/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "com/sun/star/document/XStorageBasedDocument.hpp" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "svx/svdglob.hxx" #include "svx/svdstr.hrc" #include #include #include "unomlstr.hxx" #include #include #include #include // #i100710# #include #include #include #include // #i118485# #include #include #include #include using namespace ::rtl; using namespace ::com::sun::star; static uno::Reference < beans::XPropertySet > lcl_getFrame_throw(const SdrOle2Obj* _pObject) { uno::Reference < beans::XPropertySet > xFrame; if ( _pObject ) { uno::Reference< frame::XController> xController = _pObject->GetParentXModel()->getCurrentController(); if ( xController.is() ) { xFrame.set( xController->getFrame(),uno::UNO_QUERY_THROW); } } // if ( _pObject ) return xFrame; } class SdrLightEmbeddedClient_Impl : public ::cppu::WeakImplHelper5 < embed::XStateChangeListener , document::XEventListener , embed::XInplaceClient , embed::XEmbeddedClient , embed::XWindowSupplier > { uno::Reference< awt::XWindow > m_xWindow; SdrOle2Obj* mpObj; Fraction m_aScaleWidth; Fraction m_aScaleHeight; public: SdrLightEmbeddedClient_Impl( SdrOle2Obj* pObj ); void Release(); void SetSizeScale( const Fraction& aScaleWidth, const Fraction& aScaleHeight ) { m_aScaleWidth = aScaleWidth; m_aScaleHeight = aScaleHeight; } Fraction GetScaleWidth() const { return m_aScaleWidth; } Fraction GetScaleHeight() const { return m_aScaleHeight; } void setWindow(const uno::Reference< awt::XWindow >& _xWindow); private: Rectangle impl_getScaledRect_nothrow() const; // XStateChangeListener virtual void SAL_CALL changingState( const ::com::sun::star::lang::EventObject& aEvent, ::sal_Int32 nOldState, ::sal_Int32 nNewState ) throw (::com::sun::star::embed::WrongStateException, ::com::sun::star::uno::RuntimeException); virtual void SAL_CALL stateChanged( const ::com::sun::star::lang::EventObject& aEvent, ::sal_Int32 nOldState, ::sal_Int32 nNewState ) throw (::com::sun::star::uno::RuntimeException); virtual void SAL_CALL disposing( const ::com::sun::star::lang::EventObject& aEvent ) throw (::com::sun::star::uno::RuntimeException); // document::XEventListener virtual void SAL_CALL notifyEvent( const document::EventObject& aEvent ) throw( uno::RuntimeException ); // XEmbeddedClient virtual void SAL_CALL saveObject() throw ( embed::ObjectSaveVetoException, uno::Exception, uno::RuntimeException ); virtual void SAL_CALL visibilityChanged( sal_Bool bVisible ) throw ( embed::WrongStateException, uno::RuntimeException ); // XComponentSupplier virtual uno::Reference< util::XCloseable > SAL_CALL getComponent() throw ( uno::RuntimeException ); // XInplaceClient virtual sal_Bool SAL_CALL canInplaceActivate() throw ( uno::RuntimeException ); virtual void SAL_CALL activatingInplace() throw ( embed::WrongStateException, uno::RuntimeException ); virtual void SAL_CALL activatingUI() throw ( embed::WrongStateException, uno::RuntimeException ); virtual void SAL_CALL deactivatedInplace() throw ( embed::WrongStateException, uno::RuntimeException ); virtual void SAL_CALL deactivatedUI() throw ( embed::WrongStateException, uno::RuntimeException ); virtual uno::Reference< ::com::sun::star::frame::XLayoutManager > SAL_CALL getLayoutManager() throw ( embed::WrongStateException, uno::RuntimeException ); virtual uno::Reference< frame::XDispatchProvider > SAL_CALL getInplaceDispatchProvider() throw ( embed::WrongStateException, uno::RuntimeException ); virtual awt::Rectangle SAL_CALL getPlacement() throw ( embed::WrongStateException, uno::RuntimeException ); virtual awt::Rectangle SAL_CALL getClipRectangle() throw ( embed::WrongStateException, uno::RuntimeException ); virtual void SAL_CALL translateAccelerators( const uno::Sequence< awt::KeyEvent >& aKeys ) throw ( embed::WrongStateException, uno::RuntimeException ); virtual void SAL_CALL scrollObject( const awt::Size& aOffset ) throw ( embed::WrongStateException, uno::RuntimeException ); virtual void SAL_CALL changedPlacement( const awt::Rectangle& aPosRect ) throw ( embed::WrongStateException, uno::Exception, uno::RuntimeException ); // XWindowSupplier virtual uno::Reference< awt::XWindow > SAL_CALL getWindow() throw ( uno::RuntimeException ); }; //-------------------------------------------------------------------- SdrLightEmbeddedClient_Impl::SdrLightEmbeddedClient_Impl( SdrOle2Obj* pObj ) : mpObj( pObj ) { } Rectangle SdrLightEmbeddedClient_Impl::impl_getScaledRect_nothrow() const { Rectangle aLogicRect( mpObj->GetLogicRect() ); // apply scaling to object area and convert to pixels aLogicRect.SetSize( Size( Fraction( aLogicRect.GetWidth() ) * m_aScaleWidth, Fraction( aLogicRect.GetHeight() ) * m_aScaleHeight ) ); return aLogicRect; } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::changingState( const ::com::sun::star::lang::EventObject& /*aEvent*/, ::sal_Int32 /*nOldState*/, ::sal_Int32 /*nNewState*/ ) throw (::com::sun::star::embed::WrongStateException, ::com::sun::star::uno::RuntimeException) { } //-------------------------------------------------------------------- void SdrLightEmbeddedClient_Impl::Release() { { SolarMutexGuard aGuard; mpObj = NULL; } release(); } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::stateChanged( const ::com::sun::star::lang::EventObject& /*aEvent*/, ::sal_Int32 nOldState, ::sal_Int32 nNewState ) throw (::com::sun::star::uno::RuntimeException) { SolarMutexGuard aGuard; if ( mpObj && nOldState == embed::EmbedStates::LOADED && nNewState == embed::EmbedStates::RUNNING ) { mpObj->ObjectLoaded(); GetSdrGlobalData().GetOLEObjCache().InsertObj(mpObj); } else if ( mpObj && nNewState == embed::EmbedStates::LOADED && nOldState == embed::EmbedStates::RUNNING ) { GetSdrGlobalData().GetOLEObjCache().RemoveObj(mpObj); } } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::disposing( const ::com::sun::star::lang::EventObject& /*aEvent*/ ) throw (::com::sun::star::uno::RuntimeException) { SolarMutexGuard aGuard; GetSdrGlobalData().GetOLEObjCache().RemoveObj(mpObj); } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::notifyEvent( const document::EventObject& aEvent ) throw( uno::RuntimeException ) { // TODO/LATER: when writer uses this implementation the code could be shared with SfxInPlaceClient_Impl SolarMutexGuard aGuard; // the code currently makes sense only in case there is no other client if ( mpObj && mpObj->GetAspect() != embed::Aspects::MSOLE_ICON && aEvent.EventName == "OnVisAreaChanged" && mpObj->GetObjRef().is() && mpObj->GetObjRef()->getClientSite() == uno::Reference< embed::XEmbeddedClient >( this ) ) { try { MapUnit aContainerMapUnit( MAP_100TH_MM ); uno::Reference< embed::XVisualObject > xParentVis( mpObj->GetParentXModel(), uno::UNO_QUERY ); if ( xParentVis.is() ) aContainerMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xParentVis->getMapUnit( mpObj->GetAspect() ) ); MapUnit aObjMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( mpObj->GetObjRef()->getMapUnit( mpObj->GetAspect() ) ); Rectangle aVisArea; awt::Size aSz; try { aSz = mpObj->GetObjRef()->getVisualAreaSize( mpObj->GetAspect() ); } catch( embed::NoVisualAreaSizeException& ) { OSL_FAIL( "No visual area size!\n" ); aSz.Width = 5000; aSz.Height = 5000; } catch( uno::Exception& ) { OSL_FAIL( "Unexpected exception!\n" ); aSz.Width = 5000; aSz.Height = 5000; } aVisArea.SetSize( Size( aSz.Width, aSz.Height ) ); aVisArea = OutputDevice::LogicToLogic( aVisArea, aObjMapUnit, aContainerMapUnit ); Size aScaledSize( static_cast< long >( m_aScaleWidth * Fraction( aVisArea.GetWidth() ) ), static_cast< long >( m_aScaleHeight * Fraction( aVisArea.GetHeight() ) ) ); Rectangle aLogicRect( mpObj->GetLogicRect() ); // react to the change if the difference is bigger than one pixel Size aPixelDiff = Application::GetDefaultDevice()->LogicToPixel( Size( aLogicRect.GetWidth() - aScaledSize.Width(), aLogicRect.GetHeight() - aScaledSize.Height() ), aContainerMapUnit ); if( aPixelDiff.Width() || aPixelDiff.Height() ) { mpObj->SetLogicRect( Rectangle( aLogicRect.TopLeft(), aScaledSize ) ); mpObj->BroadcastObjectChange(); } else mpObj->ActionChanged(); } catch( uno::Exception& ) { OSL_FAIL( "Unexpected exception!\n" ); } } } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::saveObject() throw ( embed::ObjectSaveVetoException, uno::Exception, uno::RuntimeException ) { // TODO/LATER: when writer uses this implementation the code could be shared with SfxInPlaceClient_Impl uno::Reference< embed::XCommonEmbedPersist > xPersist; uno::Reference< util::XModifiable > xModifiable; { SolarMutexGuard aGuard; if ( !mpObj ) throw embed::ObjectSaveVetoException(); // the common persistence is supported by objects and links xPersist = uno::Reference< embed::XCommonEmbedPersist >( mpObj->GetObjRef(), uno::UNO_QUERY_THROW ); xModifiable = uno::Reference< util::XModifiable >( mpObj->GetParentXModel(), uno::UNO_QUERY ); } xPersist->storeOwn(); if ( xModifiable.is() ) xModifiable->setModified( sal_True ); } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::visibilityChanged( sal_Bool /*bVisible*/ ) throw ( embed::WrongStateException, uno::RuntimeException ) { // nothing to do currently // TODO/LATER: when writer uses this implementation the code could be shared with SfxInPlaceClient_Impl if ( mpObj ) { Rectangle aLogicRect( mpObj->GetLogicRect() ); Size aLogicSize( aLogicRect.GetWidth(), aLogicRect.GetHeight() ); if( mpObj->IsChart() ) { //charts never should be stretched see #i84323# for example mpObj->SetLogicRect( Rectangle( aLogicRect.TopLeft(), aLogicSize ) ); mpObj->BroadcastObjectChange(); } // if( mpObj->IsChart() ) } } //-------------------------------------------------------------------- uno::Reference< util::XCloseable > SAL_CALL SdrLightEmbeddedClient_Impl::getComponent() throw ( uno::RuntimeException ) { uno::Reference< util::XCloseable > xResult; SolarMutexGuard aGuard; if ( mpObj ) xResult = uno::Reference< util::XCloseable >( mpObj->GetParentXModel(), uno::UNO_QUERY ); return xResult; } // XInplaceClient //-------------------------------------------------------------------- sal_Bool SAL_CALL SdrLightEmbeddedClient_Impl::canInplaceActivate() throw ( uno::RuntimeException ) { sal_Bool bRet = sal_False; SolarMutexGuard aGuard; if ( mpObj ) { uno::Reference< embed::XEmbeddedObject > xObject = mpObj->GetObjRef(); if ( !xObject.is() ) throw uno::RuntimeException(); // we don't want to switch directly from outplace to inplace mode bRet = !( xObject->getCurrentState() == embed::EmbedStates::ACTIVE || mpObj->GetAspect() == embed::Aspects::MSOLE_ICON ); } // if ( mpObj ) return bRet; } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::activatingInplace() throw ( embed::WrongStateException, uno::RuntimeException ) { } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::activatingUI() throw ( embed::WrongStateException, uno::RuntimeException ) { SolarMutexGuard aGuard; uno::Reference < beans::XPropertySet > xFrame( lcl_getFrame_throw(mpObj)); uno::Reference < frame::XFrame > xOwnFrame( xFrame,uno::UNO_QUERY); uno::Reference < frame::XFramesSupplier > xParentFrame( xOwnFrame->getCreator(), uno::UNO_QUERY ); if ( xParentFrame.is() ) xParentFrame->setActiveFrame( xOwnFrame ); OLEObjCache& rObjCache = GetSdrGlobalData().GetOLEObjCache(); const sal_uIntPtr nCount = rObjCache.size(); for(sal_Int32 i = nCount-1 ; i >= 0;--i) { SdrOle2Obj* pObj = rObjCache[i]; if ( pObj != mpObj ) { // only deactivate ole objects which belongs to the same frame if ( xFrame == lcl_getFrame_throw(pObj) ) { uno::Reference< embed::XEmbeddedObject > xObject = pObj->GetObjRef(); try { if ( xObject->getStatus( pObj->GetAspect() ) & embed::EmbedMisc::MS_EMBED_ACTIVATEWHENVISIBLE ) xObject->changeState( embed::EmbedStates::INPLACE_ACTIVE ); else { // the links should not stay in running state for long time because of locking uno::Reference< embed::XLinkageSupport > xLink( xObject, uno::UNO_QUERY ); if ( xLink.is() && xLink->isLink() ) xObject->changeState( embed::EmbedStates::LOADED ); else xObject->changeState( embed::EmbedStates::RUNNING ); } } catch (com::sun::star::uno::Exception& ) {} } } } // for(sal_Int32 i = nCount-1 ; i >= 0;--i) } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::deactivatedInplace() throw ( embed::WrongStateException, uno::RuntimeException ) { } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::deactivatedUI() throw ( embed::WrongStateException, uno::RuntimeException ) { SolarMutexGuard aGuard; com::sun::star::uno::Reference< ::com::sun::star::frame::XLayoutManager > xLayoutManager(getLayoutManager()); if ( xLayoutManager.is() ) { const static OUString aMenuBarURL( "private:resource/menubar/menubar" ); if ( !xLayoutManager->isElementVisible( aMenuBarURL ) ) xLayoutManager->createElement( aMenuBarURL ); } } //-------------------------------------------------------------------- uno::Reference< ::com::sun::star::frame::XLayoutManager > SAL_CALL SdrLightEmbeddedClient_Impl::getLayoutManager() throw ( embed::WrongStateException, uno::RuntimeException ) { uno::Reference< ::com::sun::star::frame::XLayoutManager > xMan; SolarMutexGuard aGuard; uno::Reference < beans::XPropertySet > xFrame( lcl_getFrame_throw(mpObj)); try { xMan.set(xFrame->getPropertyValue("LayoutManager"),uno::UNO_QUERY); } catch ( uno::Exception& ) { throw uno::RuntimeException(); } return xMan; } //-------------------------------------------------------------------- uno::Reference< frame::XDispatchProvider > SAL_CALL SdrLightEmbeddedClient_Impl::getInplaceDispatchProvider() throw ( embed::WrongStateException, uno::RuntimeException ) { SolarMutexGuard aGuard; return uno::Reference < frame::XDispatchProvider >( lcl_getFrame_throw(mpObj), uno::UNO_QUERY_THROW ); } //-------------------------------------------------------------------- awt::Rectangle SAL_CALL SdrLightEmbeddedClient_Impl::getPlacement() throw ( embed::WrongStateException, uno::RuntimeException ) { SolarMutexGuard aGuard; if ( !mpObj ) throw uno::RuntimeException(); Rectangle aLogicRect = impl_getScaledRect_nothrow(); MapUnit aContainerMapUnit( MAP_100TH_MM ); uno::Reference< embed::XVisualObject > xParentVis( mpObj->GetParentXModel(), uno::UNO_QUERY ); if ( xParentVis.is() ) aContainerMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xParentVis->getMapUnit( mpObj->GetAspect() ) ); aLogicRect = Application::GetDefaultDevice()->LogicToPixel(aLogicRect,aContainerMapUnit); return AWTRectangle( aLogicRect ); } //-------------------------------------------------------------------- awt::Rectangle SAL_CALL SdrLightEmbeddedClient_Impl::getClipRectangle() throw ( embed::WrongStateException, uno::RuntimeException ) { return getPlacement(); } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::translateAccelerators( const uno::Sequence< awt::KeyEvent >& /*aKeys*/ ) throw ( embed::WrongStateException, uno::RuntimeException ) { } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::scrollObject( const awt::Size& /*aOffset*/ ) throw ( embed::WrongStateException, uno::RuntimeException ) { } //-------------------------------------------------------------------- void SAL_CALL SdrLightEmbeddedClient_Impl::changedPlacement( const awt::Rectangle& aPosRect ) throw ( embed::WrongStateException, uno::Exception, uno::RuntimeException ) { SolarMutexGuard aGuard; if ( !mpObj ) throw uno::RuntimeException(); uno::Reference< embed::XInplaceObject > xInplace( mpObj->GetObjRef(), uno::UNO_QUERY ); if ( !xInplace.is() ) throw uno::RuntimeException(); // check if the change is at least one pixel in size awt::Rectangle aOldRect = getPlacement(); Rectangle aNewPixelRect = VCLRectangle( aPosRect ); Rectangle aOldPixelRect = VCLRectangle( aOldRect ); if ( aOldPixelRect == aNewPixelRect ) // nothing has changed return; // new scaled object area MapUnit aContainerMapUnit( MAP_100TH_MM ); uno::Reference< embed::XVisualObject > xParentVis( mpObj->GetParentXModel(), uno::UNO_QUERY ); if ( xParentVis.is() ) aContainerMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xParentVis->getMapUnit( mpObj->GetAspect() ) ); Rectangle aNewLogicRect = Application::GetDefaultDevice()->PixelToLogic(aNewPixelRect,aContainerMapUnit); Rectangle aLogicRect = impl_getScaledRect_nothrow(); if ( aNewLogicRect != aLogicRect ) { // the calculation of the object area has not changed the object size // it should be done here then //SfxBooleanFlagGuard aGuard( m_bResizeNoScale, sal_True ); // new size of the object area without scaling Size aNewObjSize( Fraction( aNewLogicRect.GetWidth() ) / m_aScaleWidth, Fraction( aNewLogicRect.GetHeight() ) / m_aScaleHeight ); // now remove scaling from new placement and keep this a the new object area aNewLogicRect.SetSize( aNewObjSize ); // react to the change if the difference is bigger than one pixel Size aPixelDiff = Application::GetDefaultDevice()->LogicToPixel( Size( aLogicRect.GetWidth() - aNewObjSize.Width(), aLogicRect.GetHeight() - aNewObjSize.Height() ), aContainerMapUnit ); if( aPixelDiff.Width() || aPixelDiff.Height() ) { mpObj->SetLogicRect( Rectangle( aLogicRect.TopLeft(), aNewObjSize ) ); mpObj->BroadcastObjectChange(); } else mpObj->ActionChanged(); } } // XWindowSupplier //-------------------------------------------------------------------- uno::Reference< awt::XWindow > SAL_CALL SdrLightEmbeddedClient_Impl::getWindow() throw ( uno::RuntimeException ) { SolarMutexGuard aGuard; uno::Reference< awt::XWindow > xCurrent = m_xWindow; if ( !xCurrent.is() ) { if ( !mpObj ) throw uno::RuntimeException(); uno::Reference< frame::XFrame> xFrame(lcl_getFrame_throw(mpObj),uno::UNO_QUERY_THROW); xCurrent = xFrame->getComponentWindow(); } // if ( !xCurrent.is() ) return xCurrent; } void SdrLightEmbeddedClient_Impl::setWindow(const uno::Reference< awt::XWindow >& _xWindow) { m_xWindow = _xWindow; } //////////////////////////////////////////////////////////////////////////////////////////////////// class SdrEmbedObjectLink : public sfx2::SvBaseLink { SdrOle2Obj* pObj; public: SdrEmbedObjectLink(SdrOle2Obj* pObj); virtual ~SdrEmbedObjectLink(); virtual void Closed(); virtual ::sfx2::SvBaseLink::UpdateResult DataChanged( const OUString& rMimeType, const ::com::sun::star::uno::Any & rValue ); bool Connect() { return GetRealObject() != NULL; } }; // ----------------------------------------------------------------------------- SdrEmbedObjectLink::SdrEmbedObjectLink(SdrOle2Obj* pObject): ::sfx2::SvBaseLink( ::sfx2::LINKUPDATE_ONCALL, SOT_FORMATSTR_ID_SVXB ), pObj(pObject) { SetSynchron( sal_False ); } // ----------------------------------------------------------------------------- SdrEmbedObjectLink::~SdrEmbedObjectLink() { } // ----------------------------------------------------------------------------- ::sfx2::SvBaseLink::UpdateResult SdrEmbedObjectLink::DataChanged( const OUString& /*rMimeType*/, const ::com::sun::star::uno::Any & /*rValue*/ ) { if ( !pObj->UpdateLinkURL_Impl() ) { // the link URL was not changed uno::Reference< embed::XEmbeddedObject > xObject = pObj->GetObjRef(); OSL_ENSURE( xObject.is(), "The object must exist always!\n" ); if ( xObject.is() ) { // let the object reload the link // TODO/LATER: reload call could be used for this case try { sal_Int32 nState = xObject->getCurrentState(); if ( nState != embed::EmbedStates::LOADED ) { // in some cases the linked file probably is not locked so it could be changed xObject->changeState( embed::EmbedStates::LOADED ); xObject->changeState( nState ); } } catch ( uno::Exception& ) { } } } pObj->GetNewReplacement(); pObj->SetChanged(); return SUCCESS; } // ----------------------------------------------------------------------------- void SdrEmbedObjectLink::Closed() { pObj->BreakFileLink_Impl(); SvBaseLink::Closed(); } //////////////////////////////////////////////////////////////////////////////////////////////////// class SdrOle2ObjImpl { public: // TODO/LATER: do we really need this pointer? GraphicObject* pGraphicObject; OUString aPersistName; // name of object in persist SdrLightEmbeddedClient_Impl* pLightClient; // must be registered as client only using AddOwnLightClient() call // New local var to avoid repeated loading if load of OLE2 fails bool mbLoadingOLEObjectFailed; bool mbConnected; SdrEmbedObjectLink* mpObjectLink; OUString maLinkURL; SdrOle2ObjImpl() : pGraphicObject( NULL ) , pLightClient ( NULL ) // init to start situation, loading did not fail , mbLoadingOLEObjectFailed( false ) , mbConnected( false ) , mpObjectLink( NULL ) { } }; //////////////////////////////////////////////////////////////////////////////////////////////////// // Predicate determining whether the given OLE is an internal math // object static bool ImplIsMathObj( const uno::Reference < embed::XEmbeddedObject >& rObjRef ) { if ( !rObjRef.is() ) return false; SvGlobalName aClassName( rObjRef->getClassID() ); if( aClassName == SvGlobalName(SO3_SM_CLASSID_30) || aClassName == SvGlobalName(SO3_SM_CLASSID_40) || aClassName == SvGlobalName(SO3_SM_CLASSID_50) || aClassName == SvGlobalName(SO3_SM_CLASSID_60) || aClassName == SvGlobalName(SO3_SM_CLASSID) ) { return true; } else { return false; } } ////////////////////////////////////////////////////////////////////////////// // BaseProperties section sdr::properties::BaseProperties* SdrOle2Obj::CreateObjectSpecificProperties() { return new sdr::properties::OleProperties(*this); } ////////////////////////////////////////////////////////////////////////////// // DrawContact section sdr::contact::ViewContact* SdrOle2Obj::CreateObjectSpecificViewContact() { return new sdr::contact::ViewContactOfSdrOle2Obj(*this); } // ----------------------------------------------------------------------------- TYPEINIT1(SdrOle2Obj,SdrRectObj); DBG_NAME(SdrOle2Obj) SdrOle2Obj::SdrOle2Obj(bool bFrame_) : m_bTypeAsked(false) ,m_bChart(false) { DBG_CTOR( SdrOle2Obj,NULL); bInDestruction = false; mbSuppressSetVisAreaSize = false; Init(); bFrame=bFrame_; } // ----------------------------------------------------------------------------- SdrOle2Obj::SdrOle2Obj( const svt::EmbeddedObjectRef& rNewObjRef, const OUString& rNewObjName, const Rectangle& rNewRect, bool bFrame_) : SdrRectObj(rNewRect) , xObjRef( rNewObjRef ) , m_bTypeAsked(false) , m_bChart(false) { DBG_CTOR( SdrOle2Obj,NULL); bInDestruction = false; mbSuppressSetVisAreaSize = false; Init(); mpImpl->aPersistName = rNewObjName; bFrame=bFrame_; if ( xObjRef.is() && (xObjRef->getStatus( GetAspect() ) & embed::EmbedMisc::EMBED_NEVERRESIZE ) ) SetResizeProtect(sal_True); // For math objects, set closed state to transparent SetClosedObj(!ImplIsMathObj( xObjRef.GetObject() )); } // ----------------------------------------------------------------------------- void SdrOle2Obj::Init() { mpImpl = new SdrOle2ObjImpl; pModifyListener = NULL; pGraphic=NULL; mpImpl->pGraphicObject=NULL; mpImpl->pLightClient = 0; xObjRef.Lock( sal_True ); } // ----------------------------------------------------------------------------- OUString SdrOle2Obj::GetStyleString() { OUString strStyle; if( xObjRef.is() && xObjRef.IsChart() ) { strStyle = xObjRef.GetChartType(); } return strStyle; } // ----------------------------------------------------------------------------- SdrOle2Obj::~SdrOle2Obj() { DBG_DTOR( SdrOle2Obj,NULL); bInDestruction = true; if ( mpImpl->mbConnected ) Disconnect(); delete pGraphic; delete mpImpl->pGraphicObject; if(pModifyListener) { pModifyListener->invalidate(); pModifyListener->release(); } DisconnectFileLink_Impl(); if ( mpImpl->pLightClient ) { mpImpl->pLightClient->Release(); mpImpl->pLightClient = NULL; } delete mpImpl; } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetAspect( sal_Int64 nAspect ) { xObjRef.SetViewAspect( nAspect ); } // ----------------------------------------------------------------------------- bool SdrOle2Obj::isInplaceActive() const { return xObjRef.is() && embed::EmbedStates::INPLACE_ACTIVE == xObjRef->getCurrentState(); } // ----------------------------------------------------------------------------- bool SdrOle2Obj::isUiActive() const { return xObjRef.is() && embed::EmbedStates::UI_ACTIVE == xObjRef->getCurrentState(); } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetGraphic_Impl(const Graphic* pGrf) { if ( pGraphic ) { delete pGraphic; pGraphic = NULL; delete mpImpl->pGraphicObject; mpImpl->pGraphicObject = NULL; } if (pGrf!=NULL) { pGraphic = new Graphic(*pGrf); mpImpl->pGraphicObject = new GraphicObject( *pGraphic ); } SetChanged(); BroadcastObjectChange(); } void SdrOle2Obj::SetGraphic(const Graphic* pGrf) { // only for setting a preview graphic SetGraphic_Impl( pGrf ); } // ----------------------------------------------------------------------------- bool SdrOle2Obj::IsEmpty() const { return !(xObjRef.is()); } // ----------------------------------------------------------------------------- void SdrOle2Obj::Connect() { if( IsEmptyPresObj() ) return; if( mpImpl->mbConnected ) { // currently there are situations where it seems to be unavoidable to have multiple connects // changing this would need a larger code rewrite, so for now I remove the assertion // OSL_FAIL("Connect() called on connected object!"); return; } Connect_Impl(); AddListeners_Impl(); } // ----------------------------------------------------------------------------- sal_Bool SdrOle2Obj::UpdateLinkURL_Impl() { sal_Bool bResult = sal_False; if ( mpImpl->mpObjectLink ) { sfx2::LinkManager* pLinkManager = pModel ? pModel->GetLinkManager() : NULL; if ( pLinkManager ) { OUString aNewLinkURL; pLinkManager->GetDisplayNames( mpImpl->mpObjectLink, 0, &aNewLinkURL, 0, 0 ); if ( !aNewLinkURL.equalsIgnoreAsciiCase( mpImpl->maLinkURL ) ) { const_cast(this)->GetObjRef_Impl(); uno::Reference< embed::XCommonEmbedPersist > xPersObj( xObjRef.GetObject(), uno::UNO_QUERY ); OSL_ENSURE( xPersObj.is(), "The object must exist!\n" ); if ( xPersObj.is() ) { try { sal_Int32 nCurState = xObjRef->getCurrentState(); if ( nCurState != embed::EmbedStates::LOADED ) xObjRef->changeState( embed::EmbedStates::LOADED ); // TODO/LATER: there should be possible to get current mediadescriptor settings from the object uno::Sequence< beans::PropertyValue > aArgs( 1 ); aArgs[0].Name = "URL"; aArgs[0].Value <<= OUString( aNewLinkURL ); xPersObj->reload( aArgs, uno::Sequence< beans::PropertyValue >() ); mpImpl->maLinkURL = aNewLinkURL; bResult = sal_True; if ( nCurState != embed::EmbedStates::LOADED ) xObjRef->changeState( nCurState ); } catch( ::com::sun::star::uno::Exception& ) { OSL_FAIL( OString(OString("SdrOle2Obj::UpdateLinkURL_Impl(), " "exception caught: ") + OUStringToOString( comphelper::anyToString( cppu::getCaughtException() ), RTL_TEXTENCODING_UTF8 )).getStr() ); } } if ( !bResult ) { // TODO/LATER: return the old name to the link manager, is it possible? } } } } return bResult; } // ----------------------------------------------------------------------------- void SdrOle2Obj::BreakFileLink_Impl() { uno::Reference xDoc; if ( pModel ) xDoc.set( pModel->getUnoModel(),uno::UNO_QUERY); if ( xDoc.is() ) { uno::Reference< embed::XStorage > xStorage = xDoc->getDocumentStorage(); if ( xStorage.is() ) { try { uno::Reference< embed::XLinkageSupport > xLinkSupport( xObjRef.GetObject(), uno::UNO_QUERY_THROW ); xLinkSupport->breakLink( xStorage, mpImpl->aPersistName ); DisconnectFileLink_Impl(); mpImpl->maLinkURL = ""; } catch( ::com::sun::star::uno::Exception& ) { OSL_FAIL( OString(OString("SdrOle2Obj::BreakFileLink_Impl(), " "exception caught: ") + OUStringToOString( comphelper::anyToString( cppu::getCaughtException() ), RTL_TEXTENCODING_UTF8 )).getStr() ); } } } } // ----------------------------------------------------------------------------- void SdrOle2Obj::DisconnectFileLink_Impl() { sfx2::LinkManager* pLinkManager = pModel ? pModel->GetLinkManager() : NULL; if ( pLinkManager && mpImpl->mpObjectLink ) { pLinkManager->Remove( mpImpl->mpObjectLink ); mpImpl->mpObjectLink = NULL; } } // ----------------------------------------------------------------------------- void SdrOle2Obj::CheckFileLink_Impl() { if ( pModel && xObjRef.GetObject().is() && !mpImpl->mpObjectLink ) { try { uno::Reference< embed::XLinkageSupport > xLinkSupport( xObjRef.GetObject(), uno::UNO_QUERY ); if ( xLinkSupport.is() && xLinkSupport->isLink() ) { OUString aLinkURL = xLinkSupport->getLinkURL(); if ( !aLinkURL.isEmpty() ) { // this is a file link so the model link manager should handle it sfx2::LinkManager* pLinkManager = pModel->GetLinkManager(); if ( pLinkManager ) { mpImpl->mpObjectLink = new SdrEmbedObjectLink( this ); mpImpl->maLinkURL = aLinkURL; pLinkManager->InsertFileLink( *mpImpl->mpObjectLink, OBJECT_CLIENT_OLE, aLinkURL, NULL, NULL ); mpImpl->mpObjectLink->Connect(); } } } } catch( ::com::sun::star::uno::Exception& ) { OSL_FAIL( OString(OString("SdrOle2Obj::CheckFileLink_Impl(), " "exception caught: ") + OUStringToOString( comphelper::anyToString( cppu::getCaughtException() ), RTL_TEXTENCODING_UTF8 )).getStr() ); } } } // ----------------------------------------------------------------------------- void SdrOle2Obj::Reconnect_Impl() { DBG_ASSERT( mpImpl->mbConnected, "Assigned unconnected object?!" ); Connect_Impl(); } void SdrOle2Obj::Connect_Impl() { if( pModel && !mpImpl->aPersistName.isEmpty() ) { try { ::comphelper::IEmbeddedHelper* pPers = pModel->GetPersist(); if ( pPers ) { comphelper::EmbeddedObjectContainer& rContainer = pPers->getEmbeddedObjectContainer(); if ( !rContainer.HasEmbeddedObject( mpImpl->aPersistName ) || ( xObjRef.is() && !rContainer.HasEmbeddedObject( xObjRef.GetObject() ) ) ) { // object not known to container document // No object -> disaster! DBG_ASSERT( xObjRef.is(), "No object in connect!"); if ( xObjRef.is() ) { // object came from the outside, now add it to the container OUString aTmp; rContainer.InsertEmbeddedObject( xObjRef.GetObject(), aTmp ); mpImpl->aPersistName = aTmp; } } else if ( !xObjRef.is() ) { xObjRef.Assign( rContainer.GetEmbeddedObject( mpImpl->aPersistName ), xObjRef.GetViewAspect() ); m_bTypeAsked = false; } if ( xObjRef.GetObject().is() ) { xObjRef.AssignToContainer( &rContainer, mpImpl->aPersistName ); mpImpl->mbConnected = true; xObjRef.Lock( sal_True ); } } if ( xObjRef.is() ) { if ( !mpImpl->pLightClient ) { mpImpl->pLightClient = new SdrLightEmbeddedClient_Impl( this ); mpImpl->pLightClient->acquire(); } xObjRef->addStateChangeListener( mpImpl->pLightClient ); xObjRef->addEventListener( uno::Reference< document::XEventListener >( mpImpl->pLightClient ) ); if ( xObjRef->getCurrentState() != embed::EmbedStates::LOADED ) GetSdrGlobalData().GetOLEObjCache().InsertObj(this); CheckFileLink_Impl(); uno::Reference< container::XChild > xChild( xObjRef.GetObject(), uno::UNO_QUERY ); if( xChild.is() ) { uno::Reference< uno::XInterface > xParent( pModel->getUnoModel()); if( xParent.is()) xChild->setParent( pModel->getUnoModel() ); } } } catch( ::com::sun::star::uno::Exception& ) { OSL_FAIL( OString(OString("SdrOle2Obj::Connect_Impl(), " "exception caught: ") + OUStringToOString( comphelper::anyToString( cppu::getCaughtException() ), RTL_TEXTENCODING_UTF8 )).getStr() ); } } //TODO/LATER: wait for definition of MiscStatus RESIZEONPRINTERCHANGE //if ( xObjRef.is() && (*ppObjRef)->GetMiscStatus() & SVOBJ_MISCSTATUS_RESIZEONPRINTERCHANGE ) { //TODO/LATER: needs a new handling for OnPrinterChanged /* if (pModel && pModel->GetRefDevice() && pModel->GetRefDevice()->GetOutDevType() == OUTDEV_PRINTER) { // Kein RefDevice oder RefDevice kein Printer sal_Bool bModified = (*ppObjRef)->IsModified(); Printer* pPrinter = (Printer*) pModel->GetRefDevice(); (*ppObjRef)->OnDocumentPrinterChanged( pPrinter ); (*ppObjRef)->SetModified( bModified ); }*/ } } void SdrOle2Obj::ObjectLoaded() { AddListeners_Impl(); } void SdrOle2Obj::AddListeners_Impl() { if( xObjRef.is() && xObjRef->getCurrentState() != embed::EmbedStates::LOADED ) { // register modify listener if( !pModifyListener ) { ((SdrOle2Obj*)this)->pModifyListener = new SvxUnoShapeModifyListener( (SdrOle2Obj*)this ); pModifyListener->acquire(); } uno::Reference< util::XModifyBroadcaster > xBC( getXModel(), uno::UNO_QUERY ); if( xBC.is() && pModifyListener ) { uno::Reference< util::XModifyListener > xListener( pModifyListener ); xBC->addModifyListener( xListener ); } } } // ----------------------------------------------------------------------------- void SdrOle2Obj::Disconnect() { if( IsEmptyPresObj() ) return; if( !mpImpl->mbConnected ) { OSL_FAIL("Disconnect() called on disconnected object!"); return; } RemoveListeners_Impl(); Disconnect_Impl(); } void SdrOle2Obj::RemoveListeners_Impl() { if( xObjRef.is() && !mpImpl->aPersistName.isEmpty() ) { try { sal_Int32 nState = xObjRef->getCurrentState(); if ( nState != embed::EmbedStates::LOADED ) { uno::Reference< util::XModifyBroadcaster > xBC( getXModel(), uno::UNO_QUERY ); if( xBC.is() && pModifyListener ) { uno::Reference< util::XModifyListener > xListener( pModifyListener ); xBC->removeModifyListener( xListener ); } } } catch( ::com::sun::star::uno::Exception& ) { OSL_FAIL( OString(OString("SdrOle2Obj::RemoveListeners_Impl(), " "exception caught: ") + OUStringToOString( comphelper::anyToString( cppu::getCaughtException() ), RTL_TEXTENCODING_UTF8 )).getStr() ); } } } void SdrOle2Obj::Disconnect_Impl() { try { if ( pModel && !mpImpl->aPersistName.isEmpty() ) { if( pModel->IsInDestruction() ) { // TODO/LATER: here we must assume that the destruction of the model is enough to make clear that we will not // remove the object from the container, even if the DrawingObject itself is not destroyed (unfortunately this // There is no real need to do the following removing of the object from the container // in case the model has correct persistence, but in case of problems such a removing // would make the behavior of the office more stable comphelper::EmbeddedObjectContainer* pContainer = xObjRef.GetContainer(); if ( pContainer ) { pContainer->CloseEmbeddedObject( xObjRef.GetObject() ); xObjRef.AssignToContainer( NULL, mpImpl->aPersistName ); } // happens later than the destruction of the model, so we can't assert that). //DBG_ASSERT( bInDestruction, "Model is destroyed, but not me?!" ); //TODO/LATER: should be make sure that the ObjectShell also forgets the object, because we will close it soon? /* uno::Reference < util::XCloseable > xClose( xObjRef, uno::UNO_QUERY ); if ( xClose.is() ) { try { xClose->close( sal_True ); } catch ( util::CloseVetoException& ) { // there's still someone who needs the object! } } xObjRef = NULL;*/ } else if ( xObjRef.is() ) { if ( pModel->getUnoModel().is() ) { // remove object, but don't close it (that's up to someone else) comphelper::EmbeddedObjectContainer* pContainer = xObjRef.GetContainer(); if ( pContainer ) { pContainer->RemoveEmbeddedObject( xObjRef.GetObject(), sal_False); // TODO/LATER: mpImpl->aPersistName contains outdated information, to keep it updated // it should be returned from RemoveEmbeddedObject call. Currently it is no problem, // since no container is adjusted, actually the empty string could be provided as a name here xObjRef.AssignToContainer( NULL, mpImpl->aPersistName ); } DisconnectFileLink_Impl(); } } } if ( xObjRef.is() && mpImpl->pLightClient ) { xObjRef->removeStateChangeListener ( mpImpl->pLightClient ); xObjRef->removeEventListener( uno::Reference< document::XEventListener >( mpImpl->pLightClient ) ); xObjRef->setClientSite( NULL ); GetSdrGlobalData().GetOLEObjCache().RemoveObj(this); } } catch( ::com::sun::star::uno::Exception& ) { OSL_FAIL( OString(OString("SdrOle2Obj::Disconnect_Impl(), " "exception caught: ") + OUStringToOString( comphelper::anyToString( cppu::getCaughtException() ), RTL_TEXTENCODING_UTF8 )).getStr() ); } mpImpl->mbConnected = false; } // ----------------------------------------------------------------------------- SdrObject* SdrOle2Obj::createSdrGrafObjReplacement(bool bAddText, bool /* bUseHCGraphic */) const { const Graphic* pOLEGraphic = GetGraphic(); if(pOLEGraphic) { // #i118485# allow creating a SdrGrafObj representation SdrGrafObj* pClone = new SdrGrafObj(*pOLEGraphic); pClone->SetModel(GetModel()); // copy transformation basegfx::B2DHomMatrix aMatrix; basegfx::B2DPolyPolygon aPolyPolygon; TRGetBaseGeometry(aMatrix, aPolyPolygon); pClone->TRSetBaseGeometry(aMatrix, aPolyPolygon); // copy all attributes to support graphic styles for OLEs pClone->SetStyleSheet(GetStyleSheet(), false); pClone->SetMergedItemSet(GetMergedItemSet()); if(bAddText) { // #i118485# copy text (Caution! Model needed, as guaranteed in aw080) OutlinerParaObject* pOPO = GetOutlinerParaObject(); if(pOPO && GetModel()) { pClone->NbcSetOutlinerParaObject(new OutlinerParaObject(*pOPO)); } } return pClone; } else { // #i100710# pOLEGraphic may be zero (no visualisation available), // so we need to use the OLE replacement graphic SdrRectObj* pClone = new SdrRectObj(GetSnapRect()); pClone->SetModel(GetModel()); // gray outline pClone->SetMergedItem(XLineStyleItem(XLINE_SOLID)); const svtools::ColorConfig aColorConfig; const svtools::ColorConfigValue aColor(aColorConfig.GetColorValue(svtools::OBJECTBOUNDARIES)); pClone->SetMergedItem(XLineColorItem(OUString(), aColor.nColor)); // bitmap fill pClone->SetMergedItem(XFillStyleItem(XFILL_BITMAP)); pClone->SetMergedItem(XFillBitmapItem(OUString(), GetEmptyOLEReplacementGraphic())); pClone->SetMergedItem(XFillBmpTileItem(false)); pClone->SetMergedItem(XFillBmpStretchItem(false)); return pClone; } } SdrObject* SdrOle2Obj::DoConvertToPolyObj(sal_Bool bBezier, bool bAddText) const { // #i118485# missing converter added if(GetModel()) { SdrObject* pRetval = createSdrGrafObjReplacement(true, false); if(pRetval) { SdrObject* pRetval2 = pRetval->DoConvertToPolyObj(bBezier, bAddText); SdrObject::Free(pRetval); return pRetval2; } } return 0; } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetModel(SdrModel* pNewModel) { ::comphelper::IEmbeddedHelper* pDestPers = pNewModel ? pNewModel->GetPersist() : 0; ::comphelper::IEmbeddedHelper* pSrcPers = pModel ? pModel->GetPersist() : 0; if ( pNewModel == pModel ) { // don't know if this is necessary or if it will ever happen, but who knows?! SdrRectObj::SetModel( pNewModel ); return; } // assignment to model has changed DBG_ASSERT( pSrcPers || !mpImpl->mbConnected, "Connected object without a model?!" ); DBG_ASSERT( pDestPers, "The destination model must have a persistence! Please submit an issue!" ); DBG_ASSERT( pDestPers != pSrcPers, "The source and the destination models should have different persistences! Problems are possible!" ); // this is a bug if the target model has no persistence // no error handling is possible so just do nothing in this method if ( !pDestPers ) return; RemoveListeners_Impl(); if( pDestPers && pSrcPers && !IsEmptyPresObj() ) { try { // move the object's storage; ObjectRef remains the same, but PersistName may change OUString aTmp; comphelper::EmbeddedObjectContainer& rContainer = pSrcPers->getEmbeddedObjectContainer(); uno::Reference < embed::XEmbeddedObject > xObj = rContainer.GetEmbeddedObject( mpImpl->aPersistName ); DBG_ASSERT( !xObjRef.is() || xObjRef.GetObject() == xObj, "Wrong object identity!" ); if ( xObj.is() ) { pDestPers->getEmbeddedObjectContainer().MoveEmbeddedObject( rContainer, xObj, aTmp ); mpImpl->aPersistName = aTmp; xObjRef.AssignToContainer( &pDestPers->getEmbeddedObjectContainer(), aTmp ); } DBG_ASSERT( !aTmp.isEmpty(), "Copying embedded object failed!" ); } catch( ::com::sun::star::uno::Exception& ) { OSL_FAIL( OString(OString("SdrOle2Obj::SetModel(), " "exception caught: ") + OUStringToOString( comphelper::anyToString( cppu::getCaughtException() ), RTL_TEXTENCODING_UTF8 )).getStr() ); } } SdrRectObj::SetModel( pNewModel ); // #i43086# // #i85304 redo the change for charts for the above bugfix, as #i43086# does not occur anymore //so maybe the ImpSetVisAreaSize call can be removed here completely //Nevertheless I leave it in for other objects as I am not sure about the side effects when removing now if( pModel && !pModel->isLocked() && !IsChart() ) ImpSetVisAreaSize(); if( pDestPers && !IsEmptyPresObj() ) { if ( !pSrcPers || IsEmptyPresObj() ) // object wasn't connected, now it should be Connect_Impl(); else Reconnect_Impl(); } AddListeners_Impl(); } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetPage(SdrPage* pNewPage) { bool bRemove=pNewPage==NULL && pPage!=NULL; bool bInsert=pNewPage!=NULL && pPage==NULL; if (bRemove && mpImpl->mbConnected ) Disconnect(); if(!pModel && !GetStyleSheet() && pNewPage->GetModel()) { // #i119287# Set default StyleSheet for SdrGrafObj here, it is different from 'Default'. This // needs to be done before the style 'Default' is set from the :SetModel() call which is triggered // from the following :SetPage(). // TTTT: Needs to be moved in branch aw080 due to having a SdrModel from the beginning, is at this // place for convenience currently (works in both versions, is not in the way) SfxStyleSheet* pSheet = pNewPage->GetModel()->GetDefaultStyleSheetForSdrGrafObjAndSdrOle2Obj(); if(pSheet) { SetStyleSheet(pSheet, false); } else { SetMergedItem(XFillStyleItem(XFILL_NONE)); SetMergedItem(XLineStyleItem(XLINE_NONE)); } } SdrRectObj::SetPage(pNewPage); if (bInsert && !mpImpl->mbConnected ) Connect(); } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetObjRef( const com::sun::star::uno::Reference < com::sun::star::embed::XEmbeddedObject >& rNewObjRef ) { DBG_ASSERT( !rNewObjRef.is() || !xObjRef.GetObject().is(), "SetObjRef called on already initialized object!"); if( rNewObjRef == xObjRef.GetObject() ) return; // the caller of the method is responsible to control the old object, it will not be closed here // Otherwise WW8 import crashes because it transfers control to OLENode by this method if ( xObjRef.GetObject().is() ) xObjRef.Lock( sal_False ); // avoid removal of object in Disconnect! It is definitely a HACK to call SetObjRef(0)! // This call will try to close the objects; so if anybody else wants to keep it, it must be locked by a CloseListener xObjRef.Clear(); if ( mpImpl->mbConnected ) Disconnect(); xObjRef.Assign( rNewObjRef, GetAspect() ); m_bTypeAsked = false; if ( xObjRef.is() ) { DELETEZ( pGraphic ); if ( (xObjRef->getStatus( GetAspect() ) & embed::EmbedMisc::EMBED_NEVERRESIZE ) ) SetResizeProtect(sal_True); // For math objects, set closed state to transparent SetClosedObj(!ImplIsMathObj( rNewObjRef )); Connect(); } SetChanged(); BroadcastObjectChange(); } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetClosedObj( bool bIsClosed ) { // TODO/LATER: do we still need this hack? // Allow changes to the closed state of OLE objects bClosedObj = bIsClosed; } // ----------------------------------------------------------------------------- SdrObject* SdrOle2Obj::getFullDragClone() const { // #i118485# use central replacement generator return createSdrGrafObjReplacement(false, true); } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetPersistName( const OUString& rPersistName ) { DBG_ASSERT( mpImpl->aPersistName.isEmpty(), "Persist name changed!"); mpImpl->aPersistName = rPersistName; mpImpl->mbLoadingOLEObjectFailed = false; Connect(); SetChanged(); } void SdrOle2Obj::AbandonObject() { mpImpl->aPersistName = ""; mpImpl->mbLoadingOLEObjectFailed = false; SetObjRef(0); } // ----------------------------------------------------------------------------- OUString SdrOle2Obj::GetPersistName() const { return mpImpl->aPersistName; } // ----------------------------------------------------------------------------- void SdrOle2Obj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const { // #i118485# Allowing much more attributes for OLEs rInfo.bRotateFreeAllowed = true; rInfo.bRotate90Allowed = true; rInfo.bMirrorFreeAllowed = true; rInfo.bMirror45Allowed = true; rInfo.bMirror90Allowed = true; rInfo.bTransparenceAllowed = true; rInfo.bGradientAllowed = true; rInfo.bShearAllowed = true; rInfo.bEdgeRadiusAllowed = false; rInfo.bNoOrthoDesired = false; rInfo.bCanConvToPath = true; rInfo.bCanConvToPoly = true; rInfo.bCanConvToPathLineToArea = false; rInfo.bCanConvToPolyLineToArea = false; rInfo.bCanConvToContour = true; } // ----------------------------------------------------------------------------- sal_uInt16 SdrOle2Obj::GetObjIdentifier() const { return bFrame ? sal_uInt16(OBJ_FRAME) : sal_uInt16(OBJ_OLE2); } // ----------------------------------------------------------------------------- OUString SdrOle2Obj::TakeObjNameSingul() const { OUStringBuffer sName(ImpGetResStr(bFrame ? STR_ObjNameSingulFrame : STR_ObjNameSingulOLE2)); const OUString aName(GetName()); if (!aName.isEmpty()) { sName.append(" '"); sName.append(aName); sName.append('\''); } return sName.makeStringAndClear(); } // ----------------------------------------------------------------------------- OUString SdrOle2Obj::TakeObjNamePlural() const { return ImpGetResStr(bFrame ? STR_ObjNamePluralFrame : STR_ObjNamePluralOLE2); } // ----------------------------------------------------------------------------- SdrOle2Obj* SdrOle2Obj::Clone() const { return CloneHelper< SdrOle2Obj >(); } SdrOle2Obj& SdrOle2Obj::operator=(const SdrOle2Obj& rObj) { //TODO/LATER: who takes over control of my old object?! if( &rObj != this ) { // #116235# // ImpAssign( rObj ); const SdrOle2Obj& rOle2Obj = static_cast< const SdrOle2Obj& >( rObj ); uno::Reference < util::XCloseable > xClose( xObjRef.GetObject(), uno::UNO_QUERY ); if( pModel && mpImpl->mbConnected ) Disconnect(); SdrRectObj::operator=( rObj ); // Manually copying bClosedObj attribute SetClosedObj( rObj.IsClosedObj() ); mpImpl->aPersistName = rOle2Obj.mpImpl->aPersistName; aProgName = rOle2Obj.aProgName; bFrame = rOle2Obj.bFrame; if( rOle2Obj.pGraphic ) { if( pGraphic ) { delete pGraphic; delete mpImpl->pGraphicObject; } pGraphic = new Graphic( *rOle2Obj.pGraphic ); mpImpl->pGraphicObject = new GraphicObject( *pGraphic ); } if( pModel && rObj.GetModel() && !IsEmptyPresObj() ) { ::comphelper::IEmbeddedHelper* pDestPers = pModel->GetPersist(); ::comphelper::IEmbeddedHelper* pSrcPers = rObj.GetModel()->GetPersist(); if( pDestPers && pSrcPers ) { DBG_ASSERT( !xObjRef.is(), "Object already existing!" ); comphelper::EmbeddedObjectContainer& rContainer = pSrcPers->getEmbeddedObjectContainer(); uno::Reference < embed::XEmbeddedObject > xObj = rContainer.GetEmbeddedObject( mpImpl->aPersistName ); if ( xObj.is() ) { OUString aTmp; xObjRef.Assign( pDestPers->getEmbeddedObjectContainer().CopyAndGetEmbeddedObject( rContainer, xObj, aTmp ), rOle2Obj.GetAspect() ); m_bTypeAsked = false; mpImpl->aPersistName = aTmp; CheckFileLink_Impl(); } Connect(); } } } return *this; } // ----------------------------------------------------------------------------- void SdrOle2Obj::ImpSetVisAreaSize() { // #i118524# do not again set VisAreaSize when the call comes from OLE client (e.g. ObjectAreaChanged) if(mbSuppressSetVisAreaSize) return; // currently there is no need to recalculate scaling for iconified objects // TODO/LATER: it might be needed in future when it is possible to change the icon if ( GetAspect() == embed::Aspects::MSOLE_ICON ) return; // the object area of an embedded object was changed, e.g. by user interaction an a selected object GetObjRef(); if ( xObjRef.is() ) { OSL_ASSERT( pModel ); sal_Int64 nMiscStatus = xObjRef->getStatus( GetAspect() ); // the client is required to get access to scaling SfxInPlaceClient* pClient = SfxInPlaceClient::GetClient( dynamic_cast(pModel->GetPersist()), xObjRef.GetObject() ); bool bHasOwnClient = ( mpImpl->pLightClient && xObjRef->getClientSite() == uno::Reference< embed::XEmbeddedClient >( mpImpl->pLightClient ) ); if ( pClient || bHasOwnClient ) { // TODO: IMHO we need to do similar things when object is UIActive or OutplaceActive?! if ( ((nMiscStatus & embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE) && svt::EmbeddedObjectRef::TryRunningState( xObjRef.GetObject() )) || xObjRef->getCurrentState() == embed::EmbedStates::INPLACE_ACTIVE ) { Fraction aScaleWidth; Fraction aScaleHeight; if ( pClient ) { aScaleWidth = pClient->GetScaleWidth(); aScaleHeight = pClient->GetScaleHeight(); } else { aScaleWidth = mpImpl->pLightClient->GetScaleWidth(); aScaleHeight = mpImpl->pLightClient->GetScaleHeight(); } // The object wants to resize itself (f.e. Chart wants to recalculate the layout) // or object is inplace active and so has a window that must be resized also // In these cases the change in the object area size will be reflected in a change of the // objects' visual area. The scaling will not change, but it might exist already and must // be used in calculations MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObjRef->getMapUnit( GetAspect() ) ); Size aVisSize( (long)( Fraction( aRect.GetWidth() ) / aScaleWidth ), (long)( Fraction( aRect.GetHeight() ) / aScaleHeight ) ); aVisSize = OutputDevice::LogicToLogic( aVisSize, pModel->GetScaleUnit(), aMapUnit); awt::Size aSz; aSz.Width = aVisSize.Width(); aSz.Height = aVisSize.Height(); xObjRef->setVisualAreaSize( GetAspect(), aSz ); try { aSz = xObjRef->getVisualAreaSize( GetAspect() ); } catch( embed::NoVisualAreaSizeException& ) {} Rectangle aAcceptedVisArea; aAcceptedVisArea.SetSize( Size( (long)( Fraction( long( aSz.Width ) ) * aScaleWidth ), (long)( Fraction( long( aSz.Height ) ) * aScaleHeight ) ) ); if (aVisSize != aAcceptedVisArea.GetSize()) { // server changed VisArea to its liking and the VisArea is different than the suggested one // store the new value as given by the object MapUnit aNewMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObjRef->getMapUnit( GetAspect() ) ); aRect.SetSize(OutputDevice::LogicToLogic( aAcceptedVisArea.GetSize(), aNewMapUnit, pModel->GetScaleUnit())); } // make the new object area known to the client // compared to the "else" branch aRect might have been changed by the object and no additional scaling was applied // WHY this -> OSL_ASSERT( pClient ); if( pClient ) pClient->SetObjArea(aRect); // we need a new replacement image as the object has resized itself //#i79578# don't request a new replacement image for charts to often //a chart sends a modified call to the framework if it was changed //thus the replacement update is already handled there if( !IsChart() ) xObjRef.UpdateReplacement(); } else { // The object isn't active and does not want to resize itself so the changed object area size // will be reflected in a changed object scaling Fraction aScaleWidth; Fraction aScaleHeight; Size aObjAreaSize; if ( CalculateNewScaling( aScaleWidth, aScaleHeight, aObjAreaSize ) ) { if ( pClient ) { Rectangle aScaleRect(aRect.TopLeft(), aObjAreaSize); pClient->SetObjAreaAndScale( aScaleRect, aScaleWidth, aScaleHeight); } else { mpImpl->pLightClient->SetSizeScale( aScaleWidth, aScaleHeight ); } } } } else if( (nMiscStatus & embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE) && svt::EmbeddedObjectRef::TryRunningState( xObjRef.GetObject() ) ) { //also handle not sfx based ole objects e.g. charts //#i83860# resizing charts in impress distorts fonts uno::Reference< embed::XVisualObject > xVisualObject( this->getXModel(), uno::UNO_QUERY ); if( xVisualObject.is() ) { MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObjRef->getMapUnit( GetAspect() ) ); Point aTL( aRect.TopLeft() ); Point aBR( aRect.BottomRight() ); Point aTL2( OutputDevice::LogicToLogic( aTL, pModel->GetScaleUnit(), aMapUnit) ); Point aBR2( OutputDevice::LogicToLogic( aBR, pModel->GetScaleUnit(), aMapUnit) ); Rectangle aNewRect( aTL2, aBR2 ); xVisualObject->setVisualAreaSize( GetAspect(), awt::Size( aNewRect.GetWidth(), aNewRect.GetHeight() ) ); } } } } // ----------------------------------------------------------------------------- void SdrOle2Obj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) { if( pModel && !pModel->isLocked() ) { GetObjRef(); if ( xObjRef.is() && ( xObjRef->getStatus( GetAspect() ) & embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE ) ) { // if the object needs recompose on resize // the client site should be created before the resize will take place // check whether there is no client site and create it if necessary AddOwnLightClient(); } } SdrRectObj::NbcResize(rRef,xFact,yFact); if( pModel && !pModel->isLocked() ) ImpSetVisAreaSize(); } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetGeoData(const SdrObjGeoData& rGeo) { SdrRectObj::SetGeoData(rGeo); if( pModel && !pModel->isLocked() ) ImpSetVisAreaSize(); } // ----------------------------------------------------------------------------- void SdrOle2Obj::NbcSetSnapRect(const Rectangle& rRect) { SdrRectObj::NbcSetSnapRect(rRect); if( pModel && !pModel->isLocked() ) ImpSetVisAreaSize(); if ( xObjRef.is() && IsChart() ) { //#i103460# charts do not necessarily have an own size within ODF files, //for this case they need to use the size settings from the surrounding frame, //which is made available with this method as there is no other way xObjRef.SetDefaultSizeForChart( Size( rRect.GetWidth(), rRect.GetHeight() ) ); } } // ----------------------------------------------------------------------------- void SdrOle2Obj::NbcSetLogicRect(const Rectangle& rRect) { SdrRectObj::NbcSetLogicRect(rRect); if( pModel && !pModel->isLocked() ) ImpSetVisAreaSize(); } const Graphic* SdrOle2Obj::GetGraphic() const { if ( xObjRef.is() ) return xObjRef.GetGraphic(); return pGraphic; } void SdrOle2Obj::GetNewReplacement() { if ( xObjRef.is() ) xObjRef.UpdateReplacement(); } // ----------------------------------------------------------------------------- Size SdrOle2Obj::GetOrigObjSize( MapMode* pTargetMapMode ) const { return xObjRef.GetSize( pTargetMapMode ); } // ----------------------------------------------------------------------------- void SdrOle2Obj::NbcMove(const Size& rSize) { SdrRectObj::NbcMove(rSize); if( pModel && !pModel->isLocked() ) ImpSetVisAreaSize(); } // ----------------------------------------------------------------------------- sal_Bool SdrOle2Obj::CanUnloadRunningObj( const uno::Reference< embed::XEmbeddedObject >& xObj, sal_Int64 nAspect ) { sal_Bool bResult = sal_False; sal_Int32 nState = xObj->getCurrentState(); if ( nState == embed::EmbedStates::LOADED ) { // the object is already unloaded bResult = sal_True; } else { uno::Reference < util::XModifiable > xModifiable( xObj->getComponent(), uno::UNO_QUERY ); if ( !xModifiable.is() ) bResult = sal_True; else { sal_Int64 nMiscStatus = xObj->getStatus( nAspect ); if ( embed::EmbedMisc::MS_EMBED_ALWAYSRUN != ( nMiscStatus & embed::EmbedMisc::MS_EMBED_ALWAYSRUN ) && embed::EmbedMisc::EMBED_ACTIVATEIMMEDIATELY != ( nMiscStatus & embed::EmbedMisc::EMBED_ACTIVATEIMMEDIATELY ) && !( xModifiable.is() && xModifiable->isModified() ) && !( nState == embed::EmbedStates::INPLACE_ACTIVE || nState == embed::EmbedStates::UI_ACTIVE || nState == embed::EmbedStates::ACTIVE ) ) { bResult = sal_True; } } } return bResult; } // ----------------------------------------------------------------------------- sal_Bool SdrOle2Obj::Unload( const uno::Reference< embed::XEmbeddedObject >& xObj, sal_Int64 nAspect ) { sal_Bool bResult = sal_False; if ( CanUnloadRunningObj( xObj, nAspect ) ) { try { xObj->changeState( embed::EmbedStates::LOADED ); bResult = sal_True; } catch( ::com::sun::star::uno::Exception& ) { OSL_FAIL( OString(OString("SdrOle2Obj::Unload=(), " "exception caught: ") + OUStringToOString( comphelper::anyToString( cppu::getCaughtException() ), RTL_TEXTENCODING_UTF8 )).getStr() ); } } return bResult; } // ----------------------------------------------------------------------------- sal_Bool SdrOle2Obj::Unload() { sal_Bool bUnloaded = sal_False; if( xObjRef.is() ) { //TODO/LATER: no refcounting tricks anymore! //"customers" must register as state change listeners // Not necessary in Doc DTor (MM) //sal_uIntPtr nRefCount = (*ppObjRef)->GetRefCount(); // prevent Unload if there are external references //if( nRefCount > 2 ) // return sal_False; //DBG_ASSERT( nRefCount == 2, "Wrong RefCount for unload" ); } else bUnloaded = sal_True; if ( pModel && xObjRef.is() ) { bUnloaded = Unload( xObjRef.GetObject(), GetAspect() ); } return bUnloaded; } // ----------------------------------------------------------------------------- void SdrOle2Obj::GetObjRef_Impl() { if ( !xObjRef.is() && !mpImpl->aPersistName.isEmpty() && pModel && pModel->GetPersist() ) { // Only try loading if it did not went wrong up to now if(!mpImpl->mbLoadingOLEObjectFailed) { xObjRef.Assign( pModel->GetPersist()->getEmbeddedObjectContainer().GetEmbeddedObject( mpImpl->aPersistName ), GetAspect() ); m_bTypeAsked = false; CheckFileLink_Impl(); // If loading of OLE object failed, remember that to not invoke a endless // loop trying to load it again and again. if( xObjRef.is() ) { mpImpl->mbLoadingOLEObjectFailed = true; } // For math objects, set closed state to transparent SetClosedObj(!ImplIsMathObj( xObjRef.GetObject() )); } if ( xObjRef.is() ) { if( !IsEmptyPresObj() ) { // remember modified status of model const sal_Bool bWasChanged(pModel ? pModel->IsChanged() : sal_False); // perhaps preview not valid anymore // This line changes the modified state of the model SetGraphic_Impl( NULL ); // if status was not set before, force it back // to not set, so that SetGraphic(0L) above does not // set the modified state of the model. if(!bWasChanged && pModel && pModel->IsChanged()) { pModel->SetChanged( sal_False ); } } sal_Int64 nMiscStatus = xObjRef->getStatus( GetAspect() ); (void)nMiscStatus; //TODO/LATER: wait until ResizeOnPrinterChange is defined //if ( nMiscStatus & SVOBJ_MISCSTATUS_RESIZEONPRINTERCHANGE ) { if (pModel && pModel->GetRefDevice() && pModel->GetRefDevice()->GetOutDevType() == OUTDEV_PRINTER) { if(!bInDestruction) { //TODO/LATER: printerchange notification /* // prevent SetModified (don't want no update here) sal_Bool bWasEnabled = (*ppObjRef)->IsEnableSetModified(); if ( bWasEnabled ) (*ppObjRef)->EnableSetModified( sal_False ); // Kein RefDevice oder RefDevice kein Printer Printer* pPrinter = (Printer*) pModel->GetRefDevice(); (*ppObjRef)->OnDocumentPrinterChanged( pPrinter ); // reset state (*ppObjRef)->EnableSetModified( bWasEnabled );*/ } } } } if ( xObjRef.is() ) Connect(); } if ( mpImpl->mbConnected ) // move object to first position in cache GetSdrGlobalData().GetOLEObjCache().InsertObj(this); } uno::Reference < embed::XEmbeddedObject > SdrOle2Obj::GetObjRef() const { const_cast(this)->GetObjRef_Impl(); return xObjRef.GetObject(); } uno::Reference < embed::XEmbeddedObject > SdrOle2Obj::GetObjRef_NoInit() const { return xObjRef.GetObject(); } // ----------------------------------------------------------------------------- uno::Reference< frame::XModel > SdrOle2Obj::getXModel() const { GetObjRef(); if ( svt::EmbeddedObjectRef::TryRunningState(xObjRef.GetObject()) ) return uno::Reference< frame::XModel >( xObjRef->getComponent(), uno::UNO_QUERY ); else return uno::Reference< frame::XModel >(); } // ----------------------------------------------------------------------------- sal_Bool SdrOle2Obj::IsChart() const { if ( !m_bTypeAsked ) { m_bChart = ChartHelper::IsChart(xObjRef); m_bTypeAsked = true; } return m_bChart; } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetGraphicToObj( const Graphic& aGraphic, const OUString& aMediaType ) { xObjRef.SetGraphic( aGraphic, aMediaType ); } // ----------------------------------------------------------------------------- void SdrOle2Obj::SetGraphicToObj( const uno::Reference< io::XInputStream >& xGrStream, const OUString& aMediaType ) { xObjRef.SetGraphicStream( xGrStream, aMediaType ); } // ----------------------------------------------------------------------------- sal_Bool SdrOle2Obj::IsCalc() const { if ( !xObjRef.is() ) return false; SvGlobalName aObjClsId( xObjRef->getClassID() ); if( SvGlobalName(SO3_SC_CLASSID_30) == aObjClsId || SvGlobalName(SO3_SC_CLASSID_40) == aObjClsId || SvGlobalName(SO3_SC_CLASSID_50) == aObjClsId || SvGlobalName(SO3_SC_CLASSID_60) == aObjClsId || SvGlobalName(SO3_SC_OLE_EMBED_CLASSID_60) == aObjClsId || SvGlobalName(SO3_SC_OLE_EMBED_CLASSID_8) == aObjClsId || SvGlobalName(SO3_SC_CLASSID) == aObjClsId ) { return sal_True; } return sal_False; } // ----------------------------------------------------------------------------- uno::Reference< frame::XModel > SdrOle2Obj::GetParentXModel() const { uno::Reference< frame::XModel > xDoc; if ( pModel ) xDoc.set( pModel->getUnoModel(),uno::UNO_QUERY); return xDoc; } // ----------------------------------------------------------------------------- sal_Bool SdrOle2Obj::CalculateNewScaling( Fraction& aScaleWidth, Fraction& aScaleHeight, Size& aObjAreaSize ) { // TODO/LEAN: to avoid rounding errors scaling always uses the VisArea. // If we don't cache it for own objects also we must load the object here if ( !xObjRef.is() || !pModel ) return sal_False; MapMode aMapMode( pModel->GetScaleUnit() ); aObjAreaSize = xObjRef.GetSize( &aMapMode ); Size aSize = aRect.GetSize(); aScaleWidth = Fraction(aSize.Width(), aObjAreaSize.Width() ); aScaleHeight = Fraction(aSize.Height(), aObjAreaSize.Height() ); // reduce to 10 binary digits Kuerzen(aScaleHeight, 10); Kuerzen(aScaleWidth, 10); return sal_True; } // ----------------------------------------------------------------------------- sal_Bool SdrOle2Obj::AddOwnLightClient() { // The Own Light Client must be registered in object only using this method! if ( !SfxInPlaceClient::GetClient( dynamic_cast(pModel->GetPersist()), xObjRef.GetObject() ) && !( mpImpl->pLightClient && xObjRef->getClientSite() == uno::Reference< embed::XEmbeddedClient >( mpImpl->pLightClient ) ) ) { Connect(); if ( xObjRef.is() && mpImpl->pLightClient ) { Fraction aScaleWidth; Fraction aScaleHeight; Size aObjAreaSize; if ( CalculateNewScaling( aScaleWidth, aScaleHeight, aObjAreaSize ) ) { mpImpl->pLightClient->SetSizeScale( aScaleWidth, aScaleHeight ); try { xObjRef->setClientSite( mpImpl->pLightClient ); return sal_True; } catch( uno::Exception& ) {} } } return sal_False; } return sal_True; } ////////////////////////////////////////////////////////////////////////////// Graphic SdrOle2Obj::GetEmptyOLEReplacementGraphic() { return Graphic(BitmapEx(ResId(BMP_SVXOLEOBJ, *ImpGetResMgr()))); } ////////////////////////////////////////////////////////////////////////////// void SdrOle2Obj::SetWindow(const com::sun::star::uno::Reference < com::sun::star::awt::XWindow >& _xWindow) { if ( xObjRef.is() && mpImpl->pLightClient ) { mpImpl->pLightClient->setWindow(_xWindow); } } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */