal_Bool bCopyPoolIds = sal_True ); // kopiere die Kopzeile (mit dem Inhalt!) aus dem SrcFmt // ins DestFmt ( auch ueber Doc grenzen hinaus!) void CopyHeader( const SwFrmFmt& rSrcFmt, SwFrmFmt& rDestFmt ) { _CopyPageDescHeaderFooter( sal_True, rSrcFmt, rDestFmt ); } // kopiere die Fusszeile (mit dem Inhalt!) aus dem SrcFmt // ins DestFmt ( auch ueber Doc grenzen hinaus!) void CopyFooter( const SwFrmFmt& rSrcFmt, SwFrmFmt& rDestFmt ) { _CopyPageDescHeaderFooter( sal_False, rSrcFmt, rDestFmt ); } //fuer Reader SwPageDesc& _GetPageDesc( sal_uInt16 i ) const { return *aPageDescs[i]; } void ChgPageDesc( sal_uInt16 i, const SwPageDesc& ); void DelPageDesc( sal_uInt16 i ); sal_uInt16 MakePageDesc( const String &rName, const SwPageDesc* pCpy = 0 ); // Methoden fuer die Verzeichnisse: // - Verzeichnismarke einfuegen loeschen travel sal_uInt16 GetCurTOXMark( const SwPosition& rPos, SwTOXMarks& ) const; void Delete( SwTOXMark* pTOXMark ); const SwTOXMark& GotoTOXMark( const SwTOXMark& rCurTOXMark, SwTOXSearch eDir, sal_Bool bInReadOnly ); // - Verzeichnis einfuegen, und bei Bedarf erneuern const SwTOXBaseSection* InsertTableOf( const SwPosition& rPos, const SwTOXBase& rTOX, const SfxItemSet* pSet = 0, sal_Bool bExpand = sal_False ); const SwTOXBaseSection* InsertTableOf( sal_uInt32 nSttNd, sal_uInt32 nEndNd, const SwTOXBase& rTOX, const SfxItemSet* pSet = 0 ); const SwTOXBase* GetCurTOX( const SwPosition& rPos ) const; const SwAttrSet& GetTOXBaseAttrSet(const SwTOXBase& rTOX) const; sal_Bool DeleteTOX( const SwTOXBase& rTOXBase, sal_Bool bDelNodes = sal_False ); String GetUniqueTOXBaseName( const SwTOXType& rType, const String* pChkStr = 0 ) const; sal_Bool SetTOXBaseName(const SwTOXBase& rTOXBase, const String& rName); void SetTOXBaseProtection(const SwTOXBase& rTOXBase, sal_Bool bProtect); // nach einlesen einer Datei alle Verzeichnisse updaten void SetUpdateTOX( sal_Bool bFlag = sal_True ) { bUpdateTOX = bFlag; } sal_Bool IsUpdateTOX() const { return bUpdateTOX; } const String& GetTOIAutoMarkURL() const {return sTOIAutoMarkURL;} void SetTOIAutoMarkURL(const String& rSet) {sTOIAutoMarkURL = rSet;} void ApplyAutoMark(); sal_Bool IsInReading() const { return bInReading; } // - Verzeichnis-Typen verwalten sal_uInt16 GetTOXTypeCount( TOXTypes eTyp ) const; const SwTOXType* GetTOXType( TOXTypes eTyp, sal_uInt16 nId ) const; sal_Bool DeleteTOXType( TOXTypes eTyp, sal_uInt16 nId ); const SwTOXType* InsertTOXType( const SwTOXType& rTyp ); const SwTOXTypes& GetTOXTypes() const { return *pTOXTypes; } const SwTOXBase* GetDefaultTOXBase( TOXTypes eTyp, sal_Bool bCreate = sal_False ); void SetDefaultTOXBase(const SwTOXBase& rBase); // - Schluessel fuer die Indexverwaltung sal_uInt16 GetTOIKeys( SwTOIKeyType eTyp, SvStringsSort& rArr ) const; // Sortieren Tabellen Text sal_Bool SortTbl(const SwSelBoxes& rBoxes, const SwSortOptions&); sal_Bool SortText(const SwPaM&, const SwSortOptions&); // korrigiere die im Dokument angemeldeten SwPosition-Objecte, // wie z.B. die ::com::sun::star::text::Bookmarks oder die Verzeichnisse. // JP 22.06.95: ist bMoveCrsr gesetzt, verschiebe auch die Crsr // Setzt alles in rOldNode auf rNewPos + Offset void CorrAbs( const SwNodeIndex& rOldNode, const SwPosition& rNewPos, const xub_StrLen nOffset = 0, sal_Bool bMoveCrsr = sal_False ); // Setzt alles im Bereich von [rStartNode, rEndNode] nach rNewPos void CorrAbs( const SwNodeIndex& rStartNode, const SwNodeIndex& rEndNode, const SwPosition& rNewPos, sal_Bool bMoveCrsr = sal_False ); // Setzt alles im Bereich von rRange nach rNewPos void CorrAbs( const SwPaM& rRange, const SwPosition& rNewPos, sal_Bool bMoveCrsr = sal_False ); // Setzt alles in rOldNode auf relative Pos void CorrRel( const SwNodeIndex& rOldNode, const SwPosition& rNewPos, const xub_StrLen nOffset = 0, sal_Bool bMoveCrsr = sal_False ); // GliederungsRegeln erfragen / setzen const SwNumRule* GetOutlineNumRule() const { return pOutlineRule; } void SetOutlineNumRule( const SwNumRule& rRule ); // Gliederung - hoch-/runterstufen sal_Bool OutlineUpDown( const SwPaM& rPam, short nOffset = 1 ); // Gliederung - hoch-/runtermoven sal_Bool MoveOutlinePara( const SwPaM& rPam, short nOffset = 1); // zu diesem Gliederungspunkt sal_Bool GotoOutline( SwPosition& rPos, const String& rName ) const; // die Aenderungen an den Gliederungsvorlagen in die OutlineRule uebernehmen void SetOutlineLSpace( sal_uInt8 nLevel, short nFirstLnOfst, sal_uInt16 nLSpace ); // setzt, wenn noch keine Numerierung, sonst wird geaendert // arbeitet mit alten und neuen Regeln, nur Differenzen aktualisieren void SetNumRule( const SwPaM&, const SwNumRule&, sal_Bool bSetAbsLSpace = sal_True ); // ab hier neu starten lassen oder den Start wieder aufheben void SetNumRuleStart( const SwPosition& rPos, sal_Bool bFlag = sal_True ); void SetNodeNumStart( const SwPosition& rPos, sal_uInt16 nStt = USHRT_MAX ); SwNumRule* GetCurrNumRule( const SwPosition& rPos ) const; SwNumRuleTbl& GetNumRuleTbl() { return *pNumRuleTbl; } const SwNumRuleTbl& GetNumRuleTbl() const { return *pNumRuleTbl; } sal_uInt16 MakeNumRule( const String &rName, const SwNumRule* pCpy = 0 ); sal_uInt16 FindNumRule( const String& rName ) const; SwNumRule* FindNumRulePtr( const String& rName ) const; // loeschen geht nur, wenn die ::com::sun::star::chaos::Rule niemand benutzt! sal_Bool DelNumRule( const String& rName ); String GetUniqueNumRuleName( const String* pChkStr = 0, sal_Bool bAutoNum = sal_True ) const; void UpdateNumRule( const String& rName, sal_uInt32 nUpdPos ); void UpdateNumRule(); // alle invaliden Updaten void ChgNumRuleFmts( const SwNumRule& rRule ); sal_Bool ReplaceNumRule( const SwPosition& rPos, const String& rOldRule, const String& rNewRule ); // zum naechsten/vorhergehenden Punkt auf gleicher Ebene sal_Bool GotoNextNum( SwPosition&, sal_Bool bOverUpper = sal_True, sal_uInt8* pUpper = 0, sal_uInt8* pLower = 0 ); sal_Bool GotoPrevNum( SwPosition&, sal_Bool bOverUpper = sal_True, sal_uInt8* pUpper = 0, sal_uInt8* pLower = 0 ); // Absaetze ohne Numerierung, aber mit Einzuegen sal_Bool NoNum( const SwPaM& ); // Loeschen, Splitten der Aufzaehlungsliste sal_Bool DelNumRules( const SwPaM& ); // Hoch-/Runterstufen sal_Bool NumUpDown( const SwPaM&, sal_Bool bDown = sal_True ); // Bewegt selektierte Absaetze (nicht nur Numerierungen) // entsprechend des Offsets. (negativ: zum Doc-Anf.) sal_Bool MoveParagraph( const SwPaM&, long nOffset = 1, sal_Bool bIsOutlMv = sal_False ); // No-/Numerierung ueber Delete/Backspace ein/abschalten sal_Bool NumOrNoNum( const SwNodeIndex& rIdx, sal_Bool bDel = sal_False, sal_Bool bOutline = sal_False ); // Animation der Grafiken stoppen void StopNumRuleAnimations( OutputDevice* ); // fuege eine neue Tabelle auf der Position rPos ein. (es // wird vor dem Node eingefuegt !!) //JP 28.10.96: // fuer AutoFormat bei der Eingabe: dann muessen die Spalten // auf die vordefinierten Breite gesetzt werden. Im Array stehen die // Positionen der Spalten!! (nicht deren Breite!) const SwTable* InsertTable( const SwPosition& rPos, sal_uInt16 nRows, sal_uInt16 nCols, SwHoriOrient eAdjust, sal_uInt16 nInsert = HEADLINE_NO_BORDER, const SwTableAutoFmt* pTAFmt = 0, const SvUShorts* pColArr = 0 ); // steht der Index in einer Tabelle, dann returne den TableNode sonst 0 SwTableNode* IsIdxInTbl( const SwNodeIndex& rIdx ); inline const SwTableNode* IsIdxInTbl( const SwNodeIndex& rIdx ) const; // erzeuge aus dem makierten Bereich eine ausgeglichene Tabelle const SwTable* TextToTable( const SwPaM& rRange, sal_Unicode cCh, SwHoriOrient eAdjust, sal_uInt16 nInsert = HEADLINE_NO_BORDER, const SwTableAutoFmt* = 0 ); // erzeuge aus der Tabelle wieder normalen Text sal_Bool TableToText( const SwTableNode* pTblNd, sal_Unicode cCh ); // einfuegen von Spalten/Zeilen in der Tabelle sal_Bool InsertCol( const SwCursor& rCursor, sal_uInt16 nCnt = 1, sal_Bool bBehind = sal_True ); sal_Bool InsertCol( const SwSelBoxes& rBoxes, sal_uInt16 nCnt = 1, sal_Bool bBehind = sal_True ); sal_Bool InsertRow( const SwCursor& rCursor, sal_uInt16 nCnt = 1, sal_Bool bBehind = sal_True ); sal_Bool InsertRow( const SwSelBoxes& rBoxes, sal_uInt16 nCnt = 1, sal_Bool bBehind = sal_True ); // loeschen von Spalten/Zeilen in der Tabelle sal_Bool DeleteRowCol( const SwSelBoxes& rBoxes ); sal_Bool DeleteRow( const SwCursor& rCursor ); sal_Bool DeleteCol( const SwCursor& rCursor ); // teilen / zusammenfassen von Boxen in der Tabelle sal_Bool SplitTbl( const SwSelBoxes& rBoxes, sal_Bool bVert = sal_True, sal_uInt16 nCnt=1 ); // returnt den enum TableMergeErr sal_uInt16 MergeTbl( SwPaM& rPam ); String GetUniqueTblName() const; sal_Bool IsInsTblFormatNum() const; sal_Bool IsInsTblChangeNumFormat() const; sal_Bool IsInsTblAlignNum() const; // aus der FEShell wg.. Undo und bModified void GetTabCols( SwTabCols &rFill, const SwCursor* pCrsr, const SwCellFrm* pBoxFrm = 0 ) const; void SetTabCols( const SwTabCols &rNew, sal_Bool bCurRowOnly, const SwCursor* pCrsr, const SwCellFrm* pBoxFrm = 0 ); // Direktzugriff fuer Uno void SetTabCols(SwTable& rTab, const SwTabCols &rNew, SwTabCols &rOld, const SwTableBox *pStart, sal_Bool bCurRowOnly); void SetHeadlineRepeat( SwTable &rTable, sal_Bool bSet ); // AutoFormat fuer die Tabelle/TabellenSelection sal_Bool SetTableAutoFmt( const SwSelBoxes& rBoxes, const SwTableAutoFmt& rNew ); // Erfrage wie attributiert ist sal_Bool GetTableAutoFmt( const SwSelBoxes& rBoxes, SwTableAutoFmt& rGet ); // setze das TabelleAttribut Undo auf: void AppendUndoForAttrTable( const SwTable& rTbl ); // setze die Spalten/Zeilen/ZTellen Breite/Hoehe sal_Bool SetColRowWidthHeight( SwTableBox& rAktBox, sal_uInt16 eType, SwTwips nAbsDiff, SwTwips nRelDiff ); SwTableBoxFmt* MakeTableBoxFmt(); SwTableLineFmt* MakeTableLineFmt(); // teste ob die Box ein numerischen Wert darstellt und aender dann ggfs. // das Format der Box void ChkBoxNumFmt( SwTableBox& rAktBox, sal_Bool bCallUpdate ); void SetTblBoxFormulaAttrs( SwTableBox& rBox, const SfxItemSet& rSet ); void ClearBoxNumAttrs( const SwNodeIndex& rNode ); sal_Bool CopyTblInTbl( const SwTable& rSrcTable, SwTable& rDestTbl, const SwNodeIndex& rBoxIdx ); sal_Bool InsCopyOfTbl( SwPosition& rInsPos, const SwSelBoxes& rBoxes, const SwTable* pCpyTbl = 0, sal_Bool bCpyName = sal_False, sal_Bool bCorrPos = sal_False ); sal_Bool UnProtectCells( const String& rTblName ); sal_Bool UnProtectCells( const SwSelBoxes& rBoxes ); sal_Bool UnProtectTbls( const SwPaM& rPam ); sal_Bool HasTblAnyProtection( const SwPosition* pPos, const String* pTblName = 0, sal_Bool* pFullTblProtection = 0 ); // Tabelle an der Position in der GrundLine aufsplitten, sprich eine // neue Tabelle erzeugen. sal_Bool SplitTable( const SwPosition& rPos, sal_uInt16 eMode = 0, sal_Bool bCalcNewSize = sal_False ); // und die Umkehrung davon. rPos muss in der Tabelle stehen, die bestehen // bleibt. Das Flag besagt ob die aktuelle mit der davor oder dahinter // stehenden vereint wird. sal_Bool MergeTable( const SwPosition& rPos, sal_Bool bWithPrev = sal_True, sal_uInt16 nMode = 0 ); // Raeume die Umrandung innerhalb der Tabelle ein wenig auf (doppelte // an einer Kante erkennen und beseitigen) sal_Bool GCTableBorder( const SwPosition& rPos ); // Charts der angegebenen Tabelle zum Update bewegen void UpdateCharts( const String &rName ) const; // update all charts, for that exists any table void UpdateAllCharts() { DoUpdateAllCharts( 0 ); } // Tabelle wird umbenannt und aktualisiert die Charts void SetTableName( SwFrmFmt& rTblFmt, const String &rNewName ); // returne zum Namen die im Doc gesetzte Referenz const SwFmtRefMark* GetRefMark( const String& rName ) const; // returne die RefMark per Index - fuer Uno const SwFmtRefMark* GetRefMark( sal_uInt16 nIndex ) const; // returne die Namen aller im Doc gesetzten Referenzen. // Ist der ArrayPointer 0 dann returne nur, ob im Doc. eine RefMark // gesetzt ist sal_uInt16 GetRefMarks( SvStringsDtor* = 0 ) const; //Einfuegen einer Beschriftung - falls ein FlyFormat erzeugt wird, so // returne dieses. SwFlyFrmFmt* InsertLabel( const SwLabelType eType, const String &rTxt, const sal_Bool bBefore, const sal_uInt16 nId, const sal_uInt32 nIdx, const sal_Bool bCpyBrd = sal_True ); SwFlyFrmFmt* InsertDrawLabel( const String &rTxt, const sal_uInt16 nId, SdrObject& rObj ); // erfrage den Attribut Pool const SwAttrPool& GetAttrPool() const { return aAttrPool; } SwAttrPool& GetAttrPool() { return aAttrPool; } // suche ueber das Layout eine EditShell und ggfs. eine ViewShell SwEditShell* GetEditShell( ViewShell** ppSh = 0 ) const; // OLE 2.0-Benachrichtung inline void SetOle2Link(const Link& rLink) {aOle2Link = rLink;} inline const Link& GetOle2Link() const {return aOle2Link;} // SS fuer Bereiche SwSection* Insert( const SwPaM& rRange, const SwSection& rNew, const SfxItemSet* pAttr = 0, sal_Bool bUpdate = sal_True ); sal_uInt16 IsInsRegionAvailable( const SwPaM& rRange, const SwNode** ppSttNd = 0 ) const; SwSection* GetCurrSection( const SwPosition& rPos ) const; SwSectionFmts& GetSections() { return *pSectionFmtTbl; } const SwSectionFmts& GetSections() const { return *pSectionFmtTbl; } SwSectionFmt *MakeSectionFmt( SwSectionFmt *pDerivedFrom ); void DelSectionFmt( SwSectionFmt *pFmt, sal_Bool bDelNodes = sal_False ); void ChgSection( sal_uInt16 nSect, const SwSection&, const SfxItemSet* = 0, sal_Bool bPreventLinkUpdate = FALSE); String GetUniqueSectionName( const String* pChkStr = 0 ) const; // Passwort fuer geschuetzte Bereiche erfragen/setzen void ChgSectionPasswd( const String& sNew ); const String& GetSectionPasswd() const { return sSectionPasswd; } // Pointer auf die SfxDocShell vom Doc, kann 0 sein !!! SwDocShell* GetDocShell() { return pDocShell; } const SwDocShell* GetDocShell() const { return pDocShell; } void SetDocShell( SwDocShell* pDSh ); // falls beim Kopieren von OLE-Nodes eine DocShell angelegt werden muss, // dann MUSS der Ref-Pointer besetzt sein!!!! SvEmbeddedObjectRef* GetRefForDocShell() { return pDocShRef; } void SetRefForDocShell( SvEmbeddedObjectRef* p ) { pDocShRef = p; } // fuer die TextBausteine - diese habe nur ein SvPersist zur // Verfuegung SvPersist* GetPersist() const; void SetPersist( SvPersist* ); // Pointer auf den Storage des SfxDocShells, kann 0 sein !!! SvStorage* GetDocStorage(); // abfrage/setze Flag, ob das Dokument im asynchronen Laden ist sal_Bool IsInLoadAsynchron() const { return bInLoadAsynchron; } void SetInLoadAsynchron( sal_Bool bFlag ) { bInLoadAsynchron = bFlag; } // SS fuers Linken von Dokumentteilen sal_Bool GetData( const String& rItem, SvData& rData ) const; sal_Bool ChangeData( const String& rItem, const SvData& rData ); SvPseudoObject* CreateHotLink( const String& rItem ); // erzeuge um das zu Servende Object eine Selektion sal_Bool SelectServerObj( const String& rStr, SwPaM*& rpPam, SwNodeRange*& rpRange ) const; // erfage alle zu servendenen Objecte sal_uInt16 GetServerObjects( SvStrings& rStrArr ) const; // fuer Drag&Move: ( z.B. RefMarks "verschieben" erlauben ) sal_Bool IsCopyIsMove() const { return bCopyIsMove; } void SetCopyIsMove( sal_Bool bFlag ) { bCopyIsMove = bFlag; } // fuers Draw-Undo: Aktionen auf Flys wollen wir selbst behandeln sal_Bool IsNoDrawUndoObj() const { return bNoDrawUndoObj; } void SetNoDrawUndoObj( sal_Bool bFlag ) { bNoDrawUndoObj = bFlag; } SwDrawContact* GroupSelection( SdrView& ); void UnGroupSelection( SdrView& ); sal_Bool DeleteSelection( SwDrawView& ); // Invalidiert OnlineSpell-WrongListen void SpellItAgainSam( sal_Bool bInvalid, sal_Bool bOnlyWrong ); void InvalidateAutoCompleteFlag(); SdrModel* _MakeDrawModel(); inline SdrModel* MakeDrawModel() { return GetDrawModel() ? GetDrawModel() : _MakeDrawModel(); } void SetCalcFieldValueHdl(Outliner* pOutliner); // erfrage ob die ::com::sun::star::util::URL besucht war. Uebers Doc, falls nur ein ::com::sun::star::text::Bookmark // angegeben ist. Dann muss der Doc. Name davor gesetzt werden! sal_Bool IsVisitedURL( const String& rURL ) const; // speicher die akt. Werte fuer die automatische Aufnahme von Ausnahmen // in die Autokorrektur void SetAutoCorrExceptWord( SwAutoCorrExceptWord* pNew ); SwAutoCorrExceptWord* GetAutoCorrExceptWord() { return pACEWord; } const SwFmtINetFmt* FindINetAttr( const String& rName ) const; // rufe ins dunkle Basic, mit evt. Return String sal_Bool ExecMacro( const SvxMacro& rMacro, String* pRet = 0, SbxArray* pArgs = 0 ); // rufe ins dunkle Basic/JavaScript sal_uInt16 CallEvent( sal_uInt16 nEvent, const SwCallMouseEvent& rCallEvent, sal_Bool bChkPtr = sal_False, SbxArray* pArgs = 0, const Link* pCallBack = 0 ); // linken Rand ueber Objectleiste einstellen (aenhlich dem Stufen von // Numerierungen), optional kann man "um" den Offset stufen oder "auf" // die Position gestuft werden (bModulus = sal_True) void MoveLeftMargin( const SwPaM& rPam, sal_Bool bRight = sal_True, sal_Bool bModulus = sal_True ); // Numberformatter erfragen inline SvNumberFormatter* GetNumberFormatter( sal_Bool bCreate = sal_True ); inline const SvNumberFormatter* GetNumberFormatter( sal_Bool bCreate = sal_True ) const; // loesche den nicht sichtbaren ::com::sun::star::ucb::Content aus dem Document, wie z.B.: // versteckte Bereiche, versteckte Absaetze sal_Bool RemoveInvisibleContent(); // embedded alle lokalen Links (Bereiche/Grafiken) sal_Bool EmbedAllLinks(); // erzeuge Anhand der vorgebenen Collection Teildokumente // falls keine angegeben ist, nehme die Kapitelvorlage der 1. Ebene sal_Bool GenerateGlobalDoc( const String& rPath, const SwTxtFmtColl* pSplitColl = 0 ); sal_Bool GenerateHTMLDoc( const String& rPath, const SwTxtFmtColl* pSplitColl = 0 ); // alles fuers Redlining SwRedlineMode GetRedlineMode() const { return eRedlineMode; } sal_Bool IsRedlineOn() const { return ::IsRedlineOn( eRedlineMode ); } sal_Bool IsIgnoreRedline() const { return REDLINE_IGNORE & eRedlineMode; } void SetRedlineMode_intern( sal_uInt16 eMode ) { eRedlineMode = (SwRedlineMode)eMode; } void SetRedlineMode( sal_uInt16 eMode ); const SwRedlineTbl& GetRedlineTbl() const { return *pRedlineTbl; } sal_Bool AppendRedline( SwRedline* pPtr, sal_Bool bCallDelete = sal_True ); sal_Bool SplitRedline( const SwPaM& rPam ); sal_Bool DeleteRedline( const SwPaM& rPam, sal_Bool bSaveInUndo = sal_True, sal_uInt16 nDelType = USHRT_MAX ); sal_Bool DeleteRedline( const SwStartNode& rSection, sal_Bool bSaveInUndo = sal_True, sal_uInt16 nDelType = USHRT_MAX ); void DeleteRedline( sal_uInt16 nPos ); sal_uInt16 GetRedlinePos( const SwNode& rNd, sal_uInt16 nType = USHRT_MAX ) const; void CompressRedlines(); const SwRedline* GetRedline( const SwPosition& rPos, sal_uInt16* pFndPos = 0 ) const; sal_Bool IsRedlineMove() const { return bIsRedlineMove; } void SetRedlineMove( sal_Bool bFlag ) { bIsRedlineMove = bFlag; } sal_Bool AcceptRedline( sal_uInt16 nPos, sal_Bool bCallDelete = sal_True ); sal_Bool AcceptRedline( const SwPaM& rPam, sal_Bool bCallDelete = sal_True ); sal_Bool RejectRedline( sal_uInt16 nPos, sal_Bool bCallDelete = sal_True ); sal_Bool RejectRedline( const SwPaM& rPam, sal_Bool bCallDelete = sal_True ); const SwRedline* SelNextRedline( SwPaM& rPam ) const; const SwRedline* SelPrevRedline( SwPaM& rPam ) const; // alle Redline invalidieren, die Darstellung hat sich geaendert void UpdateRedlineAttr(); // legt gegebenenfalls einen neuen Author an sal_uInt16 GetRedlineAuthor(); // fuer die Reader usw. - neuen Author in die Tabelle eintragen sal_uInt16 InsertRedlineAuthor( const String& ); // Kommentar am Redline an der Position setzen sal_Bool SetRedlineComment( const SwPaM& rPam, const String& rS ); // vergleiche zwei Dokument miteinander long CompareDoc( const SwDoc& rDoc ); // merge zweier Dokumente long MergeDoc( const SwDoc& rDoc ); // setze Kommentar-Text fuers Redline, das dann per AppendRedline // hereinkommt. Wird vom Autoformat benutzt. 0-Pointer setzt den Modus // wieder zurueck. Die SequenceNummer ist fuers UI-seitige zusammen- // fassen von Redlines. void SetAutoFmtRedlineComment( const String* pTxt, sal_uInt16 nSeqNo = 0 ); sal_Bool IsAutoFmtRedline() const { return bIsAutoFmtRedline; } void SetAutoFmtRedline( sal_Bool bFlag ) { bIsAutoFmtRedline = bFlag; } // fuer AutoFormat: mit Undo/Redlining - Behandlung void SetTxtFmtCollByAutoFmt( const SwPosition& rPos, sal_uInt16 nPoolId, const SfxItemSet* pSet = 0 ); void SetFmtItemByAutoFmt( const SwPaM& rPam, const SfxPoolItem& ); // !!!NUR fuer die SW-Textblocks!! beachtet kein LAYOUT!!! void ClearDoc(); // loescht den gesamten Inhalt. // erfrage / setze die Daten fuer die PagePreView const SwPagePreViewPrtData* GetPreViewPrtData() const { return pPgPViewPrtData; } // wenn der Pointer == 0 ist, dann wird im Doc der Pointer zerstoert, // ansonsten wird das Object kopiert. // Der Pointer geht NICHT in den Besitz des Doc's!! void SetPreViewPrtData( const SwPagePreViewPrtData* pData ); // update all modified OLE-Objects. The modification is called over the // StarOne - Interface --> Bug 67026 void SetOLEObjModified() { if( GetRootFrm() ) aOLEModifiedTimer.Start(); } // -------------------- Uno - Schnittstellen --------------------------- const SwUnoCrsrTbl& GetUnoCrsrTbl() const { return *pUnoCrsrTbl; } SwUnoCrsr* CreateUnoCrsr( const SwPosition& rPos, sal_Bool bTblCrsr = sal_False ); // -------------------- Uno - Schnittstellen --------------------------- // -------------------- FeShell - Schnittstellen ----------------------- // !!!!! diese gehen immer davon aus, das ein Layout existiert !!!! sal_Bool ChgAnchor( const SdrMarkList &rMrkList, int eAnchorId, sal_Bool bSameOnly, sal_Bool bPosCorr ); void SetRowHeight( const SwCursor& rCursor, const SwFmtFrmSize &rNew ); void GetRowHeight( const SwCursor& rCursor, SwFmtFrmSize *& rpSz ) const; sal_Bool BalanceRowHeight( const SwCursor& rCursor, sal_Bool bTstOnly = sal_True ); void SetRowBackground( const SwCursor& rCursor, const SvxBrushItem &rNew ); sal_Bool GetRowBackground( const SwCursor& rCursor, SvxBrushItem &rToFill ) const; void SetTabBorders( const SwCursor& rCursor, const SfxItemSet& rSet ); void SetTabLineStyle( const SwCursor& rCursor, const Color* pColor, sal_Bool bSetLine, const SvxBorderLine* pBorderLine ); void GetTabBorders( const SwCursor& rCursor, SfxItemSet& rSet ) const; void SetBoxAttr( const SwCursor& rCursor, const SfxPoolItem &rNew ); sal_Bool GetBoxBackground( const SwCursor& rCursor, SvxBrushItem &rToFill ) const; void SetBoxAlign( const SwCursor& rCursor, sal_uInt16 nAlign ); sal_uInt16 GetBoxAlign( const SwCursor& rCursor ) const; void AdjustCellWidth( const SwCursor& rCursor, sal_Bool bBalance = sal_False ); int Chainable( const SwFrmFmt &rSource, const SwFrmFmt &rDest ); int Chain( SwFrmFmt &rSource, const SwFrmFmt &rDest ); void Unchain( SwFrmFmt &rFmt ); // fuers Copy/Move aus der FrmShell SdrObject* CloneSdrObj( const SdrObject&, sal_Bool bMoveWithinDoc = sal_False, sal_Bool bInsInPage = sal_True ); // // -------------------- FeShell - Schnittstellen Ende ------------------ // Schnittstelle fuer die TextInputDaten - ( fuer die Texteingabe // von japanischen/chinesischen Zeichen) SwExtTextInput* CreateExtTextInput( const SwPaM& rPam ); void DeleteExtTextInput( SwExtTextInput* pDel ); SwExtTextInput* GetExtTextInput( const SwNode& rNd, xub_StrLen nCntntPos = STRING_NOTFOUND) const; // Schnistelle fuer den Zugriff auf die AutoComplete-Liste static SwAutoCompleteWord& GetAutoCompleteWords() { return *pACmpltWords; } sal_Bool ContainsMSVBasic() const { return bContains_MSVBasic; } void SetContainsMSVBasic( sal_Bool bFlag ) { bContains_MSVBasic = bFlag; } // Interface for the forbidden characters of any asian/.. languages const com::sun::star::i18n:: ForbiddenCharacters* GetForbiddenCharacters( ULONG nLang, BOOL bLocaleData ) const; void SetForbiddenCharacters( ULONG nLang, const com::sun::star::i18n::ForbiddenCharacters& ); void ClearForbiddenCharacters( ULONG nLang ); const SwForbiddenCharacterTable* GetForbiddenCharacterTbl() const { return pForbiddenCharsTbl; } // Interface for the list of Ruby - texts/attributes USHORT FillRubyList( const SwPaM& rPam, SwRubyList& rList, USHORT nMode ); USHORT SetRubyList( const SwPaM& rPam, const SwRubyList& rList, USHORT nMode ); // ------------------- Zugriff auf Dummy-Member -------------------- sal_Bool IsParaSpaceMax() const { return n8Dummy1 & DUMMY_PARASPACEMAX; } sal_Bool IsParaSpaceMaxAtPages() const { return n8Dummy1 & DUMMY_PARASPACEMAX_AT_PAGES; } void SetParaSpaceMax( sal_Bool bNew, sal_Bool bAtPages ) { if( bNew ) n8Dummy1 |= DUMMY_PARASPACEMAX; else n8Dummy1 &= ~DUMMY_PARASPACEMAX; if( bAtPages ) n8Dummy1 |= DUMMY_PARASPACEMAX_AT_PAGES; else n8Dummy1 &= ~DUMMY_PARASPACEMAX_AT_PAGES; } void SetULongDummy1( sal_uInt32 n ) { n32Dummy1 = n; } void SetULongDummy2( sal_uInt32 n ) { n32Dummy2 = n; } void SetByteDummy1( sal_Int8 n ) { n8Dummy1 = n; } void SetByteDummy2( sal_Int8 n ) { n8Dummy2 = n; } void SetStringDummy1( const String& r ) { sDummy1 = r; } void SetStringDummy2( const String& r ) { sDummy2 = r; } sal_uInt32 GetULongDummy1() const { return n32Dummy1; } sal_uInt32 GetULongDummy2() const { return n32Dummy2; } sal_Int8 GetByteDummy1() const { return n8Dummy1; } sal_Int8 GetByteDummy2() const { return n8Dummy2; } const String& GetStringDummy1() const { return sDummy1; } const String& GetStringDummy2() const { return sDummy2; } // call back for API wrapper SwModify* GetUnoCallBack() const; }; // Diese Methode wird im Dtor vom SwDoc gerufen und loescht den Cache // der Konturobjekte void ClrContourCache(); //------------------ inline impl. --------------------------------- inline const SwTableNode* SwDoc::IsIdxInTbl( const SwNodeIndex& rIdx ) const { return ((SwDoc*)this)->IsIdxInTbl( rIdx ); } inline SvNumberFormatter* SwDoc::GetNumberFormatter( sal_Bool bCreate ) { if( bCreate && !pNumberFormatter ) _CreateNumberFormatter(); return pNumberFormatter; } inline const SvNumberFormatter* SwDoc::GetNumberFormatter( sal_Bool bCreate ) const { return ((SwDoc*)this)->GetNumberFormatter( bCreate ); } // ist das NodesArray das normale vom Doc? (nicht das UndoNds, .. ) // Implementierung steht hier, weil man dazu Doc kennen muss! inline sal_Bool SwNodes::IsDocNodes() const { return this == &pMyDoc->GetNodes(); } #endif //_DOC_HXX